Dialup modem connection speed?

Similar Questions

• Vs direct wireless connection speed.

  I have been using a WRT610N router for several years.  A couple of weeks, I bought an iPad 2.  I don't know if this is a limitaion to the iPad 2 or a problem of connection speed wireless, but when you watch the video You Tube music videos often stops and I have to press the play button to resume.  This happens more often if I use a headset Blue Tooth connected connected headphones direct, leading me to the initial conclusion that I see the limits of the processor in the iPad 2.  However, I recently downloaded the application of www.speedtest.net speed Test and found that the wireless download speed varies from topic 11-15Mbps, depending on (normal vs. next to the router).  If I go on this web site and run the speed test of my PC connected directly (connected to 1 Gbps), I tend to 36 Mbps download speed (swollen I know because Comcast so-called speed is limited to 25 Mbps).

  Opinions?

  Let me clarify my speed with Comcast.  I currently have "Blast".  "Blast" currently has a limitation of maximum download speed 25 Mbit/s, excluding the "Power boost".  The limit is imposed by the startup file that has been uploaded to the D3 modem provided by Comcast.  I expect the download speed connected direct to be connected wireless speed, not just much lower.

  I think that the download speed is not the problem.  I have convinced myself now that the real problem is the limits of treatment of the iPad 2. This is based on the fact that when I came to you Tube this AM of the Wi - Fi in a local mall today, the download speed is only about 1 Mbps, but I saw no significant difference in the performance of video playback on my connection from 11 to 15 Mbps at home.

• He is an icon in the upper right corner on your internet connection speed test. is this malware

  He is an icon in the upper right corner on your internet connection speed test. is this malware

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Questions about Wi - Fi connection speeds

  I want to my wi - fi connection speed for my wireless devices. I use an Airport Extreme 4th gen, with an Apple Express 2nd generation. All devices are 802.11n, but iPhones have ac 802.11. I have an Apple TV and a Yamaha AV receiver as well using a Wi - fi connection and doing very well. My Internet speed to my iMac (cable) is constantly 88 MB/s. But two rooms, the living room, my devices see speeds Internet 12-15 Mbps. Two walls and 25 feet between the two.

  A new 6th gen AE would give me better speeds of Wi - fi? Alternatively, would be faster Internet? I pay for 75 Mbps. I realize to reposition my router AE could help, especially to move it to another room, but I like the speed of a wired connection to my iMac, which I use for work. If I got a new AE, I would probably opt for a time Capsure, but I think I read somewhere that he does not like working on 802.11n. My wife has a MacBook Air using the Apple Express... and she obviously would like to back up on a TC instead of his external hard drive attached to the MB.

  A new 6th gen AE would give me better speeds of Wi - fi?

  Yes and no.

  Yes, if you ask on the speed of connection Wi - Fi between devices on your ' LAN '. Given that iPhones are capable of 802.11ac, they would connect to faster speeds if they are in close proximity to the extreme AriPort.  Other 802.11n devices will connect to the same speed as they do now.

  No, if you ask if your connection Internet Wi - Fi speed will improve, since the speed of your Internet connection is controlled by your provider of Internet Service (ISP).  If you want faster Internet connection speeds, you need to talk to your ISP a faster Internet connection package.

  The trick to good Wi - Fi connection speeds in your network is to have Wi - Fi devices in the same room, or line-of-sight with the wireless router. On average, even a normal wall in a House will slow down the speed of 20 to 25%, so if the signal must pass through several obstacles, the speed of the signal drops dramatically.

  Sometimes, the only way to maintain good speeds is to add another AirPort router in another area where you need faster speeds and connect airports together using a wired Ethernet connection.  In the largest House, it is not uncommon to see four or five airports used to get good coverage throughout the House.

  My House is not big, about 2200 square feet, and it takes three airports to cover the good, fast throughout the House.

  I would probably opt for a time Capsure, but I think I read somewhere that he does not like working on 802.11n.

  As you know, a Capsule is an AirPort Extreme with a built-in hard drive. Otherwise, there is no difference between a Time Capsule 802.11ac and an AirPort Extreme 802.11 ac.

  I'm not aware of any report or other documentation that would indicate that the products do not like working on 802.11n. I have an AirPort Extreme and Time Capsule, and both do just fine with "ac" and "n" devices.

• Tecra S1: Duplicator USB adsl modem connection port

  Why usb adsl modem connected to the Port Replicator III works only for power and not for the link

  Hello

  What type of adsl do you use and what country you're from!

