Diagnostics of Lenovo - standalone boot works? not!

Similar Questions

• Lenovo x120e keyboard works not properly

  I have a Lenovo x120e, I bought a couple of years. Last Friday, I started to have problems with the keyboard. The first question was that the computer was save my CTRL key was pressed continuously. A single reboot did not fix this. However, by using the onscreen keyboard, I could get the computer to recognize possibly CTRL key was indeed not and my keyboard seems to work correctly again.

  However, from Sunday, I started having new problems and have not been able to solve. Specifically, the keys g and h do not work (although sometimes, if the onscreen keyboard is up as well, they will register as 5 and 6, respectively). Other keys around the Board work not (apostrophe, 5 and 6, some function keys). The on-screen keyboard works perfectly fine, as does a USB keyboard (I currently use).
  I tried the following, and none of them have helped:
  (1) virus and malware scan - nothing came (analysis complete, not just "fast")
  (2) check the performance of the equipment (an OEM utility) - no problem
  3) updated keyboard driver
  (4) uninstalled and reinstalled the keyboard driver
  5) restore to a restore point Windows before initial issue last Friday
  (6) restart in Mode safe without the attached external keyboard - same keys always had the same problems.
  So now I wonder if it's a hardware problem or a software (driver or OS) one. As I see it, my two possible options are:
  (1) If a problem with the hardware, at least try to clean and if necessary replace the keyboard
  (2) the software, wipe the computer and reinstall Windows. All my data is stored externally, while it would be annoying, is not a major issue to do this.
  I want to just make sure you choose the right course. Someone saw in which of them is most likely necessary remedy. Or if I missed a possible way to fix this without one of these last ditch effort, I would be grateful for more information.
  Thanks to you all.

  Hello Andrew,.

  I would agree that it's a hardware problem. At the same time, if you want "good" do an OS reinstall, you have nothing to lose but some time and effort.

  Kind regards

  BearPup

• G580 (20157) Lenovo usb boot does not not after installing windows 8

  Hello

  I have lenovo G580 model (20157). previously I had installed Windows 7 and Ubuntu 12.04 without problem. Today, I decided to go for windows 8.1. is it installed without any problems (no legacy mode UEFI) perfectally and works very well but ubuntu live USB is not initialize when I select Boot from USB windows 8 starts. I really need Linux in my laptop. Could someone help as soon as POSSIBLE.

  Hello

  Can try you other media, Imean another model may be different from the flash player / brand see if that will make a difference with the boot process.

  Thank you

  Solid Cruver

• lenovo ear phone works not my k900

  I am facing problem with my K900, once is to connect my head phone - does not work, I tried with several other headphones don't work, well want to let me know the solution

  regadrs,

  Madhu

  Thank you, yes the problem got solved Member suggests to restart the mobile and solved the problem.

  Kind regards

• Pro 608: HP 608 Pro will not boot-Boot device not found

  I got my new Pro 608 and installed my software after upgrade to Windows 10. Do okay, but the next day, nothing works!

  Keep saying that Boot Device not found!

  Not sure but it could be HP shield encryption does not work well? now, he cannot read the HD? or HD shot?

  I tried to restore default - but still does not work. Now other bios diagnostics no longer work. That is to say he's corrupt!

  Tried to update the bios, but doesn't seem to work. The bios still say 7/2015. I tried to update the bios 9/2015. Also used 7/2015 bios, bios Diagnostics but still does not.  I use a USB port and a connector USB Belkin C - I think not that it really is booting from the USB key to install the Bios.  I set the Bios to activate the firmware-C update.

  Sue, the best thing you can do since it is a new Tablet is contact HP Support directly for warranty repair.

  Most likely, they will replace the unit.

  Contact HP worldwide | HP® official site

• All of a sudden my computer when I turn it on says Boot Device not found.

  OT:Boot Device not.

  All of a sudden my computer when I turn it on says device not found Boot, please install an operating system on your hard drive, hard Drivr - (3F0), F2 System Diagnostics. My cd/dvd does not work, but I have a flash drive and an external hard drive with the recovery on this disc but it does not start similarly access flash or external. F10 boi configure options to no effect. Help me please

  Hello

  Since then, will not start to any device, it's a hardware problem. If you need the help of the
  Manufacturer of the system or a real computer store (that makes its own service in the workshop).

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• 15 - p030nr: Boot Device not found

  Need help on how to fix a problem where it says "boot device not found." He worked to find one day and the next time I turned on the computer, she appeared with this error message. After reading some things, it seems that it is a right of common mistake around the 1 year mark, but I don't know which is correct. Are there methods I could do to fix this problem.

