did a clean install of windows 7/64 bit pro on dell xps 8300 and error no driver for sm bus controller / / help

Similar Questions

• I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

  About to panic. Could use some real help on this and not only refers to

  http://support.Microsoft.com/kb/836941

  The computer is a Dell Optiplex GX280

  What I installed is the chipset & drivers for the controller of the motherboard & ethernet.

  Internet works fine on the device, I am writing to you from him.

  Also, tried installing IE8 on one computer and run windows update, same error.

  I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

  About to panic. Could use some real help on this and not only refers to
  http://support.Microsoft.com/kb/836941

  The computer is a Dell Optiplex GX280

  What I installed is the chipset & drivers for the controller of the motherboard & ethernet.
  Internet works fine on the device, I am writing to you from him.

  Also, tried installing IE8 on one computer and run windows update, same error.

  Relax and breathe.

  FIRST: Uninstall IE8 and IE7 if they are installed.  Back to all the way back to IE6.  You want other patches before you get those.  Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

• I did a clean install of Windows 7 teacher instead of an upgrade installation and now I can not activate Windows.

  Setup for Win 7 Prof error can not activate.

  I did a clean install of Windows 7 teacher instead of an upgrade because of idiocy. Now it does not accept my product key. Is it possible to set which does not imply a costly phonecall?
  Partial product key: PW487
  License status: Notification
  Reason for the notification: 0xC004F009 (grace period expired).
  Remaining Windows rearm count: 4
  Trust time: 19:51:25 08/02/2012
   
  Try the Activate by phone:
  
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• (64-bit capable) 32 bit Vista Home Premium... I can do a clean install of Windows 7 64-bit professional?

  (64-bit capable) 32 bit Vista Home Premium... I can do a clean install of Windows 7 64-bit professional?... from a flash drive?... to change the boot order?... or at all?

  Hello

  That's right; with Vista Home Premiun upgrade paths are for Windows 7 Home Premium or Ultimate.

  It is one of the reasons why you should do a clean install.

  The other reason is that you can NOT put 32-bit to 64-bit.

  You need a clean install to do.

  Follow these steps before you install or buy Windows 7:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  _________________________________________

  And it's a way to do the clean install of Windows 7 DVD forn and Flash Player

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  Using the USB method:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  See you soon

• A new system with a clean install of Win 7 64 bit Pro. Try to install win XP virtual machine.

  A new system with a clean install of Win 7 64 bit Pro.  Try to install win XP virtual machine. The virtual machine "put" file installs and then restarts.  During the configuration phase it reboots it gets 94% done gives a message 'update failed' and said that no files have been modified.  I redownlaoded the file and reinstalled several times.  I changed the bios to make sure that hardware virtualization is enabled.  All tests that microsft has said that my Machine is fine.  However I can not get the software\update of the virtual machine in order to install properly.  Any thoughts?  Thanks in advance.  Bruce

  Hi Bruce,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

   

  Hope this information helps.

• How to install windows xp 32 bit on hp dv6-6117tx lodge and application download driver on windows xp

  How to install windows xp 32 bit on hp dv6-6117tx lodge and application download driver on windows xp

  Hello

  Please read the XP downgrade useful guide at the link below

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/General-XP-downgrade-Guide-for-HP-laptops/TD-p/83267

  The guide details for your series model are in the section called 3. Dwas Modelisation

  Paul

• Driver for SM bus controller is not install

  My hard drive of laptop DV6 - 6173cl failed.  I replaced the (1 terabyte) hard drive with an older and smaller (120 GB) I still have an old HP laptop hard drive and reloaded Windows 7 (64 bit) OS.  Still have a lot of disk space.

  Other devices - SM Bus controller driver is not loaded and does not load when "update driver software" is requested. I tried to 'turn off' and restarted the system – still no driver.

  I read something on identify the chipset and get the driver from the manufacturer-, but the instructions indicated to me the 'display' (Intel HD Graphics r) chipset, and comes under the graphics card in the Device Manager, as well as graphics Radeon (TM) HD 6770 M card.  Both have working drivers.

