Devices and printers empty

Similar Questions

• "Devices and printers" is empty, crashes, empty

  Hi all:

  Sincerely, I apologize if my problem has been resolved already.  As the title says, when I opened Orb-> devices and printers he always appears empty. I tried every associated bluetooth post, including the upgrade of drivers, check the BT services (both) are running, the suggestion to use the script from cmd registry IE8 etc.  Virtually all positions were point to BT, so I disabled, uninstalled all drivers, reactive, re-installed, etc.. At each step, I tried the devices and printers with the same results.

  Adding a few details:

  1. My printers installed works perfectly
  2. My scanner installed and works perfectly
  3. 2 phones with BT installed work perfectly, including: make a call, transfer files (both directions), listen / control the music player, navigation via a modem BT internet
  4. As with the devices and printers, printers and devices-> devices Bluetooth is also empty (even using BT with success)
  5. This is my 4th W7HP Installer but my first with BT others have no problems in this area to all the
  6. It is a brand new Asus 1201N, built-in BT, all the drivers have been pre-installed, model Broadcom BT, 2, 25 GB HD, Atom 330.
  7. Printers and drivers was empty of the first point in the course of which the BONE has been configured after first power upward.
  8. All my machines have a C: for the operating system and a separate D: partition called USERDATA. Never had a problem with it in Vista or W7. Very convenient for restoration (see below).

  I'M PULLING MY HAIR looking for a solution without success.  I'm using Paragon Disk Backup so I don't mind my registry hacking or other configs and I am brave enough (crazy hardy?) to try almost all the suggestions, because I can always do a full restore of the OS Partition.

  Appreciate any comment. Please, no 'check your BT services. Been there, done that.

  Kind regards
  The f

  I just tried this and this FIX works...

  Click the Start button, type "services" in the search programs and files. This will display a list in the menu, select Services. "This should open a list of local services on your system..., Find ' Bluetooth Service" and make sure that it has begun, click right and put on 'automatic' (mine was already fixed), select 'Bluetooth Support Service' and start, set to automatic (mine was set to manual).

  Really weird. Joel, can you please explain.

  Kind regards

  Rakesh

• Devices and Printers dialog box empty

  When I opened my "Devices and printers" dialog box, it is empty; nothing shows, and registration of the order of the day says "0 items.

  Printers appeared in the devices dialog box and printers and devices box earlier, but now are gone from the dialog box.  However, they are still in the system, everything seems to work.  The problem of trying to define the preferences for the devices and printers, because they cannot be seen or accessed.

  Anyone got ideas on how get the devices and printers will appear again?

  Devices and printers will show a device when you set up multiple printers for the same device.   There is a passage outwards the menu to access all the other printers on the device.    Use teams of spooler UI, printmanagement.msc to display all local printers on Pro and Ultimate.

  The old printers folder can be launched if you run Home versions.

  Open a command prompt and paste this in.

  Start shell:::{26EE0668-A00A-44D7-9371-BEB064C98683}\0\::{2227A280-3AEA-1069-A2DE-08002B30309D}

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Devices and printers is empty

  Windows 7 Edition Home Premium.

  I read all the advice given previously, but still do not see anything in devices and printers.

  Things arise in Mode safe mode but not in cleaning Mode.

  Bluetooth and printer spool show as automatic.

  I tried scannow but who told me only it were corrupt and referred me to the CBS logs that I can not open, not even the command prompt - I enter the string as shown on https://support.microsoft.com/en-us/kb/928228/en-us and nothing happens, not even an error msg.

  I did a check of memory, I've updated the USB driver which was presented as a problem in safe mode and nothing has worked.

  Help, please

  TIA

  Hi Catherine,

  Thanks for the reply.

  To help solve your problem better, could you give us the following information?

  1. You have another user account on your computer? If yes then I suggest you log on to the other user account and check if you are able to detect anything in devices and printers.

  If not, then you can see the article to help next Microsoft to create a new user account and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  I hope this information helps, please get back to us for further support on Windows. We will be happy to help you.

  Thank you.

