device will not go up

Similar Questions

• BlackBerry Smartphones after upgrade attempt for 8310, device will not - restart only flashing red

  Problem: I tried to upgrade the software of the device to 4.5 and now THE DEVICE WILL NOT RESTART at ALL. Not with a hard reset. Not using the SIM card and the battery of my 8310 and put in his. Nothing. Just a red light that flashes in a model: two quick flashes then pause; two quick flashes then a pause, etc.

  Reminder: This 8310 got to. 4.2.2 software device and something like 2.6 on the desktop. I have downloaded/upgraded to 4.6 for the office and 4.5 for the device since the AT & T site. The Director of office prompted me to install the new software for device... good. After a few minutes, I get an "unknown error" message and it stopped the installation. Following a support article, I uninstalled reinstalled two updates, but then the problem occurred: NOTHING happens on the screen of the device at all, just the red light flashing when the unit is plugged.

  The AT & T store told me that it's the tenth 'dead' curve he is seen in about a week, apparently all occurring when people tried upgrading the software. All the thoughts/help to offer?

  Help, please!

  Check this instruction:

  http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

• My IOS devices will not synchronize wifi with my MacBook air

  My devices will be simply not sync over wifi with my Macbook air. The message that appears on iPad, iPhone etc. is that they will be synchronized if the Mac is connected. I tried, but it did not work.

  "My devices will be simply not sync over wifi with my Macbook air."

  Via Wi - Fi requires the use of iCloud to synchronize data between your devices iOS a your Mac.

  http://www.Apple.com/icloud/Setup/

• Device will not be displayed in iTunes!

  My iPad 2, iOS 9.2, will not be displayed in iTunes. I looked for answers online, and I can't find anything. My device is allowed in the iTunes account and my iPad 2 is allowed on computers. I checked the USB ports, etc and I can't find anything! I hope someone can help me!

  If iTunes does not recognize your iPhone and iPad, or iPod - https://support.apple.com/HT204095 - https://discussions.apple.com/message/29983567#29983567

• My Safari tabs opened by other devices will not update

  I have tabs open other IOS and devices Mac OS and they will not regenerate on my Mac. Is it possible to update manually? No idea why it cannot be auto refreshing/getting updated?

  Thank you.

  Try the settings/iCloud and remove the synchronization. Wait a few minutes and then resynchronize.

  Try to go into System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing.

  Have you tried the signature to iCloud and then reconnect?

• Bluetooth devices will not connect after a long period of absence

  It started in the last 3 months, I'm not sure of that OS upgrade specifically.  I currently have Version 10.11.3.  I have a MBP late 2011.  I use a keyboard, trackpad and bluetooth magic, bought the same time as my mac.

  Whenever I come back from a business trip (usually a day or two max), my bluetooth keyboard and trackpad will not connect.  They appear in the drop down bluetooth devices, but when I select Connect, nothing happens.  I did everything the new standard batteries, SMC/PRAM reset, nothing helps.  I then manually have to pair them up with difficulty using Set Up Bluetooth Trackpad/keyboard.  It will show "found", then say could not pair.  I have the power on the devices several times his cycle, and then hold the power button 'on' to the pair.  Usually, it takes 5-10 minutes and is terribly frustrating.  Once I get the paired, as long as my stays Mac in the same room with the devices, they pair very well.  Appreciate the advice.

  99 + % of the time, there is a previous event - you indicate that this has been the case for «...» 3 months... »

  What event would it? Upgrade to El Cap? Nothing at all you can think of that has occurred "3 months ago"

• Sansa Fuze - device will not start error 10

  I know that it's all over the forums and believe me, after trying the support of Sandisk I scoured the entire internet and put into service each available remedy.

  Here's the deal. I have a brand new Sansa Fuze 4 GB. After taking its packaging, I plug it on my desktop (Windows XP, SP2) and I get the message "USB device not recognized". I tried every single USB port, including a self-powered USB hub.

  I am the administrator on this computer and I added myself as a "Net localgroup Administrators local service' - whatever the hell that means.

  I have installed and reinstalled WMP 11 and the MTP Porting kit. I tried all of the fixes in MSC mode. I tried all the fixes on three separate, all computers running the same operating system - one is a laptop.

  I contacted the helpdesk of SanDisk and their corrections were more extensive that I found on the internet, the results have not changed.

  So, if someone can help me. I don't understand why this unit is so full of bugs. I don't understand why it will not work right out of the box as announced. It's actually a Christmas gift for a friend, so the clock is ticking. I wanted to have this thing set up before unleashing it on it. I'm sure that some bugs he get up and running should be echoed on his computer!

  Brand new? Bring her back. You probably have a lemon. Or have SanDisk replace it. \

  Edit: You could also have a bad power cord. But this the heck, replace all the way.