  What laptop do you have! What kind of operating system is installed? (Recovery or clean installation of MS)

  The USB port works if you do not have port replicator usw?
  What other computers, do they work well with other computers?

  To bye chris

• JWNR2010v5 (N300 wireless router) will support 100 Mbps connection speed internet in LAN?

  I intend to upgrate my internet connection speed of 60Mbps to 100 Mbps, but my provider says JWNR2010v5 (N300 wireless router) will not support 100 Mbps internet connection speed in LAN. Is this true? that which is the maximum speed of JWNR2010v5 for the LAN support. I don't mind the wireless speed, I use the maximum LAN. Thank you in advance.

  Your provider is correct. Either move your router to a router which supports! 000Mbps (MGI) LAN and WAN ports or stay at your current speed Interent.

  http://www.downloads.NETGEAR.com/files/GDC/datasheet/en/JWNR2010v5.PDF

• Remove my modem connection?

  I have a few computers on a small network ethernet, via a residential gateway (i.e., router), which allow computers to share files and printers, and share an Internet connection cable. Most of the computers on my network is not yet have PSTN modems and (fortunately), I had the need to use remote access services in more than six years. However, in my IE Options CONNECTION tab it says that MSN remote connection has been implemented.

  Sometimes, I received a box of popup with some sort of message about the remote connection and work offline. Of course, I'm not looking for a modem connection. I have changed since my connections to NEVER A CONNECTION settings, but I really want to just remove the connection distance for not having any conflicts in my system or Internet access in the future.

  My question: would I be causing no problem for me on the road if I just remove this connection remotely, and if deleting it would not be a problem, so I have correctly and safely how so? Thanks in advance for your help.

  I don't think that delete a unused dial-up connection can cause problems.  To be completely safe:

  1. make a system restore point.
  2. open the network connections, right click on the connection file and delete it.
  3. in case of problems, restore the system to the way it was before deletion.

  
  Another response of the community of Windows XP newsgroups

• BEFSR41 and reduced connection speed

  I got cable high speed last week, and with it connected directly to my PC, I got amazing 28-33 Mbps connection speeds.

  So I plugged the router today to coonect mine and my wife (via Cat5) PC to cable and now I get only about 5 Mbit/s.

  The router choking off the coast of flow? Do I need a different model that can handle the speed?

  What the BEFSR41 version do you have?

  This problem of slowness "WAN to LAN speed" has been reported with version 1 and version 2.  Version 2 seems to be limited to about 7 Mbps.   Version 1 is slower.

• E2000 low connection speeds

  I recently "upgraded" my router from a WRT54G for the E2000 and changed my computers wireless to USB - N adapters. At first, they were only 54 Mbps but found that I had to use WPA2 (I was in WPA) and after the change is made, I got from around 107Mbps to 130Mbps connections. (Even if these are dual band adapters, I can't enjoy 300Mbps because I left the Router 2.4 Ghz only because I have some only portable wireless-G and I understand that you can not on 5 GHz router because they do not connect.)  In any case, a few days later, when I checked these computers wireless n connection speed, one was at 5 Mbps, another 20 - something.  The signal strength is good at computers, as it has always been.  This router "modifies" speeds "as needed" or something?  Any help is greatly appreciated!

  I think 2.4 GHz is faster than the 5 GHz Wireless band.

  You can connect the router WRT54G of E2000 router to create a new 2.4 Ghz wireless network and allows you to broadcast the signal 5 GHz E2000 wireless router.

  Follow this link to cascading Linksys router to another router.

• Connection speed 2.4 Ghz E3000 and USB HDD

  I use WRT160N for my internet and wifi at home. For the storage of the laptop, I use Seagete Free Agent 2 TB USB 3.0, which is nice by car.

  So I desided to buy E3000 and use as storage server, router, internet and wifi.

  I install everything, he went peaty smoot.

  During installation, I noticed that 2.4 GHz wifi shows only max 150 Mbps, but 5 GHz 300 Mbps connection speed (I use wifi mini card dell 1510 on my Dell laption, supports the 2.4 and 5 GHz).

  I tried different things to the 2.4 GHz to display connection 300Mbps speed (disable 5 GHz option, set the mode to "N" only, always use WPA2, etc.), but without success. When I connect to the old WRT160N, I can see 300Mbps speed of connection.

  Can you advice what settings should I set up, so that I can use connection to the E3000 300Mbps?

