DEVOUR: Camera uses battery

Similar Questions

• Phone vibrates on SMS, while using battery saver.

  Greetings. I use Xperia Z5 with all the possible official updates installed, and because STAMINA mode missing on 6.0, I almost always use battery saver mode. My problem is, when I silence the phone in BS ring, it vibrate on incoming calls, but not messages or notifications. I tried no BS and it vibrated on both. How can I configure my phone vibrate on notifications when it is all two reduced to silence and activated battery saver?

  No, you can't. This is how works battery saver. It limits the vibrations to important events only, in this case, the calls are important as an sms. vibration consumes more battery that is why it is limited by battery saver

• wake up sleep mode on Asus K51AC Windows 7 fail if using battery

  I have a problem of waking up to Asus K51AC mode 'sleep' in the case where the use of battery on Windows 7. No problems with the AC adapter / CC.

  Steps to reproduce the problem:

  (1) adapter to remove the laptop in order to use battery power

  (2) the default configuration of the power in Windows 7 button will turn off portable mode "Eve"

  3) press the power button and wait a few seconds for "sleep" mode (led on power button will begin to Flash)

  4 press power button) again.

  Step 4 Start computer laptop works somehow: System of cooling, HDD and power led is on BUT DISPLAY IS ALWAYS OFF. If press again the switch - no action? Search laptop computer stuck in this mode and not possible to turn on or off. The single step can be done - is to press and hold the power button for ~ 5 sec to turn off the laptop. If the still laptop power button press will start to start from the beginning, this means sleep mode has been lost.

  Please help to find how to "standby" mode wake up battery on my Asus K51AC feature.

  Important whether it is hardware problem laptop or Windows 7 problem.

  Hello

  Have you ever had this problem before?

  I recommend to update all your drivers and see if that fixes the problem.

  If not, you can try to run the System File Checker to fix corrupted files: http://support.microsoft.com/kb/929833/en-us

  You can try to repair the operating system using the recovery options:

  Press F9 while booting and repair, choose the recovery options.

  Also, if all else fails, you can try an in place upgrade, if you have the recovery media:

  http://support.Microsoft.com/kb/2255099

  Note that this will remove the custom settings, but programs and files will not be affected.

  However, I think that it is probably a hardware issue... many people report it, even on new laptops.

  I hope this helps!

  Mithrandir

• I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem?

  I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router.  Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know it works.  The Nook also works in a Barnes & Noble store it seems so that the works of Nook.  I have a similar problem with a LG Vortex phone where I can't do the wi - fi connection.

  Please post on the Support forums technical Nook for help because it is not a Windows 7 problem...

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/BD-p/nooksupport

  .. .also than that...

  http://www.barnesandnoble.com/u/nook-support-connectivity/379002491/

  Don't forget the network encryption type, IE. WPA2/WPA and key/password / password must match the wireless router/access point.

  See also this about WPA2 on the MN-700...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-connect-to-MN-700-wireless-router/1789978f-7C90-4686-A956-2d17eb79960d

• Synchronization multi camera using points, but no point

  Hi all

  The question is quite simple:

  Can I synchronize two clips for multi-cam using the point in but but not starting from the point.

  I thought it should be a basic option, given that many times, I have a point a minute in the video sync, but I still need this minute in the sequence obtained from multi-cam.

  This minute to lose since the multi-cam sequence starts from where was the sync point.

  Any ideas?

  Use markers instead of points.

• Can I attach my camera using Photoshop CS6? If yes how?

  Can I attach my camera using Photoshop CS6? How can I do? I have the cable and other articles as well.

  Hi picturemansteve,

  No, Photoshop does not have shooting tethered.

  Lightroom is a program that allows shooting tethered for devices mentioned in this list: a list of cameras that can be attached to Lightroom.

  Kind regards

  Claes

• How to convert my raw Filws extracted from my new Nikon d750 camera using Photoshop elements 11?

  How to convert my raw Filws extracted from my new Nikon d750 camera using Photoshop elements 11? How to convert my

  The D750 is not yet supported. It may be a few weeks before Adobe proposes an update to the latest versions of Photoshop/Elements. Perhaps in October/November.

  They generally provide a pre-release version of a few weeks in advance (any day now, I hope), but as far as I KNOW, they do not usually work on Photoshop Elements.

• At iPad2 in publication of DPS camera using

  We are studying the feasibility of creating a HTML cell that appears Mid-question, allowing users to take a photo with their camera and insert the page layout. Wondering if this is possible in the environment of DPS?

  Thank you very much!

  Stephen

  You can use the camera inside DPS publications on devices running iOS 6 or later version. It is a built-in feature of HTML in iOS6. Earlier versions of the operating system is not supported for this.

  To access the camera using something like this:

  <inputtype=fileaccept="video/*">  (for video files)

  <inputtype=fileaccept="image/*"> (for pictures)

  It is not possible to get on the GPS in a publication of DPS currently.

  Neil

• Equium M50-164: Question about timer use & battery fan

  Hello!!

