Diagnostic test error: drive hard hitachi failed the diagnostics tests

My computer is a HP Pavilion 6500 series; Windows 7 64-bit. under 18 months.  Receipt of the following error messages to a HP diagnostic test: drive hard Hitachi failed the diagnostics tests: test to look at random; funnel seek test; surface scan test. Please notify.  I need to replace the hard drive?

Hi Pete,.

You are welcome.

It is difficult to say exactly why the HARD drive started to fail and there's always a random item concerned - I've known a few hard drives fail after a few weeks, while others can be quite happily far longer than expected.

Best regards

DP - K

Tags: HP Desktops

Similar Questions

  • Mounting my drive hard exFAT fails more than 70% of the time in Windows XP.

    Mounting my drive hard exFAT fails more than 70% of the time in Windows XP.  I downloaded the Microsoft exFAT driver (Windows XP-KB985704 - x 86 - ENU.exe) and installed XP Service Pack 3.  However, when I turned the computer off and restart it, the disc will install.  I'm having this problem with several readers.  Looks like the player trying to get (new Windows hardware sound chimes when you plug in the drive).  Then rapidly thereafter dismantle it quickly sounded. When I take the car and plug it into my Mac, it is still rising.  Is it possible that I have to do something more to install the Microsoft exFAT driver?  The drive is made by G-technology.  I also tried to remove the disc before you turn off the computer and turn off the computer with the mounted drive yet.  Whatever it is, the reader is not recognized when I restart the computer.  I ran an on the disks and sometimes Apple disk utility, I get the message that the reader has a cluster to run repair disk.  After that, the player either go up or not.  There is no virus on the Windows computer.  The operating system is a novelty.  I use the system only to run AVID.   No other software is on the computer other than what came with it.  The computer is a HP 8600 workstation.  I mount the drive through a port firewire 400 on the computer using firewire 400 to 800 cable G technology.

    Hi motionpicturedirector,

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click on Start , then run.

    (b) type msconfig , and then click OK.
    The System Configuration utility dialog box appears.

    (c) click on the general tab, click Normal Startup - load all device drivers and services , and then click OK.

    (d) when you are prompted, click restart to restart the computer.

  • Can not find the external driver drive HARD Hitachi

    Hello

    I have a driver problem with the drive HARD Hitachi hts541616j9at00 mentioned.
    Can anyone help?
    How can I updated the driver?

    Thank you

    Sorry, but I really don t understand why you need a driver for the HARD disk?
    To be honest I don't know what you want to do maybe you could explain what you want to do exactly?

  • Satellite A300 PSAGCA - 02Y010 - error: driver Webcam open failed

    Problem:
    Receive error whenever I try to use the camera for Toshiba support software: Webcam driver open failed. Restart the computer or the camera. Webcam does not work in Skype. It seems that it is a very common problem with the A300s series, but there is no clear solution there.

    Material
    Series: A300
    Model: PSAGCA-02Y010

    Software
    Operating system: Windows 7 64 bit
    Camera Assistant Software for Toshiba: 1.7.175.0123

    Details
    I recently did a clean install of Windows 7, Windows Vista update. I've never used the web cam on Windows Vista, so I can't testify as to whether or not the web camera is workin properly. However, when I tried to use it with Skype, it did not work. I reinstalled the driver that I backed up before I installed the new operating system, but it did not work. The web cam does not appear at all in Device Manager - even when the value for show hidden devices. Trying new material added through the control panel fails to detect the webcam at all. I rebooted after each installation/repair of the driver.

    Measures taken

    Reinstalled drivers saved
    I used the third-party software (Double Driver) to back up and reinstall the drivers for the webcam after I installed Windows 7. Double Driver claimed there was no device to install the driver. Manually, I copied the files in the folder using the camera and replaced existing ones. The files I copied were:
    casflr.cat
    oem34.inf
    Restore.ini
    UVCFTR_S.SYS

    Pilots relocated from site Web from Toshiba
    Vast Goolging turned only recommendations to uninstall and reinstall the drivers. I was unable to find the drivers for windows 7 64 bit, but I tried for my laptop model for Windows Vista 64 - bit - no luck. I tried to install software camera for Toshiba support, as far as I know, including the driver - it gives me the error described above.

