Difference between viWrite and imgSessionSerialWrite for MSVC

You are using MSVC ++, I read that you can access the serial ports on the card using imgSessionSerialWrite imgSessionSerialRead located in the niimaq.h. But they are without papers and unsported. VISA of NOR has also viWrite and viRead including alsos for communication series through the Commission. NEITHER gives samples using viWrite in the VISA, but not for the imgSessionSerialWrite functions. Anyone know the difference between the use of one or the other?

I use a PCI-1428, and I'll try to move this message once I have validated that line of email support OR:

Unfortunately, you will not be able to use the VISA controls to communicate with your camera via the Camera Link connection. The framegrabber does not have a serial port that can be targeted in the traditional sense of the term and can therefore be used by VISA or any other typical programs like HyperTerminal.

In addition, people can try to use the generic series commands in the standard Camera Link,

http://www.vision1.com/pdf/CameraLink5.pdf.

So I guess I have will attempt to use the low level imgSessionSerialWrite functions to control the camera.

Tags: NI Hardware

Similar Questions

  • Difference between DAQ and DAQmx for acquisition of data PCI 6534

    Hello

    I use the PCI DAQ 6534 card for my digital I/o transfer. I am beginner in the labview.

    I want to store the data coming in memory and the reading of the data at the level of the trigger.

    I have seen the examples in the labview. Some have used DAQmx and DAQmx read write that screws and some have used the confg DIO port and all...

    So I want to know the difference between these two. For my application that I use?

    Hey Bo,

    First of all, I would recommend that you discover the NI 6533/6534 for NOR-DAQmx help. You may be able to find some of your answers in this help document. Now for what you try to do in your application, it looks like you are only buying data. If this is the case, with the 6534, the device acquires data in memory shipped as soon as the DAQmx series start task VI, as long as you don't start hardware triggers have in place. If you have a trigger of starting material, then will make the purchase of the aircraft after the DAQmx start task VI and only after you receive this material trigger. If you call not the DAQmx Read VI, then the data will be stored in the memory board for you, as the driver manages this data in the on-board memory storage, until reading DAQmx VI is called, which at that time, data is transferred to the Board of Directors in the memory of the computer. Once you get it in the computer's memory, you can do whatever you want with these data, as this graph or treat. If you look at the sample programs (which have been mentioned on how to find those in a previous post), you can find an example that little shows you how it works. One of the examples that you can check is called reading Dig Port-Ext Clk.VI. In this example, it sets up to read a finite number of samples and then starts the task. If you set a breakpoint on the line of the error after the VI begin, the data will be acquired in the amount of on-board memory. Then when you cancel the break of the VI, data will be extracted from the amount memory embedded in the memory system with the reading VI DAQmx. Again, the pilot takes care to put the data in the memory board for you once you start the task.

    I hope this helps. Please let us know if you have any questions or concerns about this issue. Also, certainly, discover and try to run all the programs related to the 6534 examples so that you can learn how the equipment works and how to use features to do what you want your program to do. Also, be sure to read through the help on the 6534, as well as the help of VI documentation to learn what makes each function. Thank you and have a nice day.

    Kind regards

    DJ L.

  • What is the difference between redundancy and recovery for retention window?

    Hi all

    I'm still trying to get a grip on this concept of planning RMAN backup.

    I recently came across a situation like this.

    I have backups on a redundancy of 1.

    I have instance1, who had a job of GRID to run backups RMAN as follows

    Database incremental level = 0 a week at sea at 02:30
    I have backups daily, incremental level = 1 every night
    I have backups of the log of the archives through the day.

    What happened, was apparently on a TUE some time, the development team remove data in almost all of the tables in the schema.
    The this didn't discover until noon or so on Wednesday.

