Devices on all my iCloud preferences says "this device can be used to receive codes of audit ID Apple." How can I change this if at least one, if not several, can receive the verification code?
Devices on all my iCloud preferences says "this device can be used to receive codes of audit ID Apple." How can I change this if at least one, if not several, can receive the verification code?
Try to go here and see if you can add them to your Apple ID.
Tags: iCloud
Similar Questions
-
I'm trying to get a software update IOS 9.3 as reminded me. He repeated that "impossible because you are no longer connected to the internet while I am on the internet. Please help me understand why. I did it many times, but it's really annoying
The iOS 9.3 update was pulled for iPhone 5s and older iPhones because of activation problems. He will be unavailable for the next few days.
-
Been updated my profile add my personal e-mail to Adobe to recover. I received the verification email, but there is now no room in the form of adobe to stick it to. What I can / Adobe done to correct?
The forum software... below might help Adobe rents
User manual for the community of Adobe (forums) https://forums.adobe.com/docs/DOC-4714
-or http://docs.jivesoftware.com/jive/7.0/community_user/index.jsp
-
I used my iMac as a hard drive backup to my macbook once. Now when I update to El Capitan he says that it cannot be updated due to being of a backup. How do I change the drive mode so I can update?
If you use your iMac as a backup to disk using Time Machine look for a folder called Backups.backupdb.
It's what keeps you upgraded your operating system, you must remove it.
Copy everything first if you are on a different drive. It would be wise to create a backup of the iMac on another drive also.
Check system preferences > Time Machine and make sure that the iMac is not selected as the Time Machine drive.
-
Wireless devices can see the wireless network but not connect
Can someone please help? I have a WRT54GS v2. My wired computer accesses the Net fine, and I can see MAC address, IP address, DNS, subnet mask, default gateway in the navigation of the linksys software. The devices can see the network with strong bars but can't connect.
Help!
Thank you
Yes, I tried all of these suggestions before posting and thank you for the reply. I even called Comcast, my cable provider, in despair attempt to resolve. Of course, they were no help, but it didn't end up being a problem, with what they should have helped me.
By simple trial and error for several hours, I discovered that the domain name required to be filled in the first Panel of the router Linksys software. The domain name resulted in the status panel but needed to be included in the initial group. The forums I read had informed that some cable companies require the name of the computer and the domain name is filled and others not. Obviously, if Comcast domain name must be filled out, but not the name of the computer.
-
Device appears to be offline. Restarting the device can solve the problem.
With Flash Builder 4.7 and Flex SDK 4.6 with AIR SDK 3.6 after my Google Nexus 10 updated to Android 4.2.2 I now get this error when you attempt to start the unit to Flash Builder:
Device appears to be offline. Restarting the device can solve the problem.
He showed not installed Adobe AIR so I uninstalled the device and which does not solve anything. I've tried everything. Restart the device. Restart Flash Builder. Restart Windows. Nothing helps.
Someone knows how to fix this?
Same boat,
of
\android-sdk\platform-tools Copy the files of theses: adb.exe, AdbWinApi.dll, AdbWinUsbApi.dll, aapt.exe and dx.jar (under lib rep)
and paste into
\lib\android\bin To check, type cmd
$ adb.exe version, you should have instead of 1.0.26 1.0.31
This is!
-
I have problems with xp and that you want to run sfc, but I only sp2 disk so computer keeps asking for me to insert the disc of sp3. So I want to uninstall sp3, doing a sfc then reinstall sp3. Something happened to the installation files for trying ways to support microsoft, but this does not work. In the Add/Remove, it shows updates but shows not all updates. It shows as ' 09. It is not listed as sp3 but it sp3 has a kb id #? BTW, I regularly clean the registry I've corrupted the registry so that it will be impossible to fix
nebbish21,
Thanks for posting on the Microsoft Answers forum. SP3 is KB936929. Here is an article that deals with removing SP3: http://support.microsoft.com/kb/950249With regard to the registry cleaner all what I can say is, use at your own risk! Of many registry cleaners can do more harm than good. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Why W3i, LLc, llies when he says that you can uninstall the software at any time?
