did I lose my files if I sync to windows media player?

I have an ativa with music on her mp3 player. I was wondering if I sync my player with my windows media player if I lose all my files? Help, please!

Hello

You just need to be careful.

If you set the MP3 player on MSC then you can copy files to and from it as if it were an external hard drive
(it's what it will be). If you set the MP3 of the PSG, then it can sync with Windows Media Player.

Copy the music files on the MP3 hard disk (not in music files - create a new folder to use)
and then you have backups to use according to your needs.

Set up a device to sync in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

Windows Media Player sync: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • Walkman Sony Sync with Windows Media Player 11

    Windows media player 11

    Accidentally deleted my files music & video. My backup is my Sony Walkman NWZ-S545, that contains more than 7g of music files. How can I synchronize to WMP 11 without fear to erase my walkman?

    Sony said to make sure that I disconnect the Auto Sync feature in my software. Then, after having turned off the feature, connect the WALKMAN to the computer and drag and drop files on the computer.

    Question: How can I disable the Auto Sync feature in my software?

    Help!

    I have:

    IE8

    Windows XP Home Edition (32)

    SP3

    Gateway MX6214 laptopp

    grampsny

    Hi grampsny,

    You can check if this article helps.

    Synchronize your media files to a portable device - Windows Media Player 11 for Windows XP

  • adding new files or remove the old Windows Media Player files. (Vista)

    Since June 2010, I was not able to add new files or remove the old Windows Media Player files.  I can click on a new file and play using WMP or add to a playlist that is currently playing, but it does not recognize that it was added after as I close the program and re-open it.  Or I can delete the files that no longer exist on my computer but WMP always has them as my files.  When I click on add new media, it recognizes the right amount of files I would be adding, says to add them and then nothing is there.

    Your media library has probably been corrupted. To reset, follow the instructions for WMP 11 Vista at http://zachd.com/pss/pss.html#medialibrary . Note the reset of the library will make you lose all the counts to play and possibly ratings too. Tim Baets
    http://www.BM-productions.TK

  • Are there any plug Inns by what mp4 file can be read by Windows media player?

    Original title: Media Player

    Y at - it all plug Inns by what mp4 file can be read by window media player.could someone help me in this problem?

    Hello

    Windows Media Player does not support playback of the .mp4 file format. You can reproduce .mp4 media files in Windows Media Player when you install the decoders compatible DirectShow MPEG-4 packs. For more information, see this Microsoft KB article.

    Information on the types of media files that supports Windows Media Player

    http://support.Microsoft.com/kb/316992/en-us

    Step 1:

    Try to install this pack of code and check if it helps.

    Package of Installation of codec

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=507

    Step 2:

    Also, try searching the Internet. Often, you can go to the codec manufacturer's Web site to download the latest version of a codec.

    THIRD WARNING:

    Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  • How can I transfer video files to the library in windows media player for an external hard drive

    How can I transfer video files to the library in windows media player for an external hard drive. My os is Windows XP Home Edition and I use wmp 11.

    You have to locate the files on your internal hard drive, using the Explorer, then drag and drop them on the hard drive.  If you don't know where they are on your hard drive, right click on the video file in the library and choose the location of the opened file.

  • Sync on Windows Media Player

    I'm trying to sync in Windows Media Player using an SD memory card and also I tried to use the storage Flash Drive (USB).  I clicked the sync up, but there is no recognition of the other.  I've refreshed but without success.  I've wound up Media Player and open again with success.  How can I synchronize to these storage units?

    Hi jchannah,

    1 what the flash card or SD card has been recognized by Windows?

    2 have you tried sync with these devices?

    First of all, you need to configure the device to sync in windows media player.

    For more information see:http://www.microsoft.com/windows/windowsmedia/knowledgecenter/howto/mp11/sync.aspx

    If you can not sync in Media player then try the manual synchronization.

    Sync manually in Windows Media Player

    http://Windows.Microsoft.com/en-us/Windows7/sync-manually-in-Windows-Media-Player

     

    Windows Media Player sync: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot add files to the library in Windows Media Player

    It is not an option to add to my windows media player library. It won't let me transfer my desktop in Windows Media Player. What should I do?

    Hi Jim,.

    Thank you for visiting the Windows Vista Forums.