• error code 19; TSSTcorp CD/DVGW TS-H652M ATA Device will not load at startup upward due to incomplete or registry problem? What can I do from here now, Windows VISTA-32 bit; gives this code problem also 00000013, thanks for your time.

  error - coded 19; involved device is CD/DVGW - TSST Corp. CD/DVGW TS-H652M ATA DEVICE. does not load at startup, nor do I have an icon E:\drive on my related 'Computer', only C and D of backup disks, since it has failed to load.  E is my player device on the windows vista operating system to 32-bit.  I tried the driver down load and FIXIT online program, they say that my drivers are repairable, but the problem is in the registry and device instructions at the beginning upward. What should I do next!

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• peripheral mass storage USB "unplug safely device" will not be released

  I plugged my camera memory chip and it does not load so I check the Device Manager and says USB Mass Storage Device "probably delete material" and I had not removed the chip... I had already deleted... that it will not come out... I tried to reboot so far with no results and tried to put the chip in and out to try to put in place the "surely remove device" to come and he did once but that didn't help... I will try to shut down the system and see if it works... has someone else had the same problem?

  Hi Jamievee,

  1. don't you make changes to the computer before the show?

  Follow the steps in the link given below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  If the steps above did not help, then you can try to format the chip on another computer and then check if the chip is detected.

  See the link provided below in order to format the drive.

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

  Note: Formatting erases all existing files on a hard drive. If you format a hard drive with files it contains, the files will be deleted.

• Optiarc cd - rw crx880a ata device will not recognize any cd

  I have an acer laptop. It is an Optiarc cd - rw crx880a ata device. It will not recognize any cd / dvd... He appears with insert the cd. I open and close the cd drawer and always the same pop-up.

  My operating system is windows vista.

  Then you know that the drive is bad. You will need to buy a compatible optical drive, Acer or an after-market reputable dealer. Since it is a laptop, you can buy the disc just for her. Yes, it's probably easy to replace. Refer to the manual of your computer or search for a manual on the Acer tech support site. MS - MVP - Elephant Boy computers - don't panic!

• Apple devices will not print not to 6700 Officejet, including the MacBook Pro and iPad

  I'm helping someone to implement their MacBook Pro and iPad to print wirelessly on their Officejet 6700. I have recently set them up with a new Apple Airport Extreme for their router. The printer connects to the wireless network. During the installation process of the printer is fine, that the MacBook can easily see the printer. The appropriate driver is installed. They also have a laptop Windows 7, which prints instanteously and has no problem whatsoever.

  When I try to print from the Mac, nothing prints. I open the print queue and it says 'Printing - a printer' and nothing ever comes of it. When you try to print from the iPad, you can see the printer and I select. However, after saying in print, said only dialog box: 'Connection to the printer' and he never - it just times out.

  Things I've tried:

  • Everything in this article which corresponds to Macs (10.8).
  • Reset the printing on Mac system.
  • Reset the printer to default settings.
  • The definition of the static IP address of the printer through the printer settings.
  • Setting the IP address of the printer via the Airport utility (after changing the automatic printer).
  • Restart the Mac after each attempt to remove the printer and adding again.
  • Using the official HP Officejet 6700 driver.
  • Use the Airprint driver.

  Other info:

  • Successfully, I can ping IP address of the printer from the MacBook Pro.
  • I can easily see the web page of configuration of the printer in the printer settings both by entering the IP address.
  • The printer is only about a month.
  • They bought this printer because the earlier had problems printing from all of their wireless devices. It is with a previous router in their ISP.

  At this point, I'm completely puzzled as to why the printer will print not these Apple devices. We have addressed all the issues that might be causing it: the network, the printer and the MacBook itself. I looked online and can't see any problem with people not being able to print to a wireless printer connected to an Airport Extreme. I saw some problems when the printer is connected via USB to an Airport Extreme, but this isn't our installation program.

  Any help would be greatly appreciated!

  Wow, I must admit, I had to do a lot of research to find something that you have not already tried! Thanks for your efforts so far @derick03 I accept the challenge of helping you get this to work.

  I have a vague feeling that the problem may have something to do with the router settings and to test my theory, I would like to try something for me.

  Please, open the preferences system, printing and scanning, click on the + symbol to add a printer, but this time, instead of the default tab, click the IP tab. Now let's add the printer using HP Jet Direct Protocol instead of the standard Hello.

  

  You can enter the IP address here, choose the HP Jet Direct and then select the printer driver, and then try to print. You will not be able to analyze this way, I just do this for diagnostic purposes. If you can print, it confirms the Hello Protocol is, and you will need to call Apple to make them turn on Hello, multicast and ensure that all the necessary ports are open.

  Not all wireless routers take load Hi or all features of Hello. Hello being the default method for the discovery of printers on a network, you must ensure that your wireless router supports Hello.

