DIAL-UP Modem is not working properly in the Satellite A200 - 1 GB

Similar Questions

• Touchpad is not working properly in the Satellite A200

  I have wired rather question for you, may be common.
  Touchpad on my laptop is not working properly, and I'm wondering someone can tell me what 'wrong with it. My problem is at the bottom,

  When I turn on the laptop, I can connect to the through the use of the touchpad, but after I logged in the only thing that I can move the pointer over the programs, but I can't double click or do anything else. When I double-clicked the icons it does nothing.

  So I thought I might turn off something by mistake, can I use the touchpad to connect.

  Can someone please tell me how to solve this problem or what I can bring to a service center?

  Hello

  If you can still move the cursor using the touchpad touchpad is not disabled.
  Perhaps a button configuration has been changed.

  Usually, you can configure the touchpad the touchpad settings.
  Did you check that?

  You can find the settings in the control panel-> mouse
  There should be an Advanced tab.
  Go ahead and check the settings of the advanced feature.

  Here, you can configure the simple buttons and also the touchpad.

  If you will not be able to reach these settings so I recommend reinstalling the driver for the touchpad again!

  Good bye

• CD/DVD is not working properly on the Satellite A200-1AI

  I have a Satellite A200-1AI but it can't find the CD/DVD.

  The operating system is Vista Home premium. The control panel highlights the problem that
  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  The CD/DVD is HL-DT-ST DVDRAM GSA-T20N ATA Device.

  Any ideas?

  Hello

  It's three different error messages Windows which could occur if the registry entries have been modified or damage.
  This can occur as a result of the application of part 3 or after deleting a record of program or a program DVD of CD recording, or after you remove a different program.

  Anyway, you have several options to solve this problem;
  Either you will reinstall the whole OS (this is not advisable ;)), either you will follow this ;) described Microsoft instructions here in this document:
  http://support.Microsoft.com/kb/314060

  Please post again if you have managed or not

• Synaptics touchpad is not working properly on the Satellite A100-635

  My synaptics touchpad is not working properly my mouse works very well but does not work in every corner of the touchpad for special functions.

  I tried to set it up again but it had no result, also I downloaded a new driver, but it had no results to. My buttons multimedia keys like play/pause or stop are not no longer works.

  These buttons/keys stopped working at the same time as the touchpad. Checked with NOD 32 pro virus and spyware with ZA pro ==> no results.

  Who can help me with this problem?

  Hi Jarno

  Do you know how many different Satellite notebooks have a series? Drivers and tools are not the same for each of them. Because of this you should also tell us that you have.

  According to your description, I can tell you: install OS using support and recovery delivered with factory settings, your mobile phone must be configured correctly.

• Keyboard does not work properly on the Satellite P100-465

  Hello
  Toshiba P100-465, I bought last month and discovered that if you press any key sound (especially the SPACEBAR or enter) between the upper right, it does not work.
  I never saw such a problem anywhere in any laptop. Please confirm if this is the case with all or should I get my keyboard replaced.

  I read this forum for a long time and I have strength to find a lot of comments about it. Because of that I think he cannot be serious and I recommend you contact the partner of service authorized in your country.

  By the way if you press the keys correctly (around using the button) I see no problem there but service can check properly and if problem described is a problem with the hardware keyboard will be replaced free of charge.

  Bye and good luck!

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• the trackpad is not working properly after the update to 10.11.4

  Hello

  I've updated my mac pro to the latest OS. However, the trackpad does not work correctly. Sometimes he strives to move the arrow but double click, drag, and all other actions do not work properly.

  Can someone help me out here? Is there a way to reactivate the trackpad or update driver for the trackpad.

  The trackpad is build-in bluetooth no one.

  Thank you

  There are two main troubleshooting steps I suggest to complete to start troubleshooting your touchpad is not responding. These steps are reset of memory NVRAM and the SMC on your Mac and the instructions for each can be found in the articles below.

  How to reset the NVRAM on your Mac - Apple Support

  Reset the management system (SCM) controller on your Mac - Apple Support

• FN key is not working properly on my Satellite P875 - 32H

  Hello world

  I have problem like many others, FN key is not working properly. Let's start from beginning:

  1. I bought my P875 - 32 H with Win8 64 bit and everything was allright.
  2. after upgrade to 8.1 probles issued many and most of them I solved it, BUT,
  3 recently, I found that the FN key works in combination with
  (a) f5
  (b) f6, f8 (only with media player works, with winamp does not work).
  (c) f12 (I turned off wifi via Control Panel, but the light still flashes),.
  (d) 1 and 2
  (e) or z (US keybord) - keyboard backligth on/off - I have try several solutions based on the forums (install the driver on toshiba support site) but without success. Throught BIOS I turn on backligth but I can not turn off without entering the BIOS.
  (f) space I've ever used this combination.

