device USB to tv what format does?

my tv from asda dosnt say that it does not recognize the usb device format more why?

Hello

I suggest you to check the TV manual or the manufacturer of television contact for assistance.

Tags: Windows

Similar Questions

  • Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

    Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

    I'll try not to waffle too guys, so here's...

    Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

    But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

    After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

    A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
    The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
    Tried a system restore
    Tried to reinstall itunes

    When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

    Thank you comrades, cordially, Freddy frustrated. :)

    Another said I should go to Device Manager, uninstall all the USBs and restart.

    Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

    I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

    Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

    I guess that you don't see the error messages in Device Manager or you must declare them.

    You can uninstall all USB devices that do not exist as follows:

    • Open a command prompt window (start > run > cmd > OK)
    • Enter the following command and press enter

    Set devmgr_show_nonpresent_devices = 1

    • Start the Device Manager by typing the following in the same command prompt window

    devmgmt.msc

    • In Device Manager, click the view menu and select "Show hidden devices".
    • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
    • Reboot (with the iPhone NOT connected).

  • I get the message "device USB has malfunctioned and windows does not recognize it" when I connect my Ipod touch to load or put music on it.

    Original title: legacy A USB has malfunctioned and windows cannot recognize him does that mean?

    I get this message when I connect my ipod touch to load or put music on it. It worked before on both of my computers and I have not changed anything on one of them. I even bought a new usb cords just in case that was the problem, but still no luck. the funny this is that the battery in the corner of the ipod looks like he got some fees, but I'm not sure because of the message. I soft reset it and hard reset it I tried to install the new updates, but it is said that it is up-to-date. It is therefore unknown on my computer device how do I? someone please help.

    Hello
     
    The problem is specific to the Ipod?
     
    I wish that you follow all the steps in the article apple to fix the problem.
     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Apple Mobile Device USB Driver has not passed Logo testing for compatibility with Windows XP, I ran the suggestion to "fix" 925196 that it still does not work. What can I do else?

    Bought the iPhone 3 g (not 4) trying to run the material but get the following error: Apple Mobile Device USB Driver no has not passed Windows Logo testing to verify compatibility with Windows XP continues the installation of this software may impair or destabilize the functioning of your system.

    Windows XP Service Pack 3 is running.

    I ran the 'Fix - It' 925196 solution, but the problem could not be solved. What is a malware problem?

    Hi deanie3,

    We will check if the following is useful.

    Method 1: Run the next Fixit and check the issue.

    Hardware devices do not work or are not detected in Windows

    Method 2: Follow the steps in the below article mentioned to see if it helps.

    You cannot install some programs or updates

  • I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

    I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

    I have sandisk cruzer blade USB key

    Hi Rohit,

    Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

    1. You did it any significant hardware or change software on the computer before this problem?
    2. When do you get exactly the error message?
    3. Have you tried to connect to any other computer on this flash drives?
    4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
    5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

    The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

    Method 1:

    Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

    If method 1 does not work, try Method 2.

    Method 2:

    Remove and reinstall all USB controllers.

    1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    2. In the list of the categories of equipment, locate and expand Bus USB controllers.
    3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
    4. Restart the computer and let the USB controllers get reinstalled.

    Plug in the removable USB device and test to make sure that the problem is solved.

    If the problem persists, go to method 3.

    Method 3:

    This method will install the latest drivers from device to your USB device.

    1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
    2. Click find updates. When the scan finished, click optional review updates.
    3. Click the check box next to the update, and then click install updates.
    4. If you are prompted, read the license agreement, then click I agree.
    5. Follow the instructions on the screen to download and install updates.
    6. If you are prompted, restart your computer.

    More information: Update a hardware driver that is not working properly

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  • After disconnecting device USB to the laptop on Vista, now does not arrested

    IWAS downloading the pictures on my computer mobile partners with a usb device, he repeated that he was doing it & green bar kept moving, but nothing happened

    He has to go to work, he said take the computer usb device
    went to start menu to close, he repeats for nearly an hour now - logout...
    Help, please
    * original title - DON'T LOG OFF / SHUT DOWN - WINDOWS VISTA - JUST SAYS LOGGING OFF... *.

