Device not recognized USB message with iPhone 3g

Here's the story from the beginning, I hope that I have provide sufficient detail.

I got my iPhone 3 G is replaced. Therefore, a new phone... I went on iTunes in the middle of the restoration... It gave an error message and put my phone in recovery mode. Since my computer gives me the message "USB DEVICE NOT RECOGNIZED" and appears as an "unknown device" in Bus USB controller in Device Manager.

I went to apple and they finished the restoration... I plugged the phone on other computers... It is therefore not the phone.

Still nothing pops up... It keeps giving me "USB DEVICE NOT RECOGNIZED" I have uninstalled iTunes the right way... as Apple people walking through and reinstalled... the Apple Mobile Device is started.

I still get nothing... everything is... newly installed... Windows doesn't recognize just... that it doesn't show up as a camera... and it does not even charge my phone.

I tried different ports... and I get the same message... my camera and my sisters iPod shuffle connect correctly.

I really need help! I don't know what else to do... I need to work on this computer. It's a Toshiba Satellite Windows Xp SP3

I just went through two weeks of tampering with my 'old' computer trying to recognize my new 4370dn Canon multifunction printer after installing Windows 7.  I tried to reinstall Windows XP, uninstall the USB ports and hubs in Device Manager, update the printer drivers and several combinations of these elements.  In my case the ports would recognize external hard drives and flash drives, but my printer would come as a device not recognized.  Finally, what worked for me was to uninstall all the ports/USB hubs listed in Device Manager (they get automatically reinstalled with a soft reboot of the computer) again, download a driver from the Intel website (http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/16023/a08/infinst_autol.exe&agr=&ProductID=&DwnldId=16023&strOSs=&OSFullName=&lang=eng) chipset installation utility and restart the computer.  When I plugged the USB cable from the printer, the normal process of new device was launched.

Tags: Windows

Similar Questions

  • Device not recognized USB error message - all USB ports.

    Apologies if all this seems a bit simple, but I'm not an expert, so bear with me.

    I have a laptop Fujitsu Siemens Amilo Li 1718.

    My USB ports have stopped working in 2-3 weeks.  I get the message "USB device not recognized.  One of the devices attached to this computer has malfunctioned and Windows does not recognize... »

    I don't seem to get any yellow exclamation point in device, all my drivers in Device Manager and software are up to date and Windows Update is running.

    My mobile phone and ipod always charge when I plug them in and out of this problem, everything works fine.

    In addition to the usual updates of Windows, only two other things have occurred since last, they worked.  One was that I renewed my subscription to Norton Antivirus, the other was that my laptop battery ran right out while he was in mode 'sleep' as I did not know that I had not plugged to the socket properly.

    So far, I went through some process as suggested by various items and/or help & support on Microsoft.com.  They include:

    * (From multiple locations) system restore has failed.
    * Diagnostic software Ran Fujitsu Siemens, which says that my computer is fine.
    * Run the virus scan who come clean.
    * Tries to connect via a USB hub.
    * Deletied the USB controllers in Device Manager to re - install.
    * Changing the settings of ForceHcResetOnResume 3-to-1
    * Change AdditionalCriticalWorkerThreads from 0 to 2

    (The last two I've changed back again after neither worked).

    My opinion of beginner, it's that looks like it will create new registry details for each device when valid seem to exist already is not thankful.  Although given my lack of technical knowledge, this could well be stating the obvious.

    So, now, I drew a blank.  Anyone got any ideas?  Got 9 months left a 3-year warranty, I don't want to go through the hassle if it can be avoided without too much trouble.

    Thanks in advance!

    Tim

    Hello

    Maybe these will help.

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or does not work - a Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Have you tried to use an external hub powered by USB power is very limited in a computer and if overloaded
    strange problems will come up.

    ------------------------------------------

    Even if you did some of this departure please up and work until low and if necessary check
    with the utility.

    Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

    Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
    It RIGHT CLICK and UNINSTALL all. The device is your (s) or similar.

    now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

    APPLY/OK

    RESET

    This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

    Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
    USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
    Try to remove all instances and restart then plug the drive.
    http://www.NirSoft.NET/utils/usb_devices_view.html

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • LASERJET 1022 device not recognized USB

    When I connect my laserjet 1022 printer on my computer, I get the message "USB device not recognized". normally, I use Windows 7 64 bit, but I try to connect another computer that has Windows XP OS. Win7 or Win XP allows to print anything with appropriate drivers. I think that this is not a driver problem, it seems to be a hardware problem. Everybody respected this problem before, I can't use this printer.

    also we have an another 1022 that works, I replace my printer to it and my printer is not yet printed.

