Devices bluetooth audio seen paired, but does not connect unless that selected

iPhone running 9.3.3

Question is that devices audio bluetooth paired when turned on bluetooth settings will appear on the page, but they do not send audio to them automatically. They are listed under "My devices" but show "not connected". I can select the device in the menu settings and plays sounds as soon as I touch the name of the speaker, but not until I do. Same problem in the car too. Appears on the right, but shows not connected until I have the touch.

I didn't open the bluetooth settings to on any prior iPhone iOS just selected a camera already attached before. I deleted and repaired, switched bluetooth, reboot the phone, soft reset the phone and even a network reset.

Thank you.

Try control centre. Swipe up from the Home button

This screenshot of my iPad, it's the same on iPhone

Tags: iPhone

Similar Questions

  • Headset Bluetooth paired, but does not connect.

    I recently bought a pair of headphones Bluetooth (BT) to replace the ones I currently have. In any case, I have them connected to my phone, but now I want to use it on my laptop. It does not connect to it. He was just trying to connect to my phone. I even turned off bt on my phone, but the headphones does not connect to my laptop. I tried to go to the playback etc... devices and clicking on the 'connect' option, but it does nothing. Everything seems to work fine, except that! Help, please.

    Hi Tom,

    Please contact Microsoft Community. I understand that you have a problem with the Bluetooth Headset connection. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

    To better understand the issue, let me know if you face any problem when connecting the Bluetooth headphones on another computer in Windows 7?

    This problem might have occurred because of these reasons:
    1. wrong settings.
    2 damaged material.

    Try the steps listed here and see if it helps:

    Method 1:
    I suggest you to run the corner hardware store to ensure that basic material settings are set correctly.

    Open the hardware and devices Troubleshooter http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2:

    I suggest to return the item and make sure that the Bluetooth settings are set correctly.

    Add a Bluetooth device to your compatible computer device http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

    See these articles for more information:

    Change settings for a Bluetooth compatible device
    http://Windows.Microsoft.com/en-us/Windows/change-Bluetooth-device-settings#1TC=Windows-7

    Add a Bluetooth device or other wireless or network device: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

    Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

  • Bluetooth device is paired but does not connect

    Hello

    I have a DELL Inspiron 15 laptop and I have windows as operating system 8.1. After the update to windows 8.1 that I am unable to connect to a Bluetooth device, although getting paired do not connect. I tried and find all the solutions on the service check and update the drivers and everything is in sync, but I am still unable to connect.

    Hi Harshank,

    Thanks for posting your query on the Microsoft Community.

    This issue may arise, when the Bluetooth drivers are not updated.

    Please provide the slot details, to help you best.

    (1) have you installed the latest drivers for Bluetooth?

    (2) what device you are trying to connect with your PC via Bluetooth?

    I suggest you to download the latest Bluetooth drivers on the manufacturer's Web site and check if it helps.

    See the link below to download the latest version of Bluetooth driver:

    http://www.Dell.com/support/article/us/en/19/SLN113225/en

    If the problem persists, ask Op to install the driver in compatibility mode and check.

    http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

    It can be useful, we meet with the status of your question. We will be happy to help you.

  • Satelitte L50-B-1DZ: BT is paired but does not connect to the android device

    I just bought a new toshiba brand laptop with win 8.1
    Satelitte L50-B-1DZ I got bluetooth on
    And have even added and paired 3 devices to this Sucsesfully.
    Tab after assend 300Y android android phone and a samsun Music Center.

    The bluetooth connects very well with the Music Center.
    But not with the phone android or tab
    It will not just connect, I checked the phone and the tab are visible etc.

    I hear a lot of rumors of 8.1 problems
    With drivers who have improved 8 etc.
    I managed to do a check of device driver
    Manager and he said the best up to date
    Are installed.

    But I want to be playing so deep in this
    Bought a brand new laptop with windows 8.1
    Is it worth to take back to pc world a tell / show them
    The pronlem for them to market.
    Because they will be more IT his life than me.
    Does anyone else have this problem?
    Is it something android?
    I am due a new phone soon I could poss
    Get a windows a next if this will connect?