    I also tried to find a universal Windows 7 driver for the webcam - I was unable to find one.

    Check the registry value is Correct
    I tried also checked the registry value to HKEY_LOCAL_MACHINE/System/ControlSet001/Enum/USB/SN001/ClassUID corresponds to the value in C:\Program Files (x 86) \Camera Assistant Software for Toshiba\driver\64bit\casflr.inf as and C:\Program Files (x 86) \Camera Assistant Software for Toshiba\driver\32bit\casflr.inf recommended by some article is recommended.

    Please, I would really appreciate it if someone could help me out here. I've exhausted all the options I can think.

    Probable solution:
    I met a thread post who suggested a loose wire was responsible and that the camera could work when the cover is almost closed. I tried this and the camera suddenly appeared in the Device Manager. However, I still can't make it work with Camera Assistant Software or Skype.

    Post edited by: A300Owner

    > The web cam does not appear at all in Device Manager - even when the value for show hidden devices.
    > I met a thread post who suggested a loose wire was responsible and that the camera could work when the cover is almost closed. I tried this and the camera suddenly appeared in the Device Manager.

    Does this mean that webcam does not appear in Device Manager if the cover is open right?
    In this case, it seems that there is no link between the webcam and the motherboard.
    As far as I know as the internal cam is connected to the controller card USB mother s and possibly there is a bad connection.

    Possible solution: I think that the technician needs to disassemble the laptop to check the connection :(

  • a digital game gives error driver and closes to the main screen

    When I play it crashes

    It says digital error driver when im playing a game and there's a lot that happens in the game wise grafich it freezes it goes back to the start screen saver, but it is reinforced by 500% the Start button is large enough. I restart the any then it goes back to normal. What can I do please help me thank you

    There are many reasons why a PC "behaves" in this way.

    These annoying 'glitches' can be caused by an overloaded hard drive, CPU overworked, Malware, 2 AV, useless data, browser addons, or you can have unnecessary programs running in the background, etc...

    For you to try - troubleshooting steps

    * If you are overclocking STOP.

    * Make sure that all the intake/exhaust vents are clean as well as fans.
    Download some software temp monitoring for cpu, gpu.

    * Event Viewer.
    Type eventvwr in the search and go into windows journal > application tab.
    Search for errors. Errors have red in the left column.

    Look for errors that say crash app, app crash, or everything about the CURRENT problem.
    When you find either take them a screenshot of them and download about us, or note the ID codes and event source and look for them in Google.

  • Drive hard new for the car and recovery

    Hello

    I have a Pavilion dv4-2141nr S/N: [personal information deleted]. I installed a new model of disc hard WD WDBMYH0010BNC-NSPS, + 2.5 - inch SATA 3 Gb/s. I set the BIOS to start fron DVD/CD and it appears "no boot device - insert boot disk and press a key" on the screen. I tried to reset the hard drive several times and it always comes to the top. What I am doing wrong?

    Sorry, that didn't work.

    It could be a bad set of recovery discs, a bad DVD player, who knows?

    But there a sure fire way to know, if you're in the game.

    Make your own bootable installation of W7 Home Premium DVD.

    If you can still read all 25 characters of the product key of W7 on the bottom of your laptop, you can use the support that you have installed windows (assuming that the set of recovery disks is bad).

    http://MSFT.digitalrivercontent.NET/win/X17-24209.ISO Windows 7 Home Premium x 64 English

    Make sure you get the entire file to download.  Occasionally he sometimes displays a full download, but you don't have the file xx GB 3. integers download.

    Then use this tool to transfer the ISO to a flash USB 4 GB or DVD drive.  This tool will also make a bootable media.

    http://www.Microsoft.com/en-us/download/Windows-USB-DVD-download-tool

    If you can boot from the DVD drive (assuming you make the DVD) so you can contact HP and ask to have your money back, or make another set of recovery discs you sent.

    If you cannot start from ther DVD once again, there is a hardware problem any.

    Try to put the ISO file on a 4 GB USB flash drive and if you can boot from that and install Windows, then you know that there is some sort of problem with the hardware with the DVD player.