    Hello

    Force stop your computer, reboot and attempt to logoff or shut down again.

    Let me know if the problem persists.

  • W7 ready boost: what format for USB?

    W7 ready boost usb key: what format for better performance, Fat 16, Fat 32, NTFS or exFat?

    One of them will do, personally, I would recommend FAT16 for compatibility reasons. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

  • When I check "you sign out all other computers or devices", what exactly does?

    I managed to have more than two Mac want to use my CC Apps.

    One of them is a MacBook, I borrowed some time ago (when my good old MacBook was stolen) to continue to work, the other is my iMac, and the third is my new MacBook Pro I am setting up right now.

    As I don't have easy access to this borrowed MacBook more, I thought "you sign out all other computers or devices" is the ability to get rid of unnecessary activations and start all over again. In this way, I think that I can activate all my apps on my new MacBook Pro and once again on my iMac.

    But how it works? He really disable CC on all devices?

    Or what I need to "manually" disable on this MacBook borrowed in any case.

    Only disable it on my iMac is not an option, because I (want to be able to) constantly switch between my iMac and my new MacBook Pro. Disable and re-enable are much too heavy.

    Bottom line:

    "You sign out all other computers or devices" really turns off all devices (even if you don't have access to it) and start with a clean slate?

    Yes.

    I use usually when you go on vacation and from my laptop (usually at the airport for some work) when I know I forgot to turn off on my home or office computer before leaving.  I get disconnected from my home computer and office and I am able to use my laptop on my trip.

    When I go home, I start one of my home/office computers and do the same (this time of disconnection from my laptop because I forgot to do upon his return from vacation).

  • How to use ANSI C / C++ to control a device USB - 6216 BNC

    Dear Sir or Madam,

    I want to use Visual C/C++ (but not the .NET language) to contorl a device USB - 6216 BNC and write a simple app for a small project in my lab. What I want to do is very simple. I want just to provide a signal to exit through a channle AO and saving an AI channel input signal. I do not want to LabVIEW, LabWindows/CVI, and Measurement Studio, so that this simple application can be autonomous and does not depend on LabVIEW, LabWindows/CVI, and Measurement Studio. Can anyone advise me on what I need to do to get there?

    My naïve thought is that I will follow the following steps:

    1. install the DAQmx drivers on acomputer,
    2. Connect the device USB - 6216 BNC to this computer,
    3. Make sure that the device is recognized by the computer, via the Windows Device Manager
    4. write a Visual C/C++ program to register the NIDAQmx.h and use the NIDAQmx.lib library. By the way. I found the files NIDAQmx.h and NIDAQmx.lib in the C:\Program Files x 86) \National Instruments\NI - folder DAQ\DAQmx ANSI C Dev\ that was automatically created for me when I installed LabVIEW on another computer in the lab m a few years ago.

    Please let me know if I missed something. In addition, if there is a code example for a simple task like this, it will be extremely useful.

    Moreover, the computer on which I am working on a Windows 7 and 9.3 DAQmx installed.

    Thank you!

    Fuh


  • Peripheral USB has malfunctioned. Windows does not recognize it.

    Peripheral USB has malfunctioned. Windows does not recognize it.

    Hello

    ·        What is the exact error that you receive when you try to connect USB?

    ·        Since when are you facing this problem?

    ·        Which device you are trying to connect via USB?

    ·        This problem occurs only with a USB device or USB devices?

    Method 1:

    You can try to plug the USB key into a different USB port and check if you face the same problem.

    Method 2:

    Also I suggest to Uninstall USB controllersfrom Device Manager and check if it solves the problem. To do so follow the steps below:

    (a) click Start

    (b) the Device Manager type in the search bar and press ENTER

    (c) in device manager, go to the bottom and double click on Bus USB controllers, this will open a list of USB controllers to uninstall all controllers and restart the system this will reinstall all USB controllers again.

     

    Method 3:

    I also suggest to run the difficulty he provide in the link below

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    Method 4:

    You can also try to update the latest drivers for chipset on the motherboard manufacturer's website.

    WARNING:

    Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    You can also check out the link below:

    Thank you, and in what concerns:
    Naman R - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Device "USB" only is not supported after conversion

    * _Running vSphere + ESXi4 (paid and free) _ *.