  I'm NOT a person tech in every sense of the word - I understand little or nothing of the workings and the interactions of these different elements.

  I looked online inside the laptop for the drivers for SM Bus controller.

  I can't find any help with everything I read, like say more just go and "update your driver.

  Can someone help me?

  Hello

  Please use the followin driver for SM Bus controller:

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55095.exe

  For video, the two work so please don't break them.

  Kind regards.

• Clean install of windows 7, now I have no permission to copy on external hard drive.

  I have a HP media center 2005 office which originally had XP on it. I bought an upgrade Windows 7 years and installed and never had a problem. Two weeks ago I reformatted my computer to get rid of a redirect virus, and everything seems to work perfectly except for one thing: my C: drive and both of my external hard drives, K:, and M: require administrator privileges to copy/paste/modify anything.
  When I did a clean install it automatically gives me an admin account.

  My question is, what can I do to change the permissions and security settings, while I have a total control over EVERYTHING. I recently tried video file on my external drive and he told me that I needed permissions and click ok to try. But he did nothing.

  I want access to all of my files. Drive C and the two external. I noticed that the security options when I consult my files or directories where showing these accounts:

  SYSTEM
  Josh (Josh-PC\Josh)
  Administrators (Josh-PC\Administrators)
  Everyone

  and I was getting a SID that is long enough

  There are a lot of files, but one in particular that made me on this hunting witch was changing my user profile file in Firefox. I did a clean install and wanted to change the shortcut menu in firefox, but also a few other settings.
  This just happened to reside in C:/documents and settings /

  The recipe is the same as before: take ownership of the problem folder. It make recursive so that you don't need to treat each case separately.

• Missing Ethernet, network controllers SM Bus and PCI device after a clean install of Windows 7 64 bit

  Hello friendly folk,

  I got a used HP Pavilion G6 - 1C40CA.

  There was a clean install of Windows 7 Home Premium 64-bit.

  After searching around online, got a hint of what to do.

  For Device Manager are missing or not that there is not (small yellow exclamation triangle):

  Ethernet controller (Hardware ID: PCI/VEN_10EC & DEV_8136)

  Network controller (Hareware ID: PCI/VEN_14E4 & DEV_4727)

  PCI device (Hareware ID: PCI/VEN_10EC & DEV_5209)

  SM Bus controller (Hardware ID: PCI/VEN_1022 & DEV_780B)

  As well as to find good downloads, I know not to order that I should be their installation (if there is a specific order at all), and if I have to restart every time that I have install something again.

  If someone could be kind enough to drive me very precisely by the process? Pretty please? ^_^

  Hello:

  The first pilot, you need to install is for the smbus controller.

  Download and install the amd chipset drivers and restart.  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Here's the rest of the drivers you need in the order you posted the material ID's, and you can install them in an order any that you like...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100084-1&cc=us&DLC=en&LC=en&OS=4063&product=5173139&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-95652-1&cc=us&DLC=en&LC=en&OS=4063&product=5173139&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100083-1&cc=us&DLC=en&LC=en&OS=4063&product=5173139&sw_lang=

• Can I use a product key UPGRADE from 32-bit Windows 7 to a new clean install of Windows 7 64-bit?

  In 2009, I upgraded my laptop from Vista to Windows 7 32 bit. This laptop recently died and is no longer in use.

  I am building a new computer and I want to install it on Windows 7 64 bit (there no initial operating system because it is a made to measure machine).
  Can I install Windows 7 64 bit on the new machine and then use the old product key, that I received in 2009, even though it was a upgrade for the 32-bit product key?

  If its a version upgrade, the answer is no.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• Re: How to install driver for SM Bus controller?

  I have the yellow warning against the Sm Bus controller triangle in Device Manager when I try to update the driver it is not found can help you. I did a search on the forum for SM bus controller nothing helps.

  See you soon
  Blanketstacker

  If you want to discuss these problems you must provide some basic information like the model of laptop and operating system preinstalled, so we can check the Toshiba download page and see which driver is available here.

  Furthermore, have you installed driver right chipset for your machine and your preinstalled operating system?

• Re: Satellite L650/0E8 - clean install with Windows 7 64 bit

  Hello.

