DHCP fails with two subnets and RV325 and SG300 - 28 p
DHCP fails to issue addresses in double subnet environment. Please see attached.
Hello
Mr. Ezzell, after reviewing all the screenshots and have a look at your configuration and you are not able to change the arrangement for VIRTUAL LANs, you can try this:
As a work-around to use the router as DHCP VLAN 2 server, you can enable the DHCP server on the router for the VLAN 1, leave 2 IP addresses available, lets say 192.168.1.253 to 192.168.1.254 then go to static DHCP under network and the local network and hire two false addresses to these two IP addresses, so they will not be assigned to all devices. This way you will always be able to use your DHCP server without having to disable the DHCP server on the router
Thank you for pointing out the firmware version very low on your switch, you actually run the firmware that came out of the unit.
Here is a link to the firmware download page:
https://software.Cisco.com/download/release.html?mdfid=283019669&flowid=...
Please upgrade to the following firmware versions:
1.2.9.44
1.3.0.62
1.3.5.58
1.4.0.88
Keep in mind that on the 1.3.5.58 version, you must also upgrade the bootcode using TFTP software.
Once you are done with the upgrade of the connection check and see if it works.
Tags: Cisco Support
Similar Questions
-
I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?
I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?
Use BCDEDIT to SET the description that you are wanting to "Rename" and also to choose the displayorder, timeout and that you load by default...
Maybe this old conversation will help you:
http://www.SevenForums.com/general-discussion/20191-renaming-earlier-version-Windows-dual-boot.html -
Best practices for network configuration of vSphere with two subnets?
Well, then I'll set up 3 ESXi hosts connected to storage shared with two different subnets. I configured the iSCSI initiator and the iSCSI with his own default gateway - 192.168.1.1 - targets through a Cisco router and did the same with the hosts configured with its own default gateway - 192.168.2.2. I don't know if I should have a router in the middle to route traffic between two subnets since I use iSCSI ports linking and grouping of NETWORK cards. If I shouldn't use a physical router, how do I route the traffic between different subnets and use iSCSI ports binding at the same time. What are the best practices for the implementation of a network with two subnets vSphere (ESX host network: iSCSI network)? Thank you in advance.
Install the most common iSCSI would be traffic between hosts and
the storage is not being routed, because a router it could reduce performance.
If you have VLAN 10(192.168.1.0/24) iSCSI, VLAN 20 (192.168.2.0/24) ESX
MGMT and VLAN 30 (192.168.3.0/24) comments VMs and VLAN 40 (192.168.4.0/24)
vMotion a deployment scenario might be something like:
NIC1 - vSwitch 0 - active VMK (192.168.1.10) MGMT, vMotion VMK (192.168.4.10)
standby
NIC2 - vSwitch 1 - current (VLAN30) guest virtual machine port group
NIC3 - vSwitch 2 - active VMK1 (192.168.1.10) iSCSI
NIC4 - vSwitch 2 - active VMK2 (192.168.1.11) iSCSI
NIC5 - vSwitch 1 - current (VLAN30) guest virtual machine port group
NIC6 - vSwitch 0 - MGMT VMK (192.168.2.10) standby, vMotion
VMK (192.168.4.10) active
You would place you on VLAN 10 storage with an IP address of something like target
192.168.1.8 and iSCSI traffic would remain on this VLAN. The default value
gateway configured in ESXi would be the router the VLAN 20 with an ip address of
something like 192.168.2.1. I hope that scenario help set some options.
Tuesday, June 24, 2014 19:16, vctl [email protected]>
-
Is it possible to put a picture in a dialog box with two buttons and a legend?
I wish I had a pop-up dialog box that shows a picture with a caption and allow an operator to click 'OK' or 'Cancel '.
This was done before or are at - there alternatives? I thought to have two separate pop ups, but this would not also be treated for a definitive solution.
Thank you.
Hello jmc.
See the links below. This will be useful for you.
http://forums.NI.com/T5/LabVIEW/A-picture-as-a-dialog-box/TD-p/236851
http://forums.NI.com/T5/LabVIEW/dialogbox-with-user-input-and-image/TD-p/1601214
-
I'm trying to do a clean install of windows 7 Professional (32-bit) on my laptop ASUS X61SL. Initially there was Vista Home Premium (32-bit) running on this laptop.
