diallog file template

Hello

I have the names of files in the format: y%m%d%H%M%S.jpg as 121102223344.jpg

I want to write that will allow me to see only files written only this format when I put on the way

I tried this way

but I don't see the results...

Is there a way to do it?

Any suggestions appreciated

I think maybe it's your only because LabVIEW ultimatly relys on the API of the BONE from the file dialog box and that is where the limitation exists. You must add each desired for the separate template file name by ';' to display only those files. I think your solution is elegant. If you want to take a little further, I think you would have to re - create the file in LabVIEW and dialog box depend on the API (but I don't know I would say, elegant).

Tags: NI Software

Similar Questions

New file Template = Busted HTML
Greetings - it has been long since I posted here. I hope someone can help me.

I have not used Dreamweaver in a while, but I'm sure I'm doing everything by-the-book. I also tried Googling for known issues with the templates and PHP code embedded, which is where this problem occurs, but I have yet to find useful resources on the topic. So, let's go.

I have a site defined in DW8. The configuration is PHP/MySQL, editing directly on the test server using a local area network path. The URL of the site is/is/servicemastertransfer /, and the folder the project root is w:\wwwroot\is\servicemastertransfer\. This folder has the following hierarchy:
----------
\
\admin\
\admin\admin.php
\images\
\images\spacer.gif
\review\
\review\review.php
\Templates\
\Templates\Test.dwt.php
index.php
----------

The problem is twofold:

(1.) after I create a new file from template Test.dwt.php and save to the root of the project (as test.php for example), links to the review file and admin are always listed as they are found in the model - i.e. the paths are still compared to the model, not the file. Thus, they appear as href ="... / review/review.php"instead of href = review/review.php".

(2.) there is a block of PHP code that is embedded in the model which seems correct in the original template file, but when the template is applied to a new page it is systematically distorted.

What should be:
----------
< div >
<? PHP if (isset($_SESSION[SESSION_NAME]['user']['user_nt'])) {? >}
"" < a href = "... / logout.php" title = "this will save you out of the system." > logout < /a >
<? PHP} else {? >}
"" < a href = "... / submissions.php" title = "you must be logged in to use this site. Click here to login"> Connect < /a >
<? PHP}? >
< / div >
----------

ends up like this:
----------
< div >
<? PHP if (isset($_SESSION[SESSION_NAME]['user']['user_nt'])) {? >}
"< a href="logout.phpimages/spacer.gif "width ="1"height ="1"border ="0"align ="right"/ >
<? PHP if (!) ARE_WE_LIVE) {? >}
< /a >
<? PHP}? >
----------

I went on the model PHP and HTML several times to validate the correct syntax and cannot find any instances of unbalanced tags or braces. I wonder if DW interprets some of my PHP syntax DWT? Otherwise, I'm helpless as to the cause. I enclose three files: DWT file, the result of the file-> new from template to test before you save it and the new file even after be saved under the root of the project. Note that the unregistered file sometimes relative paths and some cases of type file:/// full paths.

Never mind. I have upgraded to version 8.0.2 and then the basic pattern for the files in the site. Everything works as expected today.

Open to create problems replace with the recording of file templates

Hello, I had a problem with the function open/replace/create. Could you please specify each function, how it works? As you can see in my file, I try to record in the specified path. The values appear in the text file, but when I change some values in the course of data, it replaces the old value, it has been. I want to have all the data in a single file until I close and open another file for the operation.

How can I do?

Thank you

I think that its programming in-> file-> advanced file io

Could not delete the .dwt file 'Templates '.

Hello
I accidentally downloaded a file .dwt as model instead of a .htm and when you try to delete
I get the following error:
In the admin of the site - pages - when you select the model, you get this error subsequently saw the .dwt model (that you can't remove) in the folder:
If you try to delete the file in the admin area - there is no visible model to remove:
Is there a way to get around this?
See you soon
Dave

Ah, I see that you do not use DW to upoad model.

If you use a third party FTP program, you must have EU at the end of your settings of username in your FTP program.