    Thanks nikki

    Hello

    Check it please my thread on the BT feature. I tested it with my phone android mobile.

    Please test the functionality of BT send some files in both sense, even if the mobile phone is crystallized in Win as not connected.

  • I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

    I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

    Hello

    I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:

    http://support.Microsoft.com/kb/310123

    It will be useful.

  • Unable to connect mifi 4510 hotspot for PC. Wireless see peripheral but does not connect... is to expire.

    mifi4510L

    Unable to connect mifi 4510 hotspot for PC. Meet operational requirements throughout the system. Using XP SP3. Wireless see peripheral but does not connect... is to expire. No msg error in Event Viewer.

    THX

    Hello

    I suggest you to try the steps below and check if it helps.

    Method 1: Try running the Fixit tool from the link below.

    Hardware devices do not work or are not detected in Windows:
    http://support.Microsoft.com/GP/hardware_device_problems

    Method 2: Try also to update the latest drivers for your device wireless using the link below.

    How to manage devices in Windows XP:

    http://support.Microsoft.com/kb/283658

    Hope this information is useful.

  • I had to use restore on itunes on my ipod and now it shows on my list of computer peripherals, but does not connect with itunes.

    I had to use restore on itunes on my ipod and now it shows on my list of computer peripherals, but does not connect with itunes.

    Original title: ipod

    You may be better to ask on the Apple Support Forum - https://discussions.apple.com/thread/1577894?start=0&tstart=0 (example)

    See also - http://support.apple.com/kb/TS1363

    It will be useful.

  • My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

    I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

    I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

    My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

    Hello:

    If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

    Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

    If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

    Paul

  • OfficeJet pro 8600 more connects wireless, but does not connect to Internet

    I use Windows 7.  The free thread is ideal for printing, but I do not understand why the web

    does not connect.

    Hi susea;

    Hope you are doing well and I'm sorry that you are having problems.

    Jean-Marie this tool;  http://support.HP.com/us-en/document/c02037530

    If that didn't help then share what router you're using, please indicate brand and model? I'll offer to make sure that your router is updated with the most recent firmware, also I personally always use Google's DNS servers. Some servers DNS provided by your ISP (Internet service Provider)

    You can change this setting by going to do the following:

    Press the Win key on your keyboard.

    1. Type Ncpa.cpl (this will take you to the network connections)
    2. Select your wireless connection
    3. You will see a screen on the botton, you will see a button called properties, near the left button
    4. On the Properties menu go to IpV4 (if you don't see scroll down) double-click to open
    5. In this screen, you will see (get IP address automatically) slot that you wil see the Obtain DNS server address automatically select this option
    6. Type 8.8.8.8 and 8.8.4.4 airfield

    I will also choose a static IP address, and this can be done here as well.

  • Receiving wireless audio/video from Sony does not connect to my iMac

    Wireless Sony AV receiver STR DN 840 does not connect to my iMac so I can play iTunes it

    Which iMac do you have?

    To view a video from your Mac to a TV high definition - Support Apple AirPlay

  • CP1518ni on Win7 64 bit does not print unless that ' ignore the ' is on

    I get the message "replace supplies" and the printer does not print unless the 'out' substitution is turned on. I replaced the ink once and then got the message "replace supplies" in the following days.  I installed HPPDU which refers to the series CP1510 PCL6. the diagnostic screen says everything is fine. I also downloaded the 20100616 update.  I noticed that the 'solution' ToolboxFX does not work with Win 7.

    What Miss me?  Should I continue printing under "replace" until all four cartridges run out completely, and then trust that the printer will work without the substitution on the future cartridges? Thanks for your help on this.

    Bkaytee

    Yes, it is possible that drive e-lable contact has malfuncioned.  I would say that your options is as follows:

    A. keep the game of "substitute for" will continue to work and should cause no issue. (It doesn't stop that monitoring of level of supply of Toner, then when degrades the quality of printing, then a new toner must be purchased.)

