Difference in 'auto' and 'P '?

I have several cameras from Canon. I know that the General guidelines of 'auto' and the 'P' parameter I use for the Macro setting (SX280). A parameter 'P' says '' for shooting close or far '' on the SX280 and a variety of settings on other DSLRs. I reason macros settings? and what is "near and far" setting? Auto probably adjusts the camera about light and speed on the parameter 'P '.

I'm not a maven camera, very basic point and shoot, but want to know and try new settings with my guns.

The 'P' mode is the new Auto mode so to speak. Unless you change the settings in P mode, it is similar to the automatic mode when you select everything first. If you want to try new and different settings, then P mode will allow to more flexibility so that no car not so much. For most in P mode, I shoot myself. Everything is available in Auto mode is certainly also likely available in P mode, but the reverse is not true. I have the SX50 but I bet that that it still applies to your SX280.

With respect to the development, both parameters will be automatically but when mode Macro focus distance is limited at closer distances as indicated in the manual. If you have a topic that has little detail in the middle of the image where the focus is trying to use the focus lock on an area of the topic where there is more detail in the goal to capture and concentrate on. I don't think you can move the frame of the update in your model. Focus lock is when you hold your shutter button in halfway down, then once you have the accent you want, while keeping the shutter button in halfway down, you can refocus your topic. This applies to all modes of shooting Macro not only.

Tags: Canon Camera

Similar Questions

  • Difference between "Auto off" and "Sleep" on LaserJet P1102W

    The user guide for the LaserJet P1102W indicates that the default Auto setting in the properties is 5 minutes.  "Automatic stop" drop-down list does not contain a setting of 5 minutes - rather it contains "never, 30 min and 1,2,4,8, & 24 hours."  However, the drop-down list 'Sleep' contain 5 min and other selections up to 1 hour.  What is the difference between auto-off"and"Sleep ".

    After the installation of this new printer, the default settings have been = 5 Minutes ' Sleep' and 'Auto off' = never

    I have several computers around the House than any print to the same printer.  I want to always available for printing without issue in the basement to activate it, but yet they want more economic mode.

    What is the difference between 'Sleep' and 'Auto off' and how should I put them in my terms of service desired?

    Thank you.

    Hello

    I understand that you are looking for some explanations between the Sleep and automatic shutdown of the Laserjet P1102W printer. I would be happy to offer you answers!

    For your desired operating conditions, I think that you already put as you would like. Standby essentially puts the printer in a State of very low power consumption, but the printer can be awakened from this State by sending a print job (meaning you don't have to go to the printer to remove it from that State). The auto-off function off the printer completely after a period of time. The only way to take the printer out of State would be to go to the printer and press the power button.

    To have several computers connected to this one printer I would recommend leaving the auto-off Never and Eve to what you think is the best. As I said, the printer will wake up fashion 'sleep' and accomplish what you ask without physically going to the printer.

    Hope this helps, have a nice day!

  • Difference between House and smart call home.

    To my knowledge.

    Call home - configure the SMTP server and do a few other configuration, which can allow be to send emails to the recipients you want for all gravity.

    Home - Smart call striving to reach the registry auto TAC for severity level.

    Is this correct?

    I just read the configuration guide and did not understand the importance of the priority of switching...

    Shyam,

    You're right about your understanding of the difference between CH and SCH.

    -Kenny

  • Difference between 'Reload' and "Reload (Override Cache)"?

    Https://support.mozilla.org/en-US/kb/keyboard-shortcuts-perform-firefox-tasks-quickly#w_navigation, what is the difference between 'Reload' and "Reload (Override Cache)"? What makes "ignore cache"?

    Reloading Web pages and cache bypass aims to obtain a new copy of perhaps obsolete or damaged files currently stored in the disk cache.
    You can do it like the first attempt if a normal charging does not seem to provide a version of a Web site or if you are having problems with a Web site otherwise.

    We usually have advice that if you have questions:

    Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

    • Hold down the SHIFT key and click the Reload button
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Command + shift + R' (Mac)

    Clear the cache and delete cookies only from Web sites that cause problems.
    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if an extension or theme (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problems.

  • is there a difference between 38 and 42mm with their pixel density?

    is there a difference between 38 and 42mm with their pixel density? the 38mm and 42mm watches have same interns?

