Dial-up error with Usb Modem

Similar Questions

• Satellite M645 - Hang with USB modem

  Need help, my Satellite M645 (PSMPML - 00H 003) always hang using with USB specially if you use USB modem.

  Help

  Hey Buddy,

  Can you post more information about this behavior? The entire notebook to hang or freeze if you connect the USB modem? Is it so if you connect a USB mouse or a USB?

  What operating system is currently installed?

  If you have USB problems I recommend an update of the chipset driver. Have you ever done this?

• Equium A60-152: cannot open Web pages with USB modem broadband

  Hey man
  Bought a second hand Equium A60-152 today.
  Everything seems to work fine, but when I connect to the net using my modem high speed external USB I can't open web pages.
  It of the connection ok but does not do anything when it is connected.
  What I have to disable the built in modem so it can work properly?

  Long live man

  Waigy

  Hi Craig,.

  You should not have to disable the built-in modem in order to use your connection high speed USB.
  In fact, I usually recommend having both connections defined (a normal broadband and PAYG dial-up version). How can I access my ISP even when I'm somewhere that is not allowed to wide band.

  I guess that you can access your normal home page of ISP correctly? In which case I would suggest that you check the settings of your browser and your virus protection and firewall options.

  Kind regards

• Driver for Keysight 34461 A DMM instruments works with GPIB, errors with USB

  I try to remotely control a DMM of 34461a Keysight using the driver of instruments located here:

  http://sine.NI.com/apps/UTF8/niid_web_display.model_page?p_model_id=21589

  The pilot of the aircraft works like a charm the DMM is connected via GPIB, but it error when connected via USB.  I've isolated the problem to "Default Instrument Setup.vi".  When this VI is called in the case of USB, the device is left in a State which translates by a later call a time-out at VISA Read.  The only way I found to get the instrument still talking after this occurs error condition is turned off.  I have an another 34461a with the same behavior, is probably not a hardware problem.  I can successfully run the example 'Agilent 3446 X series Acquire Single.vi' via USB if I remove all calls to "Default Instrument Setup.vi.

  Everyone knows this unit or a similar problem?

  I use Windows 7, 2014 SP1 LabVIEW, NI-VISA 14.0.1 and GPIB-USB-HS + (OR-488. 2 14.0) when using a GPIB.

  Since the Readme file

  3 known issues

  Agilent IO Suite must be installed to use the USB interface.

• c:\windows\system32\storprop.dll error with USB

  I had a problem with my USB flash drive (memory stick) that I bought recently.  I used a Sandisk U3 Titanium 2 GB flash drive with U3 technology.  I bought a Sandisk Cruzer 16 GB drive in addition to the another flash drive.  Now when I plug the new "Cruzer" it displays the following error message

  DEVICE SETUP ERROR
  Windows could not load the installer for hard drive.  Contact your hardware vendor.

  After clicking OK, the box NEW HARDWARE FOUND is displayed and when you select this option to locate and install the driver (recommended) it immediately returns the following:

  newdev.exe - incorrect Image
  C:\Windows\system32\StorProp.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  From there, you select OK and he repeats the MISTAKE of the DEVICE INSTALLER and then displays the NEW HARDWARE DETECTED again.  This time, it says to insert the disc that came with the device.  When you select that you do not have the disk, it asks if you want to find a solution.  Then he said: it could not install your SanDisk Cruzer USB device.

  At first I thought it was a problem with the "Cruzer" so I called SanDisk and crossed their tech support and finally, he recommended that I have to contact Microsoft as it was not a problem with their device.  This seems to think as my U3 device still works fine.

  Today, I went to plug my new external hard drive Seagate through my USB port and has received the exact same guests and error messages.

  I noticed also about a month when I inserted my SD card in my SD card reader, which is built into the laptop, I got an error message.  I went back today and he reinserted and received the same error messages that I described above.  I'm guessing that all of these mistakes probably revolve around the c:\windows\system32\storprop.dll file but I don't know what to do about this.  I tried looking online to find an answer, but could not find anyone else with similar information.