• HP Officejet 4500 wireless; Paperjam cleared. Device will not stop. "shutting down" message continues. Does not print even though watch print sent to the device.

  After I blacked out in a jam of paper for the printing device is not accept nor print more.  Tried to close for compensation but the message continues to show the message 'shutting down '.  How to return printer printing mode?

  Pull the power plug from the printer for a minute or two.

• Default Sound Device will not be selected

  I have a sound card on the motherboard nVidia HD. Sometimes I use my Bluetooth headset. To use the headset I go to the Audio tab in Bluetooth devices and connect to the headset.  Why won't the bluetooth headset stay connected?

  Thank you

  Hello

   

  Run the fixit proposed below and check:

  Bluetooth devices do not work correctly on a computer that is running Windows 7:

  http://support.Microsoft.com/kb/980396

   

  Also check out this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note: The article mentioned above is also applicable to Windows 7.

  I hope this helps!

• DVD - RW device will not be displayed.

  I logged in windows 7 Home premium (I used it for a while) and I press the button of the DVD player and it does not open

  Then I try to find it in the computer but not DVD player there is only the local disk (C :) that I look in Device Manager and it is not there.

  I have a HP Pavilion dv6 notebook PC.

  Any application that can solve this problem?

  Others in this forum you will probably offer suggestions.  I'll make one that is based on any of these work.

  DVD drives in laptops are common failure points.  They can be quite expensive (if possible) to replace.  You can buy an external DVD drive that is not much bigger than a DVD with a short cable that you can use instead.  they run about $20 and can be used on any computer.

• Device will not work on VLAN

  Using a switch sg300-52, I created two VLAN that share a port of access to the internet. All features original, added to the VLAN work correctly and I therefore believe that them VLANS are configured correctly. I added a new office and an old laptop to the VLAN and none worked. I could get my computer to work by activating the VLAN tagging in the network card. The laptop is 5 years old and it doesn't have such a setting in the network card. There are 2 other devices that share the same port with the laptop and both work properly. My conclusion is that the laptop does not support tagging VLAN. Y at - it a way to configure the switch to account for this?

  Hi Thomas,

  I wonder if something as simple as an access-list (or filtering) will do what you want to do.  The only problem is that devices which must limit must have set the parameters IP. (or statically defined through DHCP)

  Here is an example of a list of acess that I took of my SF300 - 48P, note that the access list (ACLs) must be attached to a switch for monitor port or filter packetings in the coming switch to an IP host port.  In other words, the acl check matches the model, in the case below on the IP addresses on the infiltration in the switch port.

  Since the new release of firmware version 1.1, we now able to paste in an accessible via telnet, SSH or console (CLI) command line interface when the switch is in Setup mode. You can get into configuration mode by typing the command "config."

  Changes in the CLI are immediately reflected in the GUI.  If you do not the following access list, the last command could be 'write' save the configuration in the memory of switches.

  Note: If you are not comfortable with the use of the CLI to GUI to create the following lists of access and ACE and link the ACL to a switch port.

  I have in the example below, established a list of access to two ports, ports fastethernet1 and gigabitethernet1.

  Please note: ACL uses subnet reverse masking, which normally means, you must specify a specific IP host by the next note;

  192.168.20.5 255.255.255.255 with market back, this mask must be set as 192.168.20.5 0.0.0.0

  As a packet enters a port of a host IP switch, the access list is inspected from top to bottom, as soon as a match is found, the access list as you exit.  There is normally an implicit deny at the end of an access list, that's why my last statement in two access lists should allow any source IP address goes to any other destination IP wise the IP host might not get to the router WAN and Internet.

  The first IP address in the list below is the source IP and the mask and the second IP address is the destination IP address and the mask.

  room200 extended IP access list

  IP 192.168.20.62 enable 0.0.0.0 192.168.20.100 0.0.0.0

  IP 192.168.20.62 enable 0.0.0.0 192.168.20.63 0.0.0.0

  refuse the 192.168.20.62 ip 0.0.0.0 192.168.20.0 0.0.0.255

  allow an ip

  output

  The following applies to the access list for a switch port

  interface fastethernet1

  Service-acl input room200

  output

  room225 extended IP access list

  IP 192.168.20.63 enable 0.0.0.0 192.168.20.100 0.0.0.0

  IP 192.168.20.63 enable 0.0.0.0 192.168.20.62 0.0.0.0

  refuse the 192.168.20.63 ip 0.0.0.0 192.168.20.0 0.0.0.255

  allow an ip

  output

  The following applies to the access list for a switch port

  interface gigabitethernet1

  Service-acl input room225

  output

  It's the best way to contral access in this vlan and the filter will run at wire speed.

  Best regards, Dave