    If I have a hardware problem somebody advice me anything.

    Thanks for your help,

    The printer will print a test if not connected to the computer page? If this isn't the case, then the hardware problem is the printer that is connected.

    If you print a page of test if not connected to the computer, then the problem is on the side of the computer. Try another cable USB or port. Some computers, especially laptops, can have very delicate USB ports (my laptop Lenovo's ) and USB cables can go wrong.

  • Device not recognized USB keeps popping up - Windows 7

    I have been using a wireless keyboard with the Sony Vaio laptop with Win 7 64 bit for a year and, yesterday, the keyboard no longer works.  The keyboard works fine with 2 other laptop computers (Win7 and XP).  Even when I unplug the dongle, the message "USB device not recognized" keeps popping up ever minute or more.  All other USB devices (i.e., memory keys, portable HDs, etc) work very well.  I uninstalled all the USB controllers in Device Manager and rebooted (multiple times).  I tried to go back to a system since a couple of days restore point.  Nothing solves the problem.

    I wish that the keyboard to work again, but also really want the message stop appearing.

    Thank you.

    Thank you for your advice.  I tried all these.  None worked.

    Suggestions posted another user, I completely turned off my Sony notebook; has out the battery. waited a few minutes; restarted and viola - no more boring don't pop up error message, no error in Device Manager and I use the USB keyboard Adesso WKB-3000 wireless key in the response.

  • Device not recognized USB - mouse

    Hi - write a new thread that I raised in a previous which I suppose is not sought at the most. Mods - delete please if you always looked at the other thread.

    I started intermittently gel experience with my old USB mouse, so I replaced it, that to have my new mouse (Canyon CNR-MSL7) begin to experience the same problems. Intermittent at first, but it became unusable over time - error "USB device not recognized". I tried two mice in another PC and they work fine. I use Vista is said by the way.

    I had a hard disk separated on my laptop (Sony VAIO VGN-AR71S) failure so I sent away for repair. I advised the hardware failure Sony and my USB mouse problems - she is back with a new HD but they said they found no defects with the USB.
    the mouse worked for about 1 day before I started getting the error 'USB device not recognized' again.

    A system restore will obviously work for me because my hard drive has been replaced and I have the same problem I had before, despite the installation of the more updated version of vista to Sony.

    The laptop has the most until drivers date etc, but does still not more than 95% of the time. I went through different threads here and I checked that everything is fine with the USB etc hubs, but not joy.

    I checked the ports are feeding correctly and that they are.

    I tried power down, stop and remove the advice of battery given here that seems to have worked so well for people but it does not work for me unfortunately.

    Is someone of MS can advise if it is sought in order to create a solution that works for those of us who does not work for the option "disconnect"? I tried all the solutions to this problem listed on the various threads on this subject in this area and other forums. Or can someone tell me if there is anything I can buy to remove the problem? Equipment etc? I thought that an upgrade to windows 7 could help, but I've seen a lot of discussion here that clearly show the same problem that appears for people who use it.

    Another new mouse like the ticket to me if you have hardware problems (and this is
    my best bet).

    Rob - bicycle - Mark Twain said it is good.

  • Gamepad - "Device not recognized USB" Windows 7 32-bit

    I own an INTEX it-gpo2 plugnplay Gamepad... earlier it used to work well... but these last days, when I connect it to my pc an error indicating "USB device not recognized" I HAV changed the port, but it shows the same error... I HAV tried also to install the drivers provided on the cd, but it also won't work... someone please help...

    Hi ArkaBarman,

    This problem is usually caused due to hardware or driver related issues. I would like to know some information about this problem so that we can help you further.

    1. have you made changes on the computer before this problem?

    2 What problem confined to the joystick?

    3. have you tried to connect the gamepad on another computer?

    4. What is the model of the joystick number?

    I would suggest trying the following steps and check if it works for you.

    1. click on Startand then click Control Panel.

    2. click on system and Maintenance, click System, and then click Device Manager.

    Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

    If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    3     in Device Manager, double-click on it to develop a 'Bus USB controllers', right click on the controller host, click "Uninstall" and click "OK".
    4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

    Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

    Please respond with more information about this problem so that we can better help you.

  • Toshiba laptop A105-S1013 msg device not recognized USB.

    will not recognize usb keys.

    right now, I don't have connection capabilities as I am waiting for AT & T to connect with DSL.

    tried to connect to a wireless Belkin device but the USB does not recognize the he or the Belkin drivers on another device.

    find WiFi driver update on the Toshiba site. will try and install from a cd that this update talks of G which seems to me the minimum required here in our mobile Park that requires WiFi.