    Since you aren't able to add items to the Windows Media Player library, you can follow the below provided not, because this problem can occur because the database to library Windows Media Player corrupt.

    1. click on start.

    2. click on run.

    3. type %LOCALAPPDATA%\Microsoft\Media Player.

    4. click on OK.

    5. Select all files in the folder and then click on Delete on the file menu.

    6 Note you don't have to remove the folders that are in this folder.

    7 restart Windows Media Player and check the error.

    Jim, if this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps,

    Click Start.

    Click run.

    Type % LOCALAPPDATA%\Microsoft.

    Click OK.

    Select the Media Player folder.

    Click on Delete on the file menu.

    Restart Windows Media Player.

    Now, Windows Media Player will be automatically rebuilt the database.

    If you find difficulties in following the steps above, you can visit the link provided below for detailed troubleshooting steps.

    http://support.Microsoft.com/kb/925718

    To find out how to add the files to the Windows Media Library, you can check the link below.

    http://windowshelp.Microsoft.com/Windows/en-us/help/60fc17d8-7924-4600-93e8-39873ee2d5e91033.mspx

    Hope this information is useful.

    All the best!
    Thank you and best regards.
    Suresh Kumar-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • wmv or WMA files don't play using Windows Media Player 11

    Windows media player 11

    whenever I double click on any of the file nothing happens. Windows media player does not open. No message is given. nothing happens!

    Hello
     
    1. are you able to open the files by using another player?
    2. don't you make changes before the show?
    3. it's coming with a particular file or all the files?
    4. are you able to open Windows Media Player from start menu, all programs?

    Step 1: We recommend that you change the default music or video recorder. To do this, try the following steps.
    1. open the folder that contains the file you want to edit.
    2. right click on the file that you want to change, and then click Open with.
    3. click on the program that you want to use to open this file automatically.
    4. Select him always use the selected program to open this type of file check box, and then click OK.
     
    For more information, see this link:
    http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-file-types-that-play-in-Windows-Media-Player

    Step 2: Rebuild the media player library.
    If you are able to launch Windows Media Player from the start menu. Try the following steps.
    1. Click Start, type run and press to enter.
    2. in the run box, type %appdata%\microsoft\windows\sendto, and then press ENTER.
    3. in the window, double-click the Local Directory, double-click Microsoft and double click on Media Player.
    4 rename a file named CurrentDatabase_ (*) OLDCurrentDatabase_ (*), where * can be any number.
    5 restart the media player.
     
    Try the steps and post back with the results, so that we can help you further.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.

  • can not sync between windows media player 12 and duets of samsung galaxy y

    How can I sync my music with media player 12 with samsung galaxy y DUN? With my samsung via the port USB is plugged in, I get no notice or action in windows media player.

    Hello

    Thank you for writing to Microsoft Communities.

    Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

    1 - is the device not detected in Device Manager\computer?

    2. are you able to synchronize other devices in windows media player?

    Please go ahead and follow the steps mentioned and later a update on the State of the question.

    Set up a device to sync in Windows Media Player: http://windows.microsoft.com/en-US/windows7/Set-up-a-device-to-sync-in-Windows-Media-Player

    Synchronize music, photos, contacts, and calendars with a mobile device: http://windows.microsoft.com/en-US/windows7/Sync-music-pictures-contacts-and-calendars-with-a-mobile-device

    Windows Media Player sync: Frequently asked questions: http://windows.microsoft.com/en-US/windows7/Windows-Media-Player-sync-frequently-asked-questions

    Please follow these recommended steps and post if you still experience the problem.

  • How can I disable completely sync in Windows Media Player?

    Whenever I connect my phone to my computer, Windows Media Player comes and asks for sync, sometimes resulting in the device not being recognized, so I can't copy files to the phone without having to shut down WMP and reconnect my phone to my computer. This means that I can't enjoy my music and plug my phone at the same time.

    Now, I've seen some answers out there, but they don't really solve my problem. What I want is WMP never synchronize or ask to sync every time I connect a new device, because even if I have to turn off sync for my phone if I then try to plug in my flash drive it ask for synchronization.

    What I want is that the option sync completely disabled for each device, I could connect to the future, not a simple temporary fix. If there is none I'll switch to a different media player.