  In addition, once all the error messages are recognized, then the devices can be used, however for the SanDisk Cruzer, it you cannot use the software of the U3 technology.

  Anyone who can provide any assistance with this would be greatly appreciated!

  Hi not2l84u2,

  I found the following post that is similar to your problem with a possible fix:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/a95812e8-6dec-4A9A-9277-0684f047fe34

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• LaserJet 4000 printing error with USB/parallel interface and DATA light on at all TIMES

  Laptop Dell Vostro 3700, Windows 7/32, Laserjet 4000, connected via the USB interface cable / parallel on USB001. Interface drivers and printer installed automatically after starting the update of Windows PC.

  Single document print OK.

  Document of several pages: printer data LED flashes then REMAINS ON permanently. Printed front page sometimes, sometimes not.

  After some time, box status Control Panel/print poster printer fault and a yellow exclamation point appears on the printer icon.

  No possible mistake OK with MS print Fixit. No other printing possible before initialization of the PC and then to new as shown above.

  Same printer connected via a parallel cable that is normal for old PC Windows 2000 print OK.

  Help, please!

  SOLUTION FOUND!

  A SOLUTION THAT WORKS: add only DC powered USB hub and connect the printer to one of the ports of the hub-s. Let Windows install the drivers for the USB cable and printer and printing is perfect!

  It is that the laptop USB ports do not have enough current or voltage, especially if some other USB devices are connected to the laptop...

• Error message when connecting with wireless USB modem

  Dear Sir/Madam,

  I use the HP laptop with Windows vista operating system. I'm also using the USB wireless modem. But now, I had problem connecting with usb modem. I get ((erreur (6): could not get the string) message connecting with.) Kindly help me to solve the problem.

  Thank you
  Kind regards
  D.Yokesh

  Hi D.Yokesh,

  1. did you of recent changes on the system?

  If it is a recent issue, then you can try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.

  There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.
  I tried to connect my xbox to my computer to xbox live via the 3g router, but I was unable to. According to me, there is something wrong with the network card, since neither the wifi (wlan?) nor the lan connection seem to work.
  I harnessed connected my iPod, Xbox 360 and Nintendo DS for her, but not my computer. Please help me, what wrong with my computer?

  original title: problem with the map?

  Hi GustavTak,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?

  Try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

• Impossible to install the new 4 G USB modem error lack driver bwbcmwin32installer_2.10.6.msi

  Original title: lack of pilot bwbcmwin32installer_2.10.6.msi

  Hello community!

  I encountered this problem: (I'm in Oz)

  all by installing the new modem USB 4 GB (above the required windows driver error message) wouldn't load the Device Manager software.

  I found later talk to telco support that the previous version of the software (3G network) must be uninstalled (not so advised in the documentation provided with the device)

  The next attempt to uninstall the old software has failed (what a surprise displayed the same error message as mentioned above)

  Tried to use the old device and now it don't work either.

  Y at - it a good soul out there that will help please (it's no surprise that telstra has been giving me the run around for 2 weeks now)

  Hi IVsWebBrowserUser,

  Welcome to Microsoft communities. The problem description, I understand that you are not able to install the new 4 GB USB modem. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         The question is limited to this device?

  Follow these methods.

  Method 1: Try to use the USB device to a different USB port and verify.

  Method 2: Try to use the USB device on another computer.

  Method 3: Follow the steps in the article.

  Advanced troubleshooting tips for General USB for Windows XP problems

  Let us know if you need more assistance.

  Thank you.

• Error 1720 when installing software for usb modem

  Hello

  So I'm having a problem installing software called mobilink for my novatel usb wireless modem, actually it's not mine to someone else.  When installing the software directly from the usb port it will stop and say Error 1720.  He had the same problem with a modem former usb from the same manufacturer, but I managed to download the software directly from the manufacturer's website and installed without problem.  With the recent usb model, they do not offer the software online.  The Windows Installer is updated and saved, is this a problem with windows vista or any associated windows? It seems to happen during the installation of the usb modem.

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://support.Microsoft.com/kb/2438651/en-us

  It will be useful.

• Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  N ° you need a computer logic board which has built in Thunderbolt.