After the start of the boot and windows 7 by loading files and starting windows comes the blue screen saying:
STOP: 0x0000007E (0xC0000420, 0x8EB256C6, 0x8A386640; ox8A386170)ACPI.sys - address 8EB256C6 base at 8EAD7000, Datestamp 4CE78F21I tried an update of the BIOS already and a full erase of the disk which has been recommended by the ASUS support. Nothing worked, and not even the ASUS support has other ideas how to get Windows 7 to run.OK, how much RAM have you?
I found this information:
However, I remembered seeing something on the Internet about Microsoft 64-bit being unhappy with 4 GB of ram during the installation process of the systems... .then I got 2 GB of ram and the installation went OK! I will give the memory later.
Source:
I know - you try to install the Win7 SP1 32 bit only, but you can try it.
LC
-
InitialLdapContext fails with Java 6 and 7
I work with GSSAPI successfully with JAVA 5. With JAVA 6 and 7 of the InitialLdapContext call fails with the following stacktrace:
> > > KRBError:
sTime is Fri 14 Jun 13:40:01 CEST 2013 1371210001000
suSec is 948732
error code is 7
Error message is that server not found in the Kerberos database
Realm is DE.XXX.NET
sName is ldap/yyy.de.xxx.net
msgType is 30
KrbException: Server not found in the Kerberos database (7)
to sun.security.krb5.KrbTgsRep. < init >(Unknown Source)
at sun.security.krb5.KrbTgsReq.getReply (unknown Source)
at sun.security.krb5.KrbTgsReq.sendAndGetCreds (unknown Source)
at sun.security.krb5.internal.CredentialsUtil.serviceCreds (unknown Source)
at sun.security.krb5.internal.CredentialsUtil.acquireServiceCreds (unknown Source)
at sun.security.krb5.Credentials.acquireServiceCreds (unknown Source)
at sun.security.jgss.krb5.Krb5Context.initSecContext (unknown Source)
at sun.security.jgss.GSSContextImpl.initSecContext (unknown Source)
at sun.security.jgss.GSSContextImpl.initSecContext (unknown Source)
at com.sun.security.sasl.gsskerb.GssKrb5Client.evaluateChallenge (unknown Source)
at com.sun.jndi.ldap.sasl.LdapSasl.saslBind (unknown Source)
at com.sun.jndi.ldap.LdapClient.authenticate (unknown Source)
at com.sun.jndi.ldap.LdapCtx.connect (unknown Source)
to com.sun.jndi.ldap.LdapCtx. < init >(Unknown Source)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL (unknown Source)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs (unknown Source)
at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance (unknown Source)
at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext (unknown Source)
at javax.naming.spi.NamingManager.getInitialContext (unknown Source)
at javax.naming.InitialContext.getDefaultInitCtx (unknown Source)
at javax.naming.InitialContext.init (unknown Source)
to javax.naming.ldap.InitialLdapContext. < init >(Unknown Source)
in kerberos. UserRoles2.getUserRoles (UserRoles2.java:27)
in kerberos. Server$ 2.Run(Server.Java:240)
in kerberos. Server$ 2.Run(Server.Java:1)
at java.security.AccessController.doPrivileged (Native Method)
at javax.security.auth.Subject.doAs (unknown Source)
in kerberos. Server.getRoles (Server.java:233)
in kerberos. Server.main (Server.Java:95)
Caused by: KrbException: identifier does not match value expected (906)
at sun.security.krb5.internal.KDCRep.init (unknown Source)
at sun.security.krb5.internal.TGSRep.init (unknown Source)
to sun.security.krb5.internal.TGSRep. < init >(Unknown Source)
... more than 29Problem research directory: javax.naming.AuthenticationException: GSSAPI [root exception is javax.security.sasl.SaslException: Insider GSS failed [caused by GSSException: no information provided valid identification (level mechanism: server not found in the Kerberos database (7))]]
Does anyone has an idea what is going wrong at Java 6 or 7?
The ktab file is created with the tool of a JRE version 7 ktab.
