device driver was not installed optiarc DVD RW AD 7581 ATA device
Graduated fron windows vista home premiun, Ultimate and optiarc dvd rw ad-7581 ata device will not work. How can I fix it?
Hello
Check with the Maker system and/or the manufacturer support and Forums real player
(if any). There is no reason for the reader who has worked on Vista HP does not play
on Vista Ultimate.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
Software device driver was not installed
I can't connect my digital camera to my computer. He tells me that the software device driver has not been installed successfully. I called my manufacturer and they told me it was my computer and Vista software. I can connect my camera on other computers that have XP. Can someone help me?
Thank you!
Hi tarheelfanatic,
Please see the link below to the Canon site. Don't forget to download and install any necessary software/firmware and try to connect to your camera again:
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
My CD drive disappeared. I ran the Microsoft Fix It tool, and he said he solved the problem, but he also says that the software device driver has not been installed successfully.
The Fix - It tool tried to download the device driver, but it says that it failed. Is there anyway that I can get this device driver that I am able to use my CD-Rom drive again?
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html------------------------------------------------------
After the foregoing:
Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
solves the problem.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
that the troubleshooter does not, and those who "could" be the cause.Check with your system manufacturer Maker and device for possible firmware updates and the good
Your player registry entries.Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
a person with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
ATI radeon 7000 driver was not installed correctlly
Hello guys I don't have where to put my question but, I was using NV-Geforce4 MX440 and it stop working, I replaced it with ati radeon 7000 it works with the previous driver of the NV but when I tried to set up its own pilot of reject windows with the message says "cannot find the components that you can install in your current hardware or your installation software. , what I can do, I know that I'm just asking before the new year, happy new year for you all guys
Hello
Did you first uninstall the drivers NV-Geforce4 MX440 before installing drivers Radeon 7000.
Then I go here and download the last your card reader... He hoped that all the work for you...
http://support.AMD.com/us/gpudownload/pages/index.aspx
Concerning
GT4U
-
Was not installing the drivers in my laptop self help what I can do... ?
1. product name and number: A7K05UT
2. installed OS: Windows xp
3. error message: driver was not installed properly.
DJanoon1: HDAUDIO\FUNC_01 & VEN_8086 & DEV_2805 & SUBSYS_80860101 & REV_1000
HDAUDIO\FUNC_01 & VEN_8086 & DEV_2805 & SUBSYS_808601012: PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30
PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C
PCI\VEN_197B & DEV_2392 & CC_088000
PCI\VEN_197B & DEV_2392 & CC_08803: PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C & REV_30
PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C
PCI\VEN_197B & DEV_2393 & CC_088000
PCI\VEN_197B & DEV_2393 & CC_08804: PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
PCI\VEN_10EC & DEV_8176 & CC_028000
PCI\VEN_10EC & DEV_8176 & CC_02805: PCI VEN_8086 & DEV_1C3A & SUBSYS_167C103C & REV_04
PCI\VEN_8086 & DEV_1C3A & SUBSYS_167C103C
PCI\VEN_8086 & DEV_1C3A & CC_078000
PCI\VEN_8086 & DEV_1C3A & CC_07806: PCI\VEN_1033 & DEV_0194 & SUBSYS_167D103C & REV_04
PCI\VEN_1033 & DEV_0194 & SUBSYS_167D103C
PCI\VEN_1033 & DEV_0194 & CC_0C0330
PCI\VEN_1033 & DEV_0194 & CC_0C037: ACPI\HPQ0004
* HPQ00048: PCI VEN_8086 & DEV_0116 & SUBSYS_167C103C & REV_09
PCI\VEN_8086 & DEV_0116 & SUBSYS_167C103C
PCI\VEN_8086 & DEV_0116 & CC_030000
PCI\VEN_8086 & DEV_0116 & CC_0300 -
device driver software was not installed with success-vista
I have a hp vista computer and recently, I had the computer have a weird blue screen when he started upward. The blue screen would not go away, and then once it has started to do a windows update automatically. Since this update my drivers usb and cd/dvd player will not work. I tried to uninstall them and restart the computer and on any other thing, I have seen online about this. When I plug something into the port, it shows that something is there, but the window that will normally pop up does not work. Can anyone help me please with this problem?
Hello
Try to follow this link.
A device driver is not installed or a hardware device does not work correctly after you install a Service Pack for Windows Vista
http://support.Microsoft.com/kb/948187
Refer.
Install a USB device: http://windows.microsoft.com/en-us/windows-vista/Install-a-USB-device
I hope this helps.
-
(cd ide) not installed in my bios boot
I can't reinstall clean my version of vista because my cd/dvd drive is not installed in my bios boot priority please can you help solve this problem
You added a new drive?
All the drivers are up to date?