• Satellite A10: Modem - no dial tone error 680.

  Hello

  Seems to be a common problem search the ends of the net even if I have to find a solution.
  No dial tone error 680. Satellite A10 running Windows XP SP2.
  Interviewed modem-It's ok.
  Check wait for the tone. still not connect.
  Have tried different telephone cable, ISP, reinstall the drivers, control of the region (UK).
  Check the malware, corruption of the registry. Nothing there.
  Reinstalled from the Toshiba restore CD. Still the same problem.
  The BONES of config system permit
  Check for driver updates. None.

  Manage devices only show and COM ports if Port Modem Properties settings show that it is at COM3. have tried to change to COM4 - makes no difference.

  What is the solution?

  Hello

  This error almost always occurs because the computer cannot hear regular ringing when it picks up the phone line to dial through the modem.
  Unfortunately, there is no standard solution for this problem.
  Did you check that the modem is plugged into a phone point in the wall?

  In addition, check out this site for information:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;326681&product=winxp
  http://support.GCI.NET/KB/kb74
  http://support.earthlink.NET/Mu/1/PSC/IMG/walkthroughs/windows_9x_nt/dialers/dun_1.3/2267.PSC.html
  http://www.Xtra.co.nz/help/0, 6156-1296801, 00.html

  Good luck

  Good bye

• SP A10 - Error 633: the modem is not installed or configured for Dial-Up

  I've already reformatted the hard drive and the utility CD to reinstall the modem driver. Anyone got tips on how to solve the problem? An external modem would solve it?
  Either way, it's a satellite pro A10

  Hello

  If the HARD drive is formatted, use the recovery CD and reinstall the OS. After that, the modem must be recognized and properly installed. After that, configure Dial connection and check the modem. If the modem is not defective, it should work.

  The strange thing is that there is Error 633 which means: the port is already in use or is not configured for remote access remote calls.
  Please check this interesting site http://www.modemsite.com/56k/duns633.asp.
  If there is no success please write again.

  Good bye

• Satellite U500 - problem with Windows 7 and HSDPA USB modem

  Hello
  My wife recently purchased a Toshiba Satellite U500, that came pre-installed with Windows 7 64-bit.

  A few days later, I bought a modem high-speed HSDPA USB by Alcatel. The problem started immediately that we plugged the modem, that drivers would not install.
  Then I went to the Web of Alcatel site and found the drivers for windows 7 for her. But then we hit another road block since now the drivers are installed and it does not detect the modem, but whenever we try to connect to the internet, screen flickers at the connection for a moment and then disconnects again.

  I found cela a lil strange so I tried to connect using my own pc which has a 32-bit Windows 7 and it works fine there.
  It is the same for a machine that still had Windows XP. Makes me think its something to do with 64-bit Windows 7 itself. Could someone help please?

  Thank you and best regards.

  I don't think that someone here can help you with this problem. You will be very happy if someone on this forum has exactly the same model of laptop including same USB modem.

  In my opinion, you have two options: either you can clarify this point with the support of Alcatel (they have enough experience with own products) or with people from the nearest Toshiba service provider service.

  Have you tried to test the features with the Win7 32-bit version?

• Satellite L505-112 - 31 error code in device USB modem Manager

  I have a USB stick modem: Huawei e172. I downloaded the latest drivers for Windows 7 64 bit. I have a Nokia n95 with firmaware update to version 30 and the latest drivers...

  Is causing me this problem in Windows 7:
  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  To start I have the problem with the huawei e172. After the update of the Nokia n95, I have the same problem with this phone.

  Excuse me for my English but I'm from the Italy.
  Technical support Microsoft tell me that the problem is on the Toshiba Windows 7. In fact, if I try the modem usb stick on another pc with Windows 7 64 bit it works fine.

  Hello

  It's really hard to say what causes this problem on your laptop. Do you use the same drivers on the other PC?

  Are you running the factory settings or you have installed your own version?

  In your case, I'll try to update the chipset drivers on and BIOS. The two you can find on the Toshiba site.

  Alternative you should contact the manufacture of your USB modem. Maybe they can tell you more