Different WiFi speed with power and battery

Similar Questions

• Tecra S2 - power and battery LED flashes - no start

  G ' Day at all.

  I have a TECRA S2 under XP SP3.
  Everything was fine until I went to a place of friends with her and plugged into the power supply and it lights up not at all and no LED.

  I removed the battery and then tried again and then happen to the power and battery LED flash together, but nothing else.

  Tried several times with the battery inside and out with the same results.
  I have stabilize power before removing or installing battery.

  Do not even have BIOS or a screen. I put the HARD drive in a caddy, and it's accessible.
  See you soon
  kb3500

  > Everything was going well until I went to a place of friends with her and plugged to the power
  Did you use the right adapter?

  To be honest, it looks like a malfunction of the power supply motherboard maybe electronic issue of power.
  the power indicator would start flashing amber if the AC adapter voltage is abnormal or failure of computer power supply.

• I want to config for different starting power and battery

  is there a way to stop certain applications running at startup only if running on battery?
  I framed and Mozilla Thunderbird running at startup but I just want this to be the case when it is plugged

  Hello KevinFrench,

  I don't know how to do this with Windows. You may need to see if there are 3rd party software available for your question.

  Thank you

• Problems Smartphones Wifi blackBerry with browser and set email account in place

  Hello

  I'm not a person very tech-savy, but now,.

  I recently got my blackberry 9780 and I'm currently NOT on a data plan. I tried using wifi on the phone, but I always get the message "Cannot connect to the server" when I open the browser or when I try to configure my email account. I disabled Moblie Network Data Services so that I don't use any data by accident.

  I use a Mac Airport Extreme Base Station 802.11n.

  * do not know if this help *.

  When I look under "service status" next to BlackBerry Internet Service: not connected & even with BlackBery Enterprise Server.

  * When I turned on the mobile, browser data works also very well... but account e-mail implemented yet "impossible to connect to the server.

  Any help would be greatly appreciated!

  Thank you!

  The BB logo would indicate that your BB is connected to BlackBerry (BIS) Internet Service. But, since you don't have a data plan, you get not BIS. In addition, the native browser can never work without a data plan. I suggest that you refer to this FAQ:

  • http://www.BlackBerryFAQ.com/index.php/What_do_I_need_a_Data_Plan_for%3F

  Good luck!

• SatelliteU300 will not start with power connected and fully charged battery

  I just bought a U300-13U. It works fine when charging the battery and AC is connected. However, if left to recharge completely it does not start with connected AC. Unpluging the power or remove the battery and running on AC make it work very well. Is a 'feature' to stop an overload or overheating of the battery, or just a problem with this machine. I want to run with AC and battery than both connected all the time like I did with all my other laptops.

  Any help appreciated.

  Hello Andy

  Of my friends has this small U300 and everything works well. I got it a few weeks ago to test the family Windows XP Setup and it works perfectly.

  Please test again very carefully and if the same thing happen again once I recommend you contact the Service partner in your country. They check your laptop. I have to be honest and say that describes the problem of strange sounds to me and please, don't wait too long. Contact the service as soon as possible.

  Bye and good luck!

• Satellite L455 - plug-and - battery LEDs power LED and it flashes orange

  I have a Satellite L455, which worked perfectly for more than six months now, but two weeks ago he began to behave strangely.

  I turned off the machine normally in the evening I was going to sleep. In the morning when I turned on it it turned on, HARD drive and on power LED blinked blue for a few seconds then they are gone. Machine does not start. I tried to turn it on again and it does the same thing. Then I saw the "power plug on" and "battery on" LED flashes orange at the same time. I unplugged the power adapter. Both lights were continuous blinking but machine will not feed. I removed the battery for a piece of 5 minutes, then reinserted it and the machine has worked all day.

  I went he deleted off the power plug and the morning again it wouldn't start until the when I removed the battery for a few minutes then it works again. The battery recharges very well that when I remove and reinsert it even without connecting the power cable still lights up and works perfectly.

  Then, I removed the battery and the power supply Plug and you press the power button for 30 seconds to unload the machine and then return power and battery and it worked until I turned off again and shutting off the power and then it didn't once again.

  If I stop just of machine and do not turn off the power cord, then I can turn it back on to and work with the machine without hassle even for three days without interruption.

  What could be wrong? Any help will be really appreciated.

  Concerning
  Yusuf

  Hi chidzungo,

  It must certainly be a hardware malfunction but he s strange why it pops up every day after you have closed the laptop. Do you use batteries and AC/DC to original Toshiba adapter? Have you connected external devices to your laptop? If so delete them before you turn on your laptop.

  What version of BIOS is installed at the moment? You should look on the Web from Toshiba website for an update. Update of the BIOS might also help and it s worth a try.

  Before you start reading the BIOS BIOS update instructions update [HERE: http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=60]

  Satellite L455 seems to be an American model, so the BIOS update can be downloaded from the Toshiba U.S. page but first check the exact part number:
  http://www.CSD.Toshiba.com/

• Activation of Windows 7 with bootcamp and virtualbox problem

  How to correctly activate my Windows 7 Professional works on two different configurations. With Bootcamp and Virtual Box? This used to work great until an update does not allow me more. I have it setup where I can boot into parrel with my mac or by itself with bootcamp.

  Any ideas? Thank you

  You must have separate licenses for two instances of Windows 7 Professional. Both facilities are considered to be different computers. The VM (VirtualBox) and BootCamp are regarded as separate computers.

