Diagram shows empty, even if it is not.

Similar Questions

• T450s - 2nd DIMM shows empty and cache-battery is not found

  Hello

  My Thinkpad T450s of September 2015 not found my second RAM installed.

  For months, everything was fine and the t450s was very fast, but from one moment to the other, it was very slow.

  TIS was a missing RAM stick... She went from 12 GB to 4 GB.

  Also if I supported something ditch USB when the laptop is the turn of and I turn it on, it can not find the installed batteries (even when it is not powered by AC)

  Someone who knows how to fix this?

  Assuming that your machine came with a warranty, a service call.

• Hi HP Touchsmart screen empty even not the up cursor shows, please help

  I have a HP touch smart pc, when I got to turn on tonight looks like it's going to load, but just gray screen, nothing shows at all, the cursor is not visible. I tried pressing F8 to try to start in safe mode, but nothing showed up, I then tried to load the backup disc, I could hear the disc running but nothing appears on the screen.

  I would be grateful for any ideas,

  Thank you

  Hello

  I thought that I'll let you know the results of the trip to the shop for the TouchSmart.

  I didn't get no help from HP at all when I sent them an email detailing the problem, had to take the machine in the store to check out them, the opening to the top of the machine, it was found that the video card is attached to the motherboard, so to buy both, and because it is a specific element would be only able to be purchased at Hp is. Consulted on the Hp web site at a price that my machine has now been abandoned, so no parts available!

  I only got 2 years Pc, on the audit of the hp forum, it seems that it is a common problem for this touchmart this is perhaps the reason why they stopped them, no help to someone else with this problem that I don't know, but maybe I do the job for anyone else having the same problem.

• Build another Panel, Format Blu - ray disc information shows that 12.45 GB is used and 12.55 GB is free, even if I had not started construction. Why?

  Adobe CS 5.5 S & T Ed MC. Win7Pro64.

  Video clip Type: MPEG Movie (AVCHD Progressive)

  Image size: 1920 x 1080

  Frame rate: 59.94

  Source Audio Format: - compressed - 48000 Hz 6-channel

  Project Audio Format: comma floating 48000 Hz - 32 bit - 6 channels

  (A few clips audio is stereo)

  Average data rate: 3.0 MB/second

  Format of the pixels: 1.0

  Photos JPEG 16MP.

  The Build Panel still , Blu - ray format, the Disc info shows that 12.45 GB is used and 12.55 GB is free, even if I had not started construction. Why? I expect 0 used and 25 GB free. Audit project revealed no problem. I don't know what info to provide an informed answer, but here is some info:

  First Pro CS5.5.2 to CS5.1 again project: ()after making 1.5 h ) dialog box Adobe Dynamic Link - send to still - new project: settings: Mode of creation: Blu - ray.
  Default conversion settings... Automatic transcoding: Max A / V Bitrate 40.0 Mbps (I chose it arbitrarily) video transcoding: Codec H.264 (this will provide a higher than MPEG-2 definition?); Dimensions 1920 x 1080 (what I want); Frame rate 29.97 (selection 59.97 reduced dimensions 1440 x 1080); Audio transcoding system Dolby Digital (PCM would provide better fidelity?)
  

  On Panel project still, two files have appeared, Types: chronology and Premiere Pro sequence.

  I created no menus and no subtitle track.

  On the Timeline panel, the end prproj Action is Stop, length is 14; 58; 59, 00, remote Menu is back to the last Menu. Chapter 1 (the only chapter) link is not defined. Properties Panel, in and displays all zeros, end Action is not defined.

  I burned a BD-R disc writing speed 8 x (2 hours to transcode) and it is only half used. He played very well, but I had 12.5 GB, 2.5 X instead of 25 GB, 5 X that of the DD definition. What must be corrected to get the X 5 full definition?

  Note any other issues such as the length of time transcoding?
  Thank you, Don

  That's the prediction of yet which is used and free.

  The automatic can be applied to your PR sequence (i.e. the "asset" will get transcoded), but you must look at the setting of transcoding for the asset (ook in the project Panel to the right for the setting of transcode Blu - ray). I'm not sure you can max a Blu - ray player with only an hour of material. How is it?

• Firefox shows no ads, even if I have not activated advertising blockers

  Is there something with my Firefox. It does not display ads even if I have not activated advertising blockers.

  I would like to support some of the sites supported by advertising, so it is a very big problem for me.

  Tried updating Firefox and create a new profile, nothing works.

  What can be the reason?

  After you disable tracking in all: config, everything works as expected.

  It seems that the settings do nothing. Certainly a bug, I hope it will be fixed soon.

• New ink cartridges show empty

  Hello

  HP Photosmart C6380 All in one

  Despite the purchase of authentic HP ink cartridges from a reputable supplier, the ink is not recognized or shows empty as they do now. Eitherwayi unable to print. I bought several and still get the same message. I installed also the latest version of the software whicg was a nightmare in itself, I have vista on a machine, and there is no way I can load the software.

  I understand that manufacturers often include a date of birth on the chip in the ink, I thought was illegal, because it requires you to buy more ink, even if the printer ink is still usable. I tried to call help HP but they wanted to charge me for technical advice, hmm I prefer tray to the printer and completely avoid the HP products.

  I don't know if there is a solution to this or the printer / software is completely unsuitable for the use nor HP are trying to scam people with ink through illegal chipping.