"c:\Program Files\Java\jre7\bin\ktab.exe" - a [email protected] password my.keytab - n 0 k
"c:\Program Files\Java\jre7\bin\ktab.exe" - a Service/[email protected] password my.keytab - n 0 k
Active directory in Windows server 2008
Don't forget: if I use Java 5, the call to InitialLdapContext works as expected.
Thanks in advance
Michael
The problem is resolved.
I used an alias in dns for the ldap_url property name. In Java 1.5, the dns alias name has been resolved to the real dns name. It can't even solve it in Java 1.6 and 1.7.
A real dns name change solved the problem.
-
RTF model. body with two loops and custimized footer
Hello.
I have a rtf model with a body and a custom footer. The body has two loops. The first loop x cheques and the second for loop for x elements of each control.
The footer must be individually for each control. Is there a possibility of variable access from the first loop of the body in the foot?
the structure of my rtf file:_
header: vacuum
body:
<? for-each: Scheck? >
An asfdfadsfasdf: <? One? >
Article price
<?-foreach: point? > <? name? > <? price? >
<? end foreach? >
Summe: <? sum (price)? >
<? model: footer? >
<? One? > does not work*.
<? end model? >
<? split-of-page-break:? > <? end foreach? >
footer:
empty space
empty space
empty space
empty space
empty space
empty space
empty space
empty space
empty space
<? Call: Footer? >
an excerpt from my xml file:_
< root >
< Scheck >
< item > < name > Kunststoffe < / name > < price > 22000 < / price > < / item >
< item > < name > Metalle < / name > < price > 100000 < / price > < / item >
< item > < name > Holz < / name > < price > 6000 < / price > < / item >
< item > < name > paper < / name > < price > 100 < / price > < / item >
< item > < name > Kunststoffe < / name > < price > 22000 < / price > < / item >
< item > < name > Metalle < / name > < price > 100000 < / price > < / item >
< item > < name > Holz < / name > < price > 6000 < / price > < / item >
< item > < name > paper < / name > < price > 100 < / price > < / item >
< item > < name > Kunststoffe < / name > < price > 22000 < / price > < / item >
< item > < name > Metalle < / name > < price > 100000 < / price > < / item >
< item > < name > Holz < / name > < price > 6000 < / price > < / item >
< item > < name > paper < / name > < price > 100 < / price > < / item >
< item > < name > Kunststoffe < / name > < price > 22000 < / price > < / item >
< item > < name > Metalle < / name > < price > 100000 < / price > < / item >
< item > < name > Holz < / name > < price > 6000 < / price > < / item >
< item > < name > paper < / name > < price > 100 < / price > < / item >
< item > < name > Kunststoffe < / name > < price > 22000 < / price > < / item >
< item > < name > Metalle < / name > < price > 100000 < / price > < / item >
< item > < name > Holz < / name > < price > 6000 < / price > < / item >
< item > < name > paper < / name > < price > 100 < / price > < / item >
< item > < name > Kunststoffe < / name > < price > 22000 < / price > < / item >
< item > < name > Metalle < / name > < price > 100000 < / price > < / item >
< item > < name > Holz < / name > < price > 6000 < / price > < / item >
< item > < name > paper < / name > < price > 100 < / price > < / item >
< item > < name > Kunststoffe < / name > < price > 22000 < / price > < / item >
< item > < name > Metalle < / name > < price > 100000 < / price > < / item >
< item > < name > Holz < / name > < price > 6000 < / price > < / item >
< item > < name > paper < / name > < price > 100 < / price > < / item >
< Payment > HUNDERTACHTUNDZWANZIGTAUSENDEINHUNDERT < / payment >
< a > Firma1 < year >
< / Scheck >
< Scheck >
< element > < name > end < / name > < price > 2000 < / price > < / item >
< item > < name > Metalle < / name > < price > 10000 < / price > < / item >
< item > < name > Holz < / name > < price > 600 < / price > < / item >
< item > < name > paper < / name > < price > 10 < / price > < / item >
< element > < name > end < / name > < price > 2000 < / price > < / item >
Thank you for helping me!
Edited by: user12052573 the 19.05.2010 02:00Hello
change your main loop shape
This will create a new page with a section break for each change in 'Scheck. You can remove your split sentence of page break.