  I tried on the Microsoft forums, but there is no solutions.

  And another question
  Why my P875 - 32H model is not on the drop-down list on the toshiba support site?

  Concerning

  At first, I have to say that I hope that you have updated your machine following the instructions on http://www.toshiba.eu/innovation/generic/windows8_1-message/
  FN feature keys is controlled by specific tools Toshiba and you need to install or already installed are Toshiba system driver and utility of Toshiba feature key.

  FN + F5 key combination is for touchpad. Did you install driver touchpad correct?
  F6 and F8 are designed to work with media player. In the past (WXP) using small plug-in, it was possible to use it for Winamp. I think that something like that doesn't exist anymore.

  You know that's not easy to say to install this or that and everything will be OK. The feature keys FN is where several things work together.

  Please check the download page of Toshiba on http://www.toshiba.eu/innovation/download_drivers_bios.jsp and install all necessary drivers, tools and utilities for Win8.1.

• Button to navigate to another page does not not work properly all the time.

  Hello

  I'm just starting to explore the ADF, I use Jdeveloper 12.1.3.0.0 and integrated weblogic server that comes with the IDE.

  I just created a simple application with a welcome page called Main.jsf and then 2 task bounded, streams called SearchStudentsFlow and Studenloansflow, each workflow has a jsf page. The home page has a single button that sends me to the first task flow, SearchStudentsFlow and I can see is the page in that workflow, AwardsSearch.jsf. Also in the AwardsSearch.jsf page I have a button that takes back me to the home page.

  The first problem I have is that when I run the application starting at the home page button in the works of the great homepage the first time, the button send me to the AwardsSearch.jsf , but once I decide to go back to the homepage and then click on the button to go to the first task flow the button does nothing. This happens whenever I decide to return to the home page of any page in my project.

  Also, I copied the entire previous project into a new project and I decided to use the ADF security infrastructure in this new project to create a log in page create users and give them different roles and levels of access.

  I created some users who have access to all pages and all the streams, but when I run the application starts the login page and I login successfully and go to the home page, the button on the home page does not work.

  
  

  I don't know why the button sometimes works, but not of others and also I do not know why when I use the login page, the button doesn't work. I don't know if these 2 problems are related or not.

  
  

  This is my code in the homepage:

  <?xml version='1.0' encoding='UTF-8'?>
  <!DOCTYPE html>
  <f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
      <af:document title="Main.jsf" id="d1" binding="#{backingBeanScope.backing_Main.d1}">
          <af:form id="f1" binding="#{backingBeanScope.backing_Main.f1}">
              <af:panelGridLayout id="pgl1" binding="#{backingBeanScope.backing_Main.pgl1}">
                  <af:gridRow marginTop="5px" height="20%" id="gr1" binding="#{backingBeanScope.backing_Main.gr1}">
                      <af:gridCell marginStart="5px" width="34%" marginEnd="5px" id="gc1"
                                   binding="#{backingBeanScope.backing_Main.gc1}">
                          <af:image source="/images/NU_Logo_purple.jpg" shortDesc="Northwester University" id="i1"
                                    binding="#{backingBeanScope.backing_Main.i1}"
                                    inlineStyle="width:293px; height:197px;"/>
                      </af:gridCell>
                      <af:gridCell id="gc3" binding="#{backingBeanScope.backing_Main.gc3}" width="33%"/>
                      <af:gridCell id="gc4" binding="#{backingBeanScope.backing_Main.gc4}" width="33%"/>
                  </af:gridRow>
                  <af:gridRow id="gr3" binding="#{backingBeanScope.backing_Main.gr3}" height="10%">
                      <af:gridCell id="gc5" binding="#{backingBeanScope.backing_Main.gc5}"/>
                      <af:gridCell id="gc6" binding="#{backingBeanScope.backing_Main.gc6}">
                          <af:button text="Search Awards" id="b1" binding="#{backingBeanScope.backing_Main.b1}"
                                     action="goSearchAwards"/>
                      </af:gridCell>
                      <af:gridCell id="gc7" binding="#{backingBeanScope.backing_Main.gc7}"/>
                  </af:gridRow>
                  <af:gridRow marginTop="5px" height="70%" marginBottom="5px" id="gr2"
                              binding="#{backingBeanScope.backing_Main.gr2}">
                      <af:gridCell marginStart="5px" width="100%" marginEnd="5px" id="gc2"
                                   binding="#{backingBeanScope.backing_Main.gc2}"/>
                  </af:gridRow>
              </af:panelGridLayout>
          </af:form>
      </af:document>
      <!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_Main-->
  </f:view>
  

