Device supports input clock samples?

Similar Questions

• By dividing the time base clock sample by N, we're the first sample on pulse 1 or pulse N?

  I use an external source for the time base a task of analog input sample clock. I'm dividing down by 100 to get my sample clock. Is could someone please tell me if my first sample clock pulse will be generated on the first impulse of the source of the base of external time, or about the 100th?

  I use a M Series device, but can't see a time diagram in the manual that answers my question.

  Thank you.

  CASE NO.

  CERTIFICATION AUTHORITIES,

  I don't think it's possible to use the sample clock of 3 kHz on the fast map as the time base clock sample on the slow map and get the first sample to align.  The fast card can enjoy on each pulse signal 3 kHz, while the slow card will have to meet the requirement of the initial delay before he can deliver a sample clock.  If you turn this initial delay a minimum of two ticks of the time base, the slow card eventually picking around the edges of the clock 2, 102, 202, etc..  You can set the initial delay for 100, which means that the slow card would taste on the edges, 100, 200, 300... but you wouldn't get a card reading slow on the first edge of your sample clock.

  Hope that helps,

  Dan

• clock sample question

  Hi ppl,

  I have a question for you.

  I have a very similar to the attached picture circuit. also you can find here (http://zone.ni.com/devzone/cda/tut/p/id/3615#toc4 , fig.2) I write some data on analog channels out and then I collect the data in the time loop. I don't understand what exactly is happening when I write the data in the buffer. Let's say I have a table of 2D 2-lines and 62500 columns that I want to write in the output analog channel, then read in the analog channel. I do not understand the meaning of the sample clock. (I read on operations 2 devices simultaneously and blah blah blah). What should be the sample clock frequency in the August channel and the channel of the ain and the number of samples per channel in the ain daqmx channel when I want to collect data? (http://zone.ni.com/devzone/cda/tut/p/id/2835; reading the data in example labview). My problem is that I do not understand what is happening when I load the August channel with data buffer; for example I put the sampling clock rate: 1000; meaning he will write each s 1000 samples of 62500 samples until the end of the samples; all of these samples that I drove from my out channel voltage piezo-beam-scanning engines. which means that each s piezo motors will get 1000 samples of tensions? now, I want to measure. should number of samples in the playback channel I put? I put my daqmx reading in the while loop. Let's say I put 100 Samper useful/channel. so, each itteration in while loop it will read the 1000 samples/channel buffer. How will I know that the buffer is already full with 1000 samples when ain channel tries to read?

  The process is therefore more; correct me please if I'm wrong. The sample clock will define us the buffer data rate. For example, I load the 2D matrix: 62500 2rows columns; It will load in the buffer and then there are these samples at the August channel of the rate defined in the clock sample string? Then I want to read from the channel of the ain. What sampling clock frequency should I set for the channel of the ain? If the sample clock rate for the playback channel sets the buffer? for example (I put it there 1000 samples/s; meaning it can read 1000 samples per second?) then what the number of samples should be in the read daqmx channel in the while loop?

  Please clarify me this point, I'm confused...

  Hi dimani4,

  There is a very comprehensive document that answers your questions. You can find this document here.

  This article explains the operation of the sample clock frequency and the DAQmx Read reading samples. Quoting the article: "On the hardware side, the Schedule VI DAQmx determines the flow rate of the device/sensor data at the hardware buffer on the data acquisition card.". Here is the 'Timing VI' the sample clock.  Then he also explained that "on the software side, the reading VI DAQmx determines the transfer of the data of the buffer material in the software". "." It is making reference to the samples to read the reading VI DAQmx.

  I hope this information specific to your questions.

• What type of device control / input is more suited to editing? mouse, trackball, trackpad, pad type Wacom or what you use?

  What type of device control / input is more suited to editing? mouse, trackball, trackpad, pad type Wacom or what you use?