    I went to try to restore... and RMAN could not do. I had found a SNA for early TUES, they did... but I got the following error:

    RMAN > RUN
    2 > {}
    3 > SET up to this THAT SNA 4590383198282.
    4 > RESTORE database;
    5 > RECOVER DATABASE;
    {6 >}

    executing command: SET until clause

    From restoration to the 28 April 10
    allocated channel: ORA_SBT_TAPE_1
    channel ORA_SBT_TAPE_1: SID = 639 device type = SBT_TAPE
    channel ORA_SBT_TAPE_1: NMO v4.5.0.0
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID = 638 type device = DISK

    File number of the data file = 1 name=+DATADG/instance1/datafile/system.284.697137287
    RMAN-00571: ===========================================================
    RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
    RMAN-00571: ===========================================================
    RMAN-03002: failure of the command restore at 2010-04-28 15:53
    ORA-01180: cannot create the data file 1
    ORA-01110: data file 1: '+ DATADG/instance1/datafile/system.284.697137287 '.

    What I did... of research, it seems that since I don't have a level 0 incremental of before, he could not reset the database in time. Precedent has been removed since, I guess I had a redundancy of 1.

    So, I thought that I had a week of backup they way I put it... but that assumes that the errors are found fairly quickly before the next level = 0 backup.

    I want at least 1 to 1.5 weeks of worth of backups. I have the problem that we do have many tapes in rotation, so I can't go because too long..may 2 x weeks at the top.

    I'm revising my strategy, but I am confused that I read about the difference between retention RMAN setting with window of recovery / redundancy.

    Can someone give me an explanation how do you understand? I read on the web and in books to oracle, and for some reason, it is not clear to me what is the best way to go... especially when I see this window of redundancy and recovery can affect?

    Thank you in advance,

    Cayenne

    Redundancy = 1 means rman will mark any more old than the backup of the last full or incremental backup of level 0 as obsolete. So it is very likely that the backup that you need for this restore has been removed after work Wednesday morning.

    The recovery window will tell rman to keep (or not obsolete brand) all necessary backups to restore to any point in time in the recovery window.

    Bjoern

  • What is the difference between "stop" and "suspend" for the deployment of the procedure?


    I'm running corrective plans and want to be able to suspend the proceedings and resume later.  I "stop" or "suspend"?

    Yes - the docs is misleading, I'll file a bug with the doc on this one here.  Stop cannot be resumed. Only suspend.  Thanks for the comments.

  • What is the difference between education and reduction for existing customers

    I am a student so existing a customer. the price would be the same for me with the new promotion. What would be a better route to register as? with the delivery of existing customer, I know that the price will go up after a year. What happens in the educational version after a year? are there other differences that I should know about?

    Hi Mrtunes,

    I see no significant difference.

    Here is a screenshot of terms billing to register for the course educational (US store)

    (click to see larger)

    -Dave

  • Difference between 'Form' and 'object '.

    I am writing today a guide in my native language and want to understand the difference between 'Object' and 'Form' for Illustrator. We have menu object in the Panel and can find a few options of forms under this menu.

    Also we program this object is:

    In computing, an object can be a variable, a data structure, a function or a methodand as such, is a location in memory value and possibly referenced by an identifier.

    In class-based object-oriented programming paradigm, 'object' refers to an instance of a class where the object can be a combination of data structures, functions, and variables.

    Relational database management, an object can be a table or column or an association between data and entity of database (such as the age of a person concerning a particular person). [1]

    So my question is: If we create a form in artificial intelligence can we call it 'object' and vs. ?

    There is menu item "Create object mosaic" option which works only with raster images. This is why any other object in artificial intelligence is not object?

    Thank you

    "In illustrator is an 'Application based on the objects' any item placed in the drawing area that you can select is called" object "where as".

    a form is an object of two dimension.

    We could say : each form is an object , BUT not every object is a form.

  • difference between VR and Veeam

    Hi all

    Hello

    What is the difference between vr and veeam for synchronization? Just for machine replica and sync?

    When you retrieve the VM will retrieve the most recent replica (no GAP) and 24 stands will appear as snapshots in the Snapshot Manager.

    Then you would choose the snapshot you want to come back, select it and 'come back' and delete any copies remaining.

  • Difference between 'Reload' and "Reload (Override Cache)"?

    Https://support.mozilla.org/en-US/kb/keyboard-shortcuts-perform-firefox-tasks-quickly#w_navigation, what is the difference between 'Reload' and "Reload (Override Cache)"? What makes "ignore cache"?