  And this is my code in the adfc-config. XML

  <?xml version="1.0" encoding="windows-1252" ?>
  <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
    <view id="Main">
      <page>/Main.jsf</page>
    </view>
    <task-flow-call id="SearchStudentsFlow">
      <task-flow-reference>
        <document>/WEB-INF/SearchStudentsFlow.xml</document>
        <id>SearchStudentsFlow</id>
      </task-flow-reference>
    </task-flow-call>
    <control-flow-rule id="__3">
      <from-activity-id>Main</from-activity-id>
      <control-flow-case id="__5">
        <from-outcome>goSearchAwards</from-outcome>
        <to-activity-id>SearchStudentsFlow</to-activity-id>
      </control-flow-case>
    </control-flow-rule>
    <managed-bean id="__4">
      <managed-bean-name>backing_AwardsSearch</managed-bean-name>
      <managed-bean-class>view.backing.AwardsSearch</managed-bean-class>
      <managed-bean-scope>backingBean</managed-bean-scope>
      <!--oracle-jdev-comment:managed-bean-jsp-link:1AwardsSearch.jsf-->
    </managed-bean>
    <managed-bean id="__2">
      <managed-bean-name>backing_Main</managed-bean-name>
      <managed-bean-class>view.backing.Main</managed-bean-class>
      <managed-bean-scope>backingBean</managed-bean-scope>
      <!--oracle-jdev-comment:managed-bean-jsp-link:1Main.jsf-->
    </managed-bean>
  </adfc-config>
  

  No idea why the button does not work correctly all the time?

  Thanks in advance

  Play well!

  Now, we understand the problem and can help you solve it.

  The problem is that you dropped the home page in the flow of student loan and place you thinking that you must return to the point of departure, the unlimited workflow. Actually, you don't the sheet flow loan student but simply see the homepage as part of the loan flow. The navigation rules remain those defined in the flow of student loan. Now, when you click on a button to jump to the stream of research, the target is undefined zed you simply stay on the same page, the home page.

  To make your work use case, you set a return action in the flow of student loan that return to the caller, the flow of research which, in turn, will return to his name the workflow without terminals that hold the homepage. Remove the homepage of flow of charge to students. The case of navigation allows to navigate between the button and the new return action.

  In the adf of flow research a wild-card rule that accesses the return operation sends the return flow to the home page. You must remove the sailing time pointing to research prices for the return operation because it can use the same rule of navigation of wild-card then. Then, you add a Bach student load flow navigation rule to the scholarship search page. This navigation is used for the return actionto_searchStudents.

  Timo

• Some keys do not work properly on the keyboard, Portege S100

  I have problems with the keyboard on my S100. The s, d, g, j, q, and a few punctuation signs does not at all. I had problems with them before that have set themselves pretty quickly, but now it appears 'permanent '.

  A USB keyboard works very well. I also replaced the keyboard with a brand new and that has not changed the situation at all.

  I do believe that it is a software problem I tried to reinstall the drivers and restore system several times employee.

  Any help to resolve this issue would be appreciated :)

  Dan.

  Hello Dan

  I presume that there is problem with keyboard controller. I recommend you contact the customer Service of your country partner. They can blink and it should work properly again.

• computer does not work properly after the update, because the screen is black.

  Advice please! :-(

  After an update there about 2 months, my computer has never worked properly after that I turned it back. My windows start page is longer there. My screen is black. The words are only in white and fluorescent yellow...

  The only way I can go online to find Norton (is always at the bottom of the black screen) and go to help. I can get a search bar like that. Almost as if this black screen hides everything below.  Computer is 13 months old.

  My internet provider says it isn't them. Gateway said it's not my computer so idk what happened after this update.

  Any advice would be so appreciated.

  Thank you.

  Hi Patty,.

  Welcome to the Microsoft community. I would be grateful if you can answer these questions.

  1. You have installed the latest drivers for Windows 8?
  2. What is the model number for Gateway computer?

  If you get a black screen after upgrade to Windows 8, it might be due to an outdated or incompatible graphics card driver. Update to the latest version of the display driver should fix this.

