Development of some boxes to check buttons or radio system are not visible

Hello

I have a problem while UI-programming:

On my severel window controls, some of them are system check boxes. Each of them should get the orientation main while tabbing through them.

Now the problem: one of them obviously does not show focus.

See the following pictures:

Did I miss an option to hide the focus?

I became ornaments on it and experiment a little. Newly inserted checkboxes work how expected, but if I replace the box against an option button, it is not also see the update.

Once the code changes the focus programmatically, the focus begins to work how it is planned, but why is that happening?

Edit: I'm using LV 2011

Hi again,

I found it!

Norbert_B wrote:

Can you make sure that the boxes are "above all"? That change things?

Norbert

against your advice, "move backward" made the turn.

This is a rather strange behavior. Times, the list box and the box are in the empty space (square directly in front of the VI pane), do overlap. In addition, there an inactive button between them (located and in the tab order).

If the box is a layer on top of the listbox and the listbox control is in the background (the lowest layer of the focusable objects), then the box is not able to display it is focus state, but only if the tab moves the focus directly from the list box to the box. Thus, if the listbox is the foreground object and other controls (checkbox, radio button,...) behind him, then it works. Moreover, the listbox control displays always the focus correctly, or if the button is enabled all of the controls are functioning as intended.

Thanks to Norbert_B for bringing me on the right track.

Someone at - it an idea what causes this focus problem? Maybe it's a bug in the Qt code? If this isn't the case, I'll mark this message as a response.

See you soon,.

Gerhard

Tags: NI Software

Similar Questions

  • Operations are not visible in the viewport in the develop module only in the browser window.

    1.I have a very strange problem with Lightroom 6.5 and earlier versions had some of the problems (so little reliable, because I don't know what time it will happen again) Lightroom if I work after a while, the following occurs: in the large screen of the applied rendering operations are not visible, only the small window of browser. In the middle of the screen is NOTHING done, so I continued to work on the image in the window of exploitation and not the image disappears, just a gray window remains above. Dan I switch to another view and then be visible again (but operations also do not appear this, only in small browser window displays the changes applied) I have to restart your PC for vouchers, which sometimes does not occur when you restart. Function the GPU turned power off.

    2. at this moment, there is a new problem starting.

    Lightroom begins only with color boxes in the grid, no image is visible


    My system configuration: Windows 7, 64-bit Intel Core i7 - 3770 k CPU 3.50 GHz 16.0 GB RAM ATI RADEON 4800 series

    This could be caused by a defective monitor profile.

    As a diagnosis too, l and, possibly, a temporary solution, try to set the monitor to sRGB profile.

    If this solves the problem, you need to calibrate the monitor with a standard material.

    This will create a new profile that accurately describes your monitor.

    Press the Windows key + R, type colorcpl, and then press ENTER.

    Add the sRGB profile, and then set as default profile.

  • Buttons on the Panel are not more enlightened

    Buttons on the Panel are not more enlightened. How can I solve this?

    Enter the parameters of the BIOS (F2 at startup) and under Advanced BIOS options you will find LED illumination. Set it on, save the BIOS settings and restart your laptop.

    Does that help?

  • I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

    I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

    Please give as much information as possible on your support. The video and audio works in QuickTime player? What are the specifications of media?

  • Vignette to locate some ppsx files are not visible in windows Explorer

    I have windows 7. Thumbnails for some of my .ppsx files are not visible in Windows Explorer, while the other .ppsx files are visible as thumbnails. I have attached a screenshot to show that 8 .ppsx files, 6 display their thumbnails while the 2 only.

    Try this option.  Open your file in PowerPoint.  Then go to the file menu.  To the right, choose Properties, and then view the advanced properties:

    Make sure that the image 'Save Preview' is turned on:

  • SqlDev 4.0.2: In Look & Feel 'Metal' of some UI elements are not visible

    "SqlDev 4.0.2: in Look & Feel @Metal" some elements of the user interface are not visible

    Standart-

    oracle.png

    Metal-

    metal.png

    Of course, I could drop the java team a note and see what they say... assuming you're on a supported platform. Or you can go to the Java community directly.

  • Some sites say cookies are blocked and I can't use certain features on these sites. But I check every time, and cookies are not blocked.

    Sites to say I can't set preferences or post on the forums, etc. because cookies are blocked. I know how to create cookies. They are NOT blocked.