Changes to the template will not refresh dependent files

I check a file template with its dependent files to my server using Dreamweaver FTP. I'm making some changes and save. It is supposed to invite me to update dependent files. But it doesn't work. If any changes are applied to the set of files by using the template. I also tried to update the pages manually by clicking Edit > templates > update of the Pages... But DW is looking in a different way to find models, rather than search in the directory where the server is installed. What is the best way to make this work?

Is your site correctly defined in Site > Manage Sites?

You have the file Template.dwt in a folder models in your local site?

Are you sure this is the right model for this project?

You have all the child pages in your local site folder?

It is important to understand that the models do nothing on the web server. They are the property of DW and only work on files of your local site.

Nancy O.

Automation scripts: missing template.10135.rsp file
Hello, the 10_int_10135_patchset.sh script needs the file template.10135.rsp and this file is missing from the scripts defined.
How can I get it?
Thank you
Hello
the content of the file is lower, we apparently missed to include the latter. We will ensure update together to solve this problem.

Gerhard

RESPONSEFILE_VERSION = 2.2.1.0.0
DECLINE_SECURITY_UPDATES = true
FROM_LOCATION_CD_LABEL =
TOPLEVEL_COMPONENT = {"Oracle.As.J2EE.Patchset", "10.1.3.5.0"}
SHOW_SPLASH_SCREEN = false
SHOW_WELCOME_PAGE = false
SHOW_CUSTOM_TREE_PAGE = false
SHOW_COMPONENT_LOCATIONS_PAGE = false
SHOW_SUMMARY_PAGE = false
SHOW_INSTALL_PROGRESS_PAGE = false
SHOW_REQUIRED_CONFIG_TOOL_PAGE = false
SHOW_CONFIG_TOOL_PAGE = false
SHOW_RELEASE_NOTES = false
SHOW_ROOTSH_CONFIRMATION = false
SHOW_END_SESSION_PAGE = false
SHOW_EXIT_CONFIRMATION = false
NEXT_SESSION = false
NEXT_SESSION_ON_FAIL = false
NEXT_SESSION_RESPONSE =
DEINSTALL_LIST = {"Oracle.As.J2EE.Patchset", "10.1.3.5.0"}
SHOW_DEINSTALL_CONFIRMATION = false
SHOW_DEINSTALL_PROGRESS = false
CLUSTER_NODES = {}
ACCEPT_LICENSE_AGREEMENT = false
Oracle.OWSM.Core:PROD_HOME =
Oracle.TopLink.Developer:PROD_HOME =
Oracle.apache2.Server:PROD_HOME =
Oracle.oc4j_extended:PROD_HOME =
Oracle.apache2.modules:PROD_HOME =
Oracle.ADFP.lib:PROD_HOME =
Oracle.TopLink:PROD_HOME =
Oracle.IDM.RSF:PROD_HOME =
Oracle.As.Portal.welcomepages:PROD_HOME =
Oracle.IAppServer.Security.OSDT:PROD_HOME =
Oracle.IAS.ha.midtier:PROD_HOME =
Oracle.RSF.has_rsf:PROD_HOME =
Oracle.RSF.ops_rsf:PROD_HOME =
Oracle.Apache.oradav:10.1.3.1.0:PROD_HOME =
Oracle.OWSM.Core:szl_OC4JInformation =
Oracle.Tip.ESB.Runtime:szl_OC4JInformation =
Oracle.Tip.pcbpel.Runtime:szl_OC4JInformation =
Oracle.As.J2EE.Top:szl_OC4JInformation =
Oracle.OWSM.Core:bMaskValidationOC4JInfo =
Oracle.Tip.ESB.Runtime:bMaskValidationOC4JInfo = false
Oracle.Tip.pcbpel.Runtime:bMaskValidationOC4JInfo = false
Oracle.Apache.Apache:s_group = 'Oracle'
Oracle.apache2.Server:s_group =
szl_IASAdminPWInformation =
szl_IASAdminInformation =
szl_OWSMInformation =
s_http_host =""
s_asInstanceName = 'IAS - 1.nodeB.mycluster.com.
s_adminName = "oc4jadmin.
OPTIONAL_CONFIG_TOOLS = "{}".
[email protected]

Cannot frind (or change) a template (.dwt file)