    You can see the technical details of the Apple Watch here. Apple - Support - technical specifications

  • tutorial firefox differences with chrome and IE handler

    I have this code:

               var inp1 = document.createElement("input");
               inp1.type = "button";
               inp1.value = "  Delete  ";
               var bott = "boton" + i.toString();
               inp1.id = "prueba" + i;
               inp1.className = "boton";
               inp1.onclick = function() {deleteItem(event)};
    

    function deleteItem (event) {}

       var tname = event.srcElement || event.target;
       var tname1 = tname.id;
    

    ....
    ....
    ...
    Works of chrome, but not firefox

    Thanks to the fact that I was puzzled.

    Here are some sites that I think are really useful to learn JavaScript:

    (1) Mozilla Developer Network - DND

    If you are looking for something (for example, addEventListener) and add DND to your query, Google usually will give you the page to the top of your results. Or you can browse the pages of index here:

    (2) QuirksMode

    Not completely up to date, but ideal for finding information on the differences between browsers and related solutions. http://www.quirksmode.org/compatibility.html

  • What is the difference between extensions and Plugins and Add-ons?

    I'm sorry if here is not the right place for this post.

    What is the difference between extensions and Plugins and Add-ons? Apparantely, they differ in some sense or aspect, but I do not know how. Please, if it is not too complicated, explain in detail and simple language. Thanks in advance to 1 million.

    Kind regards
    Danesh

    Hi Danesh,

    You should take a look at this article for an explanation. Plugins and extensions are essentially types of Add-ons as well as of the characters and themes.

    Hope this helps!

  • What is the difference between Firefox and Namoroka 64-bit? I have a 64-bit computer. Which should I use?

    What is the difference between Firefox and Namoroka 64-bit?
    I have a 64-bit computer. Which should I use?

    The officially supported only is Firefox - which is your best choice, unless you want to test the new features...

    http://www.Mozilla.org/en-us/Firefox/new/

  • What is the difference between dawn and the beta?

    What is the difference between dawn and the beta?

    Beta is the next version of Firefox that is due to be released in 5 weeks, and Aurora is the one after that--like an Alpha version of development.

  • Difference between valuation and putting in good shape?

    What is the difference between recovery and formatting?

    I need to download tools and utilities to perform the recovery?

    Recovery recovery image installation.
    Formatting of removal of content from disk HARD integer.

    No, you don't need any download. All you need is CD/DVD recovery for your laptop model.

    To be honest, your questions are a bit funny. If you want to have accurate on such things information please publish your laptop model and it will be much easier to give you exact explanation and instructions how to use recovery CD/DVDs.

  • Qosmio X - 70A - difference between nVidia and driver Toshiba GPU

    Is there a difference between nvidia and one packed by toshiba display driver?
    I'm using the Toshiba but Geforce experience gives me a headache with warnings about a newer driver and toshiba does not appear to provide a.

    Of course there is a difference between the GPU nVidia drivers (or drivers provided by manufacturers of graphics cards) and the drivers provided by Toshiba.

    The Toshiba driver page GPU drivers are changed and made for the mobile use.
    Each laptop model supports various components (CPU, cooling, modules, etc.) and different design. That is why the heat dissipation is always different.

    The GPU driver provided by Toshiba supports a kind of GPU overheating protection and protects the graphics chip of the damage. This means that the GPU performance are controlled by the driver and in case the internal temperature would rise to critical level, it would decrease the performance of the GPU. Also the laptop stops automatically if the temperature is too high.

  • Difference between Satellite and Satellite Pro L100

    What is the difference between satellite and satellite pro? for example - satellite L100 175 and satellite pro L100 176?

    Hello

    the difference between Satellite and Satellite Pro is the operating system:
    Windows XP Home Edition for Satellite
    Windows XP Professional for Satellite Pro

    The difference between the models L100-xxx is just the equipment.
    For example the CPU:
    Sam L100-175: Core Duo T2500; 2.0 GHz
    Satellite Pro L100 176: Core Duo T2400. 1.83 GHz
    For more details look into the specifications of the models.

    Good bye

  • Is the difference between TSMC and Samsung Chip in the real Iphone 6 s? If this is the case, how can I found it before buying a new? How can I

    Is the difference between TSMC and samsung chip processors in the real Iphone 6 s? If this is the case, how can I found it before buying a new one?

    No, it isn't.

  • difference between mathscript and matlabscript

    Hi iam new to labview and learning n do labview project

    What is the difference between mathscript and matlabscript

    I want to do the simulation using matlab

    How can I do

    If one suggests this

    Please answer and provide assistance so that I will perform my project...

