Device does not have save all pictures

Similar Questions

• CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  Try creating a new profile as a test to check whether your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• WSD Print device does not have a driver

  Help!  I have a new Pavilion of HP with Windows 7 Professional 64-bit Edition.  I'm trying to install a HP Officejet 4500 printer via a wireless router.  The computer detects the printer, but then gives me the error under Troubleshooting in devices and printers that the WSD print device does not pilot and therefore will not be installed.  There are other the home computers running Windows 7 that are able to connect and print.  Unfortunately, my son lost the printer installation cd so I downloaded the drivers on the internet and still get the above message. I tried even to connect the printer directly to the laptop and the laptop does not show even a usb connection.  I have completely restarted (with assistance from HP Support) the new operating system for laptop to factory settings and still am exp eriencing the same problems.

  Can I go to a friends house and the laptop will detect and install this printer with absolutely no problem... What should I do?

  Hello leo.choo,

  These are the drivers that are available for the HP OfficeJet 4500 printer.

  I see that there are two models of printers. I don't know which version you have printer HP Officejet 4500 G510g all-in-one or the 4500 G510n all-in-one HP Officejet printer. There are separate drivers for every model.

  I suggest you follow the link below, enter your model number to download the drivers for Officejet 4500 Wireless printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3986399

  You can follow the link below to run, download and run the utility:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114788&cc=us&LC=en&DLC=en&product=3986399&tmp_track_link=ot_search

  Or alternatively, you can download the drivers for the Windows 7 computer that works on another computer and use a thumb driver to copy on their computer and install it.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Help! WSD Print device does not have a driver

  Help, please! I have a Dell Inspiron N7110 with Windows 7 Home prem oa that I try to install an epson stylus nx420 printer via a wireless router.  The computer detects the printer, but then gives me the error under Troubleshooting in devices and printers that the WSD print device does not pilot and therefore will not be installed.  .  Unfortunately, my mother lost the printer installation cd so I downloaded the drivers on the internet and still get the above message. I tried even to connect the printer directly to the laptop and the laptop does not show even a usb connection.  I completely rebooted (with assistance from HP Support) the new operating system for laptop to factory settings and still exp the same problems... What should I do?

  Hey Elena,

  Until we provide troubleshooting steps, we would like to know as a result of information from you.

  (1) what is the exact full error message you get when installing the unit?

  (2) have you installed the driver from the manufacturer's website?

  (3) your computer is capable of detecting other connected USB devices?

  You might face this question when the driver installed is not original or if it is not installed correctly. Follow the troubleshooting methods listed below to solve the problem.

  Method 1: Install the printer drivers from the link below, then check the issue. Select the appropriate operating system.

  All-in-one printer, Epson Stylus NX420

  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=151211&prodoid=63087959&infoType=downloads&platform=all

  Method 2: Follow the steps in the link below.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link given below for assistance.

  Share a printer

  http://Windows.Microsoft.com/en-in/Windows7/share-a-printer

  Feel free to write us if you are still experiencing a problem. We will help you to come.

• Why Lightroom does not have "save under"?

  Often, when you change a single image, "save under" would be more useful, instead of export, which is much more complex to use you have to change the destination one other things.

  Thank you

  Not sure if I understand what you want to do, but...

  The changes you make in LR are automatically saved in the catalog, and you can close the program, start it again and continue where you left off.

  You can then see your previous changes in the history panel. There is therefore no need (or ability) to save the image.

  If you need an image for a spesific purpose, use of export.

• EtherCAT - OR Scan Engine could not be changed in Active mode, because one or several slave devices does not have operational status

  Hello, I use a Compact Rio 9074 with an EtherCAT NI 9144 chassis extension

  I am able to see both devices 9074 and 9144 Labview project, but when I try to deploy configuration 9074 controller tracking error is displayed:

  

  I tried deployment while defining the Configuration Mode and Active Mode. Also, when I check on the status of master Ethercat online its State in: pre-operational with errors. And appers this message: error-2147137769 occurred at an unidentified place

  

  I'm using Labview 2011 and the OR cRio has installed:

  

  I tried formatting cRio and reinstall NI Ethercat and scanner again

  I wonder if anyone has the same problem, I'd appreciate any help.

  Thanks in advance

  Thank you very much, DirkW worked for me immediately

• Why Apple does not have a backup battery for Apple devices?

  Why Apple does not have a backup battery for Apple device? Recommended us that of our full when we are on the road, so they should do a backup battery for their devices instead of other companies do. The backup battery that I use for my iPhone 5 c don't let my phone screen timeout as he does when I'm with the regular wall charger. Can anyone help?

  Consult the manual for your backup battery.  There should be a switch or a button to activate the phone load.  It should not be left in charge mode all the time because the phone thinks it has unlimited power when charging, so disabled several energy-saving features (like display sleep, closing a connection Wi - Fi when he sleeps).

• After hybernation, all usb and wifi mobile devices does not work

  Original title: Hybernation question
  After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.