  Hello world

  OK, if you started using this cartridge is it a date of guarantee on the cartridge. If the cartridge is considered defectiver we can replace the cartridge, as long as it's still in the warranty period on the cartridge. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  

  S set of standard print samples:

  HP publishes page performance data based on the industry standard to measure yields (ISO 24711) cartridge. Under the ISO 24711 testing guidelines, a standard set of 5 8 1/2 x 11 pages are printed continuously until the cartridge reaches end of life. For various reasons, these test conditions may not reflect what you encounter in everyday use. Standard ISO page yields should be used only as a starting point for comparison purposes, and not to predict actual performance, you'll get your cartridge and HP printer. Actual performance varies considerably according to the content of the printed pages, frequency of printing and other factors. Click here for more information on volume of performance and the ink on the pages. Click here for more information on the use of ink.

  

  What I need to do is print the printer status report just until you are ready to install your new game cartridges and then scan. Send this page to me using the line attachments in the message box. Once you begin to receive messages that the cartridges are low or need to be replaced I need to print you another status report, and analysis that he be sent to me. Once we have the front and after the reports, we can then take a look at what is being printed and how real pages you had with the cartridges. Let me know if you have any questions.

• Display of the music playing on the lock screen, even if its does not and the application is closed

  Even if I'm not listening to music and I closed the app, why he has begun to show that if it plays on my lock screen, this also happens intermittently and not all the time.  Also, I noticed on my lock screen when music does not appear I have the music symbol in the lower left corner of the screen and the camera symbol at the bottom right shows that I never noticed before, normally only the symbol of the camera?

  I believe that this is part of the suggested Apps feature. To turn this off, go to settings > general > Handoff & Apps suggested under Apps suggested, turn off installed Apps.

• Safari quit and show empty historical. What can I do?

  Safari quit and show empty historical. What can I do?

  Force quit.

  Press command + option + esc together keys at the same time. Wait.

  When the Force Quit window appears, select Safari if not already.

  Press the button to leave the bottom of the window.   Wait.

  Safari stops.

• Regulation the screen showing empty in iphone 5 s

  My settings > General > regulatory screen showing empty (check screenshot below) is there someone tell me why it's like that

  

  It may be a bug or something like that. Try restarting/resetting your phone. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• The battery shows empty when battery full icon

  Original title: laptop battery

  Hi I have installed a new laptop battery folling the calibration it according to the instructions. the battery shows empty when battery full icon

  someone help please John

  This means that the charging system in your laptop is broken and needs repair or replacement.  Since you have replaced the battery, you know that is not the problem.

• Why my computer is running slowly even when I do not have a virus?

  I find the virus and there is none. but my computer is very slow

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Why do I get an empty folder named SightSpeed records not appearing in the folder My Documents/libraries?

  I get an empty folder named SightSpeed records not appearing in the My Documents/libraries folder in Windows 7. I have not all Dell products. I use Windows Messenger and Skype to make video calls (VOIP). Why this Dungeon appear even after I delete it?

  Hello ThomasSpero,

  It is the response that was returned by Logitech Forums:

  16/10/2012 09:00

  Hello spetho2001,

  The empty SightSpeed records record is a direct result of your Logitech Vid installation. The file is harmless and will remain empty unless the function to record video calls is implemented in Vid.

  enation815

  ---------------------------------------------------------------------------------------------------------

  It seems to be just a record created and will have nothing on the record unless you use the video recording option. You can test this information by recording a video call.

  I'll assume that the empty folder is not a problem.

  I hope this helps.

  Marilyn

• I need to convert PDF to Excel, however, the columns and tabs make many merged cells and the number of columns empty. In addition to not separate the columns properly, I see many not separate lines together in the same cell. I think same as Adobe Acrobat

  I need to convert PDF to Excel, however, the columns and tabs make many merged cells and the number of columns empty. In addition to not separate the columns properly, I see many not separate lines together in the same cell. I even think that Adobe Acrobat Pro DC has limits. There is no way to set what points in columns to force the column break? Or create several columns that are unnecessary? How column in Excel, size fixed when import us text and define where breaks have columns of text?

  Google Tradutor para empresas:Google para appsTradutor sitesGlobal market Finder traducao Toolkit

  Acts traducao Instantaneasobre o Google TradutorCelularComunidadePrivacidade e TermosAjudaEnviar comments

  PDF does not contain columns, lines, formats, styles or other aspects of word processing or spreadsheet file formats.

  This is because the PDF is decidedly not a file format of word processor or a spreadsheet or something 'like' one of these.

  (see ISO 32000 for what PDF "is")

  Which allows to optimize the export of the content of a page PDF is to start with that tag well formed PDF (ISO 14289-1, PDF/UA-1).

  Without that export is what it is and we performs the cleanup of any necessary content using the native application for the export of files (MS Word or Excel).

  Be well...

• Why cfstat still poster reqs qued even when it is not all traffic to the site?

  I try to use cfstat to help understand some performance issues with our production server. Its CF 10 Ent on a Windows 2008 VM. I'm also 10 ColdFusion installed on a local Windows VM.

  I run cfstat with a 1 Refresh second on the local production and the VM server. The local VM Reqs Q column ' ed shows a constant 10 even if I'm not hitting all sites on the server. The production server shows a constant 20-Reqs Q'ed and some Run Reqs'g.

  Is this normal? I have to make some adjustments to the CF or the JVM?

  Thank you

  Hi Phil,

  CF10 CFSTAT seems not to be as convenient as CF9 or earlier version.

  Requests queued seems to be displaying the value of tomcat for minSpareThreads connector. Tomcat minSpareThreads is the minimum number of threads still kept running. If not specified, the default value of 10 is used.

  HTH, Carl.

• Hi Sir, I am jyotheswar, recently, I downloaded firefox version 26 to 45 .when I load a PDF showing well in 45, but in version 26 show empty.

  Hi Sir, I am jyotheswar, recently, I downloaded firefox version 26 to 45 .when I load a PDF showing in 45, but version 26 show empty please help me...

  Javascript might not be enabled try which then allows him to try