Device for unlocked Motorola Device Manager

I have a unlocked SIM Motox AT & T that I use on T-Mobile, when I update the software of the device with Motorola, Device Manager it tells based me device software is updated, but it also refers to a software for AT & T device.

Locked myself in the updates only when AT & T releases or can participate as the other T-Mobile users?

The software still a ATT phone. It's only the unlocked SIM. In this case, you will have to wait the ATT software to be updated before the update, you'll see. I hope this helps.

Tags: Motorola Phones

Similar Questions

  • Invalid certificate Motorola Device Manager (MDM)

    I'm a software developer. We develop mobile applications for iOS and Android devices. A single device that allows us to develop and test is a Droid 4. Thus, we have installed Motorola Device Manager (MDM).

    Recently, I tried to install an update of MDM.

    I received an error message:

    MDM Installer.pkg has been signed with a certificate that is not valid. This package can not install what you expect. Do you want to continue the installation?

    The certificate expired on Wednesday, July 3.

    Should proceed - or will assign you another update with a valid certificate?

    Thank you

    Chuck

  • Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical

    Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...

    I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.

    Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!

    This solved my problems. Good luck with yours.

  • EliteBook 8540p: I have no driver or registration for memory card reader in Device Manager

    There is no registration for my memory card reader in Device Manager. The card reader does not work. SD card works in my other PC. Tried to download the Driver Ricoh Media Card Reader suggested by HP Support, with no results. It's as if there is no such thing as the card reader. Is there a way to shake the player in a localizable device? Or is it dead material?

    Hello:

    If there is that no device Base system not listed in Device Manager in need of drivers, then the unit is completely dead/disconnected from the motherboard.

    I'm not a PC repair in commerce or training technology, and there are no diagrams of the motherboard I know to see how the circuit card reader is attached to the Board of Directors.

    If you look at Chapter 4, pp 93-94's service manual, it seems that you can replace all separately.

  • Driver Pro yoga 3 for ACPI\VPC2004 in Device Manager

    Hi all, first post here...

    I am re - install Windows and drivers needed for my Yoga 3 Pro 8.1 (to get rid of Superfish, started the task until the Lenovo tool came out...)

    I'm close to, with the exception of an unknown device in Device Manager, which has a code on his ACPI\VPC2004.

    A quick google gives me a link - Lenovo http://support.lenovo.com/us/en/documents/ht071645 - a page that says "download and run the energy management of the Lenovo Web site with its own version of the operating system. This will install the chipset INF files so that Windows correctly detects the controller virtual power/ACPI VPC2004. »

    Everything seems clear. However I am not quite clear on what file on the relevant yoga page ( http://support.lenovo.com/gb/en/products/laptops-and-netbooks/yoga-series/yoga-3-pro-1370-laptop-len... ) Should I use? -J' already installed all the drivers on this page (other than the intel LAN wireless and bluetooth as the yoga Broadcomm).

    Any ideas or some direction would be massively appreciated!

    Thank you!

    It seems that the power comes from a key optimizer. Can you install and let me know if the driver installs as well? If this isn't the case, I extract from my installation.

  • Installed OR-DAQmx Base 15.0 for Device Manager (PCI-MIO-16-4 & PCI 6713) Watch always point of exclamation on both cards.

    There are two cards I have installed on this computer. The two cards are PCI-MIO-16-4 & PCI-6713. They all have two cable connecting to each other on top. The current operating system is Windows 7 64-bit with 4 GB of memory.  I went to the drivers OR support and typed in the serial number for these two cards. The two cards came back with the same drivers. That is NEITHER-DAQmx Base 15.0. Installed the driver NOR-DAQmx Base 15.0, but shows Device Manager always the exclamation point on those two cards. So, I tried to search for new hardware and get a message saying cannot install driver. I also tried to restart. Help, please.

    Thank you

    hms168

    Drivers install successfully. Thank you!

  • OfficeJet 7310: Reported Device Manager driver missing for printer Officejet 7310

    I used the full setting install software downloaded from the HP site to set up a printer Officejet 7310 on a Lenovo laptop, T540p with OS 64 - bit Windows 8.1.  Installation and printer seem to work fine since I can print and I can also scan from the HP Solution Center utility.  However, Device Manager reports two errors/anomalies as follows.

    Under the heading 'Multifunction cards' the Officejet 7300 series properties shows the status of the device such as:
    This device is disabled. (Code 22)
    Click Enable device to enable this device.

    To the title of the theOfficejet 7300 series entry 'Other devices' properties shows the status of the device as:
    The drivers for this device are not installed. (Code 28)
    There is no compatible driver for this device.
    To find a driver for this device, click Update driver.

    I find this a little confusing, because I believe that the installation of the software is supposed to include the pilot, as well as the printer seems to function (which could be due to default Microsoft drivers).

    Any thoughts on how things are in this State and how to recover would be deeply appreciated as I prefer not to "ignore" error messages.