Hi guys,.
It's maybe a stupid question, but I did some Googleing and cannot arrive at answers. Here's my problem, I have provided by the site www.AChurchThatServes.com, the estincomplet site, and according to my boss, must be completed before this Saturday. I am not a proffesional web designer, I used to code in HTML hard back in high school and did some DreamWeaver works but not receptive (tons of work in PhotoShop, what its evidence for). If you click on the link to our topic and look at the source code, you will notice this line of code at the top next to the opening HTML tag:
"" <!-InstanceBegin template="/Templates/about_home.dwt" codeOutsideHTMLIsLocked = "false"->""
This model involves the upper frame and some tables, I've done a lot of work and created all the Web pages of the dead links, but now I need to be updated and some links in the model of change... but for the life of me, I can't find the file "/ Templates/about_home.dwt ' I downloaded the entire site from the FTP server , but this issue seems to be non-existent with this file. I cannot change any of the regions in the model and want to change the model to update this large site. Why can I not find this file or folder, I have "show files and folders invisible" works as well. I did a manual search and an automatic search of hard drive, no file... and I can not find it on the server or the other. WTF? Am I missing something obvious here? Please help, thanks!
-Christ_Guard

In the past, this has worked for me.

Open the file in DWCS4

Click Edit > templates > detach the model

This will remove the no disposable model info.

Good luck!

John

How do I find/recover a file deleted from a move/replace when the Recycle Bin is bypassed?

Recently, I made a search for particular file template. The Find dialog box, I selected all files returned by the search and trained in a backup folder. Unfortunately, there were a few files with the same name and I selected by error "Replace" and the particular file I was interested has been moved or deleted. I thought I was doing a copy, but the source files have been deleted. I tried to run several file recovery programs, none of them found the files that have been deleted as a result of this move/replace operation (apparently the Recycle Bin is bypassed for this operation). I know that the directory they are found, but the program is not all the deleted files in these directories. Help!

I recreated this scenario in Windows 7 with the same result. How these files are deleted, and how to find them?

Hi Jimstaff,

Welcome to the Microsoft Answers site!

Try to face a return of the folder that contains the files now and then try to restore to a previous version.

Whenever a system restore point is created for your computer, an older version of each file is created. You can try to right click on this particular and select restore to the previous version. You may get different dates, which you can restore back.

Try this if you have restore points created for folders. If this isn't the case, then there is no way how you can recover these files.

Hope this information is useful.

Amrita M

Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

doesn't have an office template Table mobile poster

Thank you, I met another question.
I create mobile nursery and index.html page already exist.
Right now, I need to modify a page web nursery Tablet and desktop from a mobile phone of nurseryTamplate nursery.
So after changing the table and the model Office nursery page, I want to back up only the files for Tablet and desktop displays.
I go to new Document-> Site-> PlantN site templates-> nurseryTemplate-> create button->
After that go to file-> save-> type-> hint it is index.html for a mobile exist.
Also, copy dependent files dialog box does not appear. Dialog box, Dreamweaver displays "" the file you selected already exists you want to overwrite this file? ' " I click Yes.
However, there is nothing has changed for Tablet and desktop displays.
Please help me how to understand it.

Dreamweaver files automatically registers some DW wants to I think.

Don't blame the software. The first time you save a file, Dreamweaver asks you where to save it and invite you to give your document without title an appropriate name and the extension.

See screenshot below.

Chances are that you have:
- Not been name the files correctly first.
- Or you were replacing existing files with new content.
Afterwards, go to file > New > Site Template > select file Template.dwt in your Site and press the button create. Then save it. Repeat for other pages of the site.

Nancy O.

Could not load the .zip file after changing CSS

We are working on a native android application with DPS.

We would like to use some custom CSS to change the banner at the top of the façade of the library/store. Our developer takes the work .zip file, open, change the CSS, re-archiving it and then back to send it to me. When I try to create the application by using the new .zip file, the app crashes.

We went through a series of changes CSS, thinking it was the CSS that was the problem before to sit and try a different set of tests.

The first thing we tried was taking labour zip file, unzip, without making any changes, and then re - zipping it and make the app again. It breaks the app.