  Hi Mirza.Shanawazbaig,

  1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?

  2. do you have security software installed on the computer?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

  Method 2

  I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• My DVD will play. My DVD says disc is bad or needs to be formatted when I try to burn. Backup stops and says back up does not have all the

  I want to backup my computer to an external hard drive but the popup of backup does not have this option.

  Hi Janice,.

  (a) have you tried using different DVD to burn backup files and check if it burns?

  (b) your use of any third-party burning software on the computer?

  (c) what is the size of the backup files that you try to burn on DVD?

  (d) you are able to burn CD/DVD in Windows Explorer?

  (e) you are able to perform the backup to internal hard drive? You cannot save to the C: drive, try to perform the backup on a different partition and check.

  Try to uninstall the burning of third-party of the computer software and check. Also try using different DVD to back up files. I suggest you follow these methods and see if it helps:

  Method 1: run this Microsoft fixit tool:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2:

  Navigate to the following location and delete all the files and then try to burn the DVD and check if it helps:

  C:\Users\(User Name) \AppData\Local\Microsoft\Windows\Burn\Temporary file Burn

  You can see this Microsoft article and check if it helps:

  http://Windows.Microsoft.com/en-in/Windows-Vista/change-where-you-back-up-your-files

  http://Windows.Microsoft.com/en-in/Windows-Vista/back-up-and-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-in/Windows-Vista/which-CD-or-DVD-format-should-i-use

  Hope this helps, if you need help on Windows or the problem persists, please let us know we will be happy to help you.

• My DVD player does not work and all the information I can find is "this device does not work correctly.

  Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

  I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

  I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Wireless devices shows the MAC address for 1 device that does not have an IP address

  I am tracking down each device connected to my router nighthawk and I identified everyone except this. There is a device of Wirelsss appears when I connect to the router that does NOT have an IP address but it has a MAC address. An interesting point is that the router device itself has a number of MAC that is not anywhere in the list of devices. Any ideas what this could be? I have an Extneder range wireless attached Nighthawk also but I already idenfified his IP address and Mac address.

  How a device could have a mac address, but not IP address?

  Why the address of the router device do not show in the list of anywhere?

  Try to turn off the Extender and see if that will fill again.

• Bought a second hand iphone 5 and my seller did not remove device to find my iphone and im too poor to buy a fresh iphone and my country does not have a retail store, so how do I get it removed icloud? Its imei is *.

  Bought a second hand iphone 5 and my seller did not remove device to find my iphone and im too poor to buy a fresh iphone and my country does not have a retail store, so how do I get it removed icloud? Its imei is *.

  Nobody here can help, and Apple will not help you to overcome the blocking of activation.  If the seller does not cooperate and remove the unit from their iCloud account, then you will never be able to use this device yourself.

  See disable find my iPhone Activation Lock - Apple Support

• Why the Firefox 4 is not restore all the sessions that were open at the time? Before the update, I've been invited either ("SAVE AND QUIT") or even if she closed UNEXPECTEDLY (crushed), he AGAIN restored. New version does not offer "save and exit".

  Question
  Why don't Firefox4 restore any sessions that were open at the time? Before the update, I've been invited either ('SAVE AND QUIT'), or even if it closed UNEXPECTEDLY (crash etc) it STILL restored everything. New version does not offer "save and exit".

  Now, Firefox always stores the old session which you can access from the history menu by selecting "restore previous Session."

  If you always open the last set of tabs, another approach is the following:

  1. Click on the orange button Firefox, then select options to open the options window
  2. Go to the general Panel
  3. Change the setting "When Firefox starts" to "show my windows and tabs from last time '.

• Buttons to blend into the background. Button menu to open does not have a menu.

  Button, button "home" to move forward, back, bookmark this page button, show your bookmarks and open menu buttons are present, but you can not see them. Button menu to open does not have a menu drop-down.

  . Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

  Please report back to see if this helped you!

  Thank you.

• Connect a wireless printer anywhere, wired derivation convert, does not have radio, add WPA2 security.

  Update- good because when the wireless radio failed to convert a wired Ethernet printer to wireless technology, or if you want your printer to support greater security WPA2 wireless.

  Updated - connect to a hotel/motel/school dormitory may not work if the network uses Enterprise authentication requesting a user name and password on your computer.

  This article will try to explain how to connect your wireless devices, including printers, to a wireless network when you are away from home.  The problem when you're in a hotel, motel, room student or other areas is your computer connects fine, but your wireless printer, you have brought with you, has connection/security problems.  Other people/wireless devices can find the printer on an open network, connect you to the printer and start printing without reason just because 'they can do. "

  You'll need is a small wireless travel router.  TP-LINK TL-WR702N Wireless N Nano router or other router of trip is all you need.  The WR702N is available on eBay or Amazon for only $21.00, that's right, only $ 21.

  This device does not support the authentication of company systems because it cannot meet any username and password prompts these system as your computer can.  However, it will connect to a standard WPA SSID and your computer, but if you receive a browser for other questions page redirect, it won't work.