-Karine
-
expdp fails with ORA-31693 and ORA-01555
Hello
I use Oracle Database 10 g Enterprise Edition Release 10.2.0.4.0 - 64bi under hp - ux
I export the DB as follows:
password/expdp system.
Full = y.
dumpfile = backup_dir:expdp_$ ORACLE_SID.dmp.
logfile = backup_dir:expdp_$ ORACLE_SID.log.
exclude = statistics-
estimate statistics =.
flashback_time =-"TO_TIMESTAMP\ (\ ' $DATE_EXP\ ', \'YYYY-MM-DD HH24:MI:SS\'\) \" "
It has always worked well, but this morning I received an error message:
ORA-31693: Data Table object "DFE". "' TGV_CONTROLE ' failed to load/unload and being ignored because of the error:
ORA-02354: Error exporting/importing data
ORA-01555: snapshot too old: rollback segment number 1 with the name ' _SYSSMU1$ ' too small
ORA-00604: an error has occurred at the SQL level recursive 3
ORA-08180: no snapshot found on the basis of time specified
ORA-06512: at "SYS." TIMESTAMP_TO_SCN', line 1
ORA-00604: an error has occurred at the SQL level recursive 3
ORA-08180: no snapshot found on the basis of time specified
no idea what that sometimes causes this error?
Thank youThe time that you specified is mapped to an invalid SCN, a SCN beyond the current retention policy used.
You can try more big parameter UNDO_RETENTION or flashback for the more recent time and start again. -
OBS: Script InDesign CS3:
I have a document with two pages but a file name!
I need a script which
1 export the two pages in format PDF separated two - so NOT a single PDF file with two pages but two PDF files
2. the first PDF file must have the same name as the document - for example .indd13ESW110020216TC0-> ESW110020216TC013.pdf
3. the second PDF file will be added to the last number - so .indd14ESW110020216TC0-> ESW110020216TC014.pdf
Is it possible to integrate this script:
var doc = app.activeDocument; var _PDFfile = new File('\\\\testserver\\' + app.activeDocument.name.replace (/\.indd$/, '.pdf')); var _PDFExportPreset = app.pdfExportPresets.item('MyPdfSetting'); if (_PDFExportPreset == null){ alert('PDF Export Presets not found'); exit(); } app.pdfExportPreferences.pageRange = PageRange.ALL_PAGES; doc.exportFile(ExportFormat.pdfType, _PDFfile, false,_PDFExportPreset);
Hello
Try this...
-
This is my urgent problem:
I have a physical machine with two physical network interfaces. I have a VMWARE player and a virtual machine that must use cards on two different subnets, a public directly to the router and an intranet within the company.
How can I just say a net card to go on this submarine and the other on the public void? Go crazy. Help, please.
Thank you
P.
Use the virtual network editor VMware Player, create an additional bridged VMnet and bind each bridged to a different physical network... card VMnet on a virtual machine, create a virtual network adapter on each subnet and bind each virtual network adapter to an another VMnet jumpered.
For additional help with virtual network Editor, check this KB: VMware KB: using the VMware Workstation virtual network editor
-
Help please with two extremes and DNS
Hello
I hope someone can help.
My setup
Modem-router ADSL with WiFi turned off >
Airport extreme connected by ethernet to the Modem/Router - create a wireless network, a static IP - Bridge Mode - >
Airport extreme connected by ethernet to the Airport extreme - create a wireless - Mode Bridge >-static IP address
Both now have the status message - "no DNS - this Airport base station does´t server have a DNS server address and could have problems connecting to the Internet." If the airport is in Bridge Mode is necessary enter the DNS server (no shows at what time the DHCP value)? I should give him the address of the modem/router or real DNS I see in my modem/router settings?
Also the WiFi mode extend a wireless network is only fair for multiple extremes that extend wireless (No ethernet cable)?
Thank you
Turning off the modem/router
Power off each AirPort Extreme
Wait a minute
Turn on the modem/router and let it run for a minute
Put on single AirPort Extreme and check its status
If the first AirPort Extreme looks good, the second turns on and check its status
Report on the results
If you're still having problems...
The two extremes of the airport are working properly in the past... and this problem appeared just... or... is that what you are having trouble with a new configuration?