Check the cables for loose connections.
Is it possible for you to do the following to reload the original Windows installation files?
Start > all programs
Select Samsung
Samsung Recovery Solution
Select "full restoration".
-or-
Restart Windows and the Samsung logo starts pressing F4 to access the recovery screen
This is a known problem in Samsung - see document - links products are not good
It is Support Center of Samsung - Re: HDD no detect does not issue
Click Troubleshoot utility (PS there is a pop up window)
http://www.Samsung.com/global/business/HDD/
Samsung also recommend OnTrack Disk Diagnostic. You can make a bootable floppy to advise data with this:
http://buyonline.Ontrack.com/ecom/fr...file=DC500.exe
And here is the other programs from Samsung. The creator of the Manager of disc is really of Ontrack and hosted by Samsung. It should work with any brand of hard drive.
http://www.Samsung.com/Products/Hard...file/Sutil.exe
http://www.Samsung.com/Products/Hard...Ile/SHDIAG.exe
http://www.Samsung.com/Products/Hard...il_creator.exe
http://www.Samsung.com/products/hard...DM_Creator.zip(Disk Manager link was not on the Samsung website with the exception of one who asked for the story of your life, but in trying different possibilities with links leading to other files, I finally found one that allowed a download without having to give everything and personal information.)
___Taken from the following thread - Elvandil response
-
USB device not recognized / 43/pilot error was not installed successfully.
Original title:
Joystick USB problem
My USB Joystick worked great so far (2 days since purchased) but it suddenly stop working.
Computer display error:USB device not recognized / 43/pilot error was not installed successfully.
I tried the Solution as re install disk, unplug the power cords, restart the PC, etc., still does not.
Also another thing is, it does not work in other PC also and
Please help if anyone knows. Thank you.
(Moved from Gaming)
Hello
Refer to the steps in this thread:
-
Optiarc DVD RW AD - 7560A ATA DEVICE cannot read the PC DVD - ROM.
I have sony vaio VGN-NR38S. It has a Optiarc DVD RW AD - 7560A ATA DEVICE.
A few days ago I bought a DVD of driving test. I can't use this DVD in my laptop.I tried this DVD in other laptops and it works perfectly, but when I insert in my laptop, it says "Please insert the disk".»could someone help please.Thank you.Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html=======================================
As needed check with the Sony Support, their drivers and documentation online and ask in their forums
on the problems known.Sony - Contacts
http://eSupport.Sony.com/us/Perl/contact-land.plSony - drivers
http://eSupport.Sony.com/Perl/select-System.plSony - Support
http://eSupport.Sony.com/Sony - Forum
https://Forum.sel.Sony.com/?XID=M:Showcase:eSupportI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
How to restore a security entrancecode that was not installed by updating to ios10?
Work with the 5s iphone I recently could update to ios10. I did it during the evening. In the morning, I was told the update required an entrycode that was not installed.
I use an entrycode before this and the same works after that.
No longer is my ability to import on my Imac out of the photo on my iphone, it says in Iphoto: cannot import as device is held by entrancecode, you need to unlock the device to import the photo.
My unlock does not work. I tried to connect to itunes, tried to reset, but so far nothing works.
What can I do?
Hello
Go to settings touch id & password if you can't do this support.apple.com contact
See you soon
Brian
-
3005 pro MT: the coprocessor driver is not installed
Product no.: VS638ut #ABA
[Personal information]
Error "the coprocessor driver is not installed.
The hardware ID you posted is present in the pilot, so the manual installation should have worked (unless the W7 driver is not compatible with W10).
[NV. NTamd64]
%SMU51Desc%=SMU51_Inst,PCI\VEN_10DE & DEV_03F4
%SMU51Desc%=SMU51_Inst,PCI\VEN_10DE & DEV_07DA
%SMU51Desc%=SMU51_Inst,PCI\VEN_10DE & DEV_0753
%SMU51Desc%=SMU51_Inst,PCI\VEN_10DE & DEV_0AA3
%SMU51Desc%=SMU51_Inst,PCI\VEN_10DE & DEV_0D7AI shot the driver in the compressed file it upwards and attached it below.
Download and uncompress the file in its folder. Don't do anything with the files in the folder.
Go to Device Manager and click on the device of coprocessor requiring the driver.
Click the driver tab. Click on set to update driver.
Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.
Make sure that the include subfolders is selected and see if the pilot goes like this.
Restart the PC.
-
network controller driver is not installed
My HP n6220 wifi does not work,
my wireless assistant says that it is disabled in Device Manager, when you check the device displays Manager this network controller driver is not installed
My equipment is:
PCI\VEN_8086 & DEV_4220 & SUBSYS_12F6103C & REV_05
PCI\VEN_8086 & DEV_4220 & SUBSYS_12F6103C
PCI\VEN_8086 & DEV_4220 & CC_028000
PCI\VEN_8086 & DEV_4220 & CC_0280
Concerning
Hello:
You need the wireless driver Intel support for your laptop and driver page...