    I don't don't need or even care for automatic playback. This may help someone, it worked for me, although minimal testing just by using USB flash drives. BTW I use WMP 12 in Windows 7 Pro.

    In the Panel--> view by: small icons--> AutoPlay--> I changed ALL media options and the device of "Non-action" and strangely enough, I kept the check mark for "Use AutoPlay for all media and devices" and now what to open, play, or even synchronize the decisions are totally up to me.

  • Where is the file / save as tab in windows media player 7?

    I want to record video clips that open in the player to drive specific locations as I did in vista under file / save as... all I see is to add to the playlist, but nowhere to save a downloaded file. When I save in the playlist it just records the location of web and recharge and opens the online source file is

    Once in WMP

    To activate the "Show Menu bar".

    The short keys are: Ctrl + M

    or

    The long way:

    Right-click in a blank space between the title of the Windows Media Player window and the words "library, music, artist.

    Click to enable "Show Menu bar".

  • Wave files will not play in Windows Media Player 11

    Windows media player11 will not play files WAV. as:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    1. what exactly happens when you try to play .wav files?
    2 How long have you been faced with this problem?
    3. this happens with a particular .wmv file?

    Step 1: Try to uninstall the codecs that are installed.

    See the below items for more information.
    http://support.Microsoft.com/kb/307895
    http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions (You can also use this article for windows XP)

    Step 2: Auditor of file system (CFS) scan to fix all of the corrupted system files.

    a. click the Start button > run > typecmd.exe and press ENTER.
    b. Type sfc/scannow , and then press ENTER.

    Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

    Information on the types of media files that supports Windows Media Player
    http://support.Microsoft.com/kb/316992

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • MOD (JVC's Everio camcorder file extension) files will not play on windows media player and will not be imported on windows movie maker (on windows Vista Home Basic)

    Hi I have a JVC's Everio camcorder. This unit uses a strange video file extension (is MOD). I try to play these video files on windows media player, but it won't play. I also tried to import these files into windows movie maker, but he won't.
    Please give me a solution. I would be grateful for any ideas.

    Hello, thekissfan

    Please use the Forum for answers!

    I'm moving your message to the sounds and the media.

    Rename the extension .mpg video and see if you are able to view them.

    If this is not the case, check with JVC for instructions on how to edit video files.

    I hope this helps.

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If a post has solved your problem, be sure to mark it as a response and if there is a useful message, don't forget to vote as useful for helping others find easier solutions.

    ======================================
    Yes, rename the files MOD xxx.mpg worth trying...

    If this does not work... you need to convert a compatible
    format like .wmv. The following links would be useful
    at a glance:

    Movie Maker 2 - importing files MOD
    http://www.Papajohn.org/mm2-importing-video-mod.html

    Movie Maker 2 - Import MPEG files
    http://www.Papajohn.org/mm2-importing-video-MPEG2.html

    Movie Maker 2 - video import from drives
    http://www.Papajohn.org/mm2-importing-video-discs.html

    How to edit JVC. MOD files in a few easy steps
    http://www.YouTube.com/watch?v=ZY-cKaCEUJ4
    John Inzer - MS - MVP - digital media experience

  • Adding a file to the library in Windows Media Player 11.

    I can't understand how to add a music file to the library.  The only option is to add a folder.  Help.

    Hello

    Items can be added to Windows Media player by adding a single file or by adding a folder.
    Check out the link and follow the steps.
     
    You can also read the FAQ on Windows Media player. Check out the link.
     
     
  • EA4500 Windows 7 can not index the files so not seen by Windows Media Player

    I install a drive on the USB port of the EA4500 and 4 files.  A music course.  I want to access this folder through my laptop wireless with Windows Media Player, but I don't get a handle on disk + 3000 songs.  A PC cable can access files, but not a wireless laptop.  I don't know where is the problem.  If I use the reader via //host/Music the star ratings are not available, but I get all the music, if I map a drive can I get star rating but only a handful of songs.  I tried to change the permission, but I can't change the permissions of the file on the Linksys.

    You should be able to change the permissions on the page of the router. Using the classic Firmware or the Linksys Smart Wifi? If you use the firmware Linksys Wifi Smart, it is under the USB storage device > access to records. If you use the classic Firmware, it's under storage > Administration. The laptop should be able to see all the files just like the office.

Maybe you are looking for