Device wd my book sudio 2 2 tb windows update failed to install

I made this site WD Web said on the installation of the usb wd my book 2 TB studion2. then windows did an update and it failed. I installed the net framework 3.5 you need for installation. Downloaded the driver from the its. What should I do next?

Hi Walter Sheib,.

1 Windows operating system you are using?

2. What is the brand and model of your system?

2. you receive messages or error codes?

You can consult the following Western Digital support article and see if it helps:

Where to find a driver for a WD product or operating system (OS) fails to recognize a WD drive

Hope this information is useful.

Tags: Windows

Similar Questions

  • Error: One of the USB devices attached to this system has malfunctioned, and windows does not recognize it.

    tried already everything written here. When I plug my USB device (3 of them) my Windows a sad of the USB devices attached to this system has malfunctioned, and windows does not recognize it. I tried plugging it into another winXP machine, it won't work. Can you help me?

    Original title: usb malfunction

    His salvation,

    Thanks for posting your query in Microsoft Community Forum.

    1. What are the troubleshooting steps you have tried so far?
    2. If it works much earlier? If so, did you do changes on the computer before this problem?
    3. What type of USB device you are using?

    As you mentioned that the USB device does not work when plugged into a WinXP machine, it may be a problem with the device itself. In addition, the question may also arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows.

    Therefore, I suggest you try the following methods (skip the ones that you already tried) and check if the problem persists.

    Method 1:

    Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

    If method 1 does not work, try Method 2.

    Method 2:

    Remove and reinstall all USB controllers.

    1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    2. In the list of the categories of equipment, locate and expand Bus USB controllers.
    3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
    4. Restart the computer and let the USB controllers get reinstalled.
    5. Plug in the removable USB device and test to make sure that the problem is solved.

    If the problem persists, go to method 3.

    Method 3:

    This method will install the latest drivers from device to your USB device.

    1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
    2. Click find updates. When the scan finished, click optional review updates.
    3. Click the check box next to the update, and then click install updates.
    4. If you are prompted, read the license agreement, then click I agree.
    5. Follow the instructions on the screen to download and install updates.
    6. If you are prompted, restart your computer.

    More information: Update a hardware driver that is not working properly

    If the device fails after updating the driver, you can try to roll back the driver with its previous version.

    Restore a driver with its previous version

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  • Get "Windows could not obtain the list of devices from Windows Update, please try again later"

    Trying to load the printer driver for HP DeskJet 990c on Win7 64-bit (Intel i7 - 2640M). All online sources, including HP say pilot is available by clicking on "Windows Update" in the install printer driver dialog box. In doing so, always get message "Windows could not obtain the list of devices from Windows Update, please try again later".

    Windows Update is set to "Download updates but let me choose whether to install them".
    Downloaded and extract full X 86 driver catalog (X 86 - all - 4189_1228a7cf7b1aac21346b20cb6e21db409dde9e72.cab) from the Windows Update site http://catalog.update.microsoft.com/v7/site/Home.aspxcatalog. 'Disc', stated in the dialog of the printer driver install and selected prnhp001. INF, received immediatelt message this specified folder does not compatible device driver.
    Also tried to do the same thing with the IA64 catalog (IA64-all - 4190_6e0f85bb67d0038a6406fc71b777a1906a87888c.cab), not surprisingly has the same result.
    Also tried to do the same thing with the AMD64 catalogue (AMD64-all - 4188_bacd1413e93b4a6362d9a2ca653c869f1c02f6f7.cab) and curiously that appear additional list catalog successfully. However, when choosing hp deskjet 990 c, as soon as the driver begins to install the error box appears saying "printer driver not installed, the operation may not be completed (error code 0x00000002).
    Cannot find any other relevant catalogues on the site Windows Update Catalog (which is X 64).
    Have tried to launch MicrosoftFixit.wu.RNP.85259331246416206.3.1.Run.exe, which is worth 1 point fixed, but has no effect on the problem.
    A short of ideas. How can I get my hands on 990c driver for Win7 - 64 Intel?
    Thank you.