  The second bit I want to share and comment on is the access speed to the reader of the UBS.

  When I connect to the reader directly on my laptop, I am limited to 32 MB/s (256Mbps) read/write speed (the laptop is USB2.0, so it seems normal).

  Now, when I write of the E3000 max speed wifi I do is about 3 to 3.5 MB/s (24-28Mbps) and when it is connected to the local network (100 Mbps) speed is about 4 - 4. 5 MB/s (32-36 Mbps).

  It seems slow, peaty compared to the speed of the USB. 5 GHz wifi rate shows 300Mbps connection 144Mbps speed/2.4 Ghz (which is 18 MB/s), so that the router should be able to keep read/write rate highter.

  Is this a problem E3000 or this is the max I can get material in there?

  1. it's a router not a storage attached to the network power house. If you want a NAS with high performance get a NAS. The USB HDD is more for practical reasons, then for high performance. Drive speeds you see through the router are good enough for a device like this. Check what CPU you have in your E3000 and which processors they use in NAS devices that are able to provide data of 250 Mbit/s from a connected USB device and you will see that it is a completely different League...

  2. the 150 Mbps is a rate of 20 MHz. The connection uses only a band of 20 MHz and not a 40 Mhz. This is usually due to one of these two reasons:

  a. many pilots (for example Intel Centrinos) wireless equipped with 20 MHz preconfigured on the band 2.4 GHz. It will link ever more quick then 150 Mbps, unless you change the configuration of the driver.

  b. most / all new routers observe interference of signal on the tapes and automatically returns to 20 MHz mode, if they find too much interference. If you have many other access points in your proximity 40 MHz would mean more than twice the interference on the connection. Any other communication on stuck on 40 MHz channels would interfere with your communication. With a lot of traffic interfering on the range 2.4 GHz, you would see very low real rates if you forced 40 MHz in this case.

  And your neighbors using 802.11 g wouldn't really appreciate your bandwidth hogging. Because of the limited number of channels without overlapping on the 2.4 GHz band a router running on 40 MHz basically use 2/3 of the total available on the entire 2.4 GHz band available bandwidth. The execution of 40 MHz in a neighborhood with many other access points is all just a terrible idea...

• Connection speed problems - black WUSB54GC usb adapter

  Hello everyone,

  This is my first post here!

  I googled nothing helped, and so I thought I would record with the Linksys forum and see if maybe I can solve this problem that others may have as well.

  I recently installed black WUSB54GC usb wireless adapter on my desktop PC, windows XP (now updated with service packs, etc.)

  The adapter receives the complete signal (very good - excellent, 54 Mbps), but it seems that my download speeds are capped with this adapter. Web pages same way load more slowly. I can place the macbook from my girlfriend directly next to my office, connected to exactly the same wireless network, and its download speed, browser speed and speed test results are always twice as me (any site speed test I use or what file I download).

  When I do a speed test, almost seems as if the speedometer needles few want to continue, but they just 'bounce', as they are hitting some kind of ceiling.

  When downloading files, the macbook on average 500 to 800 Kbps, while the adapter WUSB54GC hangs out at approximately 90 kbps.

  I have read in this forum and have adjusted my router Linksys WRT54G wireless suggested as follows:

  -Set the channel 11-2 wireless, 462 GHz

  -Change the interval of tag to 75

  -Change the Fragmentation threshold to 2304

  -Change the RTS threshold to 2304

  In addition, my connection speed is even slower, regardless if I have the settings TCP/IP (under the Wi - Fi connection properties) set manual (static ip) or automatically.

  Any help would be greatly appreciated, as I would like to be able to get this thing working properly, knowing that my router is pumping a lot more than this adapter is letting me use.

  Thank you!

  Well, I think I solved the problem.

  Seems that in some ports USB on my motherboard (Asus P5B) do not allow to run at full speed wireless USB adapter. I had used in the rear ports on my computer... but the passage for the first ports (that came with the case - Thermaltake Armor) seems to have solved the problem. However, as I believe that all of the USB ports I have is strange Hi-speed USB 2.0 and strange that those outside that came with the case and will connect to the pins on the motherboard works better than those actually built. Huh.

  Wouldn't be something to do with the drivers for the WUSB54GC, or is this a problem with USB port drivers?

  In any case, I'm sorry if this sounds like a useless thread now, but maybe this someone solve other problems too.

  See you soon!

