Device driver in Linux and ready to compile application user for USB-6009

Similar Questions

• Error message: the device driver not available and impossible to send files from windows 7 Ultimate x 64 for Sony Xperia phone.

  Hello

  I'm unable to send the file with my laptop running windows 7 Ultimate x 64 on my phone (sony xperia with android os p)

  I can send the file to my phone to laptop and my laptop to another device and any other device for laptop .when I have associated my phone to laptop, I get notification this device driver is not available. my windows is updated and I installed the version lastes my bluetooth of the BT and my laptop even factory plant i tride to update my BT driver automatically from the internet but it doesn't work and I still have this problem please help me how can I solve this problem thank

  Hello

  This error can occur if you do not have an installed device driver or if you have an obsolete device for your Bluetooth device driver

  We can refer to the article and check if it helps.

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Try to re - connect the phone and try to install PC companion Sony support and check if it helps.

  PC Companion

  Hope the helps of information.

• Simulate signals wired to the DAQ assistant for USB-6009 device

  Hello

  I'm trying to send a signal to the DAQ Assistant Express VI.  I watched the movie "Generating a Signal" on the Web site of NOR (www.ni.com/academic/students/learnlabview/generate.htm) and I have my Signal simulate connected directly on the DAQ Assistant, as shown in this film.  In my case, the DAQ Assistant sends the signal to a device USB-6009.

  However, I received this message:

  Error-200077 occurred to the DAQ Assistant
  Possible reasons:

  Requested value is not supported for this property value. The value of the property may be invalid because it is in conflict with another property.

  Property: SampTimingType
  asked the value: Sample clock
  You select: On-demand

  If I select 'On Demand' in my DAQ assistant and run the vi everything works beautifully.  However, I need my DAQ assistant to be configured to generate a waveform AC continuous, not output a single alternating current rippling.

  What happens here?  I did not have this problem before on other devices of NOR. I am using LABView 2010.

  Please answer.

  Thank you.

  double post

• How to retrieve the id and the password of the user for a Windows service credentials?

  Hello

  Is it possible to recover a user credential and password in which runs a one-stop service

  When I created a one-stop service and set to networkservice / Local user of the Service, later for another service to stop, I want to use this information to identify the user (stop service). How can I retrieve these credentials of the user?

  Give more details... My question, if you go to control Panel\All Control Panel Items\Administrative Tools\Service \Properties, you get a tab for login

  You can check the user credentials here.

  How can be recover through c# code? (.net)

  Hi Nandakumarpb,

  Thanks for posting the request in the Microsoft Community.

  I understand from the description of the issue, you want to know about the recovery of the username and passowrd through c# .net Windows service.

  It is better suited for the IT audience Pro on MSDN. Please ask your question in the MSDN Support Forum. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/categories
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• Windows 7 - my audio device driver is cut off and I can't open the sound

  Original title: the audio adapter driver is cut and will allow me to increase sound-windows 7

  Windows 7 - my audio device driver is cut and can't do his inc. When I hit the sound - I have no scale. just a pop for troubleshooting - can help you?

  Hello

  1. What is the number of brand and model of the computer?

  2. can you play audio files on the computer?

  Follow these methods.

  Method 1

  Open the Audio playback troubleshooting utility-

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2

  Refer to the article for help if you have no sound in Windows:

  No sound in Windows.
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Also check out the link:

  Tips for solving common audio problems:
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Let us know the status of the issue.

• Driver audio IDT and Application + camera

  Hello

  I recently bought a HP Elitebook 840 G1

  Product number: H5g26ea #abb

  Serial number: [redacted]

  OS: Windows 7 Professional 64-bit.

  It worked perfectly until I installed a dual boot (Ubuntu and Windows 7).

  I redefined the partitions, Win7 installed and everything works allright, with the exception of the audio drivers and camera (which includes the microphone, so I have basically no Skype as well).

  I looked in the forums and tried the usual stuff:

  1. update the bios to the release version (prior to this, if the driver is uninstalled, Windows woudn't simply see hardware in Device Manager).

  2 download the latest version of the driver from the driver (SP 65631) page.

  3 were manually in the device driver update manager and specifically pointing to the location of the hard drive of the driver - didn't work.

  4. rebooted and lounched the SP 65631 file setup.exe - did not work.

  SO, I essentially three major problems: a - audio; B - video camera; C - drivers for linux?

  Error messages a. on AUDIO:

  1. in the resolution of the audio problems, the error message is: High Definition Audio Driver has a driver problem - not fiexd.

  2. in Device Manager: this device cannot start. (Code 10);

  3. in the launch of SP 65631 setup.exe: the hardware found is not supported by this package IDT. The instalation is abandoned.

  I also tried:

  -update the driver of HP SoftPaq Download Manager;

  -update the driver from the installation CD with drivers that came with the laptop.

  None of them worked

  B. the camera is not displayed in Device Manager. In the camera driver, there is a lot of files setup.exe, I don't know who to launch...