    Thank you

    Glenn

    Well, I finally got a moment for all dismantle and reinstall according to the suggested procedure.  The offending Device Manager entry disappears not directly as a result of using the tools Microsoft and CCleaner, but after these steps in the process, I was able to remove the entry from the device.  I suspect that the registry was somehow blocked upward and demelee enough tools stuff for me to delete the entry.

    The relocation went well, but unfortunately, I misread the part about the reference of USB and initially installed with a USB connection.  I had to go back and add the network connection, which was not a problem.  I wonder if I can remove the USB from the printer through devices and printers instance while keeping the Solutions Center HP happy on the network printer instance.

    Thanks again for the detailed procedure.

    Kind regards
    Glenn

  • WALKMAN NWZ-S545 gives error cannot start (error 10) device in the Device Manager (and not driver for this device found)

    Under Xp (sp3), Device Manager gives me an error for a Walkman NWZ-S545.  XP sees it as a MTP device, but it does not start.  The Device Manager will give me 2 error messages: device will not start (code 10) not and no driver not found for this device.  The walkman works very well with my other machines on the LAN XP but naturally one that I run my media (a all my MP3 etc.) is the one that has the error.  All of my PC are almost identical (with the exception of the server, duh).  I changed USB ports, uninstalled/reinstalled drivers, called SONY to dozens of times, nothing works.  Is a service not started that must be, a driver damaged, what?  Thanks for your help in advance.

    Hello

    I suggest you run the fix that is present in the link below then connect the Walkman on the system and see if the problem is resolved.

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

    http://support.Microsoft.com/kb/943104

    I suggest to uninstall the drivers and firmware for the walkman of the system then download it from the Sony site and install it on the system and check if the problem is resolved.

    http://eSupport.Sony.com/us/Perl/SWU-list.pl?MDL=NWZS545&SelectOS=7#div_pos_94

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to fix a sound problem - reading devices no. for the Device Manager on WinXP SP3?

    (1) I can't to Device Manager by following the guide for help on my system.  The steps do not match what is actually showing me my Windows and I can not here the only way I can get to it is to use a link on the help page directly.  Even when I do that, the steps in the help guide still do not match what I see on MY screen.  Is this perhaps an update of this Guide to match my system?

    (2) I need Device Manager to find out what happened on my Audio device.  I have no sound from my speakers.  It happened all of a sudden when my wife was using the computer.  I don't know what she can do both.

    Start/Settings/Control Panel / sounds and Audio Devices Properties shows "No. Audio Device", hence "Volume of the device" is gray.  Audio tab displays 'No peripheral to read '.

    The fastest way to bring up the Device Manager is:
    Start-> Run-> "devmgmt.msc".
    If it detects the sound equipment, but there is a problem with a driver, you will probably see a yellow "!" appears by your audio device.

    If he was working and stopped, you can try to perform a "System Restore" to a point where it worked:

    "How to restore Windows XP to a previous state"
      <>http://support.Microsoft.com/kb/306084 >

    HTH,
    JW

  • OfficeJet 6500 E709n: for 6500 Device Manager

    I just transferred an officejet 6500 portable Mac on my pc Windows XL.

    I noticed on the laptop, an HP device at the bottom of the screen area manager there, but there is not one on the pc or in the system tray or the HP folder.

    The installation not being available disk, I downloaded the software from the HP website.

    How can I get the Device Manager on my computer?

    Thank you

    Hello

    HP Device Manager is the software for Macintosh computers only.

    On the start menu, select programs > HP > HP Officejet 6500 and open the program HP Solution Center, it is one that is available on a Windows PC to your printer.

    Kind regards

    Shlomi

  • Bluescreen when usb2 drive attivated, no error reported upward on Device Manager. Drive works __OK on usb1 ports. Unit worked for 18 months without any problem

    Error code = OX0000050, pilot?

    Hi comsecflyplan,

    · Provide us the full error code with error message.

    · What is the service pack installed?

    Try the methods and check the results below:

    Method 1:

    Run the patch from the link below: hardware devices do not work or are not detected in Windows:http://support.microsoft.com/mats/hardware_device_problems/en-us

    Method 2:

    Remove and reinstall all USB controllers:

    To remove and reinstall all USB controllers, follow these steps:

    a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.

    b. click on the Hardware tab.

    c. click the Device Manager button.

    d. expand Bus USB controllers.

    e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

    f. restart the computer and reinstall the USB controllers.

    g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.

    Link for reference: advanced troubleshooting tips for General USB for Windows XP problems:http://support.microsoft.com/kb/310575

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Empty Device Manager and for error message "cannot create the enumerated device root need to install Parallels paravirtualization pilot".

    Original title: Device Manager empty

    I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.

    Hey Harcjk,

    For your first question, go through this article.

    None of the items appear in the device list manager when you open
    http://support.Microsoft.com/kb/311504

    For the second question, here are some suggestions:

    Method 1: Uninstall & install Parallels tools

     

    NOTE: we highly recommend you make a backup of the virtual machine before you continue.

    a. start your virtual machine and cancel the installation of Parallels Tools Wizard.

    b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.

    c. restart Windows.

    d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.

    Method 2: Uninstall antivirus software

    If the problem persists, try the following:

    Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.

