Different ways to run?

Similar Questions

• What is the best way to run two concurrent programs using the output of either executing the other?

  I wanted to just kind of get a notice of some people here. I have two main screws the first is a data acquisition system that displays 99 different sensors and which feeds on these data in a table. The second is a real-time processing system that is designed to take the painting and do many calculations. The two output data from screw at the front that I want to see, so I don't want to use just as a Subvi.

  Is there a simple way to run two screws, using the output of the data acquisition system to power the processor so that you can easily see the signs before two screws? I had thought to simply copy the code from the processor in real-time in the DAQ VI, but I fear that the VI resulting will be very large and unsightly.

  On a side note, I'm more thinking about this? I apologize if this is a stupid question, it has been a long week... aaaand it's Wednesday.

  Look at the Architecture of producer/consumer.  It will be a good starting point, even if you find that you need to change.  When performing data acquisition and processing of tasks in parallel loops, they can both run simultaneously.  Both can feed data to the main draw of the VI.

  I'd probably use three loops with the third being the user interface only.  All that must be displayed to the user is sent to the GUI of the acquisition of data or processing loop loops and commands or entered by users are returned in these loops, probably through queues.  The wall of the VI of data acquisition and processing VI are never displayed to the user.  Especially the treatment, because it runs on a system in real-time, should avoid synchronization issues that can present a graphical interface.

  Lynn

• My theme tab in display properties is unusable. How can I change the theme in a different way?

  How can I change a theme in a different way, not not not using the properties of display/theme?
  Because this tab is just lika a image - there is nothing clickable, none of the functions to work.
  I need for you to tell me how to change the themes in a different way, even if it is very complicated, or you could tell me where I can download a file that I need to replace the old works is not a (one that works on this theme unusable tab)

  I hope for a quick response,
  Thank you

  Hello

  Remember to make changes to the computer before this problem?

  There are no other methods to set the display settings.  However, you can try to solve the problem.

  
  Follow these methods.
  Method 1:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Perform these steps.

  a. copy then paste the content below into Notepad.

  b. above, click on "file save as" change the "save as type" to "All files" and name it anything with a .reg extension.

  c. Double click on it and choose "merge" see if that brings the display options of the properties.

   

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]

  "NoActiveDesktopChanges" = hex: 00, 00, 00, 00

  "NoActiveDesktop" = DWORD: 00000000

  "NoSaveSettings" = DWORD: 00000000

  "ClassicShell" = DWORD: 00000000

  "NoThemesTab" = DWORD: 00000000

   

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]

  "NoDispAppearancePage" = DWORD: 00000000

  "NoColorChoice" = DWORD: 00000000

  "NoSizeChoice" = DWORD: 00000000

  "NoDispBackgroundPage" = DWORD: 00000000

  "NoDispScrSavPage" = DWORD: 00000000

  "NoDispCPL" = DWORD: 00000000

  "NoVisualStyleChoice" = DWORD: 00000000

  "NoDispSettingsPage" = DWORD: 00000000

  "NoDispScrSavPage" = DWORD: 00000000

  "NoVisualStyleChoice" = DWORD: 00000000

  "NoSizeChoice" = DWORD: 00000000

  'UnadviseClient ' = -.

   

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\ActiveDesktop]

  "NoChangingWallPaper" = DWORD: 00000000

   

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\ThemeManager]

  'ThemeActive' = '1 '.

   

  "DllName" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.

  74,00,25,00 5 c 00, 72, 00, 65, 00, 73, 00, 6f, 00, 75, 00, 72, 00, 63, 00, 65, 00, 73, 00, 5 c,

  00,54,00,68,00,65,00, 6 D, 00, 65, 00, 73, 00, 5 C, 00, 6 C, 6F 75, 00, 00, 00, 61, 00, 5 C, 00,------.

  6 c, 00, 75, 00, 6F, 61, 00, 00, 2nd, 00, 6 d, 00, 73, 00, 73, 00, 74, 00, 79, 00, 6 c 00 65, 00, 73,------.

  00,00,00

  Method 2:   In addition, run the SFC (System File Checker) scan and check if there is any system of file corruptions. (You need the XP disc to run this method).
  a. to do this, click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  b. type the following command and press ENTER:
  sfc/scannow
  
  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 3: If the methods above do not help, you maytry to perform a system restore.
  The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.

  For users of XP system restore.
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

• Tango Romoval: I recently contracted a malware I think... it's called Tango and I can't get rid of it I tried many different ways can someone help?

  I recently contracted a malware I think... it's called Tango and I can't get rid of it I tried many different ways can someone help?

  What antivirus do you use?

  I suggest in the installation report file to:

  https://www.Microsoft.com/security/portal/submission/submit.aspx

  And to update and run the full scan of the system.