    Have you checked the cookie for the current domain permissions in "tools > Page Info > Permissions" once you have opened this page?

    If the setting in Firefox is OK, then check your security software (firewall) to ensure cookies aren't blocked here.

  • Boxes to check the total Radio

    Hello

    I struggled with this for about a day, and I'll be the first to admit that my Javascript is not terrible... anyway, here goes:

    I have a form with a checkbox grid (4 across and 13 down.)

    Column 1 Column 2 Column 3 Column 4
    x---------
    ------x---
    ------x---
    x---------
    ---------x
    ------------
    ------------
    ------------
    ------------
    ------------
    ------------
    ------------
    ------------

    Lines allow one entry per line maximum (which I built all the checkboxes with the same name... i). e rank [1] the first line boxes, file [2] for the second, etc.). Also, each column of the box has a different value of export (all the boxes in column 1 have an export value of 0, column 2 = 1, etc.). BTW, I'm not with radio buttons because of the 'rigidity' inherent to not be able to uncheck a checked line.

    My intention is to calculate the amount of boxes checked in each column. In the above example, it should return a value of 2 for the first column.  I use a calculation script for the first total column that goes something like this:

    var i = 0; tot0 = 0; for (i = 0; I < = 13; i ++) {if (rank [i] .value == "0") {tot0 = tot0 + 1 ;} ;};} this.getField ('totChoice1') = tot0;

    Of course, the script is not what I intended, or I wouldn't post here . So I need a little help.

    Thanks a bunch,

    Ryne

    I just noticed that I starts at 0, but you said that your fields are called "classify1", etc.. So I should start from 1, not 0.

  • Firefox will not prompt to remember the password even if the box is checked to remember; also, I'm not in private browing mode.

    I go to tools > Options > Security and check 'Remember password' but after visiting another site and enter a password there is no prompt to remember then when I come back to the tool > Options > security, the box is unchecked. All of the suggestions.

    Thanks to you all for your suggestions. I discovered the cause of the problem and that's because I had installed Xfinity constant guard and it was Zap all saved passwords and unchecking the box of Firefox options.

    After that I uninstalled it, Firefox works normally.

  • buttons, links of Web page, the options are not visible until I have the mouse on the box

    As in this detail window that I'm filled, there are some blue vertical lines, but no text appears until I have the mouse on each box. I use an Acer Aspire 5100 with Windows XP Pro 2002 with service pak 3 installed. I think that this problem started last summer when I installed service pak 3 or installed Windows Security Essentials. At the same time, I started having trouble with the issue of "jumping cursor" that has been requested here countless times.

    I have Firefox and I.Explorer and both have the same problems.

    EVERYONE, you have any suggestions or succeeded fixing this problem.

    Hey Chinkapin,.

    In addition to advice of Gokul, I think it would be a good idea to update your drivers for your computer laptop touchpad, I saw a lot of problems here. Follow this thread and this thread here to see others with this issue describes what worked for him.
    Also, if you still have questions, you said it started when you installed Service Pack 3, I think it's a good test to do back up to Service Pack 2 (uninstall SP3) and see if your PC is back to normal, there might be a conflict between something on your system and the service pack. To help with that follow this link here.
    So give those a try and let me know your results. Thanks for posting!
  • Some Web sites have been expanded, while others are not, how to reduce them since I can't find the button to the view/image?

    Sometimes I fall asleep with my laptop next to me and then I wake up with a webiste, i.e. from facebook, and it is seen in about three times the size of look one. Basically when I go on this site that it's three times the normal size, but not all sites are like that. Just the one I was on. I can't find the view/image button to minimize the return to the normal display. Where is it on the new firefox?

    Try CTRL + (ZERO)

  • Could use some advice - My AV button on my remote switch not entered for 610q

    Hope that anyone with a TouchSmart 610 1180qd could comment as to whether or not their touch AV on the remote control allows to switch their contributions from sources on the computer?  I just switched the computer to the problem and the other does the same thing.   I can spend using the PIP software without problem.   Have spent hours with technical support and it doesn't seem to be a ready solution - wondering if it's just a defect in design with the model.

    I hope that anyone with a similar model could let me know if it works for them or not, so I can assess what to do next.

    Thanks for the comments!