    Note: Don't forget to install the back antivirus software, once the problem is resolved.

     

    Method 3: Uninstall, clean & install Parallels tools

     

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

     

    How to back up and restore the registry in Windows XP

    http://support.Microsoft.com/kb/322756

    a. If the problem persists, try the following:

    b. start Windows.

    c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.

    d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.

    e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.

    f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.

    g. restart Windows.

    h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.

    I hope this helps.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I use a Belkin USB wireless adapter. In Device Manager, I see this same adapter listed several times... with a yellow exclamation mark over it. However, an entry for this card will not have any problems indicated and work well.

    I think that whenever this USB adapter is removed and reinstalled, the system is seen as a new USB device.  However, if I try to uninstall the list in Device Manager showing a yellow exclamation point, the system will not... I get a message saying "Uninstall failed...". This device may be required for the system startup.
    Suggestion?

    Hello Fgibson1911,

    Thank you for your message.  All of these entries stay after you restart your computer?  In addition, what happens when you search for new hardware?  Try this and let us know the result.
    Click 'Start' > right click on 'My computer' > select 'manage '.
    Click on Device Manager.
    Right click on "Network adapters", and select "search the hardware changes.
    The "Yellow!" entries disappear?
    We can't wait to hear back on your part.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Code 31, for my 2 GB USB - stick USB Device Manager,

    Hello world

    I use a HP pavilion a610t, 32, Vista premium edition, 2. 4 g, 3 G of ram, w, 4USB ports. I installed a gang self-powered USB 2.0 w/10 usbs, sometimes it turns on at startup, sometimes not and I re - plug for my system to recognize. I don't see the error messages for the band, but I got an error for 2G USB - stick in the Device Manager: code 31, tried to reinstall a driver or driver update, but it says driver is up to date. the appliance works once it is on. Is that what the problem of the USB - stick or tape USB? Also, at startup I get all my other USB devices including media Pocket Bay K: entry w/PC OEM pop ups asking what I want to do and if I want to scan or to execute without scan, I tried scanning to see and it did nothing, I didn't not lose my media in the device either. I also code 10 for my reader to CD-DVD E: that ejects and turns but does not load the driver so I don't see anything, I tried all the suggestions, reload driver, Plug connections, high-low own filters, re - install the driver, all to nothing does not. Device Manager still shows my drive with a flag and error 10 (driver may not load) are 2 separate issues but I have listed both, because they may be related, I want to understand the thumbdrive, firstly because it is a new problem, and I use my allot USB drives to save all my important files. The problem with the drive, I tried all the suggestions so far, if someone has any ideas to help I would be very grateful
    Thank you all, boulonman/Alan

    Hello

    It doesn't seem to be a model available in HP you specified.
    See the site:
    http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=HP+Pavilion+a610t#n41
    I suggest you to check the model number again.
    The CD/DVD software burning should be uninstalled to uninstall or change a program and not Device Manager.
  • When I open the Device Manager there is no ' sound, video...» "in the menu. What should I do for intal vista audio output device?

    My computer says "no audio output device is installed" when I open the Device Manager there is no 'sound, video game... ". "in the menu. What should I do to get a new installed audio device?

    Stan

    Hello


    1. What is the brand and model of the computer?
    2 did you and changes before the show?
     
    Method 1:
     
    I suggest you open recognition of the device by using Device Manager.

    (a) click Start and type Devmgmt.msc, and then Enter. The Device Manager window opens.
     
    (b) click on your computer as the location for the scan.
     
    (c) on the Action menu, click Scan for hardware changes.
     
    (d) to close the Device Manager window, and then restart the computer.

    Method 2:
    You can try to download and install the latest drivers for the sound from manufacturing sites and check.
    Check out the following link.
    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
     
    Method 3:
    You can see the following link.
    No sound in Windows

     
    For reference:
    It will be useful.

Maybe you are looking for

  • New tab page is completely empty.

    I had to reset my firefox this morning, because something has installed Snap.do, and now whenever I click on the new tab button, it is completely empty. There is no icon ' Show/hide', and there is no pinned sites. It is all white and white. I use the

  • Satellite L300 - need to Win Vista product key

    I have a Satellite L300. OS recently broke down and recovery CD does not work.I got another CD of instalation windows vista but windows at the back of the laptop dispelled the label, and I can't read the code. I can provide the invoice product or inf

  • My motorcycle 2gen died last night :(

    Hi, I want to know if someone can help me with my problem. Last night, my phone was 81% charged and died suddenly, I don't know why. I thought that maybe he needed fresh but then when I connect my phone charger, there then and stopped on the logo Mot

  • Auto update won't install

    I received the automatic update for Windows XP (KB2779562) for the last 4 days (to stop). He tried to install it 10 times and has failed on each attempt. What can I do to not take into account this update and stop trying to install?

  • Extract metadata from jpg? (photograph dates)

    Does anyone know how (or hold a VI) which can extract the metadata of jpeg images?  Specifically, I'm looking for a 'photo date taken' but it would be nice to have other tags as well. Thank you Jeremy