    With the LabVIEW MathScript node, the blue rectangular region, you
    can run scripts from files ".m" of your graph (known as LabVIEW programs
    virtual instruments or screw). You can use the MathScript node

    to insert text algorithms in a VI and then use the LabVIEW
    environment of graphical programming to instrument the scripts by adding
    buttons, sliders, buttons, graphics, and other user controls and
    indicators.

  • What is the difference between AXIEM and EMSIght? What are the benefits of AXIEM by EMSight if any?

    I wonder what are the differences between AXIEM and EMSight. Are associated with application? One is better than the other? Please explain.

    AWR estimated AXIEM most powerful plan EM Simulator around.   AXIEM is at the center of continuous research and improvement, while EMSight is only worked on if revealed serious flaws.  Here is a summary of the differences:

    Mesh

    • EMSight must mesh the nearest grid drivers using rectangles.  This causes the mesh to have more elements mesh when there are small and large geometries.  The grid should be small enough to capture the small geometry but then causes large geometries to mesh more.   In addition, angled or curved structures causes inefficiencies mesh.

    • AXIEM STS forms, rather than a grid.  In addition, the mesh can be rectangle or triangle.   This allows a much more efficient mesh.   AXIEM generally have a much more efficient

    • AXIEM contains the ability to process forms to clean geometries that cause inefficiencies of the mesh.  EMSight does not have this feature.

    • AXIEM can forms thick metal mesh, EMSight can not, and user must make approximations when thick metal will change coupling (loss is recorded properly with the thickness of the metal)

    Ports

    • The ports are for the most part similar, but parasites due on AXIEM ports are less.  In addition, the AXIEM has a side wall, thus the effects of not move of the terms of reference of the edge of the line are a lot less AXIEM in.

    • Ports can be added to most any place in geometry with AXIEM.  For EMSight, the ports are usually only added outside the geometry and have limitations to the aircraft on either side of the reference speaker.

    Problem solvers

    • EMSight does not have a low frequency Solver.  Stop low-frequency and then extrapolate to DC.  This usually works well, but you must take into account if the extrapolation is accurate.  AXIEM presents both a low and high frequency Solver so will do better in a low frequencies generally much better in DC.

    • Solver of EMSight scales O (n) ^ 2 for memory and O (n) ^ 3 for the moment.   It has a special algorithm to break the question of memory, but the question of time is the killer.  AXIEM has a direct Solver which scales in the same way and an iterative Solver which will scale O (nlogn).   In other words, AXIEM can solve a lot of bigger problems than EMSight.

    • Several AXIEM processes are multithreaded as EMSight.

    Speaker

    • EMSight is inside a perfect driver side wall.   This works well if you the circuit is in the same cavity.  If not, you must know the rules of them on to the forms of space of the flanks and how that much to extend the port could reference planes.   AXIEM is not here.   AXIEM does not currently have to simulate a perfect driver side wall.

    I don't know that I missed a few aspects of the tools.   From the point of view of the AWR that AXIEM is the tool of choice, except in a few cases have been EMSight may be required.

Maybe you are looking for

  • Replacement help Equium EA60-155?

    Without apparent reason, using 'K' of my Equium has come off. I tried a bit of gentle violin but cannot replace it. It is possible, but a pain to get the letter by pressing the key on the keyboard base. Does anyone know if it is possible for the user

  • Back panel Lenovo P780

    Hello I just bought a P780. I want to remove the rear panel to insert the sim card. I see the indentation,-j' just put my nail in and remove? I don't want to break and the instructions are in Chinese. I tried to gently taking it out, but it seems rig

  • How to allow another computer to access my wireless connection

    I'm connectedo to router Wireless 'InfostradaWifi '. Please help to allow me to set up this computer to allow access wifi by any computer nearby. A nearby computer gives the message: "cannot connect to the hidden network"InfostradaWifi". Thanks in ad

  • Usaage interupting continues computer pop-up window installer...

    The installer of Windows on several occasions of the flashese on the screen.Have you tried several programs of registry Fixer and nothing helps.In the event log:function 'ISUM' failed during the request for component "{D2D7B4BF-6CCA-11D5-8B3F-00105A9

  • Running Fixit said that my firewall is not the default suggestion on the same

    Original title: Fixit Windows account Q. How is - Fix Computer Center chooses convenience stores for my computer? A. fix it Center leans on the version of Windows you use, the hardware that you use and any other installation software to determine wha