  It's a small powerful travel router which built in 5 modes of operation (more than your home router can do):

  1. AP mode
  2. Client mode
  3. Repeater mode
  4. Router mode
  5. Bridge mode

  The TP-WR702N information is found here:

  http://www.TP-link.com/en/products/details/?model=TL-WR702N#over

  To see the overview of applications see here first to understand:

  http://www.TP-link.com/en/products/details/?model=TL-WR702N#app

  I won't go into the details on how to configure these modes in the TP Link router Nano as the manual does a great job.  One thing you must remember is that you must assign a static IP address on your wired Ethernet connection of computers to access the Web interface internal of the Nano.  The Nano is configured with an Ethernet cable at any time.  It's security that the router that has DHCP disabled so if you connect to a network, you won't crash it with an IP address conflict.  The Nano is powered by a USB cable and comes with a USB AC adapter too.

  The IP address of the Nano is default 192.168.0.254.  Set your computers Ethernet Port, adapter not wireless, a static IP 192.168.0.1, 255.255.255.0 DNS address.  You have to find a way to do it yourself, but it is explained in the manual and on the web for the operating system of your computer.

  This leaves your wired Ethernet connection to a static IP address and your adapter wireless DHCP.  Don't forget to put your wired to DHCP if you need to use it later for a wired connection.  Connect the Ethernet cable from your computer to the router Nano.

  Set up your browser by going to 192.168.0.254 (Nano IP address) in the address bar and you'll get the username and password login screen.  The default username and password is admin/admin, you can change it if necessary.

  Set the Nano bridged mode:

  Other modes will be mentioned later but for now; Bridge mode will serve as this isolates and creates your own SSID private the hotel/motel/dorm room open wireless network SSID.  In Bridge Mode you entrance and connect to the Rangoon SSID (paraphrasing) AND set up your own small network with your own SSID and password.  Your SSID will be separated and protected through WPA2-AES security that you set up.   You will be able to go online normally fine, but all of your devices will now connect to your private SSID.

  Example:

  Hotel SSID: HILTON Hotel Paraphrase and password: GUEST

  Nano SSID: MYNETWORK Nano Paraphrase/password: HP5514

  With this information, the rest is easy.  You set your SSID private and password first, they you must find and connect to the SSID and password hotels.  Simply click on the SURVEY button and a list of all available networks will be displayed along with their MAC addresses.  Find the network SSID, you want to connect (bridge) too and click on "connect".  Information is entered automatically.  I suggest that you also edit your channel wireless on a fixed channel as the 1, 6 or 11, never 'auto '.

  Save your settings and you will be told to restart the router.  Follow the instructions and always restart the router after any changes take effect.  This Nano restarts in 20 seconds approximately.

  Now on your computer when you scan available networks, you will see MYNETWORK.  Connect your computer to the SSID and enter your HP5514 password and you're on!  Start surfing or something else.

  Now, what about your printer?  The printer must be set to DHCP and assuming that you have a printer wireless with front panel:

  1. Go to (Assistant) wireless configuration screen.
  2. Search for available networks.
  3. Select: MYNETWORK
  4. Enter your password: HP5514
  5. To connect!

  In about 15 seconds, you're connected!   Oh, guess what?  The Nano has a WAN/LAN port and in Bridge mode, it is a LAN port that is connected to your network too!  Then plug into a printer/computer Ethernet cable, if you wish.

  Your printer will work as usual with no change at all.  I set up in my house to test and it connected perfectly to my HP5514 wireless printer.  All the tools, diagnostics, printer functions, alerts of ink were normal.

  You're done!

  The bottom can be used anywhere to create a local private network so that you and others can use your printer.

  Now, what about the changes?  If at home, you can use the Nano in Repeater mode to connect to your own network and extend the reach of all devices.  Even as the Bridge mode, but you're on your network using your SSID and the word normal, so everyone can use the printer.

  Don't worry what you heard with speed of execution of a router in Repeater Mode.  Most routers House when running in wireless Repeater mode should be set to no encryption or WEP only.  Here max speed is 54 Mbps.  This Nano turns at full speed of 150 Mbps in these modes, using the highest security WPA2-AES (personal).

  Remember that the size is small, so it's good to perhaps more than 50 feet.  HD video streaming was impeccable and surf watch video at the same time was perfect.

  I hope this help you when business or vacation.  Some hotels charge for EACH device connection.  With the implementation above, it takes only a charge for multiple devices, such as cell phones, iPads, light fires, computers or anything else you want to connect.

  EDIT - do not forget that this Nano device has an Ethernet connection that once configured, you can use to connect a wired computer or wired Ethernet printer.  It is a good radio your printer wireless doesn't have to convert a wired Ethernet wireless printer or if you want your printer to support greater security WPA2 wireless.

  Have fun!

  Read here on how to connect your printer to a network asking for additional security and information (username and password).

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/how-to-connect-your-wireless-printer-to-a-network-requesting/TD-p/4468642

  Most likely, you won't be able to connect.