Leave us this kind of tests and tried a more.

Two files were created; We have the file structure:

Zip archive
-Default_android_library
-folder fonts
-images folder
-index.html
file - js
-libs folder
-main.js
-style.css
-file templates

And the other is just:

Zip archive
-folder fonts
-images folder
-index.html
file - js
-libs folder
-main.js
-style.css
-file templates

None of these worked, either.

Everyone knows that kind of problem before with the edit and re - compress them for android?

Thank you.

Neil,

I think that we thought about it, we add an extra layer to the file structure in zip archive.

Thank you

Christopher Huber

ODI - reverse the data of the file store?
Hi gurus,

I'll put up the ODI for plainning application

I have installation topology and have creatred models.

Our requirement is to load the Member of Dimension Plannig of flat files.

So I have to the templates in the designer of... One for the flat file... one for planning.

I did the opposite of the planing model succesfull, and she filled with all dimensions.

Now, I want to do the opposite for the file also.

But when I'm walking back on the model of file it says... cannot reverse the file template, go to the columns in the data source tab and then do the opposite.

I created a server manulayy Say for accounts Dimension data, went on the colum tab, then did the revere, he succeeded.

But the problem is that the columns are like c1, c2, c3... so on.

They do not have to come from the way the data store was filled when I reverence for data store planning.

If anyone can suggest me a good way to make this event for that datasource is properly filled with the correcct names,

Also is there a way to fill (reverse) model of file data source... for all files (say 15) and not individulally one by one.

Suggestions would be much appreciated

Thanks in advance
If your file as header records make it sure in the files tab set heading 1 then when you reverse the columns that it must pick up the column headings

Reversal of several files you can watch http://odiexperts.com/rkm-file-jython/

See you soon

John
http://John-Goodwin.blogspot.com/

How to create a library of shades from several png files?

Illustrator CC
I'm having a hard time trying to create a new shade of several png files template library. The way I do it is very slow and repetitive and seems ridiculous for a tool that is as advanced as the last consequence CC including illustrator.
It seems that I have to do is open all png files in Illustrator, create multiple workspaces, drag a png file in the swatch window, and then save this window as a library, close the existing window to reveal the next png file, open the user's library, I just created, drag the following image in the currently active window swatch and then drag the previous swatch/s of the library of the user in the active window current swatch, re-record and replace the shades defined the user library (now with two images in it) in the update of current active swatch Panel / window, close the existing workspace to display the next file image and then repeat the process again slowly accumulate shades defined the user library by adding an image at the same time then in the Swatch Panel library previously accumulated shades again one in time. (you can select all from the library defined by the existing user and drag it above in swatch window, but this creates at least a copy at each cycle for as soon as you click on the first sample in the library, he adds ITTO the current swatch group and then when you select the nuances of slip through it includes the first shade and still once copy)
It is a very slow process to put in place a swatch library. For some reason you can't drag samples directly into the user defined library you created, only in the window active swatch for each workspace. I searched the web and the forums for answers, but could find none. There must be an easier way, just can't find it.
Ideally, the best option would be a swatch window option that allows importing directly in a list of files selected in the finder.
Any ideas out there?

Thank you

I can see how to work with it.

I opens the library file, drag other png files open on the sheet of library file, and then drag the images into the swatch window.

Not exactly intuitive at first, especially the files are hidden, but it works.