• All shot, "devices and printers" is empty

  My computer has been updated from Windows XP to Windows 7 a month ago and is working fine.  I have a Brother printer connected to the computer with the cable.  Today, I added another printer that is wireless; I have printed successfully on this printer.  The problem: all of a sudden I can print is no longer my computer to brother, which is the main I want to use, and which I have been using all along.  When I installed the wireless printer, he became defined as the default value, so I thought that maybe it would be useful that I've changed the brother to the default - it's the one I use most often.  However, when I went to "Devices and printers", he appeared as foul, and I have so no way to change the default, as far as I can tell.

  I skimmed the discussion, and it seems that a lot of people have this problem of "Devices and printers" being emply - but I have not found proof of a solution that helps!  I think that there is a kind of simple solution to this point - it clearly, in my case, has something to do with the addition of another printer.  I tried the simple solution to restart the computer and the printer - no change.  I also tried to reinstall the brother driving system.

  If anyone has solutions they can offer in a simple language, I appreciate it!  I am quite advanced in my computer knowledge.

  It looks like something has become corrupted when the wireless printer has been installed.

  I would restore the system to a restore point before installing the wireless.

  http://www.SevenForums.com/tutorials/700-system-restore.html

  You can also try a verification of the file system.

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

• Windows folder instead of the Officejet 6500 icon icon has more E710n in devices and printers

  Can someone help me get the OfficeJet 6500 has more e710n printer to display correctly in devices and Printers icon?

  I have recently reinstalled Windows 8.1.  However, when I installed my printer, the printer icon in devices and printers, I get a generic Windows yellow folder icon.  The Fax icon is OK, just the printer icon is wrong.

  

  If I double click the icon, I get a blank page with a message near the top of the page saying: 'information updates are available on your device.  Click here to download or learn more. "If I click on the notice, a drop down menu appears with 'Download update of information' or 'Learn' more.  If I choose Update downloaded information, a new printer window appears which is often empty except for a message in the center of the window that says "no task is available on this page" to learn the most fair option gives me info on the update of drivers.

  The icon of the printer in the start menu is fine.

  I used HP Print and Scan Doctor uninstall and reinstall my printer, but it did not help.  The program finds a problem with the printer driver and the fixed, but that has not changed the icon either.

  I'm running Windows 8.1 Pro 64-bit fully up to date and used the full version of the HP Installer for the printer (not the basic version) and HP Print and Scan v4.6 doctor.

  Hello

  Try following these steps and let me know if that can help you:

  1. In the control panel select network and internet, and open network and sharing Center.
  2. Click on change advanced sharing Center.
  3. Make sure the network discovery is trned on but uncheck "turn on automatic configuration of network connected devices.
  4. Devices and printer the printer right click and select remove device, repeat the for the Fax icon.
     Note: If no such option exists for the printer, follow the next steps.
  5. Right-click in the background area and select the Mahager device.
  6. Delete any instance of the printer of imaging devices, Print queues, multifunction, printers, other devices adapters (if such exists).
  7. Once you have completed the printer should no longer appear under devices and printers...
  8. Open the software HP Officejet 6500 E710, select Connect a new printer and check any differnce.

  Hope that helps,

  Shlomi

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• I'm unable to view devices and printers. Green bar moves slowly on screen, but does not show anything

  When you try to solve a problem, discovered that Bluetooth 'printers and devices' in the control rest empty.  A green line moves slowly on the screen, but even after a long break, none of my devices appear.

  64 bit W7

  Hello

  1. If you are unable to print, what is the exact error message?

  2. are you aware of any changes made to the computer, before the show?

  3. What is the problem you are having with Bluetooth?

  Method 1:

  Consult the following link:

  Window devices and printers stops responding (hangs) after you turn off the Bluetooth Support service in Windows 7 or in Windows Server 2008 R2

  http://support.Microsoft.com/kb/2486635

  Method 2:

  An analysis of auditor of system files on your computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  It will be useful.

• When I try to view my devices to Control Panel/hardware and Sound/devices and printers, he treats forever and does not show the devices.

  When I try to view my devices to Control Panel/hardware and Sound/devices and printers.  It treats forever and does not show the devices.  I need help!

