Dialog box: problem with an application mstoolbar wlextension.dll

Similar Questions

• whenever I start my windows, the dialog box appears with the words "persistence module a work stoppage" how to fix this problem?

  whenever I start my windows, the dialog box appears with the words "persistence module a work stoppage" how to fix this problem? someone help me please tell how to fix

  Hello

  1. have there been recent changes to the computer before the show?

  I suggest you to try the steps below and check if it helps.

  Method 1: Start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Problem with an application of text analysis

  Hello

  I am a beginner in labview and I have some problems with my application.

  I have the front of my VI, an area of input text and two arrays of strings: one that contains a few words I have to say if they can be found in the text.

  And the other table contains the results of research: found or not found

  I did my version of the block diagram (I have attached to it), but I noticed that it only works only the first time I run the VI, subsequently, it displays the same results despite the entry of text or words. I find the my table has continued to add new entries every time that my for loop runs so I try to reset the table with constant strings at the beginning, but I guess that I did not it properly because I have the same problem.

  And I also have another problem: my array of words has its size = 7 and if I fill it with fewer words it's size, empty boxes in the results table appear as noted.

  Can anyone gve me a suggestion?

  The first attached VI is my original request where I found the problems described and the second contains what I have tried to correct

  Autoindexing if your friend here (and MUCH simpler because of things).

  Also know that "offset after match" will be-1 if the word was not found.  So you can just do a simple check for the number being greater than or equal to 0 see if it has been found.

  

• How to fix dialog box opens with Adobe first Elements.exe - no disk

  I bought Adobe Photoshop and first elements 13 and s/n.

  I have a desktop running Windows 7.

  I installed Photoshop and Premiere Elements as a trial and entered s / n as required.

  I can open Photoshop without problem.
  

  Whenever I try to open the first items, a dialog box opens with this info.
  

  
  

  Adobe first elements.exe - no disk

  
  There is no disk in the drive. Please insert a disc into the drive\device\harddisk1\dr1.
  Buttons-cancel, try again or continue

  
  

  I want to solve this problem.
  

  Any help is appreciated,

  William

  
  

  William

  What you describe is a known problem with the elements first 13/13.1.

  Adobe gave us the solution that seems to be deleting the OldFilm.AEX file.

  Windows 7, 8 or 8.1 64-bit

  Local disk C

  Program Files

  Adobe

  Adobe Premiere Elements 13

  Plug-ins

  Commune

  NewBlue

  and in NewBlue folder is the file OldFilm.AEX that you remove or disable by renaming the file OldFilm.AEX in OldFilm.AEXOLD.

  Please let us know if it works for you, because it has for others.

  Thank you.

  RTA

• Since the recent upgrade, I don't see any of my projects in Shutterfly. Their customer support says that it may be the problem with the application Java and Adobe Flash Player

  See above - there known problems with these applications?

  Your player (if any) Java is not indicated clearly in your list of plugins, and your FlashDrive is several versions behind. If Apple has a site update, you can check that first. Mozilla site is here: http://www.mozilla.org/plugincheck/

• 7 error "Paris 7.2.241.1enRegInstaller.exe of work and has been closed." A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  Original title - 7.2.241.1enRegInstaller.exe

  Hello.

  Today, JUST after I "Set Windows to update," twice, I got the disconcerting message:

  "Paris 7.2.241.1enRegInstaller.exe of working and was closed".

  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. »

  Any wisdom or experience with this?  I'm on a 64-bit HP Pavilion older (dv7-1245dx) with this OS JUST-update Windows (Vista Home Premium).

  Thank you.

  GIES W

  The solution has been found just uninstall bing bar, restart the computer, and if you want just bing toolbar to reinstall. This easy solution my system fixed.  Bing has again reminded all my points that I have amassed

• I have problems with my application of the java language.

  I have problems with my application of the java language. It will be open only for about one second, and it won't let me write all programs, it looks like the command prompt when opening. what the * is underway and what can I do to solve this problem.

  Hey Kevin,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it.

  I would really appreciate if you could answer the following questions:

  1. is the specific question of the application of the Java language?

  2. did you of recent changes made to your computer before the show?

  3. you receive an error code or message?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  If the problem is specific to the Java application, then I suggest you to contact Java support from the links below:

  http://www.Java.com/en/download/support.jsp

  Java Help Center:

  http://www.Java.com/en/download/help/

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• I have problems with JavaFX applications run on raspberry pi!

  I have problems with JavaFX applications run on raspberry pi. I did all the steps of the course videos: overclocking, without comment that I had to uncomment on the framebuffer, but Exceptions are always produce. Demonstration of fireworks as an example does not work. Someone went through this problem? Java applications are ok. Like the versions of java in netbeans project and also on 'Properties' and they are all JDK 8. So if anyone can give a clue, I am very grateful!

  Can you provide the exceptions that you got so I can help you better?

  You want to make a coaching for this session?

  Vinicius-

• I had problems with the application Manager Update, then I was instructed to re - install the product now I can not install I get the error

  Cs6 bought for more than a year, and recently had problems with the application manager, then I was instructed to re - install the product now I get errors after downloading to install it, so now I don't have cs6 on my computer, I can't go to adobe as I keep getting palmed to do that and the next thing , why can't I talk to someone why my program is not installed.

  It's ok now, I used the creative cloud cleanser and then tried to install again and bingo! everything fine now, thanks anyway

• Problem with an application running Adobe Flex. Tech say that they cannot monitor, track or detect the problem.

