Devices not working after updates Windows

Similar Questions

• Stream HP X 360: touchscreen does not work after updating windows on HP Stream 10 x 360

  Hello

  I have a problem with my HP Jet x 360 after doing the update of windows 10. Seems that there are no drivers for touch screen in windows 10 again, even a generic driver.

  I checked the Device Manager and found 6 Uknown devices with no driver.

  I installed the HP support Assistant, but found no driver. Windows Update No.

  Under Human Interface devices group I can't see the touch screen and in the settings app is also absent.

  I also checked the diagnostic tool in the BIOS, but the touch screen works very well.

  Please help me!

  Thanks four your help.

  You can correct the touchsreen windows version 8.1 of 'Serial IO driver without connected sleep Support Intel'. As someone discovered in this treat: http://h30434.www3.hp.com/t5/Notebook-Hardware/touch-screen-on-stream-11-x360-not-working-after-windows-10/td-p/5188892

  You can find the driver here under pilot-Graphis-Intel: http://support.hp.com/us-en/drivers/selfservice/HP-Stream-x360-Convertible-PC/7439377/model/7579371#Z7_3054ICK0KGTE30AQO5O3KA30R1

  However this does rest not correct the prolbem completely! The Touschreen works but not the accelorometer. I hope HP suport can provide some real suport at some point and release drivers that make accelometer works in windows 10.

• Inspiron 15R SE 7520 video card does not work after update Windows 8.1

  The internal graphics are Intel HD 4000 and the graphics card is a Radeon HD M 7730. After update for Windows 8.1 almost everything worked, except that it only uses the integrated Intel graphics card. Now, the resolution is not right and parts of the interface Windows look rather mediocre in comparison.

  What I tried:

  • Uninstalling the video card drivers
  • Reinstall the drivers for the video card in Dell
  • Install the latest beta drivers directly on the AMD website
  • Disabling the integrated Intel graphics card
  • Uninstall the Intel integrated graphics card

  So now what?

  Hi all

  After a lot of Googling, got this Dell website which has 8.1 Windows drivers for Inspiron 15R 7520 SE:

  http://FTP.Dell.com/published/pages/Inspiron-15R-se-7520.html#TopSolutions

  After having installed the drivers from AMD & Intel HD4000 for Win8.1 on the site above, blurry of the screen disappeared and catalyst works again!

  Please spread this link autour!  Very weird representatives Dell did not provide this link. Their advice to uninstall drivers / stop windows update does not help.

• Beats Audio DOES not work after update windows 10.

  Beats Audio does not appear in WIndows after upgrading Windows 10. The icon is missing from the system tray, control panel and in the search bar. Cannot find the drivers in the HP store.

  Guys, please help. The audio is not good without configuration Audio Beat.

  Thank you

  Jain darshan.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• ASUS laptop computer: touch screen does not work after update of windows 10

  My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

  Hello

  Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

  Kind regards.

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  This may be caused by the Tab Mix Plus extension

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to install the latest Dev version of Tab Mix more if you use this extension.

  See the sticky on the forum of Tab Mix Plus:

  • http://tmp.garyr.NET/forum/viewforum.php?f=3
  • http://tmp.garyr.NET/forum/viewtopic.php?f=3 & t = 15740

• autorotation does not work after update 8, 1 wind - W510

  

  I have a tablet with docking station and 32 GB w510

  the autorotation feature does not work after update to 8.1 windows. the lock button does not work and there is no option for the autorotation lock in the settings.

  I ve installed the latest driver form acer download page and Windows update.

  then I tried a clean install of windows 8 and yet once installed can I 8.1 and it still does not work.

  What can I do?

  PS the camera does not work

  

  -solution for me! ----

  I don't know what happened, but I'll tell you what I did not last:

  I have the European version of Windows 8.1 N(without Media Feature Pack)

  1. reinstalled microsoft silverlight.
  2. search for update---> silverlight update available!---> installed!
  3. reset
  4. installed the 'Media Feature Pack for N and KN from Windows 8.1 versions"from here: http://www.microsoft.com/en-us/download/details.aspx?id=40744
  5. reset
  6. Search again---> new available updates updates---> installed
  7. reset!

  now, camera, autorotation and all the apps work for me. I hope this will help you

  Best regards

• NDAS services stopped and do not work after installing Windows 8

  Ladies and gentlemen,

  My Services of NDAS stopped and do not work after installing Windows 8. This is necessary to run my SUNGOO LAN hard drive.

  Does sb know what to do?

  Best regards, Rolf

  Hello

  If I understand correctly the NDAS (Network Direct Attached Storage) service has stopped working after the installation of Windows 8. Is this correct?

  Please provide additional information for a better understanding of the issue.

  1 are you faced with the question of the NDAS service on the computer having the hard disk SUNGOO?

  2. how many computers using the hard disk on LAN?

  Specify the computers with Windows 8.

  3 are the computers in a home group?

  Please post the information requested to receive specific troubleshooting steps.

  Other links

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/NDAs-error-wont-see-drive-after-Win7-install/a004b2a3-9dd4-48a1-9ce7-c289931ba17b

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  I hope this helps.

• Certain things does not work after update MacOS Sierra on my Macbook Air 13 "Late 2010

  Drag between apps full screen, Mission Control and expose App are not working after update MacOS Sierra on my Macbook Air 13 '' end 2010. The problem because my macbook are not compatible with the current Mac OS or something else?

  Go to System Preferences > Trackpad and turn off and then on the ' shot between apps full screen» It should then work.

• My front camera not working after update to ios 9 (Iphone 5) Please help me to solve this

  Hello

  My front camera of the iphone 5 does not work after update to ios 9, please help?

  I have the same problem on my 5s.  Just after the upgrade to 9.3 camera is black.

  Work, rear camera, but the camera application usually freezes before let me pass.  Sometimes a warning icon yellow appear in enforcement camera, touch, he says the flash does not work for the unit to cool down.  No change after a restore is complete.  Other applications of the camera have the same problem.

  iPhone 5, iOs 9.3

• Dual booting of Z3 tone does not work after update Marshmallow

  Dual booting of Z3 tone does not work after update Marshmallow? Worked with normal lollipop

  I don't think he has a...

• Gyro does not work after update 6 Android on z3 D6633 double

  Gyro does not work after update of the marshmallow on Xperia Z3duos D6633

  Issue edited by Rickard

  @dipuvellara

  Could you try to restart in safe mode and test again?

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.