-
Network driver is not installed and have no option for the wireless
Hello
My network driver is not installed and I have not listed in my device manager wireless driver. For this reason, I am unable to connect to the internet.
I've seen previous posts that you need network controller ID for this problem, they are:
PCI\VEN_168C & DEV_0036 & SUBSYS_18E3103C & REV_01
PCI\VEN_168C & DEV_0036 & SUBSYS_18E3103C
PCI\VEN_168C & DEV_0036 & CC_028000
PCI\VEN_168C & DEV_0036 & CC_0280
Excuse my lack of knowledge in this area, but how to download new drivers if I can't get an internet connection.
Appreciate your help.
Best regards and thanks,
Jeff.
Hello
Please try:
http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63802.exe
You also have the following for Bluetooth:
http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64678.exe
Kind regards.
-
My HP Pavilion dv6-6c13nr Wireless Driver is not installed
As said, the model number of my cell phone is dv6-6c13nr. Windows 7 my laptop was FUBAR to a computer virus that my sister managed to get on it somehow. I said to hell with it and just DBANed all of the hard disk and install a clean Windows 7 did. Everything was fine except the wireless driver adapter could install.
I tried the Broadcom Wireless LAN Driver and the Ralink 802.11 b/g/n WiFi Adapter linked to the page of the driver of my PC model. On two of them, whenever I click on the downloaded file, nothing happens after having unpacked the file, no installer doesn't run. I tried to run regularly and running as long as administrator, I also tried to run the installation programs directly from where they were first decompress the C drive, on a regular basis and as an administrator.
All other software on the driver of my PC model page and drivers installed just fine except the wireless, it's the only thing and the most important thing, that I can't seem to get on with the job. Windows 7 comes with the PC version was Windows 7 Home Premium, the version I have and that I have installed Windows 7 Ultimate. Not ultimate compatible drivers?
I also held account install earlier versions of the drivers, but I can't find anywhere legacy versions that don't look like not fragmentary. I would really appreciate help with this.
Hello:
Please see my response to your other post on the link below...
-
Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install in Windows 7
I use Windows 7 update.
Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install. He says 1 optional update is available almost every day, then when I try to install, it does not install and it says that the update is not necessary. Even once when I check updates, it says 1 optional update for the printer is available from Microsoft. And the story continues. I tried to reinstall the optional update, but the same problem persists perenniellyIs this the driver you are looking for?
http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=503519&prodTypeId=18972&prodSeriesId=503548&swLang=8&TaskID=135&swEnvOID=4062Looking for HP for the pilot because it is better to get these live drivers from the manufacturer. TaurArian [MVP] 2005-2010 - Update Services
No, these aren't the droids, uh, I mean the drivers he was looking for.
In fact, it's better to get the new drivers from the HP website, you will notice the link you provided that the options only are available for this printer under Windows 7 drivers universal. I regularly have problems with universal drivers and strongly recommend to avoid as much as possible.
I agree with the question of the original poster, which, after more than two years, remains unanswered by Microsoft. It seems that MS has a driver PCL 5 (not universal) updated specific 3015, but it fails to install the Windows Update control panel. I finally gave up on it, right click on the update and selected the option to hide it from view.
Why bother with a solution when I use the button "Sweep-It-under-the-carpet" practice of Microsoft?
Maybe you are looking for
-
Rocket conversion problem! Help!
I was very happy to buy a 8 GB Sansa Fuze, especially for watching videos! then I found out what a major concern (apparently), is to convert videos for use! Arrgh! I have several AVI and OGV videos I want to convert and display on my rocket. Th
-
system displays 2 messages saying 2 large installations cannot be updated. Tried to install and run them as an administrator and do not work. He does not think I open word, Excel, pdf document or file. Get the following message... Windows cannot find
-
Random BIOS style beep while under windows. Help please!
Hello, I have a laptop Dell precision M6800 that randomly makes one style of short BIOS beep then in windows 8.1 during normal operation does not when starting. The sound system is disabled so the beep is not windows. The beep occurs also through the
-
Download/enable iTunes to burn audio cd.
Recently the iTunes software to use for burning CDs of audio recordings of LP records. System stops the process with the error code 2 using win7. I deleted iTunes and re downloaded and still have the same problem. How can I solve this problem? sarg
-
Very bad audio and video performance
I have a Pavilion dm1 laptop running Windows 7. When I got all first the machine audio and video performance was very good. However, towards the end of last year the performance for audio and video has become extremely slow. Still, the sound stutt