  Problem with an application running Adobe Flex. Tech say that they cannot monitor, track or detect the problem. Application will stop and give wanders it depending on:

  Failure of server APACHE Bridge:

  ---

  Not available for a connection of back-end server: expired after 10 seconds or idempotent OFF or not idempotent method.
  

  Download, installation, implementation of Flex>

• Dialog boxes personalized with GREAT text.

  LabVIEW 2010

  Since the regular dialogue vi use standard text and I need big txt I have generated my own. Can I combine strings of errors so that I can work around the error dialog boxes (sort of). However since they are called, but not run they flash briefly on the screen. To resolve this problem, I used screws wrapper for each dialog box that make handeling error unitialized shift registers equipped with remember the last item entered.

  Requirements.

  1 ask the user to information in large text.

  2. variable prompting text.

  3. don't forget previous entry (by instance)

  4 handle the error to work around the dialogue with error in.

  5. selection of "cancle" trap error

  6 focus on control of the key entry

  7. multiple instances so that when I ask the serial number, it doesn't remember the part number that I invited just to.

  This last part is the trickiest part. Where to put the re-entrant execution. Can I put it to the packaging or the dialog box? Maybe there's another that I'm missing that makes easier.

  Norm

  HI Viper,

  Yes it is.  It is advisable to establish a dialogue before be displayed.  To do this, uncheck 'show façade when it is called' in the properties of the VI so the dialog does not appear initially.  Then use the FP property node. Open your VI dialogue after you look for errors.  It would be also good to populate the old data before the display of the VI.  I use this technique for re draw dialogues before being posted (show/hide controls etc.)

  Michael.

• Add Server 2012 R2 Server Manager servers dialog box problem

  I have a problem in 2012 R2 Server when you add a remote server to all server management interface.   Using the dialog box add servers to add a workgroup server (no configured DNS server), I added the problem of server using the IP address.  A dialog box appears that says "can't resolve host would you like to add it anyway?  For awhile do this, I clicked 'No', but finally clicked on Yes and the server by its server name has been added.

  However, I can not access this server remotely, make sure that it is in the list of approved first hosts.  I have the correct IP addresses and have firewall advances for troubleshooting I can connect on the server locally with an administrator account.

  Removing the server from the remote management console, and then add that it does not solve the problem as server name solves always in the dialog add a server with the credentials apparently wrong.  It is the only server of four that I made this mistake, the other three work great after choosing 'Yes' to add the server non - solve anyway.

  My question is, how do I clear the credentials of server 'broken' out of the 'Add Server' dialog box to the server properly.  The added server is another Server R2 2012.  I changed server names and addresses IP, but the dialog box always detects the server with the new information and still not will not properly add it to Manager remotely.

  And the idea of how to do to erase the old credentials?

  Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Alert dialog box that prevented an application

  Hello

  I have a problem: I need to add a "ask dialog" to my request:

  Dialog.ask (Dialog.D_YES_NO, "Do You want to trust administrator?");

  but I can use it in the constructor. When I try to put the dialog box asking you in other parts of the program (I need to have one in the run() method in the other thread) - it blocks! and an alert shows nor the application runs...

  do you know if there are alerts of dialogue that do not block the program?

  concerning

  Use EventLock or UiApplication.getUiApplication .invokeLater)

• Prevent the dialog box fill with scripts

  Hello.

  I have an automation script that fills some pixels on a layer. Everything works, but sometimes it displays the dialog box to fill for the parameters with some png files (not all). I need to get rid of the dialog box. Is it possible to do this with the script? for example a default option?

  

  Thank you!

  Photoshop 2015.5 CC

  Windows 8.1

  Well, look's like I solved it the problem.

  The dialog box showed on the png files, Image-> Mode-> indexed color.

  So I added prior to filling, the following script, which will ensure the RGB Image Mode:

  var idCnvM = charIDToTypeID( "CnvM" );
var desc36 = new ActionDescriptor();
var idT = charIDToTypeID( "T  " );
var idRGBM = charIDToTypeID( "RGBM" );
desc36.putClass( idT, idRGBM );
executeAction( idCnvM, desc36, DialogModes.NO );


• When I try to download Illustrator, I get a dialog box asking me which application to use to open the link.  I thought a download of software was just a .exe file - I have no idea how to proceed.

  I was hoping to use Illustrator today, so I bought it.  But I'm stuck at the stage of download with a dialog box saying that I have to choose an application to open this type of link (it mentions .aam)

  Sewn,

  If you use creative cloud, first install the Adobe Creative Cloud Desktop application:

  Download Adobe Creative apps for the Cloud

  and then use the Adobe Creative Cloud Desktop application to install applications:

  Using creative cloud | Download, install, update or uninstall applications

  If you purchased creative suite software, check out these links:

  Suites and programs CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 , CS4 Web Standard | CS3

  Each page contains a link like this to help with the instructions:

  "After you download the installation files, instructions to extract the files and install your product."

  If this method doesn't work well for you, you can download directly from this site:

  CS 3, 4, 5, 6:

  http://prodesigntools.com/Adobe-CS6-direct-download-links.html

  http://prodesigntools.com/Adobe-CS5-5-direct-download-links.html

  http://prodesigntools.com/all-Adobe-CS5-direct-download-links.html

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

  Guinot