  • where can I find support for installing a drive hard hitachi

    I'm working on the laptop of a friend (aspire 5253) who had a virus package root.  After spending hours trying to get out I decided to wipe the hard drive.  I glued the Win7 has begun the installation until I got the message BOOTMGR is missing. After moving to the front, the system is now looking for media drivers, most likely, hard drive...?  There is not a driver available for this portable device disc and the acer site has no driver, that he needs.  any suggestions on how to fix this?  THX in advance

    1. on another computer, download the tool and create a Windows 10 installation media.

    https://www.Microsoft.com/en-us/software-download/Windows10

    2. go aspire 5253 BIOS settings to activate the Boot Menu to boot from USB or DVD and then save/quit.

    3. start windows 10 support that you created in step 1.

    4. When you see the screen below, press SHIFT + F10, so you have access to a command prompt

    5. use "diskpart own", not only clean the hard disk, but also to put it in an uninitialized state (works for HDDs and SSDS)

    http://Forum.crucial.com/T5/the-CRU/reset-your-SSD-to-factory-settings-Windows-Diskpart/BA-p/162503

    6. Remove windows 10 installation and insert the media to install windows 7.

    7. turn off the computer (turn off the computer)

    8 turn on the computer and install windows 7.  Select custom installation.  Do not partition or format the hard drive.  Just click on the drive (unallocated space) where you want to install windows, and then click "next".  Windows setup will automatically partition and format your drive for you. (Or if you use an Acer recovery media, follow the instructions of Acer)

    9 Windows 7 drivers are here:

    http://us.Acer.com/AC/en/us/content/drivers

    --------------------------------------------------------------------------------------------------

    (Also, instead of install windows 7, you can install windows 10 If you want to give it a shot, but you will need to enter the key of windows 7 to a point, so you can activate the free upgrade.) It is difficult to say whether or not Windows will find all windows 10 drivers for your computer.  You may go directly to the website of component manufactures to find windows 10 drivers.  Acer does not provide 10 drivers for your computer... model and your computer may or may not work properly with windows 10)

    http://us.Acer.com/AC/en/us/content/Windows10-eligible-models

  • I have vista 32-bit, he sees not my new drive hard hitachi, in device manager it shows that it works correctly?

    Why my expoler does not see my new drive hard when it is in the device as o.k. Manager.

    Look for the drive in computer management, it may need to assign a drive letter.

    Change, add, or remove a drive letter
    http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  • Vista activated on the old hard drive hard disk failed to load to the new disk hard wont let me enable

    Vista activated on the old hard drive, failed loaded hard drive vista Ultimate edition on the new hard drive, but do not let me activate. This is a saved copy and use the product from the back of the disc that contains key

    Hi Tony,.

    I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

    You can go through the steps in the link activate Windows Vista by phone activation.

    Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.

  • Drive HARD recovery failed

    Hi all

    I just tried to do a factory reset on my satellite netbook (which I've done a few times before), but it failed. I got as far as the system wipe, but got an error saying that there is no current backup.

    To restart, I am unable to access the utility and get an error saying no BONES found.

    I have another version of windows knock around, so used quepour starts the machine. I can see the partition containing the files of recovery is still present and the files are still there. Anyone got any ideas how I can use it to restore my computer?

    I have all other backups and I don't want to order recovery disks (my machine has not in any case of a hard drive).

    Any thoughts or ideas would be apprecited.

    Thank you!

    Problem, is that there are not any special trick or workaround to force the installation of HARD drive recovery. Maybe it sounds stupid now, but either it works or not. Of course, there is a reason why it does not work. I don't know what have you done with your machine so can just speculate what may be the reason.

    Like many other people you've made big mistake: you didn't create recovery (DVD or USB) media. The user s manuals document, clearly describes how it can be done and why. These created recovery media can be used if there is problem with the installation of recovery of HARD drive or what HARD drive fails and must be replaced by a new one.

    Sorry, but I don't see a good option for you now.
    By the way: why you won't restore disk original order?

  • Satellite A100-906: need a drive HARD HITACHI 7400 vs SEAGETE 7400 upgrde

    Hello guys,.