    Also will try to connect to the library or McDonald's today.

    Is there a way re install the software for the USB that comes with the CD of the OS? I also searched on Toshiba, but there is no update for the USB driver.

    Last January, I re installed Windows XP on this laptop and at that time there all worked as it should. Now, we're back in the Park and the laptop was not for months and it all started with the USB recognizing one of my memory sticks.

    Thank you.

    Larry

    Hi Larry,

    Follow these methods.

    Method 1: Follow the steps in the article.

    Advanced troubleshooting tips for General USB for Windows XP problems

    http://support.Microsoft.com/kb/310575

    Method 2: Update the chipset drivers.

    How to manage devices in Windows XP

    http://support.Microsoft.com/kb/283658

  • Booklet - USB device not recognized error message

    Hello

    I have a workaround for this problem that occasionally occurs. It's just to reconnect the USB hub (as recommended by Windows). I was wondering if anyone knows why this happens and how to fix it. The error is: -.

    "Unrecognized USB device. One of the USB devices attached to this computer has malfunctioned and windows does not recognize.

    Roob (2 ports) USB hubs - unused Port, unknown device.

    Recommendation: try to re-connect. If Windows does still not it, replace the device. "

    I can't wait to hear back on your part.
    Kind regards
    Julia.

    Hello Julia

    It is always advantageous to mention which model you have exactly. Of course the external device is not correctly recognized. Check if there is a driver that must be installed before you can use it properly.

  • Devices not recognized USB / can not install updates

    Original title: starts to feel like a Tennis Ball!

    I have an IBM ThinkPad Laptop and it can't recognize all usb devices. Windows asking me to contact the manufacturer and IBM wants me to get Windows updates... that will not be installed. I just want to SEE my flash drive. It has enabled updates Auto but as with "Satellite enabled", it is rarely if at all connected to the Internet at the right time. I want to just make sure everything iskosher, so I can eliminate all possibilities of why I can't see my flash drive.

    Hello

    ·         What happens when you connect the Flash drive to the computer?

    ·         Is the drive detected in Device Manager?

    ·         What is the version of Windows installed on your computer?

    ·         What are the updates pending or not installing on your computer?

    You can configure the computer to clean the start state, and then try to update the computer and check if that helps. To set up the computer in a clean boot state, follow the link below.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    For Windows XP:

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • device not recognized USB keeps popping... but I HAVE NO USB DEVICES PLUGGED IN!

    I have NO USB DEVICES plugged into my computer.  Yet, every half second, this obnoxious pop up with the sound that accompanies it, which makes my blood boil, has been annoying me since I bought my laptop.  I have NO USB DEVICES plugged into my laptop.  When I plug them in, they work fine.  If I get this error more I can't promise that I will not beat my laptop to 1 million coins...  Please for the love of Pete, someone tell me how to disable this dang thing!

    Visually check the USB ports for dirt or the twisted wires. Go to the Device Manager and under Bus USB controllers disable the hubs USB one at a time and check if the problem goes away for each hub.

  • Device not recognized USB (ipod).

    Whenever I plug my i - pod in port/iturnes I get a bubble indicating the unrecognized usb device.  I click on the bubble and try hard to shoot the driver.  Whenever he returns to the device "unknown"... Help

    Hello

    Are you able to other devices usb with no problems?

    Step 1: Perform automatic Troubleshooting Services and check out what he has to say.
    http://support.Microsoft.com/GP/hardware_device_problems

    Step 2: Uninstall and reinstall all USB controllers

    To remove and reinstall all USB controllers, follow these steps:

    a. click Start, type sysdm.cpl in the Open box and then clickOK.
    b. click on the hardware tab.
    c. click the Device Manager button.
    d. expand Bus USB controllers.
    e. right click on each device under the Bus USB controllers node and then clickUninstall to remove them one at a time.
    f. restart the computer and reinstall the USB controllers. (Restart the computer will install the USB drivers automatically.)
    g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.

    Also take a look at the article that could help you.

    Tips for solving problems of USB devices
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Device not recognized usb - USB failure

    Please please can someone help me, I have a problem with Vista. None of my USB work and I keep gettting the unrecognized USB device, showing both the State Bar and the Device Manager. I tried all the suggestions on the web, uninstalling the USB and resettlement, closing the power and remove the battery and wait 30 minutes then restart. Tried to update the drivers manually and still nothing works!

    Please can someone help me? I know the usb ports work as I can get the power of their hand.

