Difference between display and iMac Thunderbolt

What is the difference between Thunderbolt display and iMac, in terms of display quality? It seems to be too expensive compared to the latter? Although the iMac 27 "is 5 k and Thunderbolt Display is just HD?

The standard iMac has the same resolution as the TBD.  Only the retina iMac is sharper, but can be difficult to tell the difference on most of the images.  You can get the exact specs on Apple's site.

Tags: Peripherals

Similar Questions

  • Qosmio X - 70A - difference between nVidia and driver Toshiba GPU

    Is there a difference between nvidia and one packed by toshiba display driver?
    I'm using the Toshiba but Geforce experience gives me a headache with warnings about a newer driver and toshiba does not appear to provide a.

    Of course there is a difference between the GPU nVidia drivers (or drivers provided by manufacturers of graphics cards) and the drivers provided by Toshiba.

    The Toshiba driver page GPU drivers are changed and made for the mobile use.
    Each laptop model supports various components (CPU, cooling, modules, etc.) and different design. That is why the heat dissipation is always different.

    The GPU driver provided by Toshiba supports a kind of GPU overheating protection and protects the graphics chip of the damage. This means that the GPU performance are controlled by the driver and in case the internal temperature would rise to critical level, it would decrease the performance of the GPU. Also the laptop stops automatically if the temperature is too high.

  • Differences between archiving and off of a qualitative research within the Admin Data Toolbox.


    Hello

    Can you please let me know what could be the difference between archiving and the deactivation of the Qualitative research in data Admin Tool Kit.

    Thank you

    Rohini M

    When you idle or archive anything it is no longer available for selection.   The difference between inactive and the archives, it's inactive items still appear available for the fine items while searching of archive will not be.

    Allows so that you have the following to say:

    List A

    -Article 1

    -Article 2

    List items

    If you were to inactivate the point 1, end-users is more would see can be selected when you use the extended qualitative attribute.  However when they are looking for specifications based on the extended attribute, they would still be able to select 1 point, whereas they could find objects that this value was used. If you archive Item 1, end users should display it no longer available for selection from anywhere - including research.

    Lists

    If you were to inactive or archive the whole list, you would see is no longer available for selection when the establishment of a qualitative research of extended attributes.   I don't think that there's nowhere you can search for extended attributes by the list of research currently out of the box so that they would act similar.  Is there a place to find attributes extended by the search list and then he would follow the same rules as above.

  • What is the difference between 'place' and 'add files to download' in Muse CC?

    Hey guys... What is the difference between 'place' and 'add files to download' in Muse CC?

    Thanx

    You place the images to display on your site.

    You add files to download and make them available for download by visitors to your site.

    For example, you can add a PDF document, a Word document or whatever you want. These files are not displayable on your site, but you can link with the Hyperlink command to a button to make them available for download by visitors to your site.

  • Explain the difference between OIA and Global users

    Hi all;

    I have question: explain the difference between OIA and Global users

    smbd explain this issue?

    --
    Eugene

    Globalusers are your HR users typically & stored in the table globalusers-> http://wikis.sun.com/display/OIA11gDocs/GlobalUsers+Module

    While the OIA users are users with access to the OIA console for example certifiers etc & stored in the RBX tables *-> http://wikis.sun.com/display/OIA11gDocs/Security+Module#SecurityModule-RBXUSERSTable

  • Model DW: a difference between Design and Live View mode

    Hello

    I am trying to create a model DW. There is difference between mode and Live View. The model contains only a list of navigation style. In Design view, the list is displayed vertically - what is incorrect. In Live View mode, that the list is displayed horizontally - correct.