  Hello

  If you change just pictures I would say that stick you with a mouse, but if you want to do anything that involves drawing or tracing, then you can't beat a graphics tablet. You can also have a mouse and Tablet working side by side if some of the drawbacks d gap specified can be overcome by opting for the mouse when required. Trackballs and keyboards are very good for spreadsheets and word processors, but useless for graphics programs in my opinion. Rohit and D pit mention Wacom Tablets and I'm one who sells for about £400, but I also have another from a Chinese manufacturer called Oh that is every bit as well - and believe me I am ultra picky about these things and that it sells on Amazon for £60, or 6 times less. The only advantage of the Wacom is when you want to do calligraphy because it supports what is called tilt, otherwise in many ways the oh is better - unless I use more than my Wacom. Many people will tell you the drivers are poor - well I am disagree the Oh worked with Windows 10 immediately while the Wacom took 2 hours to get it to work. You will find different designers will have different opinions however. If you win a lottery you get a Wacom Cintiq, which actually is a 27 inch monitor inspire you and you can't get a natural well more work than this, either as replacement of the mouse or a drawing tool - it's his £1800 - we can all dream I guess. Oh made one too for £500, but it is not so good, unfortunately.

  

• iTunes requires a newer Version of Apple Mobile Device Support

  I recently had a problem with iTunes not recognizing my iPhone, so I reinstalled the latest version of iTunes on my PC. Since then I have now received this error:

  iTunes requires a newer version of Apple Mobile Device Support. Please uninstall iTunes and Apple Mobile Device Support, then reinstall iTunes.

  I followed these steps, only to get the same error. I then stopped Apple Mobile Device Support Services, manually delete the files in c:\ProgramData\Apple\Installer Cache, repair the installation of iTunes and restart services, only to get the same result.

  I use iTunes 12 and 10 Windows.

  Would like to be able to sync my phone again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  See iOS device is not showing in iTunes for Windows , if the device will not connect to iTunes after reinstallation.

  TT2

• No device supported in the DAQ assistant

  Hi all

  I use the scanner high speed (NI 5922). I installed Labview 8.5.1, then the software scope OR the digitizer NI 5922 high of speed, then the hardware driver. I tested the DAQmx with the MAX and it passes the test. But when I started to use the labview with the DAQ assistant, as described in the manuals I have not found all devices supported! Should I log a physical device to the hardware driver channels or what should I do?

  Thank you

  Ibrahim

  The 5922 is supported by NO-Scope http://www.ni.com/digitizers/software.htm and not by DAQmx. This page should help you get started.

• Fatal error occurs when you uninstall Apple Mobile Device Support

  Original title - you can't uninstall Apple Mobile Device Support!

  I'm trying to update my iTunes and the iPod Touch, and in doing so, he failed and said that I needed to uninstall the Apple Mobile Device Support and completely reinstall iTunes.  In any case, I can uninstall everything except the Apple Mobile Device Support - I get a message that a fatal error has occurred and it is impossible to uninstall.  Apple told me that it was a matter of Windows and contact you for assistance.  I rebooted and everything else cannot remove one yet this app.
  (I'm on Windows XP Professional)

  Fixed the problem for me:

  I just went through a problem with Apple Mobile Device Support as well.  I continued uninstall then just before reaching 100%, it starts tracking return return to 0%.  I have windows 7.

  Panel--> uninstall a program

  Do a right-click Apple Mobile Device Support--> change

  A window will appear asking if you want to repair or remove.  I said repair

  Once the repair is completed, return to Panel--> uninstall a program

  Double click or right click, uninstall Apple Mobile Device Support.

  He appeared after that he says he has completed the installation, but when I right click on it windows says it has already been uninstalled and removed from the list.

  Hope this helps you like it has helped me.  I imagine that there is another way to get the option to repair/remove apple screen by running some .exe, then you can try to track down if you have an older operating system.