Thanks again

Problem with rename template page, CS5

A few years ago I created my site using WYSIWYG Web builder 5.5 and now I get my hands on Dreamweaver CS5 and I'm trying to learn it. I find some tutorials on the internet with lots of useful information. Because I used very simple WYSIWYG Web builder 5.5, I'm not so good with HTML and CSS. But I'm learning.
I have a problem and I can not find solution for it.
I want to use the templates because they are the simplest tings. I have about 190 pages on my site (http://f1-dictionary.110mb.com) and models will help a lot.
I created a page and I call it (title) "Home" and I save it as a template as "index.dwt". I created editable regions (content) and blocked domains ("header" 'sidebar1″' I 'sidebar2'). According to all the tutorials, I find, < title > < / title > part is editable, and you are free to change the title of the page. But not in my case. By Christopher Heng, thesitewizard.com CS5 tutorial:
4. change the field title in the window of Dreamweaver for "Example of Co" (where "Example Co" is the name of your site). For those who have forgotten what the field title, please refer to the picture below, taken from Chapter 1. You will need to remember to change this title field whenever you create a new page for your model, or all of your web pages will have the same title. Don't worry that you did not mark this title as editable field in your model. The title field is still considered to be an editable field by Dreamweaver.
In my case, all the pages created from index.dwt template have the same title (home) and I can't change it. For my home page created from this template it of OK, but the front page of the site, I want to give the title 'Sitemap' but I can't. It is automatically replaced by back home. And this isn't what I want.
In my case only 'Doctype' is free for editing and everything after that code window is grey, < title > home < /title > included:
<! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
" < html xmlns =" http://www.w3.org/1999/xhtml ">
Beginning of my model looks like this:
<! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
" < html xmlns =" http://www.w3.org/1999/xhtml ">
< head >
< meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
Home < title > < /title >
"" < link href = "... / thrColFixHdr.css" rel = "stylesheet" type = "text/css" / >
< style type = "text/css" >
a: link {}
color: #009;
text-decoration: underline;
}
a: visited {}
text-decoration: underline;
color: #F00;
etc, etc, etc,...
And the beginning of my Sitemap page created from this template looks like this:
< ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
" < html xmlns =" http://www.w3.org/1999/xhtml "> <!-InstanceBegin template="/Templates/index.dwt ' codeOutsideHTMLIsLocked = 'false'->
< head >
< meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
Home < title > < /title >
< link href = "thrColFixHdr.css" rel = "stylesheet" type = "text/css" / > "
< style type = "text/css" >
a: link {}
color: #009;
text-decoration: underline;
}
a: visited {}
text-decoration: underline;
color: #F00;
etc, etc, etc,...
All inclusive and after "> <!-InstanceBegin template="/Templates/index.dwt "codeOutsideHTMLIsLocked ="false"-> is grayed out and unavailable for editing. And I can't change title 'Home' to the 'Sitemap '.
Please help me! Or I'm doing something wrong, or... I do not know!
Thank you in advance!
SEAS1

What you need to do is to open the file, index.dwt, switch to view code and joined yourHometag of polarity

code to create an editable, as illustrated below:
```
Home
```
As a side note, you need to save the as model .dwt file: Save as > model.

This creates a "Templates" folder in your site folder and a file named "template.dwt".

Once this has been done you then create other pages of the file "template.dwt".

page 190, I would seriously consider SSI (Server Side Includes) as a method of updating the pages.

Using this method you just update one or two files based on the editable sections how you

on your page/s. Then, you only need to download these handful of files that have changed on the server instead
all 190 pages every time you make a change or change.

Flash no longer works when refreshing a page template

Recently moved from GoLive to DW CS3. I bought Total Training for DW CS3 to help the transition.

I am wanting to create a page template to use for the entire site, so if I need to make a change to the model, it updates my entire Web site. When I download the page, the flash image load very well. The problem I have is if I reopen the page template.dwt and make a change, when DW updates the pages that are related to the model, the flash of images in the pages no longer work.

Here are my steps that I took:

1 create a page named index.html

2. an editable region called "main content" insert > template objects > editable region

3. has created a folder named templates in the root directory

4. file > save as template and called home.html (for testing so not joking my work index.html page)

5. file > new > Page model and chose my file template.dwt

6. adding content to the page.

7. file > save as a society - hist.html

8 download index.html and home.html company - info.html on the server.

Everything works as it is supposed to.

9. open template.dwt and make a change.

10. save the page and DW updates pages home.html and company - info.html

11 download to the server

12 flash image on these two pages stop working

Here are links to my pages

Index - works

Home - (from template) Flash does not

Company Info - Flash works (didn't model) Flash does not

Any ideas where I'm wrong?

Oh, I see that you did. So in the template file, make it.

AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','width','900','height','256','title','Main Flash Slideshow','src','../images/Main-Flash-Slideshow','quality','high','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','../images/Main-Flash-Slideshow' ); //end AC code