Device ip2600 Puse cartuchos of tinta nuevos has the more y muestra are vacios, el of tinta color no lo quiere music, if como aren't estuviese wont, what hago?
More mi no quiere print aun cuando tiene cartuchos nuevos. What hago?
Hello
Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
http://support.Microsoft.com/common/international.aspx
Tags: Windows
Similar Questions
-
Cisco has the more granular dBm lookup table.
Hello
It is possible to 1310 bridge wireless signal quality monitoring with snmp?
Thanks and greetings
Try CISCO-DOT11-ASSOCIATION - MIB:cDot11ClientSigQuality
It is indexed by ifIndex/SSID/Mac.
In the case where you do not have access to the MIB here are the OID to walk:
1.3.6.1.4.1.9.9.273.1.3.1.1.3 cDot11ClientSignalStrength
1.3.6.1.4.1.9.9.273.1.3.1.1.4 cDot11ClientSigQuality
Example of using Net-SNMP:
cDot11ClientSignalStrength [1] ['SSIDXXXXXXXXX'] [0:11:92:XX:XX:XX] =-59 dBm
cDot11ClientSigQuality [1] ['SSIDXXXXXXXXX'] [0:11:92:XX:XX:XX] = Gauge32: 38 percent
-
How to hide items to the printer inside the muse? / Elementos Como cars has the more Muse
English
Hello guys, there is no possibility to hide items on the site of muse for any impression, I'm working on a catalogue with pront option, but I don't want the navigation menu buttons on my print sheets, an idea?
Spanish
Hola a todos, hay alguna opcion than elementos ser outlets blocked? Estoy trabajando en UN catalogo online, no quiero pero what elementos como los los botones fantastic together. tienen alguna idea?
You need to hide the contents of the page with a custom code, you can try these options:
http://IMAR.spaanjaars.com/240/how-do-i-hide-screen-elements-when-a-page-is-printed
http://StackOverflow.com/questions/4816937/use-CSS-to-hide-contents-on-print
Thank you
Sanjit
-
If anyone has the serial number of my iPhone, my device is compromised?
can my compromised iphone if anyone has the serial number of my devices?
N °
-
I changed my apple ID user name and password on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.
OK, just to clarify: you always use the same Apple ID, but you changed its name, correct?
If this is the case, you can go to iCloud.com or use find my iPhone app (free on the App Store) of one of your devices to remove the 4th icloud.
-
What has the smallest screen resolution? [android devices]
Hello
Does anyone know the smallest screen size that I should prepare? Or maybe a so popular list supported devices, including the ppi and res screen? I know that Adobe has the list of supported devices, I will start looking up/document probobly screen sizes based on this list. I feel like someone is probobly already.
Thank you!
Given Android devices the smallest must be 800 x 480 - as each lower unit is probably not under Froyo. I have at least to consider the 480 x 320 as existing Android devices, but in fact don't optimization.
Of course when you go for iOS, to target the iPhone3, which is 480 x 320.
Here is an approximate Overview: http://help.adobe.com/en_US/air/build/WSfffb011ac560372f-6fa6d7e0128cca93d31-8000.html
And several Android specific resolutions are discussed here: http://developer.android.com/guide/practices/screens_support.html
-
Error, device ata Optiarc dvd rw ad - 7563 has
I just noticed this problem. When I went to download the software for a new printer he wouldn't have anything as much as any screen or formatting. The error is OPTIARC DVD RW AD - 7563 ATA DEVICE A. I tried to fix it in the DEVICE MANAGER but repeat me that it is not properly installed. However when I look in Device Manager it says I have the latest software for it. How can I fix it?
Hello
Try this - Panel - Device Manager - CD/DVD - RIGHT click ON the drive - UNINSTALL - REBOOT
This will refresh the default driver stack.
CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after startup
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Normally the above will solve this problem otherwise working your way down through them, even if you did
them before.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
I hope that these AIDS
Mark <> Microsoft Partner
-
My iPod touch get now and then next alert message due to change on my iPhone.
EMail address added to < < my device name > > < < my device name > > now using < < my mailadress (identical to the Apple ID) > > for FaceTime and iMessage.
Why I get this message? iPhone is disabled due to my work offshore for two weeks, but the use of the iPod touch is allowed.
What is my apple ID used on other devices with the same name as my iPhone?
I would be happy if anyone has an explanation of why I feel this strange behavior.
When you connect to FaceTime or Messages on another device, another peripheral other device using this same ID will get the message that has been signed to. Some iOS (and OSX) update log for other devices will get the message when that happens.
You said "by reason of change on my iPhone"
What has changed on the iPhone?
-
I had to change my Apple ID due to fraudulent charges but my iPhone 6s 9.2 still has the old Apple ID and will not accept old or new passwords. How can I update the iPhone 6s 9.2 with the new Apple ID and password? I tried to perform a complete reset, but which requires the Apple ID and password that doesn't work not... pretty frustrated here.
YYou have unlink the old iphone you as find my iphone the reset all devices on this subject from your account then plug it to your iTunes then restore a new one after that reset password that under the new phone then connect
-
original title: address Ip issues
What should I do or what it means when a warning is displayed on my laptop saying that this computer has the IP as another device?