• Apple Mobile Device Support new download problems with update iTunes on XP

  iTunes tells me to uninstall both iTunes and Apple Mobile Device Support (AMDS) then reinstall iTunes and amendments comes with installation... Problem is that it is not download the new AMDS with the new iTunes, and I have a Windows XP

  * original title - I bought an iPod touch connected and installed the new iTunes and: you need the latest version of the Apple Mobile Device support *.

  This is the old version of AMDS: http://apple-mobile-device-support.software.informer.com/.  The thing is, you're using the latest version of iTunes this version can not install because iTunes includes a verson later program when it installs (and so installing this one can either do not work or may cause problems).  If you have the latest version of iTunes installed, you should already have the latest version of AMDS.  Do you mean that it is not compatible with XP?  You could try to downgrade to an earlier version of iTunes that does not include the amendments and use the link above to add and see if it works - but your iPod may require the latest version and does not work with earlier versions of if or not you want to try this (I wouldn't bother) is up to you.

  Try to run in compatibility http://www.howtogeek.com/howto/windows-vista/using-windows-vista-compatibility-mode/ Mode and see if that helps.

  If not, please repost your question in the forums XP: http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where the XP experts will be happy to help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hello.. I justwant to know, what are mobile devices supported by the Blackberry 5.0.4 Server? ...

  Hello..   I justwant to know, what are mobile devices supported by the Blackberry 5.0.4 Server?  ...

  is BES 5.0.4 supports veterans and the latest devices?

  Someone please help.

  BES 5 supports all devices that are not run BB10. This includes any device running OS 7.1 or lower (e.g. 99xx 98xx, 97xx, 96xx, 93xx, 92xx, 9000, 91xx, 95xx, 87xx, 88xx, 89xx, etc..)

  BB10 devices require a BES or higher to 10.

• Problem with Apple Mobile Device Support in Windows 7

  I can't install Apple Mobile Device support.

  I uninstalled all the components of iTunes, in the order suggested by the apple support.

  Apple Mobile Device support is not there - it does not appear as a program to uninstall; There no folders or files in Program Files (x 86) for her.

  iTunes works, but when I try to connect an iPad or an iPod, he said simply that the amendments are expired, uninstall and reinstall (actually that is not there, and still less to day).

  Then, when I try to reinstall iTunes, running as an administrator in an environment of clean boot, he goes through many steps.

  During installation, I can see it attack the AMDS, it copies the files and the green bar fills gradually until the end, he stops and poster "backward", the green bar go gradually back to nothing. It is then with all the other components and so-called ends successfully. But the amendments is still not there.

  The only place where I can find mention of AMDS is that if I look at services in the Task Manager windows - AMDS appears in the list even after all is uninstalled. Even if it is listed, it is not running as I put it to stop and it is disabled at startup.  None of the other components appear on my list of services when I uninstalled iTunes.

  I think that the amendments was not completely uninstalled, and there is somewhere that says that the iTunes install do not to install as a component somehing. AMDS always seems to be hiding somewhere, but I'm at a loss to know where or how to delete it.

  Any help would be welcome.

  You should ask in the forums of Apple. You can Google for the URL.

• I need a list of devices supported for VSOM 6.3.2

  I need a list of devices supported for VSOM 6.3.2.   The link I had previously recorded with this info for different versions of VSOM is no longer there is a world of Cisco.com.  Help, please.

  Thank you.

  I think that the list you're looking for are accessible through the portal of emerging Cisco Technologies to:

  https://www.ciscoet.com/resource/VSM-632-MR2-supported-devices-list

  I hope this helps!

  Scott Olsen
  Solutions specialist
  Bulletproof Solutions Inc..
  Web: www.bulletproofsi.com

• BlackBerry caught 10 devices supported

  Hello

  I recently received a rejected for an application because it is said that this does not work on the Playbook. As a minor note, I'm not a native English speaker but the answer I got from support:

  "The PlayBook appear as device supported when you select the minimal operating system for your application, because the PlayBook will not support OS 10 more later."