  Just put your hands on my laptop equium m50-164 today and I wanted to clarify a few issues

  first of all,

  I flashed my bios with the latest version and after restarting, fan kicks at full power and has not extinguished until I put the laptop in standby mode, this seemed to fix the problem but fan seems suddenly in much more than compared to before, fortunately the fan isn't the one 100% , but more like 15-20% every 30 seconds or one minute then goes into silent mode the fan does not reach 100%, unless I have do a reboot :),.

  I know the fan will accelerate faster based on the use of the processor (thermal) etc. but is this normal? I talked to support and they wanted me to have an immediate replacement, but I said that I would wait a few days to see if she could calm :)

  and finally looking at the electricity meter and other software tools there seems to be no calibration of the battery, with previous laptops, I noticed that numeric calculations are made based on the use of the battery and time [i.e. a timer] but with this laptop that I kind find a timer - I would of thought tha any computer laptop has this facility today!

  any advice would help

  see you soon

  Ephid0r UK

  Hi ephid0r

  If the Toshiba service makes an instant replacement if you should take it.
  Maybe there's something wrong with the hardware or software.

  But as Feliks has suggested, you must first reinstall the Toshiba Power Manager.
  This utility is responsible for the CPU and the cooling module activations.

  PS: The time of battery life indication occurs if you move the cursor over the icon of standby power.

• Having a cell phone without a data mobile use battery?

  Quick question, although it might be a bit silly... the fact to have airplane off the coast with mobile data Mode (to just send SMS and call, idk what it's called) uses a lot of battery? Not make a call or something, but only at idle or using a Wi - Fi connection.

  Yes, a cellular connection uses energy just sitting there. It reports periodically on its location on the network, so the network can find the phone for incoming calls. It does not usually use a lot of energy, but if you are in a weak signal area battery drain will be noticeable. And if you regularly lose signal completely, it may use more energy just trying to reconnect. In addition, some applications that are not well written will use energy in trying to update when there is no data connection, which will use energy.

• Satellite L850 - after 1 year of use battery runs out quickly

  Hi, through programs such as care or battery battery I see a Toshiba Satellite L850 * 48% battery wear * currently. I notice that a game, the battery runs out quickly, as the warm up by many things and often descalibra and behaves erratically.

  The laptop is a year old. Is it normal that the battery to wear so much in so little time?
  Would you accept a warranty or replacement of the battery may claim the wear caused by improper use?

  http://img690.imageshack.us/img690/6976/4f7k.jpg

  First, please note that the battery working time depends on the use of the laptop.
  Running applications heavy performance as a game would drain the battery very quickly. Why? Because parties such as GPU and CPU and cooling to highest performance and this modules needs power.
  Also using the laptop with higher brightness may drain the battery faster.

  You should also know that each battery would start to loose own performance after about 500 charge cycles. This is nothing unusual and happens to all batteries.

  In order to avoid or slow down this process, its recommended to calibrate the battery from time to time.
  Calibration of means of loading and unloading the battery fully.
  Charge the battery until it could be fully charged, then disconnect the power adapter and keep the battery discharge up to his completely empty. Repeat 2-3 times in the line.

• Satellite C660 - use battery or adapter?

  I want to know when my C660 battery is fully charged if it is best to unplug my adapter and use my battery power or even allow to use adapter?

  If you use your laptop on the desk, connect it to the power supply. Don t be afraid that the battery will be damaged or lose the ability.

• Satellite C660d-A2k - how to increase the backlight of the screen using battery operation

  I bought a new computer laptop, installed all the drivers and it works.
  How to turn on the backlight?

  It works only when I charge the laptop. Turn off when it turns off.
  If add to the brightness of the screen up and turn the screen gets brighter the load.

  How to make led lights fixed, I put it in the market only when the load.

  Hello

  The brightness of the display can be changed using the key combination FN + F6 (increase) and FN + F7 (decrease).
  Have you read the user manual? This is mentioned in the manual that is preinstalled on your laptop.

  In addition, you should also check power Win 7 Options.
  You can find it in the control panel-> power options.

  I guess that switches from laptop to another optimized battery Central while you disconnect the adapter. In this case the brightness of the screen falls down to ensure longest battery working time. You can change the level of brightness for this plant too.

• Satellite 2430-301 uses battery plugged

  Hello!
  Sometimes, when executing programs from CPU, my battery begins to discharge up to zero, while the Toshiba Energy Manager even acknowledges that the laptop is plugged. After leaving the program (game), the doesn´t of the battery starts to charge, but the laptop won´t, turn off because it gets the energy cable s.
  What harm there?
  Thanks for the help!

  Hi Hendrik,

  It is possible that your power adapter begins to fail and cannot provide enough power for your laptop to meet any demand particularly heavy (such as using heavy graphics games). This will result in the power electronics from your laptop to battery power.

  Sometimes, disconnect and reconnect the power cord will return things to normal.

  Kind regards

• Will be A Officejet 6500 all-in-one printed my pictures from my camera using my sheets of Photo 4 x 6?

  Using Windows 7 64 bit and my all in one HP Officejet 6500 a can print photos from my camera on my HP 4 x 6 photo paper?

  The printer handle sheets of 4 x 6 because I do not see a photo paper tray I had in a previous HP printer all in one?

  Thank you for your help. Websites that recommend you explained what I needed to know.