• [ADF, JDev12.1.3] Attribute Transient VO be calculated in different ways as a var pageFlowScope: how?

  Hallo,

  I have a jspx page that contains an af:table (created from an instance of VO) and search (built-by-me) form containing a lot of search filters.

  The request of the VO should be composed dynamically based on the values of the search filters then in the managed bean that is associated with the page, I use this approach to create and run the query that fills the af: table:

      ArrayList<Object> queryParams = new ArrayList<Object>();
      StringBuilder query = new StringBuilder();
      BindingContext bctx = BindingContext.getCurrent();
      BindingContainer bindings = bctx.getCurrentBindingsEntry();
      DCIteratorBinding iteratorBind = (DCIteratorBinding) bindings.get("SearchItems1Iterator");
      ViewObject vo = iteratorBind.getViewObject();
      query.append("Select Field1, Field2, ..., FiledX from Table");
      /*
        Here I build the SQL of the query and the list of params in function of the filters, of session vars and of pageFlowScope vars
      */
      MyUtilsClass.modifyQueryDynamically((SearchItemsVOImpl) vo, query.toString());
      vo.setWhereClauseParams(queryParams.toArray());
      vo.executeQuery();
  
  
  

  In the t, I defined a transitory attribute that must be calculated in 2 different ways according to a var. pagepageFlowScope

  Calculation of transient attribute in the definition of VO by an expression Groovy does not help because 1) should be able to read the value of pagepageFlowScope var or 2) in the managed bean should I be able to change the Groovy used to calc the attribute expression.

  But I don't know if and how it is possible to do these things

  Also calculate the value in the getMyTransientAttribute() of the VORowImpl class method helped me because I should pass the pageFlowScope var to the method somehow that I don't know.

  You kindly suggest me a method to solve this problem?

  Thank you

  Federico

  You can't build the query in the way in which you want to calculate the transient attribute?

  Then, you don't need to change anything.

  Timo

• When I change the Option for the Applications of Document Adobe, Firefox always manages documents in a different way.

  I changed my Options ask me each time I want to do with a pdf document. It does not work. What happens each time I click on a PDF as an attachment in e-mail or on a Web site, is that a Windows Explorer window asks me where I want to save the file. I don't want to save it, just open. I had always presented a selection of Firefox in the past, but the box Firefox offering options for me is no longer appears. I tried to change my Options/Applications in different ways, but the practice seems so have no effect at all. I'm using Firefox 27.0.1 on a Windows 7 operating system.

  Hello, to change the options for a PDF file, go to firefox > options > applications and scroll down and set the default action for the portable document (pdf) format.

  How to disable the built-in PDF Viewer and use another Viewer

• Satellite L670-1LM - Touchpad behaves in a very different way

  Heey people!

  It's maybe a stupid question, but I don't know the answer, so I'm asking anyway.

  I recently bought a new Sattelite L670-1LM and everything works fine. Only the touchpad behaves in a very different way compared to what I'm used to.

  The two buttons, left and right, the same behavior. If I click on a random place on the screen, a quick menu appears, as if I clicked the right button of the mouse. When I noticed it, I first thought that the two buttons have been "buttons on the right."

  Then I noticed that when I actually click something, it opens as if I hit the left button of the mouse! So I seem to be able to do something with the two buttons because they have properties of both left and right mouse buttons!

  When I plug in an external mouse, quick menu opens when I click on the right button and I can open applications with the left button as I'm used to...

  Is this the usual way of a touchpad on a Toshiba laptop works or there at - it something wrong? To me, it seems as if it may be a hardware error, because it seems quite unlikely that messes things anerror, but still he messes up in a way that you can still do everything you could do with 2 different buttons. However, I have never seen this before, so I really wanted to ask the question.

  Also, anyone know how I can change this setting to a mouse "classic"? I can't fix by using the menu on the properties of the touchpad.

  Thanks in advance! Maybe it's a really stupid question, but I'm not an expert in this area.

  Thank you!
  Bottom

  OK... so now, I noticed that if I change the settings, something changes.

  If I put two buttons as buttons on the left, the two work as buttons on the left,
  If I put two buttons as buttons on the right, both work as buttons on the right, until here nothing unusual.

  However, if I put a button as the button on the right and the other as a button on the left, they both work as these buttons 'combination' I explained in my previous post... Any of them, I put as a button on the right, they always do the same thing.

• How can I manipulate a 2D led array so that the LEDs light up in different ways?

  Hello everyone. I hope someone can help me.

  I have an array of leds of dimension 2d 4 x 4. I want that the leds light up in two different ways.

  One, I want the leds light upward from left to right. In the following order:

  0.0 0.1 0.2 0.3

  1.3-2.3 3.3

  3.2 3.1 3.0

  2.0 1.0 1.2 1.1 2.2 and 2.1

  So in the end the entire table turns.