    .. .the printer I'm trying to install is a HP DeskJet 6122.

    You should have clearly stated that in your first post.

    See this related thread in the Hardware Win7 forum-online http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-driver-for-hp-deskjet-6122/a70f56dd-5be1-4ad8-bba9-701a09f8392c

    more than 25-online http://answers.microsoft.com/en-us/Search/Search?SearchTerm=6122+deskjet&CurrentScope.ForumName=Windows&CurrentScope.Filter=windows_7-hardware&askingquestion=false

    Once again, good luck.

  • iBooks - bookmarks, notes and other syncronization between devices with imported books

    Hello!

    I was wondering if there are any fay to synchronize bookmarks m, notes and other stuff acros my devices in imported books iBooks! (ePub)

    It would mean so much to have this featur. I see that the books syncronize on iCloud in the new iOS 9.3, but what about notes?

    Best regards

    Erik

    On my devices, iBooks is made salient and remarks on the ePub files synchronization. However it does that when I restart both devices.

    I really like the app and was happy to hear that I could sync between devices via iCloud downloaded items. However, at this time, I can't afford to jump through hoops to get my sync annotations. I must be able to retrieve any device and have it ready on the go.

    If this problem is not resolved, I'll have to give up the iBooks app once again in favor of something that works...

  • No puedo instalar hardware device Epson Stylus Photo T50 y el problemas windows solucionador no lo can reparar una respuesta por favor Necesito UN

    No puedo instalar hardware device Epson Stylus Photo T50 y el problemas windows solucionador no lo can reparar una respuesta por favor Necesito UN

    Hello

    See this page to select your language:

    http://support.Microsoft.com/common/international.aspx

    ====================================

    Or sorry that it is area English.

    On the top of this page for answers click v (English) in the United States and set on your tongue.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Will my emails and address book that I use in Windows live in VISTA, they all are copied in Windows live in WINDOWS 7 if I update.

    Will my emails and address book that I use in Windows live in VISTA, they all are copied in Windows live in WINDOWS 7 if I update.

    You will find public support for Windows Live Mail in this discussion group: microsoft.public.windows.live.mail.desktop

    Via the web interface:
    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.live.mail.desktop

    Through your News Reader:
    News://msnews.Microsoft.com/Microsoft.public.Windows.live.mail.desktop

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • 0 x 80070424: when I use Windows update to download and install hardware (MTP SAMSUNG Mobile device).

    Hi, I got error 0 x 80070424, when I use Windows update to download and install the hardware (SAMSUNG Mobile MTP Device), no matter what Advisor.

    Thank you

    Essam

    Hello

    Thanks for posting in the Microsoft community!
    You have reached the right forum for your question. If I understand correctly, you receive the error 0 x 80070424 when you Windows update to download and install the equipment. I suggest you follow the troubleshooting steps to check if this may help.

    1. don't you make changes on the computer before the show?
    2 is the issue limited to Windows update?

    Method 1:
    Run the fix it and check.
    http://support.Microsoft.com/mats/windows_update/

    Method 2:
    Try the procedure described in the article knowledge base and check if that helps:
    Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall
    http://support.Microsoft.com/kb/968002

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry in Windows:
    http://support.Microsoft.com/kb/322756

    Just reply with the results. I'd be happy to help you further.

  • One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

    Original title: USB device not recognized

    Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

    Hello

    (1) is the specific question of specific USB devices?
    (2) did you of recent changes to the computer before the show?
    (3) have you tried plugging the USB stick on another computer?

    (4) what is the brand and model of the computer?

    I suggest to refer to the following methods and check if it helps to solve the problem.

    Method 1: Hardware devices do not work or are not detected in Windows

    Run Microsoft Fixit mentioned in the article.