I just wanted to watch some free transmission of game of football from a free source (tv Pública) began indicating that I don't have the software install. - lies - I've seen before.
Then, for reasons of time, I agreed to download and install - but by the time wherever I downloaded all the conditions, the game was over. So I decided to uninstall it, that
seems to work only dialog box, does not provide a button 'Start' final really uninstall. All ask is if you want to make changes, the software on this computer, if you answer ' "nothing does not change - if you answer 'Yes' W3i, LLc, install the program again.
I don't like not for microsoft products anymore. They have become too lax in the love of the powerful dollar, in selecting or approving add on third or fourth party software on any operating system.
Especially from there else I wouldn't trust microsoft as a signature certificate legitimate lies marketed in order to obtain the resale and then the data flow information.
I watch the front game without the need to install anyhting as a condition to see. It is call 'public tv' and it is a public domain open access.
(tv Pública)
If microsoft should be able to approve these pirates of the confidence of the public, they should be liable as accomplices of the whole shabang and the same intrusive and harmful standards. Unless of course, that Micrfosoft put in place monitoring worth team something else than just stamp rubber in order to maintain and check these people who install, things that we ask not for, the hold for estelle during use and then slow down and crash the system.
I would like to see the answer in 72 hours, to see what kiind of fix will be proposed to prevent these uninstalable software to maintain a status unremovable.
It's the same that some commits a crime, and rubber stamping an endorsement by someone else, some may think that this is acceptable.
Well, is 72 hours, and if I'm not able to remove the W3i, LLc installer from my pc. I post on the net and then go to the legal circuit.
Sincerely
Ricardo Becker
E-mail address is removed from the privacy *.
Hello
(1) do you have made no changes before this problem?
Follow the steps mentioned below and check if the problem still persists.
Method 1: Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
Method 2: Microsoft Safety Scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
See also the links below that can help you. Troubleshoot installing or uninstalling programs
http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs
Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Hope this information helps.
-
Hello
When starting my laptop (Windows vista), pop - up warning message indicating c:\program can affect the function of other applications, by naming to c:\prgram1 will solve the problem options: would you like it to remane, or ignore it.
Can you help me
Thank you
Original title: Cprogram
Hello
Method 1:
I recommend you put the computer to boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Hope this information is useful.
-
Email verification and Code that I do not receive the verification email
When I get the message that says I need to verify my identity by receiving an email from the team at Microsoft, I didn't send it to me. I checked my email is correct. Is there another way to verify this account without having to create a new e-mail account?
As the account of emissions contain private information that can be shared in a public forum, please use the online form below. They are the only ones who have access to your account information, we simply don't have.
Account of all the partners must now wonder online by using the Microsoft online form
Select the error you must help with and fill in the information requested on the next page. You must be connected to a Microsoft account to access the form.If you are unable to access your main account, you can use another account (if you have one) or create a new one https://signup.live.com/
-
My registration has been confirmed, I posted my question, I filled in the details and expect an email to confirm my email address. He never came. What can I do on my question if I do not receive your email.
If you were registered you could not post here. Click on your name in the upper left corner of one of your posts to see your questions and messages.
This link will take you to the same place. -
HP 7210 all in one - will not be printed on the fast project configuration
For the last two weeks, my 7210 HP all-in-one has decided that he does not want to print on quick project more. I have the default settings of the printer on quick project, and I even went and edited individual documents to ensure that they are on the quick project, but it still prints on quality. I do a ton of printing on a daily basis, and that is to kill my ink, not to mention how long it takes. My OS is Windows 7, 64-bit.
Hey @kmh1883,
Thanks for getting back to me on this subject "fast draft" with your HP Officejet 7210 all-in - One Printer. Even if printing HP and doctor Scan found no problem, it seems that you may have a driver conflict. I would like to try another driver at the moment to see if this clears up your printing problems.