  

  The other, I want the leds light upwards from right to left. In the following order of the order:

  0.3 0.2 0.1 0.0

  1.0 2.0 3.0

  3.1 3.2 3.3 1.3-2.3

  1.1 1.2 2.1 and 2.2

  So in the end the entire table turns.

  

  Any help will be appreciated.

  
  

• A different ways of the spreadsheet file format

  Is it possible to have several methods for writing custom Spreadhseet formatting? As if I had a picture I want to have columns specific to the format in different ways. Or can you format only the entire file spreadhseet go?

  Thank you

  Konrad

  Joined a VI that does exactly what you want. It is implemented in the easiest way possible, write data to the disk a line at a time. If you have more than a few thousand lines, you want to do it more effectively. Let me know if you need this change.

  The code is in LabVIEW 2011.

• What are the different way of seeing the visitor record or profile captures information using eloqua?

  What are the different way of seeing the visitor record or profile captures information using eloqua?

  Hey Sanny,.

  There are three ways to view the visitor record or profile captures information using eloqua:

  • Contact & prospect downloads
  • submission of form data
  • cookie script & follow-up

  Thank you

• Correct way to run adoption patch cycle - EBS R12.2

  Hi all

  What is the right way to run the patch adoption cycle?

  $ . EBSapps.env < EBS_ROOT > run

  phase of adoption $ = prepare

  $ . patch EBSapps.env < EBS_ROOT >

  phase of adoption $ = apply patches = 123456

  phase of adoption $ = complete

  $ . EBSapps.env < EBS_ROOT > run

  $ Shutdown if apps run?
  

  phase of adoption $ = failover

  phase of adoption $ = cleaning

  Thank you all,

  JC

  I think these are the right steps for each phase.

  The last of them is not necessary that the synchronization will be performed the next time you run the preparation phase.

  Kind regards

  Bashar

• What is the best way to run the report of jasper in the ADF Applications?

  Mr President.

  What is the best way to run the report of jasper in the ADF Applications?

  Concerning

  Tender Hello,

  Check out these links

  Sameh Nassar: Using Jasper report in Application of ADF (detailed)

  https://www.YouTube.com/watch?v=ezX0gdLIhs0

• Best way to run a script from a script

  Hello world

  I'm looking for running a script from an After Effects script, so far, there is aftereffects.executeScript (scriptContent) who use eval to run the script. The problem is that it uses eval so it is not really sure and he is slower. So I would like to know what is actually used when we file-> Script-> Run script file.

  As seen in the Javascript tool Guide CC page 168 in the section QAnywhere Corss-DOM.

  aftereffects.executeScript(theScriptContent); // Doesn't work with a script which as comments AND the script has access to my scope
  

  In addition, if there are comments like / * * / or / * / in the script I want to run, it no longer works.

  So, what is the best way to run a script from a script?

  If you want to evaluate a whole script file, you can use $.evalFile (file, timeout) - see description in ESTK object model viewer

  To evaluate a bit of code, you can use eval, that's for sure.

  Xavier

• Ways different ways according to which two buttons that they have selected

  Basically I have a kind of ticks of interaction where I would only the user based on two out of the four buttons to move forward on the next page. However, according to the two buttons, they choose will take you in a different way. Anyway is to animate on Edge?

  Thank you in advance,

  Louise

  Yes, use variables and check them.

  Example of

  initialize your variable here

  var selected1 = 1;

  var selected2 = 1;

  On your click event to check the value of the variable, and then reset the variable for the following clicks.

  That goes on the top 2 choices

  {sym.$("Button1").bind ('click', Function ()}

  selected1 = 0;   your variable goes to 0 when the conditional checks variable from the choice of the key '2 '.

  If (selected1 == 0 & selected2 == 0) {}

  ADD YOUR CODE FOR THE EVENT CLICK HERE

  selected1 = 1;  When you click on your variable will change to 1

  }

  });

  This is true for the other 2 choices

  SYM. $("button3") .bind ('click', function() {}

  selected2 = 0;  your variable goes to 0 when the conditional checks variable from the choice of the key '2 '.

  If (selected1 == 0 & selected2 == 0) {}

  ADD YOUR CODE FOR THE EVENT CLICK HERE

  selected2 = 1;  When you click on your variable will change to 1

  }

  });

• I bought the product in the store, but have no CD drive in my computer. Download the program in a different way?

  I bought the lightroom program 6 in-store and opened the package. When I got home, I realized that I don't have a CD-ROM drive in my computer? I have my serial number. Download the program in a different way?

  Hello

  Click on the link below to download:

  Download Photoshop Lightroom