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2: USB Port may stop working after you remove or insert a USB device

    http://support.Microsoft.com/kb/817900

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

    Reference:--

    Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

  • one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

    I get the following message when I join my computr "one of the usb devices attached to this computer has malfunctioned and windows does not recognize," my nokia C3
    kindly help

    Most often when a device is not it's because of a driver.  Try reinstalling your.

    It works for win 7 & 8

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

    http://captaindbg.com/how-to-update-drivers-on-Windows-7/

  • Windows Update "Advanced Micro Devices, Inc. - WDDM1.3 graphics card - AMD Radeon HD 7600 M.

    HY

    I have to update windows ' Advanced Micro Devices, Inc. - WDDM1.3 graphics card - AMD Radeon HD 7600 M "couple months there after installation it it stuck on the home screen and I have to fix...

    Is - this happen because a failed installation or update is already broken?

    Please repeat as soon as POSSIBLE. Thanks before

    Hi Tommy_Surya,

    If you are able to get the login screen try see if you can boot mode safe this Microsoft support link will show you how to do this.

    If you are able to try to uninstall the following Windows updates: KB2982791, KB2970228, KB295719 and KB2975331. Then restart your computer normally. If you do not know how to uninstall an update of the second part of this third link will show you how do it. Let me know how it goes.

  • I use a USB device for the first time. My computer windows Xp does not recognize. How can I fix this prob, and where can I get the info to fix it?

    When I insert my USB for the first time, it is said that it has malfunctioned, and windows does not recognize it. Am I missing driver for USB or what? I need step by step instructions on how to fix this prob. I'm an amateur. Thank you.

    I need step by step instructions on how to fix this prob. I'm an amateur. Thank you.

    Step 1.  Identify the make and model of the USB device.
    Step 2: Identify the version of Windows XP you have, including service pack (start > run > winver > OK)

    Although the following steps 1 & 2 you could get extra help, I suspect that the 'USB device' has indeed "defective" and you have to go back to where you got it and request a refund or a replacement.

  • XP SP3 cannot remove Windows Update: ITE - other hardware - UMass Storage Device (330). Causes BSOD when connecting memory card reader.

    Ativa AT-52N13 card reader worked fine until I installed the update from the window: ITE-other hardware - UMass Storage Device (330).  As soon as the card reader is connected I get a BSOD: BAD_POOL_CALLER.  Windows stopped not to damage your computer.

    Stop: 0x000000C2, 0 x 00000007, 0x000000CD4, 0 x 02040001, 0x8996A808

    The update is not listed in Add / Remove programs.  I don't know which driver I should delete.   Ativa, Office Depot, does not list the drivers for this device on their website and have been zero help.  Cannot find how to remove this update of any resource of Microsoft.  Any help would be appreciated.

    Windows XP device drivers using beats BSOD
    http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_july09.mspx

    Tip: Only get required updated driver from the download page of the manufacturer of the computer or device, NEVER of Windows Update (i.e., hide driver updates available through Windows Update).

  • Error - "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

    Original title: USB device not recognized / dysfunction

    "Unrecognized USB device".
    One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. Help for this problem, click this message. »

    This is what I get AFTER that I had to reinstall windows XP because a virus has attacked my computer a little before avg and Microsoft security essentials picked it up and destroyed... I have reinstalled twice... then I changed discs since I have two... well, I get this message from my 2 external Seagate Freeagent and my Phillips mp3 go gear aria... player these devices work on the laptop from my friend and she is under vista. It seems that since then they have worked on my computer before they would always run. My mouse and my cam work fine and my Canon printer gets thus detected... a few readers who have the space that is made... Ive looked everywhere for a solution... even upgraded windows media 11 and is player went to service pack 3. restarted several times... tried dPower Management tab and tried to

    Open recognition of the USB device by using Device Manager.