When you say that every AirPort Extreme has a static IP address, this means that each AirPort Extreme has been configured to request a specific IP address... or... does that mean that you have configured your modem/router to provide a specific IP address for each AirPort Extreme?
If you check the settings for each AirPort Extreme... each of them receives the static IP address that the router/modem is the assignment?
-
Former title: upgrade to Windows 7.
I installed the Windows 7 upgrade. I was running Windows Vista Home Premium 32 bit. The upgrade installed without problem, but I have problems with updates. It shows now that the downloads are 97%, but when I double click the icon to update in the center of the Action, it does not open. My installation history that two updates failed. They are:
Update security for Windows 7 (KB972270)
Update for Windows 7 (KB976662)
Error details: Code 800706BE
My computer is a Dell Inspiron 1525. Any help would be greatly appreciated.
Error details: Code 800F0902
Hello
Method 1.
Windows provides a built-in utility that can automatically find and fix some problems with Windows Update.Here are the steps to run this utility for troubleshooting.
a. open the Windows Update Troubleshooter by clicking the Start button, then Control Panel.
(b) in the search box, type troubleshooting and then click Troubleshooting.
c. under system and security, click Fix problems with Windows Update.
Method 2.Try also download and install these updates manually and check.
Here are links to these updates.Update security for Windows 7 (KB972270)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=75491ad0-40A6-4EFB-9574-d82210f6d0da&displaylang=en#requirements
An update is available for the native JSON feature in Internet Explorer 8
http://support.Microsoft.com/kb/976662Method 3.
We can try to reset the Windows Update components and check if that helps resolve the issue.
This article helps you reset the Windows Update components. So that we can reset the Windows Update components for you, go to the "Fix it for me" section.To reset the Windows Update settings yourself, go to the section "Let me fix it myself".
Please see this article for steps and additional information.
http://support.Microsoft.com/kb/971058Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates
For more information and troubleshooting methods more check the items below.
Center solutions Microsoft Update
http://support.Microsoft.com/ph/6527#TAB0
I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
I can't install KB976325 update.
The system is Vista Ultimate (64-bit) Service Pack 2.
Error returned is
"WindowsUpdate_8007371C" "WindowsUpdate_dt000"
I did the following:
* Reset Windows Update via KB 971058
* Check the files with the file system Checker: no problem found
* Downloaded KB 976325 as a stand-alone file, the update failed (no error given)
* Ran Windows Live OneCare Safety Scanner: no problems found.
* Ran Windows Defender quick scan: no ound problems
* Clean the registry and temporary files with Windows DefenderThere must be a solution to this problem!
In desperation, I tried the Windows 7 upgrade. The upgrade failed at the last step. Vista was reinstalled and it works OK. However, I can't yet do the KB 976325 update! Oh, the Windows Defender definitions file has been updated through Windows Update fine.
Walter,
FYI-you are in the right forum. All Windows Update components are in the same enclosure. It is important to publish the specifications of your system, as you did.OK, lets start with a few basics. This KB976325 update is an update of security for Internet Explorer 7.
-First question is therefore always you use IE7 or have you moved to IE8?
-If you are looking for your update history is this show as installed KB? It is possible that it is already installed and that it is presented again for some reason any.Take a look at this article. It does not appear that you have tried these steps yet. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Data Guard Broker fails with ORA-16635 and ORA-03135
Hi all
I configured Oracle RAC with 11.2 Dataguard on Windows 2003.
I have already configured standby without Data Guard Broker and everything works fine, but when I try to use Data Guard Broker, it cannot synchronize the files of the Data Guard Broker.
I tried everything, including MOS, but not found anything.
I get this error.
Primary
Sleep modeDG 2011-02-11-09:15:41 0 2 0 NSV1: (MIV = 57) Start sending metadata file: "+DG_DATA/orcl/dgbroker/dg_config_file1.dat" DG 2011-02-11-09:15:41 0 2 0 NSV1: Sending block #1 (containing MIV = 57), 67 blocks DG 2011-02-11-09:15:42 0 2 0 NSV1: Error sending block #1, size 67 blocks. Error is ORA-16635. DG 2011-02-11-09:15:42 0 2 0 NSV1: Current network link for metadata resync is broken. DG 2011-02-11-09:15:42 0 2 0 NSV1: (MIV = 57) End metadata file transmission: opcode CTL_ENABLE (1.1.1825138532) DG 2011-02-11-09:15:42 0 2 0 NSV1: Can't send CLOSE message to DRCX. Network error is: ORA-16635. DG 2011-02-11-09:15:42 0 2 0 NSV1: Error is ORA-03135 connection lost contact DG 2011-02-11-09:15:42 0 2 0 NSV1: Current network link for metadata resync is broken.
