Device CanoScan-al pinchar el secúndario in el icono botton not me appears las tasks... There is that?

Similar Questions

• When I update my device I need to have the apple ID and I can not find and contact the owner of the first.

  Hello;

  I can't find the original owner of my camera.

  I can't have my Apple device Id. When I update my device I need to have the apple ID and I can not find and contact the owner of the first. And I have a lot of problem with this matter.please help me. Please unlock my device to activate locking Mode.Or maybe if I have the Apple Id for my camera I found the password.

  My phone number is:

  IMEI:

  *********

  ICCID:

  ********

  Serial No.:

  F2 * FFK

  Part number:

  ME300LL/A

  Please, please, please help me.

  best regards;

  Siavash

  
  

  < personal information under the direction of the host >
  

  Only the owner of the unit can remove locking activation. If you have the original receipt, you can try to take it to an Apple Store and ask them to do, otherwise return the unit to the person to whom it was purchased for a refund.

• One or more devices do not support multi-equipment tasks.

  Hello

  I work with 2 X USB series Renault (6356 USB).  I am acquiring data analog voltage of all 8 channels on the two Renault (total up to 16 analog inputs).  I need data acquisition to synchronize and trigger from an external digital source (a signal that I currently wired in A PFI0 of Dev).  I use a sampling frequency of 800 kHz and a 400 kS buffer size.

  I tried to use an express vi for two devices; two separate express vis for each device; and recently changed to DAQmx icons (as seen in the attachment).  Anyway, I get an error (error-201426: one or more devices do not support multi-equipment tasks.).  He referred then DevA and DevB as devices that do not support tasks.  I was under the impression that tasks multi-equipment agree with property X of the series.  I use NI-DAQmx 9.5.5.

  In the attached photo, I left most while loop.  The part of the diagram that I left out is just for viewing and recording of data, I've included parts, I felt it necessary to describe my problem.

  I would appreciate all the advice really.

  Thank you

  Leslie

  I think crossrulz is right. No worries, as they must be in separate tasks, your data is always synchronized as you want. You'll just have to do some things in the software, because not all the data will be returned in the same Bay of waveforms. What you can do is to create two tasks (one for each device), build an array of tasks, and when you do a reading, do it inside a loop for. concatenate the waveforms of each reading and you have a table of waveforms with all your data as if you read it in a single task. You also need to configure your second task to trigger the DevB/PFI0 and divide your trigger wire, he PFI0 wiring on each device.

• Printer does not immediately appear under device & printers on Windows Server 2012 R2 VM. Printers appears after 15-20 min or more.

  Hi team,

  I have a question where adding a network printer is successful. I can see the printer in the Device Manager and I can print as well. However, it does not immediately appear under devices and printers and takes a long time to appear. Can someone help me please as soon as possible?

  Thank you

  Anand N V

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Is there anyway that I can update all my devices. I do not use the Device Manager by clicking one at a time.

  Is there anyway that I can update all my devices. I do not use the Device Manager by clicking one at a time.

  I have windows vista 32 bit.
  -------------------------------------------------------------------------------------------------
  Re-edit:-I do not use the Device Manager to find all my drivers and by clicking on each of them... one at a time update.
  Y at - it another way to find and update the drivers at the same time and for free.

  Your question is too terse and contains too little information for anyone to
  help you.  Read this article and try again:

  http://support.Microsoft.com/kb/555375

• My E drive has stopped working and does not even appear as a device.

  I was copying an audio cd to a disc that has been in my E drive.  I took it out and it did not work.  I put a CD - R in the drive closed it and now it will not open and when I go to my computer the drive does not exist.  It only shows my drive D and F there.

  Hi ChristineMorgan,

  Method 1: Run the fixit available in the link below

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Let flow the fixit available in the article below and then check

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• If I have Windows Embedded POSReady 2009 license can I install Windows Embedded POSReady 7 on my device? Whether or not I need a license document saying that.

  If I have Windows Embedded POSReady 2009 license can I install Windows Embedded POSReady 7 on my device? Whether or not I need a license document saying that.

  You should ask on the forum dedicated Windows Embedded:

  TechNet - Windows Embedded - Microsoft forums

• Sims 3 (win7) and "device 0 cannot run this title, no video graphics card supported not detected."

  Hello

  I just got the Sims 3 for Christmas, and I can't get it started.

  I just bought a new p7-1126 of hp computer that meets all the reqs as documented on the site of AMD System. (win7 64 bit, 1 TB hd, 6 GB ram, amd quad core 2.4 GHz processor)

  This computer has an amd radeon hd 6550d graph with / 3 gb (I think) (which is more than 128 MB recommended)

  and the drivers are up to date.

  I get the error message "device 0 cannot run this title, no video graphics card supported not detected" and I can't seem to do anything to solve this problem.

  I've uninstalled and reinstalled the Sims3 deluxe/ambitions three times now, with the expansion of ambitions installed so the third time.

  I did a lot of other things as suggested in line when I did research but nothing works.