    Reloading Web pages and cache bypass aims to obtain a new copy of perhaps obsolete or damaged files currently stored in the disk cache.
    You can do it like the first attempt if a normal charging does not seem to provide a version of a Web site or if you are having problems with a Web site otherwise.

    We usually have advice that if you have questions:

    Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

    • Hold down the SHIFT key and click the Reload button
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Command + shift + R' (Mac)

    Clear the cache and delete cookies only from Web sites that cause problems.
    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if an extension or theme (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problems.

  • What is the difference between extensions and Plugins and Add-ons?

    I'm sorry if here is not the right place for this post.

    What is the difference between extensions and Plugins and Add-ons? Apparantely, they differ in some sense or aspect, but I do not know how. Please, if it is not too complicated, explain in detail and simple language. Thanks in advance to 1 million.

    Kind regards
    Danesh

    Hi Danesh,

    You should take a look at this article for an explanation. Plugins and extensions are essentially types of Add-ons as well as of the characters and themes.

    Hope this helps!

  • Difference between valuation and putting in good shape?

    What is the difference between recovery and formatting?

    I need to download tools and utilities to perform the recovery?

    Recovery recovery image installation.
    Formatting of removal of content from disk HARD integer.

    No, you don't need any download. All you need is CD/DVD recovery for your laptop model.

    To be honest, your questions are a bit funny. If you want to have accurate on such things information please publish your laptop model and it will be much easier to give you exact explanation and instructions how to use recovery CD/DVDs.

  • Qosmio X - 70A - difference between nVidia and driver Toshiba GPU

    Is there a difference between nvidia and one packed by toshiba display driver?
    I'm using the Toshiba but Geforce experience gives me a headache with warnings about a newer driver and toshiba does not appear to provide a.

    Of course there is a difference between the GPU nVidia drivers (or drivers provided by manufacturers of graphics cards) and the drivers provided by Toshiba.

    The Toshiba driver page GPU drivers are changed and made for the mobile use.
    Each laptop model supports various components (CPU, cooling, modules, etc.) and different design. That is why the heat dissipation is always different.

    The GPU driver provided by Toshiba supports a kind of GPU overheating protection and protects the graphics chip of the damage. This means that the GPU performance are controlled by the driver and in case the internal temperature would rise to critical level, it would decrease the performance of the GPU. Also the laptop stops automatically if the temperature is too high.

  • Difference between Satellite and Satellite Pro L100

    What is the difference between satellite and satellite pro? for example - satellite L100 175 and satellite pro L100 176?

    Hello

    the difference between Satellite and Satellite Pro is the operating system:
    Windows XP Home Edition for Satellite
    Windows XP Professional for Satellite Pro

    The difference between the models L100-xxx is just the equipment.
    For example the CPU:
    Sam L100-175: Core Duo T2500; 2.0 GHz
    Satellite Pro L100 176: Core Duo T2400. 1.83 GHz
    For more details look into the specifications of the models.

    Good bye

  • What is the difference between AXIEM and EMSIght? What are the benefits of AXIEM by EMSight if any?

    I wonder what are the differences between AXIEM and EMSight. Are associated with application? One is better than the other? Please explain.

    AWR estimated AXIEM most powerful plan EM Simulator around.   AXIEM is at the center of continuous research and improvement, while EMSight is only worked on if revealed serious flaws.  Here is a summary of the differences:

    Mesh

    • EMSight must mesh the nearest grid drivers using rectangles.  This causes the mesh to have more elements mesh when there are small and large geometries.  The grid should be small enough to capture the small geometry but then causes large geometries to mesh more.   In addition, angled or curved structures causes inefficiencies mesh.

    • AXIEM STS forms, rather than a grid.  In addition, the mesh can be rectangle or triangle.   This allows a much more efficient mesh.   AXIEM generally have a much more efficient

    • AXIEM contains the ability to process forms to clean geometries that cause inefficiencies of the mesh.  EMSight does not have this feature.