    I want to thank all the people in the forum, that we provide solutions and always good advice.
    Regarding my question, I hope it won't be so boring.

    I have a Toshiba A100-906 and I think to buy a new external drive.
    I'm between Seagate and Hitachi. You can work on them in the links above.

    [Hitachi | http://www.hitachigst.com/portal/site/en/menuitem.9958814a08a37d75797ecae2eac4f0a0/]

    [Seagate | http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=mod_ST9200420AS&vgnextoid=cb31213b5a5e3110 VgnVCM100000f5ee0a0aRCRD & vgnextchannel = c021a47948a 3d010VgnVCM100000dd04090aRCRD & reqPage = model]

    What is the best for your opinion?

    Thank you very much for your time and I'm truly sorry once again for my annoying messages.

    The two hard drives seems to be not not a bad choice.

    Both are supported the same size (200 GB) and speed (7200 RPM).

    So I would recommend taking the cheaper ;)

  • Drive HARD recovery failed, Qosimo does not start with BOOTMGR is missing

    Hi all

    I recently used the Toshiba HDD Recovery thing to restore my laptop to factory settings, while he was doing this he popped by saying: she didn't, I rebooted and boots up logo Toshiba then comes to a screen with just BOOTMGR lack ctrl alt delete to restart. Anyone know how I can fix this problem so it does not once more?

    Laptop is Toshiba Qosimo X 500-149

    Thank you
    Harry

    Hello Harry

    HARD drive recovery image is screwed up and you will not be able to start over. Only way to install the Toshiba recovery image is to use the recovery DVDs. You have created a following Toshiba Recovery reminder?

    Here is the original post of callback:

    + Important INFORMATION +.

    + Your system is equipped with a hard drive recovery system. If you need repair your computer in the restaurant to original factory State, you can do so directly from the hard disk (press F8 when you start your computer, choose "Repair your computer" and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

    + * Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator' to ensure that you are able to restore your computer to the original, factory-installed state even if your computer is seriously damaged.* +.

  • Looking for 250 GB drive hard Hitachi DV9820US

    My laptop has 250 GB hard file to 5400 RPM Hitachi. is there a list of the Hitachi hard file templates that can be used as replacement for the original hard file?

    Hello

    Any reliable band must, I bought a 750 GB 2.5 "Western Digital black before Christmas for $175 (be cheaper now, no more floods in Thailand). I'm happy with his performance.

    Kind regards.

  • On the desktop HP Pavilion p7-1110, are you able to adapt several drive HARD internal inside the case?

    I already know desktop HP has a problem where your were not able to adapt hard drives inside the it (something about a cage, picky HP or any other reason)...

    I went to Staples/Best Buy/Office Max/Office deport and no one seemed to know, I had a couple of even opening the case of the employee, and I see different areas (of 3 total), where it SEEMS that you can, there was even a LABEL that says HARD drive, so I suppose it's possible... but that's the point of sale , so before buying the office tomorrow, I want to confirm that you CAN hold at least 3 hard disks inside.

    Wouldn't buy and undergo a 15% restocking fee.

    Matt, welcome to the forum.

    Yes, there are berries of disc 2-5, 25 "and 2-3, 5" bays of drive.  Now, there may be other readers in some of them, but those that are vacant will hold a reader.  Here is the Product Specifications page for the computer.

    If your problem is solved, please click "accept as a Solution.

  • OMIVV 3.0 & Dell R630 Bare Metal deployment error: apply ISO has failed, the Exception occurred * servicetag *.

    Hello

    We try to use OMIVV on a new deployment of R630 Dell servers with dual deployment ESXi 6 SD card.

    After deployment is running the server restarts but does start the ISO, iDRAC IP is in another network to OMIVV but there is no restrictions on communications between network iDRAC and the OMIVV box.

    Looking at the firewall no attempt is made to connect to the iDRAC network file sharing, but there is a small amount of comms to OMIVV box.

    No traffic is blocked.

    This doesn't seem to work at all and the information about why a failure has produced are non-existent.

    Everyone sees these questions?

    Thank you

    Please make sure that the IP OMIVV eth0 network address is available to the iDRAC network IP address and try to deploy the hypervisor.

Maybe you are looking for