    Thanks in advance

    Jcamm

    Hi Jcamm,

    Try disabling all USB Root Hub power management settings. To do this, try the following steps and check the result.
    a. Click Start, type devmgmt.msc and press to enter.
    b. expand USB bus controllers.
    c. double-click the USB root hub element, click the power management tab.
    d. uncheck "allow the computer to turn off this device to save power".
    e. click ok to apply the changes and restart the computer.
    f. check if the problem persists.

    Note: Disable the setting of power management on all the USB root hubs.

    See Install a USB device

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Vista device not recognized USB

    I tried all the suggestions to solve this problem. What else is there to do. Right now I'm running the systm scan through the command line. The last thing that I had plugged into my computer for the USB error messsage to appear was my iPod. I've never had other USB problems besides this one. I have an A135-S2326 Toshila provided with Windows Vista Home Basic already installed. I have the latest update and BIOS version. I have reset the BIOS to the default setting and changed the time. I unplugged the computer from its "source and the battery. I've disabled all the USB ports restarted the computer, their permitted again. I uninstalled all the USB ports and let Windows reinstall them. I did everything I know to do, and still nothing. I have read and looked for a solution over and over again. Can someone help me please. I am in desperate need of a solution like yesterday. Thank you!!!

    Try a system restore to select a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.Apple.com/support/iPod/

    And also ask Apple iPod support in their product

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    And download the latest USB Universal Serial Bus Controllers for your model laptop from toshiba.

    See you soon. Mick Murphy - Microsoft partner

  • filter prefix or device not recognized label message BlackBerry in VS 2008 and VS 2005

    BlackBerry: MasterPageFile = "path ~/Valid" Unrecognized tag prefix or device filter BlackBerry message in VS 2008 and VS 2005 after installing black berry plugin and manually record save file located in the folder 2.0xxx asp.net browser definition.

    I have installed the plugin for visual studio and tried to change the TimeTracker application by video tutorials but cannot add the prefix: BlackBerry: somevalidattribute = "" to change behavior that is specific to the browser of a blackberry. " What do I have to register or to add a reference in order to use the BlackBerry tag prefix, for example using the web.config file or the <@register>directive in the asp.net page?

    I solved the problem. I had to install IIS for the filter of BlackBerry to work in Visual Studio 2005 (although VS runs ASP.net development server) and run "C:\\WINDOWS\Microsoft.NET\Framework\v2.0.50727\aspnet_regbrowsers.exe-i".

  • We get the popup "USB device not recognized", when nothing is connected.

    Original title: pop up message

    I connected the USB cord to transfer information from your old phone to new phone via Itunes.  Since that time that I keep getting a pop up message that says: device not recognized USB, the defective device, windows does not recognize.  Nothing is plugged in, but message appears every few seconds.  How can I get him to stop?

    Hello

    It seems that you are getting the popup "USB device not recognized", when nothing is connected.

    What is the brand and model of your computer?

    I suggest to uninstall the USB controllers and check if you get the context menu.


    Method 1: Remove and reinstall all USB controllers


    a. clickStart, type devmgmt.msc in the start search box and press ENTER.

    b. expandBus USB controllers.

    c. right-click on each device under theBus USB controllers node and then click Uninstall to remove them one at a time.

    d. restart the computer, and windows will install the rear USB drivers.

    If reinstalling USB host controllers fails to resolve the issue, go to method 2.

    Method 2: See the procedure suggested by johnkelly46 responded on October 26, 2009, from this link.

    If you have additional problems, please reply to this post and we will be happy to help you further.

Maybe you are looking for

  • control extensions

    in the firefox add-ons Manager, how to disable users to turn off an add-on that is already running? via the config / user js file?

  • HP Deskjet F2180: Cannot scan a network printer

    Hello: the printer is connected to a home network [via USB hub] 2 workstations. The two PC can print without problem. But can not scan using Solution Center pop up. If the printer is connected directly to a PC, it can scan without problem, but the ot

  • reformat a 2 GB flash drive and I use windows xp professional

    I have a PNY 2 GB USB flash drive attached and I need to reformat. How to do that with my computer xp professional

  • virus/malware removal of Vista security 2012

    Hello, sorry I upset you date January 31, not very good is not. It's the fake MS Vista security 2012 malware virus. In fact, they hitted me 6 months ago 3 months ago there are one and a half months. Last 3 times I was deleted with success in safemode

  • Installed a Win7 on a new disk of 1 TB recognizes only the 500 GB.

    Replace a 500 GB drive in a laptop with a new 1 TB drive. Reinstalled Win7 Home prem on the new drive. After reloading of programs and files, I noticed that there are only 500 GB available. Windows did not offer a partiton questions I assumed that it