    B. contact HP support for service possible. 1-800-474-6836 1-800-HP-Invent

    Thank you

  • 6 s iPhone Bluetooth will pair with El Capitan Mac but does not connect

    My employers very kindly gave me a brand new MacBook Pro running the most recent version (10.11.4) of Mac OS X.  What finish set up I need to pair my iPhone staff 6 (running iOS 9.3.1) to the computer I want to use MacID to secure my computer when I'm away from him.  While the phone would pair (pairing being initiated by the Mac) it would be briefly apply status 'connected' before going to "not connected".  When I then tried to establish a connection, I received the following message on the iPhone:

    Connection failure

    'MacBook Pro' is not supported

    and the only option to close this dialog box click the device forget .

    I therefore looked on my personal Mac which had previously been paired with the phone to find that he was is no longer listed in the devices Bluetooth, but when I looked in the settings for MacID running on my Mac it says "Looking for iPhone 6 s.  I tried to re-pair 6s iPhone to my personal machine and had the same results.  When I called in my TI guru we tried with his iPhone 6 (also installed 9.3.1) and had the same results.  As it's been a few months since I used MacID on my computer that I don't know when the link has been broken - after an update iOS or OS X update.  Bluetooth linking to my Apple Watch still works perfectly.  I was unable to try this out with any other Mac, I was looking for one with an older version of Mac OS X.

    Everyone is aware of this problem or have an idea for a fix?

    TIA

    An iPhone will not pair Bluetooth with a computer (Mac or Windows) for one use other than personal hotspot and it will only do that if the carrier is supported. However, there are a number of things will be using Bluetooth between the computer and the iPhone where the devices are NOT matched. More information in Bluetooth: why can not connect my iPhone or iPad with another iOS device or my computer?

    The following link for MacID support site has instructions on how to do the installation. It requires Bluetooth to be turned on in the computer and the iPhone, but the rest of the configuration/connection is done inside the MacID app on each device, not normal Bluetooth pairing as follows: http://macid.co/help/?c=Setup & sc = Pairing % 20A % 20device

  • Blue Tooth headset is paired, but does not work

    I have the Miikey helmet pace wireless and HP Windows 7 laptop that has Blue Tooth built in.  When I pair the headset, blue tooth sees and pairs, but there is an error.  When I use the function of trouble shoot it says I need to install a driver for the headset.  I don't remember having to do this before (Windows XP with an external blue tooth and the dongle).  I tried to contact the headset stand and unresponsive.  I googled drivers for the headset and can't find them on the site of headphones or anywhere else.  Specifications of the helmet to say it supports Bluetooth 2.0 and higher.  Blue tooth I have is 4.0.

    Any suggestions?

    Thank you

    RK

    Just because it is up to date does not mean that it is not corrupt.  Re-install.

    Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  • Device will scan or copy, but does not print a document

    SCART settings will not evoke the settings for the print options, only the copy options?

    Hello

    Contact the manufacturer of your printer for a manual on how to use your printer and whether it is compatible with vista

    If it is compatible with vista

    ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

    You can also track information to try to solve your problems of printer below

    read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

    Solve printer problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    and read this microsoft tutorial too

    Introduction

    This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

    How to use this tutorial

    For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  • iPhone connects to the wifi but does not connect to internet

    I have an iPhone running iOS 9.3.2 6s (last updated).

    The phone connects to the wifi network, but even if it's to show the signal strength is good, the phone does not charge any internet content (weather, FaceBook, email, etc.).  If I disconnect WiFi and use the data, it works very well.  We have no problem connecting to the computer or a smart TV network wifi and internet connection.

    This also happens with my daughter 5s iPhone and iPad for my son.

    Sometimes it will work fine on wifi, then a little while later I can't get anything to load. And it can be like right now when I'm at home alone is not as if there's a big load on our wifi.

    We have high-speed internet by cable (25 MB/s download speed) and a router Lynksys EA3500.  Encryption is set to WPA (not WEP).

    I tried to go into my phone settings and reset the network.  Always problems.

    It's really frustrating because you eventually switch to our mobile data and use it instead of our data ' wifi '.  And then to go on our data on our phone plan

    Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

    (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

    (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) backup and restore the device using iTunes (ask for more details if you wish).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple Store for the evaluation of the material.

    Council: https://discussions.apple.com/docs/DOC-9892

Maybe you are looking for