  C. more than drivers for linux - any chance? If the sound does not work under windows, how could it works under Ubuntu?... it's just a matter of rhetoric I don't use Linux for multimedia, if is not bad worm to me that sound, camera, HP etc buttons don't work... but I have all of the features available in Linux as well .

  I solved the audio with reinstalling the chipset and erasing the bios - the procedure described here (but with the drivers for my machine, of course...):

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/no-sound-from-my-laptop-speaker-but-headphone-works/TD-p/2990137

  I did the same thing and now I have sound

  B and C remain unsolved...

  An unknown device appears in Device Manager. I guess that's the web camera, since details / hardware ID, it is mentioned:

  USB\VID_138A & PID_003.

  The only other device works do not (that I'm aware of...) is the fingerprint reader.

  BTW: this is what appeared on reboot (before Setup manually the audio driver... )

• Home WINDOWS 7 premium (32B) for NOKIA N97mini Bluetooth device driver

  I m using hp pavilion dv3 with WINDOWS 7 home premium, I m unable to pair my NOKIA N97 mini via bluetooth.

  whenever it shows a n says error not found Bluetooth device driver. In total, four of these drivers are missing.

  Can you please help me, where to find these drivers

  Hello, NGO,

  I suggest you to follow the steps and check if it helps.

  Remove and then reinstall the device:

  a. click theStart button, select Control Panel, clickhardware and soundand then click Bluetooth devices.

  b. Select the device that is not working, and then clickRemove.

  c. click Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the boxmy device is set up and ready to be found and then clickNext.

  d. If the apparatus does not, repeat the previous step. When the device is found, select it, and then clickNext.

  e. follow the remaining instructions in the wizard.

  · Make sure that the device is on and that the batteries should be replaced.

  · Make sure that the Bluetooth adapter for your computer is attached and turned on, and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.

  · Make sure that you have installed the device using the appropriate program. If this isn't the case, reinstall the device.

  For problems related to Bluetooth devices, see

  The problems with Bluetooth devices

• Satellite L300: CDDCDW TSSTcorp TS-L633A device driver failed

  I am using a Satellite L300 laptop PC series with a TS-L633A TSSTcorp CDDCDW CD/DVD drive, however the player currently has stopped working, saying that:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  I tried to uninstall the drive and restart the computer, but when the laptop tries to reinstall the driver I got error message saying:

  "Software device driver has been properly installed.

  Any ideas for how to get the operational drive again?

  Hello

  I think that this can be resolved very easily.
  There are some discussions that offer a solution;

  Usually, you will need to remove the device in Device Manager.
  Then you must go to the registry and must remove the upper and lower registry key filters.
  Here you can get more details:
  http://support.Microsoft.com/kb/270008/en-us

  After that, restart the device.

• Windows XP "Apple Mobile Device Driver not installed not" device need driver mobile HELP running XP service pack 3 using an iphone 4

  Problems with the iphone 4 who it says in itunes that "Apple Mobile Device Driver not found" and nothing happens when it is connected to the USB port on charge even not. Running Windows XP 32-bit with Service Pack 3. but think I deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers. Apple went through just fine and everything is OK it is a problem of PC and XP. Microsoft help put me on this site because need to know how to solve this problem I hope that somewhere there are mobile device drivers that work with the iphone? Site Internet de Microsft has 5 mobile device for Windows 7 drivers, but not for XP. Need help!

  Apple went through just fine and everything is OK it is a problem of PC and XP.

  Evasive classic.  It's always the problem of the other guy.

  And the classic response of some evil-educated person "technical support":

  Microsoft help put me on this site

  If the error message says 'Mobile Apple Device not found Driver' then it's an Apple problem, pure and simple.  The device driver mobile for the iPhone comes from Apple, not Microsoft.

  Do you remember what you were doing when you "deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers?"

  Probably not... and you have not explained what has been included in "Apple went through everything."  It is time to start over by removing everything related to Apple and then put it back correctly.

  First, however, the fact that the iPhone does not load even when connected to a USB port is a bit worrying.  Works in everything else in this USB port (for example, a USB flash drive)?

  Have you tried all the USB ports on your computer?  Take a look in the Device Manager (start > run > devmgmt.msc > OK) and see if there are any icons showing warning.  If so, double-click on the entry and information "device status".

  Take a look at the event viewer (start > run > eventvwr > OK).  There is no need to go far.  Connect your iPhone, then look at the newspapers (System and Application) for since a few minutes see if there are any errors or warnings.  If so, double-click on it to get the event properties window, and then click the "Copy" icon (just below of the)

  Have you tried to recharge the iPhone using the adapter connected to Apple's USB cable?  Does it work?

  Have you tried to connect the iPhone to another computer?  With what results?

  Assuming that the hardware (iPhone, USB cable, and USB ports on your computer) is not working properly, see the following topics.

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.