    I spoke with Tech Support again and think I got an answer that makes sense.  It seems that the problem is related to the ATI graphics card (my setup is 2GB ATI 5570 card) and the Intel processor and its interaction with the HDMI ports.  The alternative would be to reconfigure the computer to the NVIDIA card (whose only confirures with the 1 GB card for this version of the computer) or the reconfirure with the AMD processor.

    I think I'll just live with the lack of functionality and keep the computer configured as it is.

  • Some kind of problem with versioning... are not updated packages?

    My project through to many version last year. The current version in stores is 1.8.7.

    I'm looking to build Phonegap and he said that the current version is 1.1.7. I used the QR Scanner to download on my iPad as a test and it is indeed a very old version. I looked at my www.zip to see if it was somehow an old version (not really possible), and this certainly isn't. The version number indicates 1.8.8 in config and all the HTML code is different.

    I have no idea why Phonegap Build sends this really old version. I have not changed anything significant in the last week or more. Just some general changes to markup and a version increase. I also had problems with corrupted on previous Android (https://forums.adobe.com/thread/2213956) packets and I think maybe it's an attempt to downgrade due to this same issue.

    Somebody else confirm?

    Looking at the output of tree of your zip file, it seems that you have a second www folder nested within your application, which probably has an old copy of your application. The build system might use (wrongly) that badly nested www. Could check through all the folders nested in your zip? Or send your zip to [email protected] so that we can have a look?

  • Some profiles running at the same time, others are not

    I have three 'profiles' that I use for firefox (a general, a working one and locked). I can load them with the '-p' option on the command-line very well. If no firefox runs, and then one of them works perfectly. So I think I have the basics working properly.

    However, two of the profiles (work and general) does not work at the same time. But that locked will run with either of the other two. I cannot understand why and I'm looking for some clues on the newspapers to activate or to debug levels to raise or parameters to twist inside (or outside) profiles.

    Specifically, by "does not work", I mean that if 'general' profile firefox is running, so if I start my work profile (i.e., "PEI working firefox"), he has just opened a new window on the current general profile. If I open the locked profile (i.e., "firefox Pei lockdown") which appears fine (starts a separate instance of firefox, with its own plugins and whatnot).

    I had this problem for a long time (many version of Firefox, before even the 3.0, I think). I have this problem on Windows (but WinXP and now Win7).

    I am comfortable with tweaking the settings and looking through the logs, but not sure what to activate. Google searches have not been successful (it seems to be relatively few people using Firefox profiles).

    You can get Firefox to run different profiles simultaneously by adding-no option command line remotely and more of the P-

    For more information, see opening a new instance of your application of Mozilla with a different profile - MozillaZine Knowledge Base

  • Bounding box, path points and control are not visible

    When I select an element, in this case of a building, to make changes, the entire file is selected instead of the building. There is nothing to separate when this happens. Can someone tell me how to solve this problem? Thank you

    PK,

    You can have a look for the mask of clipping or other means to disguise the work. You can start looking at the layers palette/Panel (expand as needed).

    Assuming that we are talking not only about view > Show Bounding Box (or Show Edges).

Maybe you are looking for

  • How to print multiple copies on a HP Envy 5540

    I'm running OS X 10.7.5. on an iMac. I recently bought a HP Envy 5540, connected wireless printer. It fails to print more than one copy at a time. I see nothing in the software or instructions to change it. Help please!

  • Satellite P500-12D adding 2nd HARD drive

    Toshiba UK say it is not possible to install a second drive in a P500-12D.The reason seems to be that the "bowl" for the second disk drive carrier is not sold.I was also told that the second drive Bay could not be used "on the model" but the sata con

  • Sony DSC W800 USB cable

    I wonder if anyone can help? I need a replacement USB cable from a camera Sony DSC-W800. Did someone knows what kind of cable, this camera uses and also where they can be purchased?

  • Problem of its satellite A80 129

    I bought the laptop Satellite A80-129 a few days ago. I decided to install Win XP Prof instead of Win XP Home, which came with the laptop. After installing all kinds of software, I noticed something weird. His knowledge was quite low. I checked all k

  • Satellite A660 - display problems, very dark display

    Hello I'm at the end of help please. I have a Toshiba Satellite A660 PSAW3A-07P00R. recently, it has been very, very dark display on the screen, almost impossible to see.I tried the following the problem solved. 1. set the brightness to the MAX in th