• Power setting change the connection speed

  I don't know if anyone else has noticed this, but when I change my setting of symmetric power high performance on my laptop and when I start a stack and not connected to the adapter, I noticed a connection speed much more to my wireless router when I connect to the desktop computer. I'm curious because sometimes it wouldn't connect and join the star thingy and I have to reconnect but when I go to the balance or start on battery, the connection speed is almost instantaneous. I tried to uninstall my wireless driver and let the computer to reinstall the driver itself and it fixed a bit, I could connect automatically, more fast, but still not as fast as the balanced mode. Someone please tell me what to do because the problem is back.

  Hello Charles,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Have you made any changes to your computer hardware or software?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Refer to this article:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions provided in this Microsoft support article and check.
  Reference:
  Why is my Internet connection so slow?
  http://Windows.Microsoft.com/en-us/Windows/why-Internet-connection-slow#why-Internet-connection-slow=Windows-7

  Important notes:
  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• HP notebook g72-227wm wifi pc very slow connection speed

  1, 67 - 3.67mbps I get 11 Mbps on all other devices I've tried everything I could find on google help not tech savy tried to run malwarebytes antivirus update combofix ect all drivers don't know what to do and would need someone to answer as I was a child of 10 years or I'll never be able to fix me.

  Hi JoshMayqa,

  A number of factors can affect the Internet connection speed. For more information, see

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-in/Windows7/why-is-my-Internet-connection-so-slow

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  If issue persists I suggest you contact the Internet service provider for assistance on this issue.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Connection speed slow on one node to a node RAC 2 put in place

  Hi all

  Having a little trouble with one of the nodes in a node 2 CARS set up
  We have sent traffic directly to the node in question (using a service that runs only on node 1)

  Forced connection to this node (sqlplus) since an application server remote takes 3 times as long does if we force fitting to the second node RAC.

  If I try to connect locally - connection speed is instantaneous-

  There is NO problem with the server performance

  There is NO problem with the perfromance instance / database - it is only noticed when the initial connection

  I've been in the network of the node and can see nothing wrong - so I was wondering if there was anything you guys might have experienced while the connection time is slow for a single node only (949 ms - compared to 247 ms on node 2)

  If anyone out there is interested or falls on this issue

  The problem has proved to be the mount point options MP Linux Volumes

  I had configured them as part of best practices for RAC / NetApp / Direct NFS - hjowever I also got the binaries for both nodes in order to have greater availability.

  Thereffore I would have had the Mount for NŒUD UNIQUE options.

  The change was to

  -stop the instance

  -unmoiunt binary files

  -change the following on fstab

            NFS rw, bg, hard, nointr, rsize is 32768, wsize = 32768, tcp, to = 3, timeo = 600, actimeo = 0 0 0

  TO

            NFS rw, bg, hard, rsize = 32768, wsize = 32768, to = 3, nointr, timeo is 600, tcp

  -start the instance and repeat on node 2

• Minimum connection speed & a few other Questions.

  Living in rural Vermont that's worrisome, is there a minimum connection speed for CC versions?

  If there is no internet access during the days of 23-33 but go back to the day 35 what happens?

  Check-in is possible the day 21 instead?

  Finally, I saw mention CS7 CS8. Is it in the planning phase? If the CC versions are simply a conveince for those who want this service and regular updates are forthcoming, I would be much happier.

  Thank you!

  Hello

  There is no minimum do not connect speed requirement for the composition of the creative cloud or using products CC.

  The two things that you would need an Internet connection are-

  1. the products of creative cloud you want to use to download & install

  2. licenses & activating products by signing with your ID Member CC

  # 1, adobe has implemented many improvements to be able to resume downloads of products CC post a network outage or failure.

  # 2, a minimum Internet bandwidth is required

  So as long as your connection allows you to accomplish the above, you're all good.

  > If there is no internet access during the days of 23-33 but go back to the day 35 what happens? Check-in is possible the day 21 instead?

  If your subscription of the CC is active, you will be able to resume work on the software after reaching 'Try Again' in the prompt 'Renew your membership' that you see in the software on the 35th day. We are working on some improvements allowing flexibility compared to subscription monthly check-ins.

  > Finally, I saw mention CS7 CS8. Is it in the planning phase? If the CC versions are simply a conveince for those who want this service and regular updates are forthcoming, I would be much happier.

  Please see the letter of the Cloud creative team for more information - http://www.adobe.com/cc/letter.html

  Thank you

  CharAt()