  Warning: uninstall utility for cleaning Windows mentioned in the instructions below has been removed from Microsoft download servers because sometimes it seems more removed he was supposed to (I think that this phenomenon was linked to the bureau uninstalls).  You can still get utility Windows Installer Cleanup--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html here is a free alternative Revo Uninstaller. Before using these cleaning products, you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  Go to control panel > Add/Remove programs
  Remove these applications:
  1 Apple Software Update
  2. Apple Mobile Device Support
  3 Hello
  4 iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)
  5 iTunes
  6 QuickTime

  Open my computer > C: > Program Files
  Delete this files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  Download & install the Windows Installer Cleanup utility: [see note above regarding cleanup utility]
  http://support.Microsoft.com/kb/290301/
  Launch the utility: start > programs > Windows Installer Clean Up
  Select one of the applications mentioned above and click on remove

  Restart the computer
  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

• ISATAP device driver needs to re - install

  Microsoft Fix - It reports that this device driver is corrupted and needs to re - install, but cannot do so. Search the Internet by using the device manager driver update gives me a message that Windows has determined that the best driver is already installed. I don't want to remove the driver until I know how to find a new copy - so if anyone knows?

  Hi Derek,.

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  3. What is the brand and model of the computer?

  I suggest to refer to article and check if you are faced with the same question:

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  http://support.Microsoft.com/kb/932520

  Let us know if it helps.

  Thank you.

• Hi__I have acer extansa laptop 5635. I installed Windows 7 in there. I am facing problem on bluetooth device drivers. How do I get the bluetooth device driver.

  every time I help out to fix this problem, it search for it and then he said: this bluetooth device driver is not installed. Install the last jerking for the device.

  After that, I click option

  apply this hotfix

  then he begins to search for, but after a few seconds it gives an error that

  device not found driver.

  Please help me solve this problem. I will be thankful to you.

  Hi Fadi,

  If Windows is unable to install the drivers automatically, then you will need to visit the Bluetooth device manufacturer site download and install the drivers manually.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Looking for drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• software device driver has not been installed successfully. Digital Still Camera Canon S3IS

  Hello

  Until recently, I was able to connect my canon S3IS to my PC and the device would be recognized and transfer my photos.

  End of week it last stopped. Vista sees the connection, try to install the drivers and fails to this statement: software device driver has not been installed successfully. Click here for more details. The status of details consult the manufacturer of your device to help get this device installed. Digital camera failed.

  I downloaded all corresponding updates of the Canon for Vista 32 bits website. I tried to plug in the camera to other USB ports. When I plug in the camera to the laptop of my wife (Vista 32) the camera picture is recognized and photos are available. I also took the SD card and used a card through a USB Reader and it recognizes the card reader, it wants to format the SD card, which means that he would remove the photos?

  I have all the current updates Microsoft Vista.

  Any suggestions?

  Thank you.

  Hi richardo79,

  Thank you for your message.

  Here's an article that explains the removal and installation of the drivers.

  I suggest using "manually update drivers" section of this article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Problems with USB devices?

  Were new programs or hardware installed near this time?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Linux and win8.1

  Hello

  I have money on the install linux mint but it does not work

  I have pb with win 8.1

  Looking for-du-peace, welcome to the forum.

  When a help request, you must always include the brand / model of the computer or the monitor. This information is necessary for us to review the specifications for them.

  I ran Ubuntu Linux and Windows as a dual boot for years.  I usually use a separate hard drive for Linux.  In this way there is no conflict with Windows.  In addition, it gives you a backup if one of the disks fails.

  Here is a link to the Linux Mint Forums.  These people are those who know how to work with it.  I suggest asking for help here.

  Please click on "BRAVO Star" if I helped you and click on "Accept as Solution" If your problem is resolved.

• "software device driver has been properly installed.

  I have a problem connecting my printer hp deskjet 1000 to my laptop (vista). A message appears to say something as the software device driver has not been installed successfully?

  Thanks for your time.

  Try to delete the file INFCACHE.1:

  Windows Vista / USB device detection issues
  http://www.thedave.ca/geek/Windows-Vista-USB-device-detection-problems/

  Also check your cable if its not working properly.

  HP support & divers
  http://WWW8.HP.com/us/en/support-drivers.html

• Device USB-6009, not found problem

  Hi all

  So my VI and USB-6009 worked fine until recently.  I noticed the VI was read or graphing correctly the analog input channel information.  My firmware is up to date, but I noticed a problem.  In Isdaq, he will recognize the USB-6009 case is connected, then when I start my VI and to stop it, I double check Isdaq for my device and it doesn't recognize any device.  I have to unplug the daq and reconnect to Isdaq to recognize the usb-6009 case again.  But whenever I start my VI, it does not collect all the data and makes the unrecognizable device.  Do you know what could be the problem?  Is attached the VI I ran in case you want to watch.  Its working fine so far.

  BTW, I'm under Labview on Mac OS X

  Thanks for the help!

  Hello Solis,

  I recommend you to make changes to the parallel tasks to use the cluster of the error to force the order of execution, given that NEITHER-DAQmx Base is not multi-thread safe (review NOR-DAQmx Readme). Please check if this alleviates the problem.

  Best regards

  M Ali

  Technical sales engineer

  National Instruments

  www.NI.com/support