  Help is appreciated and I hope we can get this fixed a problem. Thank you!!

  Hello

  Please provide information of the log of the event viewer.

  Information on the Event Viewer log shows that there is a problem with your memory (0xc0000005 error code).

  I suggest you run a diagnosis of memory on your computer and check if all goes well.

  Click on the links below and follow the instructions on the article to test memory on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• I signed up for photography CC, loaded on laptop main, when installing on my ASUS Transformer to only LR5.7 not CRD.  Determine the latest version that a device can run install?

  I signed up for photography CC, loaded on laptop main, when installing on my ASUS Transformer to only LR5.7 not CRD.  Determine the latest version that a device can run install?

  Yes.

• hardware device canoscan lide 20/30, no puedo instalar el driver del device con sodware original.

  En a portatil not con windows7 no canon escaner puedo instalar el driver del device box para un. CanoScan LIDE 20/30.

  Por favor en Español answering machine. Salu2 thanks.

  Please repost the language Spanish, forum hardware and drivers.

  Por favor, reenviar has the lengua Española of material, y el foro drivers.

  http://answers.Microsoft.com/es-ES/Windows/Forum/Windows_7-Hardware?tab=unanswered

• Device Canoscan

  Yesterday from since my scanner does not work. If I try to open it, tells me that a driver missing. I tried reinstalling the driver with his CD, there is no response.

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My facebook does not work on my laptop. theres a delay of 10 to 20 sec and it freezes.it works on my phone and kindle fine.and fair facebook is the only site that I have a problem with the help!

  My facebook is not loading properly it freezes and theres a delay.it of 10-20 sec worked very well for any other device.and that my laptop works properly on another site

  Hi Bobbi,

  The issue can be caused if the date and time is not properly defined.

  1. what browser do you use on your computer?

  2. you receive an error code or message?

  3. have you checked the issue with a different browser?

  First of all, let us try to launch the tool Internet and network by right clicking on the network in the notification area icon, click on solveand click Internet Connections. This utility can you ask questions or reset common settings as he tries to solve the problem. If running the tool network and Internet did not resolve this problem, follow the steps described in the following link and check if you are using Internet Explorer.

  Can't access some Web sites in Internet Explorer:

  http://support.Microsoft.com/kb/967897

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  If you need further assistance on this topic, let know us and we will be happy to help you.

• I do not know the e-mail or password that I used to start Firefox and will syc two Apple devices.

  I just bought a new i pod touch and an i pad. On both devices when I opened Firefox icon, it has two bars that show - they say send me instructions I did several times with no response and the other bar says I have a sync account which I do not know if I have or not. What is strange, is that eleven months ago, I bought an i phone 5 s and the icon of Firefox or the app works perfectly and opens as on my desktop computer. I've changed emails since I started with Firefox and you don't have any idea what password I used. I can't access any information without it. All e-mails are transferred on the earthlink account to gmail. I'm not a computer savy user and need help in simple terms. Thank you.

  I could understand it, but I appreciate your help.

• I have 5bdevices connected via iCloud and all are sync very well, except the iPhone 6 more. When I enter anything on any calendar except the iPhone, all devices to synchronize the event. It receives events but are not sent to them. Help!

  I have five Apple devices which are connected via iCloud. The only one who is not properly synchronized is the iPhone 6. It receives the calendar events, but will not send them.

  Please, try the following...

  1. First make sure that all of your settings are correct, that the calendar synchronization is checked on all devices (System Preferences > iCloud on a mac and settings > iCloud on iPhone, iPad, or iPod).
  2. Make sure the calendars that you use are in your "iCloud" and not a "on my Mac", "On My Phone" or other iCloud no account (you can do this by clicking / pressing the calendar button in the upper left corner of the application), iCloud no calendars will be not synchronize.
  3. If you are sure that everything is configured correctly and your calendars are in the iCloud account, you could try to uncheck syncing calendar in iCloud settings, reboot your device and then reactivating calendar sync settings.

• VISA devices with the same serial number and the vendor ID does not work (0xBFFF003A)

  Hi all

  I need to acquire the data of two meters of power YOKOGAWA with VISA driver (USB connection).

  They work very well if used alone, but they do not work when are used toghether. In particular, when I plug in and turn on the two of them, NOR MAX shows me the following error message:

  0XBFFF003A (VI_ERROR_INV_SETUP)

  viFindRsrc return 0xBFFF003A (cannot start the operation because the installer is not valid (because of attributes defined in an inconsistent state).)

  Please make sure that VISA is properly installed on this system.

  Possible causes of this error:
  1. more than one passport may be to attempt to claim the same resource.  You can try to disable passport to understand which Passport is the cause of the error.
  2 you have connected multiple no configured plug-and-play devices that have the same name of the resource. For example, the vendor ID and the serial number may be the same.

  In fact, according to MAX, both power meters have the same serial number and the same vendor ID; so, this seems to be the reason why they do not work together.

  Can someone help me?

  Thank you all