    • AXIEM can forms thick metal mesh, EMSight can not, and user must make approximations when thick metal will change coupling (loss is recorded properly with the thickness of the metal)

    Ports

    • The ports are for the most part similar, but parasites due on AXIEM ports are less.  In addition, the AXIEM has a side wall, thus the effects of not move of the terms of reference of the edge of the line are a lot less AXIEM in.

    • Ports can be added to most any place in geometry with AXIEM.  For EMSight, the ports are usually only added outside the geometry and have limitations to the aircraft on either side of the reference speaker.

    Problem solvers

    • EMSight does not have a low frequency Solver.  Stop low-frequency and then extrapolate to DC.  This usually works well, but you must take into account if the extrapolation is accurate.  AXIEM presents both a low and high frequency Solver so will do better in a low frequencies generally much better in DC.

    • Solver of EMSight scales O (n) ^ 2 for memory and O (n) ^ 3 for the moment.   It has a special algorithm to break the question of memory, but the question of time is the killer.  AXIEM has a direct Solver which scales in the same way and an iterative Solver which will scale O (nlogn).   In other words, AXIEM can solve a lot of bigger problems than EMSight.

    • Several AXIEM processes are multithreaded as EMSight.

    Speaker

    • EMSight is inside a perfect driver side wall.   This works well if you the circuit is in the same cavity.  If not, you must know the rules of them on to the forms of space of the flanks and how that much to extend the port could reference planes.   AXIEM is not here.   AXIEM does not currently have to simulate a perfect driver side wall.

    I don't know that I missed a few aspects of the tools.   From the point of view of the AWR that AXIEM is the tool of choice, except in a few cases have been EMSight may be required.

  • What is the difference between nc6320 and nx6320 laptops?

    What is the difference between nc6320 and nx6320 laptops?

    Can I use the same drivers for each of them?

    Hello:

    There is not much difference.

    If you want to compare all the details you can check this link:

    http://h18000.www1.HP.com/products/QuickSpecs/12428_div/12428_div.PDF

    You can probably use the same drivers for either, but they all have both their own support pages and separate driver.

    nc6320:

    http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1839154&lang=en&cc=us&TaskID=135&prodSeriesId=1839146&prodTypeId=321957

    NX 6320:

    http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1839169&lang=en&cc=us&TaskID=135&prodSeriesId=1839144&prodTypeId=321957

    Paul

  • Difference between hp7612 and hp7610 the printer?

    Hello
    I intend to buy a jet A3 office printer.
    Can someone tell me what is the difference between hp7612 and hp7610 the printer?
    Help, much appreciated.

    Hello

    The HP Officejet 7612 include a duplex unit to print on both sides of the page automatically in the box.

    For the HP Officejet 7610, it's an extra accessory that can be purchased separately and not included in the Cabinet.

    Other than the two models are identical.

    Kind regards

    Shlomi

Maybe you are looking for

  • MacBook Pro, early 2011 / replacement?

    I have a 15 "MacBook Pro, since early 2011. I discovered that the battery will not hold a charge. Is the solution just a new battery? Which is something I can easily do myself. I don't want to say that this is not not a value just like a certain stor

  • HP Photosmart 5620 all-in-one: cannot download driver Windows 10

    Printer has been disconnected, when I tried to reinstall, I received a message that the installation has failed. Tried to delete and reinstall, same result. I had this problem when I got to 10 Windows, but I don't remember what I did to solve the pro

  • How to calibrate color on hp pavilion with windows 10 g7-2202

    Hello! How to calibrate color on hp pavilion with windows 10 g7-2202?  I am a photographer with limited funds, so I can't buy a dedicated monitor again.  I would like to get the best possible colors before it goes to print.  I got prints back that do

  • GigE camera - image grab bars

    Hello world I use or acquisition of vision to capture images of a GigE camera. I get images just as I trigger the camera - rates so so good. All other photos shows a few black bars. Anyone have any idea what it could be? It is not the hardware, the c

  • Aspire drivers VN7-791

    Hello I have an acer aspire laptop VN7 - 791. When I open acer care and access updates don't seem to update. But when I go to acer.com and choose drivers for VN7 - 791 G there are new drivers available. First of all, I want to know what should I down