    Is there something wrong with the model? How to achieve a coherent vision in both?

    design_view.png

    live_view.png

    My model code is:

    < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
    " < html xmlns =" http://www.w3.org/1999/xhtml ">
    < head >
    < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
    <!-TemplateBeginEditable name = "doctitle"-->
    < title > Dreamweaver Test < /title >
    <! - TemplateEndEditable - >
    "" < link href = "... / theme.css" rel = "stylesheet" type = "text/css" / >
    <!-TemplateBeginEditable name = "head"->
    <! - TemplateEndEditable - >
    < / head >
    < body >
    < div id = "WrapperPage" >
    < div id = 'mainNav' >
    < ul >
    < li > < a href = "#" > Menu option < /a > < /li > < li > < a href = "#" > Menu option < /a > < /li > < li > < a href = "#" > Menu option < /a > < /li > < li > < a href = "#" > Menu option < /a > < /li > < li > < a href = "#" > Menu option < /a > < /li > < li > < a href = "#" > Menu option < /a > < /li >
    < /ul >
    < / div >
    < / div >
    < / body >
    < / html >

    The theme.css code is:


    {#mainNav}
    background-color: black;
    height: 3em;
    margin: 0;
    } ul {} #mainNav
    list-style-type: none;
    padding: 0;
    margin: 0;
    }
    #mainNav ul li {}
    height: 3em;
    display: inline-block;

    list-style-type: none;
    }
    #mainNav ul li: hover {}
    text-decoration: none;
    color: #cccccc;
    text-transform: uppercase;
    background-color: gray;
    }
    #mainNav a: link, #mainNav a: visited {}
    text-decoration: none;
    color: #cccccc;
    line-height: 3em;
    text-transform: uppercase;
    }
    #mainNav a {}
    padding: 20px 10px;
    }

    Oops - sorry.  Copied the wrong code.

    Try this CSS-

    {#mainNav}

    background-color: black;

    margin: 0;

    overflow: hidden;

    }

    #mainNav ul {}

    list-style-type: none;

    padding: 0;

    margin: 0;

    }

    #mainNav ul li {}

    height: 3em;

    line-height: 3em;

    float: left;

    }

    #mainNav a {}

    Display: block;

    padding: 0px 10px;

    text-decoration: none;

    color: #cccccc;

    text-transform: uppercase;

    }

    #mainNav a: hover {}

    background-color: gray;

    }

    I have re-arranged things and corrects some redundant/unnecessary styles.

  • Difference between regular and view payments

    I am new to finance. I have it here are details

    What is the difference between ap_payment_schedules_all and ap_payment_schedules_all. all I know the invoices that have been paid will be stored in ap_invoice_payments_all and schedule all payments will be stored in ap_payment_schedules_all. But deadlines will be paid after a few times a day. so I think that those who will be stored in ap_invoice_payments_all right?
    Once the payment is made, then even these bills will be stored in ap_payment_schedules_all? or it will be purged?

    Circumstances in which we will see bills on the tab schedule payments in the form of the invoice?

    Circumstances in which we will see invoices tab display payments in the form of the invoice?

    It would be great if any finance guru, explains.

    Thank you!!

    Hello.

    You are welcome.
    I mean that a Bill will be debriefed on ap_payment_schedules_all as soon as it is saved. There will be a report on ap_invoice_payments_all after paying.

    Octavio

  • Difference between getRowCount() and getFetchRowCount()

    Hello


    What is the difference between getRowCount() and getFetchRowCount()?
    and where to use this method.

    Thank you and best regards,
    Jean Blaise

    Jean Blaise,

    getRowCount() causes the whole view defined subject line must be extracted from intermediate level.

    getFetchRowCount:-This tells us the number of lines that have been recovered in all lines, and not pull additional lines in some of the other methods 'get count' will love.

    That said, if you have a table with a default row area of say 10 lines per page, then fetchrowcount will display 10 at a time and getrowcoutn will show whole row in VO.

    int fetchedRowCount = vo.getFetchedRowCount (); Print the number of line exposed in a table at the same time

    vo.getRowCount (print as many rows in VO)

    Thank you
    -Anil

  • Difference between 'Reload' and "Reload (Override Cache)"?

    Https://support.mozilla.org/en-US/kb/keyboard-shortcuts-perform-firefox-tasks-quickly#w_navigation, what is the difference between 'Reload' and "Reload (Override Cache)"? What makes "ignore cache"?

    Reloading Web pages and cache bypass aims to obtain a new copy of perhaps obsolete or damaged files currently stored in the disk cache.
    You can do it like the first attempt if a normal charging does not seem to provide a version of a Web site or if you are having problems with a Web site otherwise.