    .. I am at a loss: P please help thanks!

    isable the power management of the USB hub and I couldn't find the

    Hi LadyDefi,

    You can try to uninstall and reinstall the USB controllers and check:

    To remove and reinstall all USB controllers, follow these steps:

    a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.

    b. click on the Hardware tab.

    c. click the Device Manager button.

    d. expand Bus USB controllers.

    e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

    f. restart the computer and reinstall the USB controllers.

    g. plug in the removable USB storage device and test to make sure that the problem is solved

    For more information, see the following article:

    Advanced troubleshooting tips for General USB for Windows XP problems

    http://support.Microsoft.com/kb/310575

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Device driver problems"the operation requires an interactive window station

    Original title: device driver issues "the operation requires an interactive window station.  replaced the bad hard drive on laptop running Vista with Windows 7 HDD.

    I had two toshiba laptops satellite. On one, the hard drive went bad, the other liquid has been spilled, and the keyboard in ruins. The one with the bad hard disk was Windows Vista.  I replaced it with the hard drive of the other computer that uses Windows 7 Home Premium. Initially, it appeared, it would work without a problem, but I device driver problems.  First of all, it is audio and video.  When I updated the driver audio and restarted, Syntec PS / 2 touchpad no longer works. I tried (using the keyboard only) for updating the touchpad driver, but ultimately it fails with the message "the operation requires an interactive window station.  Then I tried to install a USB Microsoft Intellipoint mouse, it seems that the driver will be installed, but I had to use the keyboard to accept the terms and conditions. Then it errors "Setup was unable to install a required component: Microsoft Application Error Reporting." Restart your computer and try running the installer again. If this error occurs again, see the Readme file in help for more information. (Error code 1601).  How can I get my device drivers all working correctly?

    Best option is to reinstall the operating system.

    Also check this:

    This operation requires an interactive window station.
    http://www.TomsHardware.com/Forum/235014-44-this-operation-requires-interactive-window-station

    If the laptop is under warranty, contact Toshiba.

  • Error "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." when you connect Logitech M225

    Original title:

    My wireless mouse works fine for the last 2 months, now, all of a sudden it doesn't work at all.

    I get a windows notification that says-

    "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."

    I have Vista 32 bit OS on my laptop.

    My office has Windows 7 32 bit and I am able to use the mouse on this computer, then the M225 is not defective.

    I tried to look for a download of update on the site of Logitech & only found:

    6.32.20 set - point it did nothing to help.

    I also tried to move the receiver to the other 2 ports USB w / still the same results.

    Are there other downloads or solutions that will help w / this problem?

    You can also try searching for devices strangers (with yellow symbols) in the Manager under the mouse devices and other pointing devices and other devices (if any). Right click and uninstall unknown devices. Then restart.

    Also try the steps below to reset the power of USB:
    (a) the laptop off, unplugged from the wall outlet.
    (b) remove the battery for a few minutes, then reinstall it.
    (c) then restart the laptop.

Maybe you are looking for

  • the malware "Ransomware".

    I read an article on malware "Ransomware", which in the past was only targeting systems based on Windows, is now targeting mac computers. Should I worry about this on my MacBook Air?

  • Fill the table with the formula nodewith a line of code

    Hello This is my first post of the community, OR maybe this question has been asked 1000 times but I could find no answer. Before using LabView I used Matlab a lot. I find a bit that it's too complicated without reason sometimes in labview work with

  • Pavilion 500-232el: is MSI gtx compatible with HP pavilion 500-232el 750ti?

    Hello I want to update my graphics card. I'm looking for a MSI GTX 750ti. is this card compatible with HP pavilion 500-232el? Thanks in advance, Alessandro

  • HDMI not recognized

    I fight with my HP ENVY 15-j059nr Quad Edition laptop PC... I've been a fan of HP and Windows for many years. I'm under Win 8.1 and just moved all my old Pavilion Entertainment PC. I spent hours last night download all updates of proposed pilot. It s

  • BlackBerry BrowserField: The Application crashes while downloading.

    Hi, I use browserfield2 in my application to load Web pages, now the problem is the application is always unexpected crashes while downloading, no problem to download the file with size < 500kb="" but="" if="" the="" file="" has=""> = 1 mb size it wi