  Try to remove all external devices connected to the computer and then try to start the computer and check if it works. Follow these methods and check if that helps:

  Method 1: To resolve this problem, update the Gateway website. video card driver

  Step 1: Check out these Microsoft items for additional reference:

  Download and install the drivers

  http://Windows.Microsoft.com/en-in/Windows-8/all-drivers

  Step 2: If you are not able to find drivers for Windows 8 to HP support. Try to install the graphics drivers in compatibility mode and check:

  Download your applications and devices in Windows 8.1

  http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working

  If the problem persists, proceed to the next method.

  Method 2: I suggest to follow the suggestions provided in this Microsoft KB article and check if this can help:

  Windows 8 starts with a blank screen after a standard or hibernation

  http://support.Microsoft.com/kb/2756559/en-us

  See also the suggestion provided by Scott (owner of Forum) from this thread and check if this may help.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/black-screen-when-logging-into-Windows-80-or/93bb4530-C31C-4a2d-91e6-7ec2fc420379

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Mouse on laptop is not working properly since the installation of USB mouse.

  Original title: cusier will not work

  Hello asked a mouse on my labtop the arrow move might turn into that something off arrow moves when the mouse is taken, but not when I unplug the mouse

  Hello

  1. for how long are you facing this problem?

  2. don't you make changes before this problem?

  3. what operating system do you use?

  4. What is the brand and the model number of your laptop?

  Method 01:

  I suggest you check in safe mode.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  I also suggest you to reinstall the drivers for the touchpad from the manufacturer.

• Devices may not work properly after the upgrade

  While trying to update, I received this message:
  "These devices does not work after the upgrade.
  Before the upgrade, we recommend that you update the drivers for those devices.
  Cancel the upgrade, open Control Panel and search for
  "update device drivers", or select the instrument manufacturer
  Web site to search for updated drivers.
   
  Storage controllers: controller IDE ASZE9NGB

  I searched Google, Bing and Microsoft and... nothing. Please help me! Thanks in advance!

  This diagnosis you have done to date?
   
  Did you look in Event Viewer?
   
  Error messages?
   
  Please provide details about your current problem.

  We are better able to help you if you help by providing us with as much information as possible...

  Suggestions for asking for help on a site.

  http://support.Microsoft.com/kb/555375

  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• Keyboard and mouse did not work properly after the service pack 2 update

  key Board runs very slowly and mouse runs through the screen when it is used. Acer Aspire 5050-3371 came with Vista home

  Hello

  Do you use a touchpad or mouse wired / wireless?

  Your laptop is connected with laptop keyboard?

  I suggest you to check if the keyboard and mouse work will find in safe mode. Follow the steps that will help you perform the following checks:

  Method 1

  a. restart the computer.
  b. start typing the F8 key.
  c. you get early boot option window.

  For more information, see: the boot advanced (including safe mode) options

   

  After the entry into SafeMode Log in your user account and check if the keyboard and mouse are working.

  After you perform method 1 Troubleshooting and if you find the keyboard and the mouse does not work correctly then you can perform the following procedure.

  Method 2:

  You can also perform the clean boot and check if you are able to start successfully. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate conflicts of third party software.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7:http://support.microsoft.com/kb/929135.

  Hope the helps of information. Please post back and we do know.

• Click right does not work properly in the Microsoft Sidewinder X 8 mouse

  Original title: microsoft sidewinder x 8

  Hi, I had a sidewinder x 8 micrsoft. I love rly. but since yesterday I have a problem strange rly. If I click on the right button of the mouse the mouse starts clicking on itself. Click, click, click, click. then I click right button again and it stops. It's rly boring. I went on a normal USB mouse and it works if this isn't a problem with win 7.

  yesterday, I've updated like everything.

  NVIDIA, win7, chipset intel, new mouse and keyboard software microsoft, update virusprogram and scan, firewall updated.

  the first update was the new nvidia update. 1 hour later the problem, after that I've updated everything.

  Hi PatriceA,

  Thank you for joining Microsoft Community where you will find all the necessary information on the windows!

  Click right does not work in Microsoft Sidewinder X 8.

  Check the mouse in another computer to make sure that this is the problem with the device.

  If the problem occurs with other computers as well, then I suggest allows you to obtain assistance at the Microsoft site for technical support for hardware problems.

  See the site:

  http://www.Microsoft.com/hardware/en-us/support/troubleshooting

  You can also consult the site:

  http://www.Microsoft.com/hardware/en-us?WT.mc_id=hwvan

  I hope this helps. If the problem persists, let know us and we would be happy to help you.