  UH... seems a bit contradictory to me and I guess that's the English lack of skills.

  So, since I don't have a playbook, support (native) 10.0 apps running? The answer above is in fact meant he will support them at a later date, but not now?

  Avantureux question aside, if I build the app with the 10.1 SDK (I did by mistake, the simulator which was 10.1 claimed an application built with the SDK 10.1), will still run on 10.0 devices? or does it need a device with 10.1 installed?

  PlayBook does not support the BB10 and requires separate binary files. Probably you have chosen a PlayBook when downloading the Cascades App can be ported to PlayBook in the future, but no dates have been announced yet.

  If you do not use any 10.1 specific API, most likely it will not work. They are compatible to the binary format. But to be sure, it is best to compile with the older SDK.

• How to determine if the device supports portrait / landscape views?

  Is there an easy way to determine if the screen of the device supports portrait / landscape views?

  (We need to provide different settings for the user)

  Until recently, we used check similar to the following:

  If OS > = "6.0" & AccelerometerSensor.isSupported)

  but this code does not work on the new Bold 9900 (which has the accelerometer, but has no landscape mode).

  We are looking for a solution that doesn't invlove by manually checking the models...

  Thanks in advance!

  You can use the DeviceCapability.isRotationSupported method to determine this.  This class has been added in BlackBerry Device Software version 6.0.

• How tdo I add a device supported in the supplier portal?

  Hello

  'Potential' user of ours sent me an email saying that it was not able to download our application to his BlackBerry "BOLD". He'll be back to me with the exact model number. We support only 4 models of "BOLD" from now (not touch ones).

  In fact, the app will probably work very well on the 9900 new but we just don't have it on our list of supported devices.

  So I have two questions:

  (1) if the user's device is not supported by our application, is it not see it in the App World?

  (2) how can I add a device supported via the provider Portal? I mean no return code. Can I make changes to the list quickly?

  Thanks in advance.

  (1) if the device is not supported, the user should not be able to see the application to all the

  (2) to set the phone support: go to see release (eye-like button), Edit, tab add the Release Version, scroll down, change the device supports, check all the boxes

• iPad: pilot USB MTP / Apple Mobile Device Support Driver update failed - access denied

  Hi all

  I do iTunes/iPad/AMDS rerun (Win7 Ultimate 64 bit). After the last update of iTunes to 11.1, I'm not able to install the Apple Mobile Device Support any longer. Usbaapl64 installation fails. Even a manual update is not possible (access denied).

  Before you uninstall, the iPad has been recognized as Apple Mobile Device Support, but using the old version located in system32. Same result trying to update the driver manually - access denied. After you have uninstalled the ADM the iPad is recognized as Apple iPad to portable devices (in dev mgmt). Updating the driver (and selecting the usbaapl64 in CommonFiles/Apple/Apple Mobile Support folder) still fails - access denied.

  Even to disable UAC, using the account hidden administrator and start Windows in safe mode will not grant access. I have no idea what to do now. Is this a normal behavior or y at - it something very wrong in my system? I don't want to format my system.

  Thanks in advance.

  PS: Windows is up to date
  P.P.S.: Tried numerous solutions of Apple, articles, forums, google, re - install iTunes and what you have. Nothing has worked.

  I have it.

  Have a look in the newspaper of the setupapi.app.log and setupapi.dev.log C:\Windows\inf files I discovered that management installation program / unit was not able to create a temp folder in C:\Windows\System32\DriverStore and was not yet able to copy the files in C:\Windows\System32\DriverStore\FileRepository.

  After you change the access rights (gave me and SYSTEM full access), I was able to update the driver USB MTP driver Apple Mobile Device real Support. Later, I was able to install iTunes without any problems during the installation of the pilot AMDS.

  Took me only 4 days to the indicator with the search in the log files mentioned above-. -.

  See you soon.