How to add another driver:
- Click on the Start menu
- Select the devices and printers
- In the devices and printers folder right click on your HP Officejet 7210 and left-click on properties of the printer
- Left click on the Advanced tab
- Left-click on new driver
- When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
- Select HP as the manufacturer on the left
- DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
- After selecting Deskjet 9800 hit next complete the new driver Wizard
- Under the printer properties window, select 'Apply' but do not hit OK
- Select the general tab
- Rename your printer in HP Officejet 7210
- Click OK
- Finally, right click on your HP Officejet 7210 one more time and left-click on Printing Preferences
- Left click on the paper/quality tab
- Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its project of Fast
- Press apply and OK
Test print from the print driver Deskjet 9800 replacing to check if the setting "Fast Draft" remains.
Please let me know if this solved your problem. Good luck!
-
Vista says THIS COPY OF WINDOWS is IS NOT AUTHENTIC
I bought windows vista Ultimate edition on December 17, 2007, it was a download through bit locker. I saved the e-mail of the conformation of the purchase. I am in the army and deployed to Iraq, when I received an email saying that my Bit Locker account would be deleted in August 2009. Well, the problem is I don't have the ability to do back ups of my purchases. I recently put the windows Vista ultimate on my new computer and continue to receive my Windows error messages are not authentic. Please y at - it a way to solve this problem.
Hi Grey203,
You can check your email to see if the key is there.
If you don't have the key, unfortunately there is nothing we can do.
If you are still in service in the army, then you can check if there is a program of release for consumption of your branch.
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit ourMicrosoft answers feedback Forumand let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Cisco has a software or a device can save the NAT information?
Hi experts,
Here's a government rule in our country, to provide at least 90 days NAT balls (or source called traces) if the market or the hotel provides internet services.
I just want to know, just about any device cisco can does support this?
ASA or firepower with ISE and internal drives?
Thank you very much.
Of course, ASAs will record all the NAT actions they take. Also all the connection records - assuming that you have logging enabled at the correct level.
You must send your syslog events to an external server for the archiving of history.
See something like suggesting this thread:
https://supportforums.Cisco.com/discussion/12515061/show-NAT-tranlations...
-
What pins to use to receive the data from the PDS ELITE RS485 with the PXI-8431/2?
Hello!
I use the PXI-8431/2 to read data from the flow meter PDS ELITE (Modbus RTU). Receiving data, the RS485 protocol request to terminals 4 and 5, but this configuration does not seem to work. When I connect the RS-485 converter USB of Microflex I get the data correctly, so somehow between the PIN lay and PXI this problem there.
Can someone help me?
See you soon,.
Steven
Hello Steven,
I think that what was Hossein trying to send you is the following:
How to connect and configure a device with RS-485 2-wire
Can you also tell me a little more what you use to read the data? What environment. You have 2-wire or 4-wire Modbus RTU?
Kind regards
Maybe you are looking for
-
Strange sound Compaq Presario CQ40-106TU
Hi all owners of HP products. I bought laptop Compaq Presario CQ40-106TU 3 weeks ago, until now, when I play music or movies, all 5 ~ 6 minutes I hear a short noise distorted through the headphones or the speakers. I've uninstalled and reinstalled th
-
PC running windows xp and all I get is bios
-
So, I have SlateBook 10-h000ss x 2 E2V43EA (32 GB internal mem) and I want to buy an sd card for more space. But I can't find documentation on the maximum size that is supported. I want to buy a 64 GB sd but it's too expensive to risk, I can't use th
-
interface Web Expressway-e (via HTTPS)
Hello So I disable Web interface (via HTTPS) thinking that I could access it via http, but not, so now I can't connect, is any way to activate it via ssh or the console. Thank you Dave
-
Where can I download a legitimate Windows 8 ISO? I have the product key?
I work on a computer from a friend, and I need a Windows 8 ISO to install on the system. It's OEM and I have the product key on the COA label.