This means that there is another computer/device on your local network with the same IP as your PC. Try to configure your network adapter to use DHCP, or just give it an IP address different yourself... most LANs are minimal and you shouldn't have a hard time to randomly select another IP.
-
I try to click on the more information of winqual.microsoft.com/support/? 20211126.it driver id always comes up with 404 page not found. I just want to know what the driver is offering or fixing. I have tried everywhere, someone has ideas how to get this info?
The only way I know is to get this information from the manufacturing of the hardware device. In this case go to the Web from Nvidia site and then go to the downloads section. You can then select the Nforce drivers such as pilot. After that, you will need to know which chipset your motherboard uses. Once you get all the information it will take you to the download page for the drivers. Normally they have the available release notes to see what changes have been made by the pilots. If you decide to update, I would use the Nvidia site instead of the one offered from windows update. After installing the nvidia windows update stops offering you the update.
-
Firmware of the device wireless Broadcom lost in an update of the BIOS
Hello, I update my BIOS netbook (Aspire One AOD250). Since the original factory version v1.23 for one, lastest v1.29. Everything went very well but the card wireless; It does not work. Operating system tells me: Broadcom BCM94312HMG. Firmware is missing. Light on this matter does not blink and do not respond to the power button (on the case also). It seems that the wireless card has been removed from the computer.
How can I solve this problem? Does anybody know?, thank you.
You can try to Flash the BIOS to 1.23 and see if the wireless card "returns".
It should not be affected by a BIOS update.
You see the card in the Device Manager?
Where do you get the message "firmware is missing?
-
my computer has the power, but it does not start.
my computer has the power, but it does not start. crancking for several minutes, after that it will quickly be able to record and then it starts again. Also, he asked once to restore to an earlier date that I did. He worked for a night, but come back to the same thing. Help!
Hi moozer_890
1 during how long have you had this problem?
2. have you updated display drivers installed on the computer?Method 1 :
To resolve the problem, you can see if the uninstall and reinstall then the display driver-
Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.a. click Startand then click Control Panel.
b. click system and Maintenance, click Systemand then click on Device Manager.
Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
If you are prompted for an administrator password or a confirmation, type the password, or click allow.c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.
d. When you are prompted to confirm that you want to remove the device, click OK.
e. restart the computer.
After the computer restarts, the drivers will be installed automatically.
Method 2:If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site, then check.
You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyI hope this helps.
-
On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "This message appears for firefox, AVG, Windows live messenger, windows MediaPlayer etc.
I can access my documents, Panel etc. and everything is there, but it won't let me not get access to the programs.
Also when I go to click on itunes and open office it happens "this file has no program associated with it for performing this action. Create an association in the set associations Control Panel.
Given that I was able to access control panel, I was able to create a new user and use it for now to send this message and all programs have worked on it and I was able to check for the presence of viruses on the Avg on this and everything was clear.
Could you please explain whats wrong and tell me how to fix this please: D thanks
Hello
1. don't you make changes before the show?
2. is the computer is joined to the domain controller?
You can not start any application on a client computer that is joined to the domain controller. When you try to start this type of application, you receive an error message similar to the following:
"Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.This can also occur if the user account is damaged. If the computer is not connected to a domain controller, try the following steps.
1. connect to another user account and create a new user account to fix the damaged user account.
For more information about creating a new user account and the fixing corrupt user account, visit this link: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
Previous post the results in more detail, so that we can help you further.
I hope this helps.
Kind regards
Syed
Answers from Microsoft supports the engineer. -
Well, it's a long story, but EDH to; I had problems with my printer works with Win XP. The same problem as now with Win 7. I have e last driver of Dell, but Win7 says that drivers are up-to-date. The printer appears in the Device Manager, but has the yellow triangle with (!) to score on this subject. When I go to troubleshoot, it says it can't find the updated driver on the internet or the CPU. Win7 says that the printer says that's not covering, check USB port, etc... I uninstalled the driver, let W7 update, and the printer still does not work. What is the reference for this? Thank you... Corn
http://support.Dell.com/support/downloads/index.aspx
You get your Dell printer drivers; NOT through Windows Update.
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
Recently, my laptop have long beeps after turning the power on before launching the window and the last ringtone for 5-10 minutes. Secondly, keyboard seems to have problem because without pressing the letters that he is out nonstop by itself. Touchpa
-
cancel the print job on HP Officejet Pro 8610
How to cancel a print job on my HP Officejet Pro 8610... There is no X or cancel on the LCD screen. How to cancel the task once it starts? PC: Asus desktop computer; Windows 7; 64-bit process.
-
x 301 win7 Ericsson 3507 g card WWAN
Hi all Anyone got the map above to work with windows 7? Have you tried the following but it seems to make no difference. http://www-307.IBM.com/PC/support/site.WSS/Win7-beta.html#F3507g The error has said is "this device cannot start. (Code 10) » Som
-
install statspack in the oracle 12 - CDB or PDB database
Hi allI try to install statspack in a new ORACLE 12 c DB.The installation fails creation perfstat user in the ROOT container.My question, I guess that is if statspack can be installed as a common user - rdbms/admin scripts do not do this as common us
-
Setting default value for selectOneChoice when the Page loads
BPM JDev 11.1.1.5.0 I have a selectOneChoice component bound to a BPM data control. You need to set a specific value as the default value when the page is loaded for the first time.