  OK, if it was an old PC, my guess would be that the hard drive is a failure, but on a PC old of a few months, it is unlikely.

  However, it would be interesting to follow these instructions to check the hard drive:

  Presume withdraw OK, what might work is booting from CD or USB and running CHKDSK to see if this helps to repair the file system.

  CHKDSK is the short name of a utility that provides MS that will do a check of the file system and attempt to repair problems.  A damaged file system may prevent your computer to start correctly and get to a Windows desktop.
  
  Because you can not boot from your PC, then you need to download one of the following options and follow the instructions it contains to make a bootable USB stick or a CD:
  (1) miniTool Partition Wizard
  (2) EASEUS Partition Master
  (3) assistant Partition AOEMI
  
  Once the media, boot from it and use the option to check the disk.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Secure boot is not configured properly to build 9600

  I've updated my Hp Pavilion g6-2231tx to win 8.1 and it shows on the desktop, Secure boot is not configured correctly. I went through the entire solution and when I went to the computer Setup utility by pressing F10 and configuration of secure boot, legacy support is disabled, but the configuration of secure boot is blocked that is to say, I can't allow it. can anyone help?

  The following has worked for me.

  Had the same problem, that is to say, Secure Boot has been blocked. Clicked on load Factory Default key HP and the Secure Boot option change was authorized. Using the system for the last half hour. No problem yet.

  At the idea of 12 of the Startup Windows 8.1 message subject message. Secure

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Windows-8-1-secure-boot-message/TD-p/3026291/page/2

  It took me all day to fix this. Never realized a simple upgrade would be this frustrating. MS could have tested a bit more before coaxing us to upgrade. I should have waited 6 months before the upgrade for all these wrinkles are ironed out.

• Lenovo USB G470 does not!

  Hello

  Just bought Lenovo G470 USB do not work properly,

  Deskjet printer continues to disappear and when I iPhone plugin to load - nothing happens, quite simply, it does not detect it.

  The drivers installed and the Device Manager wrote: works correctly

  It is enabled in the BIOS.

  Any help?

  I just noticed that for some reason, the Printer Spooler service has been put on "Manual" I changed it to automatic and everything is ok

• Pavilion DV7 6c50eb: Boot Device not found

  Hi all

  I just change the HD of my laptop and after booting with the Win 7 DVD and install the operating system, I get this screen "Boot Device" not found.

  I am able to boot with the DVD, but I can't the normal HD boot.

  This is a new HD, it's all clean and working, I re-install after the first failure but still the same issue.

  Please let me know your thoughts

  Thank you very much

  FX

  I change the port on the motherboard, everythings works now... I believe that the port was not active and I have found no opportunity to change the option in the bios... duration of the other port have solved the problem.

  See you soon

• Boot Device not found please install a hard disk operatong system

  Boot device not found please install an operating system on your hard drive

  Hard drive (3F0)

  The F2 System Diagnostics

  For more information, please visit

  \go\techcenter\startup www.HP.com

  When a m do diagnostic tell me

  Smart check: not installed

  Long DST: not installed

  I buy in may 2013

• SIRIUS Internet Radio Media Player not working not properly because Windows update installed on my PC

  My Sirius internet Player multimedia radio is not working properly because Windows updates are installed on my pc. updates KB971486 KB974455 KB974571 KB975467 KB975517 KB974155 KB976525 KB974470.  Tested internet radio/media player for sirius on another computer and there is no problem.  Have tried all of the fixes recommended by sirius... This update of windows seems to the source of the problem.

  Does anyone have an idea with security update could be the cause of the problem?  Should I uninstall this?  If I find one that is causing the problem, how can I block it to move again?

  Thank you

  Hi Smwall,

  Welcome to the Microsoft Answers site!

  Do you have a particular error when you try to play?

  Method 1:

  You can try to start check and clean boot if the problem persists. Clean boot boot will help you know if all the background programs conflicted with the player. To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Method 2:

  You can try to uninstall the updates one by one in the windows update window and check if the problem persists.

  To uninstall the updates from windows update:

  1. open installed updates by clicking the Start button.

  2. click on Control Panel.

  3. click on programs

  4. under programs and features, click view installed updates.

  5. click on the update that you want to remove, and then click Uninstall.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more details, visit the below given link:

  Remove an update

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  Method 3:

  Alternatively, you can hide the update, which does not allow the player to play.