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

• Want to m6-k022dx: HP Envy seeing m6-k022dx of power and wifi lights NOTHING works

  I have a HP Envy m6-k022dx-p/n E0L06UA #ABA s/n [personal information deleted]

  When I load up and press the power button:

  The power led lights up, the wireless light is orange

  And nothing else works spin - Fan of no. - No. HD - white screen.

  Num Lock and caps do not light upward.

  I removed the back and didn't see all the connectors loose, I unplugged the battery, removed the RAM and even wifi card.

  Put the battery connector back on and same thing.

  (FWIIW: it is a laptop with an internal battery)

  This would cause bad fan?

  (If not, my swag is - the motherboard is toast)

  Hello @W8WCA,

  Thanks for the quick response!

  You can contact the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

  Kind regards!

• Equium L10: Problem with the main battery and battery RTC

  Hello

  I have the Toshiba Equium L10 and it is about 14 months old and I have problems with the battery and how much time it takes after a full charge. I also have problems with the RTC battery and an ERROR 0271: check date and time settings message when I turn on the laptop.

  Regarding the battery, I can fully charge it upward in about 3 hours, but when I start to use it, apparently in the last few hours around one and a half or so and then it needs to be recharged. I can have down for about 40 minutes and then turn it off and come back later or in a day or two. How long should I expect from a fully charged battery?

  About the batttery RTC, it really becomes a pain and I only started to get the message of the ERROR 0271 start-up, in recent weeks. I can charge the battery pack and then leave for a few days, but when I turn it on, I get the message ERROR 0271 on the date and time incorrect. Surely after a full charge, the RTC battery should last longer than a few days?

  The manual says that if the RTC battery is exhausted or becomes weak, you must charge the battery of the CCF for 24 hours, in a different part of this manual indicates between 24 and 48 hours, but how can load you for long when the sections concerning the charging battery pack status after charging the battery you unplug the power adapter because leaving connected will shorten the life expectancy of the Battery Pack. So, how we can charge the battery of the CCF for 24 to 48 hours if we shouldn't leave the AC adapter plugged in once the battery is charged - which is nearly three hours. Suggestions about these problems would be appreciated.

  Besides we all know that it is easy to change the CMOS/RTC battery in your desktop base unit, but is it easy to change in a Toshiba Equium L10?

  Concerning

  Brave0

  Hi Brave0,

  The normal recommendation for the CMOS (RTC) battery is to leave the laptop connected to the power supply at least 12 hours when the main battery is fully charged. The charging circuit is going to hijack the current to the load automatically RTC battery and no current will be forwarded to your main battery.

  Recommendation do not leave the power adapter is plugged in the main battery is fully charged is really only applicable to older laptops that used no batteries Li - ion and therefore they had to be completely discharged before recharging to avoid any effect 'memory' of the battery.

  With modern Li-ion batteries, it is quite safe to leave the battery when fully charged and still power the laptop from the AC adapter. The charging circuit will pass all the battery charge if it is fully charged.

  Kind regards

• Satellite L755 - suddenly then turn off blinking of power and the battery LEDs

  In recent weeks, when using the laptop (Satellite L755 psk2ye) he died suddenly and the power and the battery leds start flashing simultaneously.

  It also takes place when charging the battery when the unit is off... then l must cut off the power and he'll be back... Although the problem sometimes occurs again after a few minutes hours or does not...

  Remove the battery and check if the same problem occur when you use laptops with power running.

  Please post comments.

• Power supply and battery...

  I've often used my laptop with power supply and the battery plugged in at the same time... Is this correct?... I confused the battery after charging or leave it in my laptop to go... I want to protect my battery so please tell me the right

  Dear med87,

  Welcome to Lenovo Community

  Under the program of the energy that should come with the computer as a pre-installed program management, you must press (settings battery) then under the battery you should have called the battery Protection Mode, select it and press OK.

  This Mode charger the battery Up to 60% and stops charging the battery, then it take its power from the charger, it's the best thing you can do to protect your battery.

  Please try the computer, if you have had other problems, let me know.

• BlackBerry BB Q10 Q10 - difference between Power OFF and "battery pull out?"

  Hello

  Anyone has any info on what difference the phone sees between a switching OFF power and make a battery out?

  Apparently, some of the guys to BlackBerry customer service advise you to do a battery pull off when the phone is in MODE.

  Just curious to know what is the reason behind it.

  When you turn off your phone, keep everything intact until you turn on again. When you do a battery pull, he interrupts the operation of the phone and many temporary files, not necessary for the proper functioning of the phone, are deleted. In many cases, when there is something playing havoc on your phone it is found within these temporary files.

  Another method to do a battery pull should press and hold the power button until the BlackBerry is displayed on the screen. Other things will appear before that but if you continue to hold until it shows, the effect is similar to a battery with the phone powered pull. Note that pressing the power button to turn off the phone does not erase these temporary files unless you press and hold until the BlackBerry presents, usually about 15 seconds.

  I hope that helps you.

• E530 can't help with windows 7, battery and unable to get out of sleep

  I just bought the above and I find that it does not completely stop with the Windows shut down and if the power cable is removed, the battery drains eventually and it is flat.

  Also if the lid is closed and laptop computer goes into sleep mode, and left with the lid closed for a few hours (with power connected), on opening the lid, I can't get PC to come out of sleep mode and must finally make a 5 seconds press hard stop.

  The laptop is as it came, standard, with any other connected device. He runs a processor Intel I5 - 2520M.

  He reports any errors.

  concerning

  W

  I think it is best that seek you assistance of the warranty on it, call 131 426 option 1, then 2.

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

  Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

  Yes and no.