    I have a XP system that has operated for some time, with 2 USB Dongles for software installed on VMWare Server authentication.

    Recently I found USB Net ShareStation IOGear solution for sharing USB devices over a local network, so I tried and managed to convert the virtual machine to free ESXi and successfully used the USB devices.  Perfect!

    However, I want to save this virtual machine using Veeam Backup, I need it in my firm paid ESXi so I converted again using the stand-alone converter, but I get the following message if poster every time I try to start it:

    Ons power failure

    vCenter could not find a suitable host to power on the virtual machine for the reasons listed below

    & lt; VM & gt;   & lt; NAME of HOST & gt;  Device 'USB' is not supported.  It is a virtual hardware version general limitation of the virtual machine on the selected host.

    If I change settings and delete or one of the USBs listed as not supported, I get again theerror:

    "USB" device is not supported

    and she does not.

    I only am not familiar with editing ini files so would appreciate pointers that would allow me to remove USB devices manually if this is what it takes so it wil boot.

    Thank you.

    You are welcome

    If you think that my answer was helpful, please give points.

  • What exactly does the Time Machine backup?

    What exactly does the Time Machine backup?

    We have a Mac Pro towers (NOT for sale) and Mac mini with several hard drives installed internally.   Time Machine backup all internal disks or just the boot disk?   This can be configured?

    Time Machine backs up your default boot partition. However, if you have more than one drive or partition on your Mac (and it is formatted in "Mac OS extended (journaled)"), you can set the Time Machine to save these drives too. You can do this by removing these drives from the list of excluded items in System-> Time Machine-> Options... Preferences, so that the next backup will include all internal hard drives or partitions that you want to back up too.

  • Trying to simulate the device USB-6366 (without success)

    I read through the tutorials DAQmx and MAX about the simulation of the device, but I can't yet find a way to effectively simulate the acquisition and generation of a signal using a device USB-OR-6366.

    I am a (given at the entrance of this VI) signal using DAQmx Write and then use DAQmx Read to read the signal captured from the internal memory of the card (which has a buffer of 32 MS). To do this, I created a task with DAQmx I feed in the writing block.

    I know that the approach is most likely wrong, but I can't understand not just how to do this in a simple way and documentation of NOR is anything but simple. All I want is to

    (a) test using 2 digital inputs to capture this signal by the device and then read what she has gained from its internal buffer

    (b) send the same signal to 2 digital outputs the signal output again.

    See you soon

    Yes! the simulation is designed to allow you to write a program and check that it works theoretically even if you do not have the material physically available. It has no interface programming to influence on the what the reading functions will return simulated data. And write the function has no notable effect anywhere, working as a receiver of data in nirvana. It is always useful because you can test software without getting all kinds of errors on the non existing hardware access attempt, but it has its limits, of course. However, a programming interface for manipulating that which and how the data are simulated, while it would be a very interesting feature, is almost certainly to complicated not only to implement but also to use.

  • Device usb camara

    I always have a problem with him.  NO DRIVER FOR IT. I have the disk but no function with usb camara. What I can do, I tried erlier driver too but have the same problem.

    [Moved from comments]

    Hi WilfredoBetances,

    1. What is the number of brand and model of the camera?

    2. what version of Windows you are using on the computer?

    3. you receive an error message/code?

    4. What is the exact problem are confronted with USB camera on the computer?

    I suggest you to see Help links and check if it helps.

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Automatically get recommended drivers and updates for your hardware
    http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

    For your reference:

    http://Windows.Microsoft.com/en-in/Windows7/how-do-i-get-pictures-from-my-camera-to-my-computer

    http://Windows.Microsoft.com/en-in/Windows7/install-a-USB-device

    Response with more information to help you.

  • Cannot start device USB (code.10) error

    Original title: device usb ayre

    Cannot start this device (code 10)

    Hello

    1. what operating system is installed on your computer?

    2. don't you make changes to the computer until the problem occurred?

    I suggest you try the steps from the link below and check if it helps.

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers: http://support.microsoft.com/kb/943104

    Hope this information is useful.

Maybe you are looking for