  Follow the below given steps:

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. do one of the following:

  ·         Click the link that tells you important updates are available if you have some updates to hide.

  ·         Click the link that tells you optional updates are available if you have optional updates to hide.

  3. Select an update that you want to hide, right-click, and then click hide update. Do this for each update you want to hide.

  4. click on OK.

  For more information about Windows Update troubleshooting visit the below given link:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 8150 printer does not print error: Re-installing the printer, unplug the USB and power and re-boot do not solve the problem

  Original title: hade 8150 printer does not print

  Under Vista Home Premium with all updates. The printer is a Photosmart 8150 H - P, which worked well for a few years. Now, when you send a document, for example, a Test page and looking at the queue, I immediately get an error. Re-installing the printer, unplug the USB and power and re-boot do not solve the problem. Grateful for any ideas. Thank you

  Hello

  (a) don't you make changes to the computer until the problem occurred?

  (b) when was the last time it was working fine?

  (c) you use a network printer or local?

  I suggest you try the steps below and check if it helps

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information is helpful

• Error message is Boot Device not found, Hard - Disk (3F0)

  Hello!

  I have PC HP Pavilion dv6 with operativ system windows vista Entertaiment. I got an error as Boot Device not found. Please install an operating system on your hard drive. Disk-hard (3F0) Recovery does not work and received the error 100a

  Please help me

  Kamal

  It seems that the hard drive has failed and needs to be replaced. Laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 320GB hard drive you can use a 500 GB hard drive but not a hard drive of 250 GB.

• Cannot boot from CD - DVD in LEGACY mode - NO Secure Boot UEFI NOT

  You just bought an Optiplex 7010 minitower with Win 8 Pro 64 - bit, 8 GB of RAM, 500 GB HDD and an Intel i5 processor 3470.  Now he has BIOS version A16.

  It is normally ON UEFI and Secure Boot on IT and F12 at startup does NOT normally display the CD-DVD as a boot option.  OK - no problem.

  However, if I reboot with F12 and select UEFI OFF (meaning WE legacy) and Secure Boot SHUTDOWN and reboot, then F12 DON'T show me the CD - DVD as a startup option, but if I actually try to boot from a bootable CD, I get an error message.

  I practiced with two CD bootable - a Knoppix I did on a XP machine an Aomei Backupper I did on a Win 7 machine.  These CD working as in my old XP machine boot CD, and the CD of Backupper of Aomei worked someone else machine Win 7 Pro 64 bit.

  What's wrong?

  Again, please let me repeat that I am trying to boot from the CD-DVD AFTER I have turned OFF UEFI, turned on the legacy and off Secure Boot.

  Thank you.

  Speed - although you predicted, I am amazed at what I did today.

  I bought a second hard drive (in white) and installed Win 7 Pro 64 - bit SP1 on it.  (I unplugged the first hard drive which has my Win 8 Pro 64-bit.  (Later to figure out how to dual-boot - no not yet for that.)

  What struck me is that I have installed SP1 for Win 7 Pro 64-bit while my BIOS is UEFI - it's ON UEFI and Secure Boot off.  (Enable Legacy ROM is enabled.)  BIOS is the Windows Boot Manager.  The Win 7 Pro 64 - bit SP1 DVD ran perfectly on my CD - DVD unit - no problems of any kind.  The machine has restarted several times, as I adjusted it settings and added the resource of Dell Media CD drivers.

  Disk Management displays only two partitions - a little with the legend "Healthy (EFI System Partition)" and then my C:\ drive, which is indicated be NTFS and 'in good condition (boot, Page File, crash dump, primary Partition).  The properties for the entire drive 0 said "Partition Style: GUID Partition Table (GPT).

  Now - is it good or bad?  If one day I try to dual-boot, what is incompatible with the four partitions on my hard drive to win 8 (now offline)?  Install this fake Win 7?

  I'm even more amazed than the Win 7 Pro 64 - bit auto installed SP1 with a product key that is different from the product key for my Win 8 Pro 64-bit.  The Dell OEM Windows 7 installation disc done by himself - I don't have to enter anything.  Which is good news for a future dual-boot, Yes?

  I have NOT yet connected to the internet.

  Now, when I unplugged my hard drive of origin WIn 8, I disconnected the Sata data cable and used for the new hard drive Win 7 added.  If the new hard drive is connected to data SATA motherboard even as the drive of origin 8 Win.  Well, at some point when I use two hard drives, one of them should be connected to another plug SATA on the MB - but not yet.

  Well... How do I fortunately to this stage so far?