DG 2011-02-11-08:35:39 3001000 3 1825138419 for opcode = CTL_ENABLE, phase = RESYNCH, req_id = 1.1.1825138419 DG 2011-02-11-08:35:39 0 2 0 NSV2: Error sending block #1, size 67 blocks. Error is ORA-16635. DG 2011-02-11-08:35:39 0 2 0 NSV2: Current network link for metadata resync is broken. DG 2011-02-11-08:35:39 0 2 0 NSV2: (MIV = 11) End metadata file transmission: opcode CTL_ENABLE (1.1.1825138419) DG 2011-02-11-08:35:39 0 2 0 NSV2: Can't send CLOSE message to DRCX. Network error is: ORA-16635. DG 2011-02-11-08:35:39 0 2 0 NSV2: Current network link for metadata resync is broken. DG 2011-02-11-08:35:39 0 2 0 NSV2: Metadata Resync failed. Status = ORA-16635 DG 2011-02-11-08:35:39 3001000 3 1825138419 DMON: Database ORCLSTBY returned ORA-16635
Hello
CISCO firewalls have a configuration option 'inspect sqlnet' or 'deep packet inspection '. This setting can affect the transfer of certain data on the network and the result in malformed packets or down.
Check if this option is enabled, if it is turn off the option "inspect sqlnet" at the firewall level.
And try again...
Kind regards
Levi Pereira -
ODI the Package execution fails with ODI-1228 and ORA-20000 not sufficient privileges to analyze
Hello
I am trying to execute the package to ODI to have this error:
Header 1 ODI-1228: GATHER_SCHEMA_STATS-DW_STAGE (procedure) task fails when connecting ORACLE target ORACLE_SERVER.
Caused by: java.sql.SQLException: ORA-20000: not sufficient privileges to analyze an object in the schema
ORA-06512: at "SYS." DBMS_STATS", line 24867
ORA-06512: at "SYS." DBMS_STATS", line 24945
ORA-06512: at "SYS." DBMS_STATS", line of 24899
ORA-06512: at line 2
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1115)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3954)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1539)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:292)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:744)
(1) DW_STAGE and DW_REPORT have "ANY ANALYSER" and "UNLIMITED TABLESPACE" privilege and roles "S/n", 'CONNECT' and 'RESOURCE '.
(2) agents are all running
(3) tested ORACLE_SERVER and he succeeded
Need for emergency assistance.
Thanks in advance-
ADI
OK, I solved it.
As part of Oracle under Technologies--> Oracle in the Studio of the ODI, I gave in the uid and password for DW_STAGE and it fixed the problem!
Thank you all for your help and suggestions!
ADI-
Maybe you are looking for
-
I can't install the latest driver for my Intel HD graphics 3000. I went through the website of intel and tried to install it manually, but that has not worked. I would get an error that says "your pc does not meet the minimum requirements to install
-
My laptop DV4-2165dx, who is aged 4 years, now gives me a warning message at every single boot upward on the internal battery being low ability. This may very well be true because of his age, but I don't really like, and it is certainly unnecessary e
-
Dynamic screen low level Sub vi high-level VI main road
I have a program VI that inturns calls a lot under vi mode step by step. I need to display the path of lowest level vi in the top level vi main. (here in my program, I have 3 levels of void / vi) and I need the path least void level vi to be disaplye
-
Elitbook 840 G1: HP Elitbook 840 g1 - M.2 SSD slot
Hello! As you can see from the image below, I am after a compatible disc SSD m2 (ideally 256Go). I selected in red the single 'hole' in the connector as the largest part of the SSD M2 card I see online have two "holes". Any recommendations would be m
-
a closed agent ssgray00 - using the standard password not work, using the new password not work changing password. Now collected approximately 7 codes pine only automated responses come thrus. What are the steps to reset the password? Those published