  
  Original title: device and Printers window
  There could be various reasons why the window devices and printers stalls. All the control points are listed here.
  Fix devices and printers folder is completely empty in Windows 7

• Windows devices and printers, no work

  When I click on the Start button, then click on devices and printers a blank window opens and a slo-o-o-seniors green progress bar makes its way across the top of the window. But it stops just before the end and stayed there so the window is never completed. This isn't a window I regularly so I don't know when this started. Any ideas please?

  This can happen if some services (spooler, bluetooth etc) are not started correctly. See this article for detailed troubleshooting steps. One of the measures listed should help.

  Fix devices and printers folder is completely empty in Windows 7:
  http://www.Winhelponline.com/blog/fix-devices-and-printers-completely-empty-Windows-7/

• OfficeJet 5746: Why my printer does not record twice in devices and printers (direction)?

  My HP Officejet 5743 presents itself as the default printer.  Also the appearance is HP649F6A (series HP Officejet 5740).  Why it appears twice with different BOMs?  Will it affect anything if I remove it?

  Hi @Metal1,

  Thanks for joining the Forums of HP Support with your request.

  I understand that you use a HP Officejet 5743 e-all-in-one printer with a Windows 10 PC and printer appears twice in the file devices and printers in Windows, with slightly different names. I would like to help with that.

  I was looking into this and found that there is a solution, concerning Direct eventually picked up by your PC if directly on wireless wireless signal the printer is 'On '.  Try the post with the answer of the @vthapa by clicking here.

  Please let me know if that solves the problem, or if you need assistance.

• Photosmart HP 7520: 2 printers appear on devices and printers

  I'm not technical so need help to understand why when I look in the control panel under devices and printers 2 printers appear.  We're the printer default HP Photosmart 7520 series (network) and the other is HP96DC72 (Hp Photosmart 7520 series).  I've included a snapshort of the properties of the two printers appears under devices and printers.  I combined 3 pictures into one.  Point 1: shows the properties under the default printer with the menu drop down list 2 printers, reason why two of them?  Point 2: shows the properties for the second (HP96DC72) indicating that it is a printer web services.  Point 3: displays the properties of the default printer.

  Can someone explain what the hell this is all about?  I have a printer, but defined it in my router as a printer for printing, although I him have not used for this purpose again.

  Any comments will be appreciated.

  Thank you... Ralph

  

  Hello

  Those are two logical printers, and you can use both:

  1. the first condition is connected to your WiFi network normally.

  2. the other is directly connected, you can print even when your network down.

  Kind regards.

• Webcam is displayed in devices and printers, but can not get turned on?

  Original title: webcam 270
  Webcam is displayed in devices and printers, but can not get turned on?

  Hello

  ·         What operating system do you use?

  ·         You're using a built-in or external webcam?

  ·         What is the brand and model of the webcam?

  ·         Were there recent changes made on the computer before the show?

  Method 1:

  I suggest you to check in Device Manager if you can detect the webcam. See the link below to open the Device Manager in windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

   

  Method 2:

  Try to update the drivers for the webcam from the manufacturing site and check if it works:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Use the hardware and devices Troubleshooter to fix the problem.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 4:

  I also suggest that you run the Microsoft fixit tool and check if that helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• Computer listed under devices and printers in Windows 7

  Hi all

  I was wondering, is your computer itself supposed to be listed under devices in the peripheral zone and printer to Windows 7? Or is it a driver problem.

  Thank you

  ryguy2008

  It's normal.

  In addition, only connected external devices or devices that can be removed will appear in devices and printers.

• lost my ability to select scan to file when I select the devices and printers to my HP computer.

  Have Hp 8600 pro officesjet. Used to be able to select devices and printers and get a window w/scan to file or computer option, select it to?

  What should I do to get it back?

  Have HP laptop w/windows 7 pro, thanks, G

  For return options have been lost, you need to uninstall and reinstall using the latest drivers from HP. This should retrieve all of your options.

  @geojet click here for the correct drivers for your printer.

  @Kayren click here for the correct drivers for your printer.

  Let me know what happens.