  I recently bought a [Toshiba L650/0E8 laptop | http://www.mytoshiba.com.au/products/notebooks/satellite/l650/psk1ja-0e8017] and accidentally installed the 32-bit version of Windows 7.

  I saved an image of "recovery" from my computer in 4 DVD-R using Toshiba Recovery Media Creator. I need to use Adobe Master Collection CS5, but this requires the 64-bit edition to use first Pro CS5 and After Effects CS5. I've put together by reading some articles on the net that I have to do a 'clean' install, but as I've always had a technician set up my computer and have never used a Toshiba laptop before, I'm unaware on how to backup all my files, programs, drivers, etc. before reinstall Windows 7 to a 64-bit version.

  -What do these recovery DVD? Is there anywhere I can download the software/drivers for the 64-bit version Toshiba? I apologize if these questions sound really stupid. Honestly, I'm rather confused as to what to do.

  Hey,.

  First of all I have to say it s even though you created the Toshiba recovery disc as mentioned in the user manual. :)
  Some other users here forget it because they don t read their user's manual.

  Anyway, with this record, you can restore the pre-installed Windows version (Windows 7 64 bit) with all the drivers and tools. That means you n t need additional drivers and Toshiba, all tools will be installed automatically. You get out of adjustment of the rear housing.

  But if you use the Toshiba Recovery disk it will wipe the entire HARD drive, then you will need to make a backup of all your important files that you should always after installing Windows.
  This is why I would recommend an external HARD drive. They offer a lot of space to save all your data and with some models, you also backup software, but you can also use the built-in Windows backup tool, it s also nice and works well.

  If you have any other questions, please let us know! ;)

• Clean install of Windows 7: where to find the Dell Foundation Services?

  I'm doing a clean reinstall of Windows 7 on my new XPS-8700.  I downloaded the drivers and the software that is listed for my service on the Dell drivers & download site tag.

  But there are a few "Dell" items listed in my Start Menu > programs that I have not found on the Dell website.  I'm not sure of their purpose, my need for them, where to find download or how to reinstall them after my new installation of windows.

  Dell data services

  Dell Foundation services

  Dell help documentation (Edocs viewer)

  Accidental damage Services Agreement

  BancTec Service Agreement

  Complete care Service of Business agreement

  Consumer in-Home Service Agreement

  Dell Home Systems Service Agreement

  Premium Service Agreement

  QualxServ Service contract

  These items are installed with the Dell SupportAssist program (that I found on the Dell website)?

  I think that service agreements are just PDFs, which I think I've found, but the so-called programs/applications: the data of Dell and Dell Foundation Services?

  Thank you.

  tobymeister,

  The listed items are for your security agreements. They are not installed on your computer and there is no download.

• How to uninstall Windows 7 32 bit or get the clean install of Windows 7 64 bit to work properly.

  Today, I bought and installed windows 7 32 bit as an upgrade from vista 32-bit, shortly after I spoke to my friend and he told me that I could have used the disk for 64-bit and Windows 7 64 bit instead, the problem now is that I can't find a way to remove windows 7 32 bits using other methods I've seen here as the file Windows.old, it isn't here. Also I cannot perform a clean Windows 7 32-bit to windows 7 64 bit installation because when I insert the disk it says that I need to boot from the disk, so I tried then whenever he says failed to load. IM fine with doing a clean install and losing what I have, because I have them the settings and files saved externally already so no need to save again.

  Thank you very much

  Mango

  Looks like you're stuck with a clean install of Vista's original support for start.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• I did a clean install of Windows 10 PRO - how can I activate the desktop mode

  Before I did the reinstall - I had this option when I right click on the task bar to activate the battery icon desktop mode.

  If someone please tell me what a piece of software that I should download to re - activate?

  Thank you!

  There is no Quickset software for this particular laptop - so I went through every download on http://www.dell.com/support/home/us/en/19/product-support/product/alienware-15/drivers and I finally installed "Alienware on Application of on-screen display" - after the restart it was back.

  However, it is not really intuitive.

  Thank you ieee48 and Mary G for big ideas.