    We usually have advice that if you have questions:

    Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

    • Hold down the SHIFT key and click the Reload button
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Command + shift + R' (Mac)

    Clear the cache and delete cookies only from Web sites that cause problems.
    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if an extension or theme (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problems.

  • is there a difference between 38 and 42mm with their pixel density?

    is there a difference between 38 and 42mm with their pixel density? the 38mm and 42mm watches have same interns?

    You can see the technical details of the Apple Watch here. Apple - Support - technical specifications

  • What is the difference between extensions and Plugins and Add-ons?

    I'm sorry if here is not the right place for this post.

    What is the difference between extensions and Plugins and Add-ons? Apparantely, they differ in some sense or aspect, but I do not know how. Please, if it is not too complicated, explain in detail and simple language. Thanks in advance to 1 million.

    Kind regards
    Danesh

    Hi Danesh,

    You should take a look at this article for an explanation. Plugins and extensions are essentially types of Add-ons as well as of the characters and themes.

    Hope this helps!

  • What is the difference between Firefox and Namoroka 64-bit? I have a 64-bit computer. Which should I use?

    What is the difference between Firefox and Namoroka 64-bit?
    I have a 64-bit computer. Which should I use?

    The officially supported only is Firefox - which is your best choice, unless you want to test the new features...

    http://www.Mozilla.org/en-us/Firefox/new/

  • What is the difference between dawn and the beta?

    What is the difference between dawn and the beta?

    Beta is the next version of Firefox that is due to be released in 5 weeks, and Aurora is the one after that--like an Alpha version of development.

  • Difference between valuation and putting in good shape?

    What is the difference between recovery and formatting?

    I need to download tools and utilities to perform the recovery?

    Recovery recovery image installation.
    Formatting of removal of content from disk HARD integer.

    No, you don't need any download. All you need is CD/DVD recovery for your laptop model.

    To be honest, your questions are a bit funny. If you want to have accurate on such things information please publish your laptop model and it will be much easier to give you exact explanation and instructions how to use recovery CD/DVDs.

  • Difference between Satellite and Satellite Pro L100

    What is the difference between satellite and satellite pro? for example - satellite L100 175 and satellite pro L100 176?

    Hello

    the difference between Satellite and Satellite Pro is the operating system:
    Windows XP Home Edition for Satellite
    Windows XP Professional for Satellite Pro

    The difference between the models L100-xxx is just the equipment.
    For example the CPU:
    Sam L100-175: Core Duo T2500; 2.0 GHz
    Satellite Pro L100 176: Core Duo T2400. 1.83 GHz
    For more details look into the specifications of the models.

    Good bye

Maybe you are looking for

  • IMAQ Unflatten string image

    Hello I use the IMAQ flatten image for the vi string to flatten an acquired image and write it to the binary file. Later, when I read the binary file and try with it chain unflatten, I get an error message: 74 error to Unflatten channel into frames g

  • Exchange 2003 Server kept receiving unknown Email sending out through SMTP and the paper jam in the queue folder

    Hello Sir, I have a problem with one of my SBS Exchange 2003 servers. At first, I was getting a lot of 3008 errors for a non-delivery report with a status code of 5.0.0 was generated for recipient rfc822; address email is removed from the privacy * a

  • Recovery Acer Aspire V3 disc question

    Hello Recently, I used a set of recovery disks on my Acer Aspire V3 because I had problems starting Windows. I am currently using this laptop and it's incredibly slow well only barely nothing installed on it. That, as well as other issues lead me to

  • hp1050 scanner does not earn 8.1

    just upgraded to win 8.1 I have a printer HP deskjet 1050 all in one. printer works fine. scanner does not work. is HP upgrade compatibility still not working or even recognized. need help bad George

  • Failed to add eBooks to Adobe Digital Editions

    Nice dayI can't add a few old books I downloaded of ADE. It keeps giving me an error stating that the license is already filled by another user. I am the only user using identifier Adobe I tried to UN-authorize and then re - allow, but it did not wor