Difficulty disconnecting

I tried to connect to a printer-FAX in using a USB port on my docking station. I had to download the printer driver specific to the web site of the hotel and in the end, was not able to get printing to work. I unplugged the device and then tried to remove my computer. He won't let me untie him and I get a message that says "you cannot eject your computer because one of the devices listed in the docking station, 'printer port logical Interface', cannot be stopped because a program is accessed again. I tried to restart my computer, but still this message. I'm completely disconnected the cable from the printer, but some programs always intervenes with my equipment. Can someone help me to 'Cancel' what has caused this, so I can disconnect. Thank you very much

Although I'm not inclined technologically, I answered my own question - actually went to my printers, clicked on the printer in question and canceled a current print job. Then remove the printer from my cock. Detached from the computer. I don't like this format of forum however and this will save to my FAS Office

Tags: ThinkPad Notebooks

Similar Questions

  • Watch frequently is disconnected

    Since the upgrade to iOS 10 (iPhone 6) and watch OS 3 (first generation shows) my watch is constantly becoming disconnected from the phone. This is a quick fix (I just turn off and turn on the Bluetooth on the phone and it is fixed). But it's boring. I go through it a dozen times a day. And it never happened for the whole year I had the watch until I upgraded. Patches? Thoughts? Suggestions? I have not matched the watch and re-paired, but it is still frequently disconnect.

    Hi there, dturkelson!

    Thank you for reaching out by Apple Support communities. From your post, I understand that since the update to iOS 10 on your iPhone 6 and watch OS 3 on your Apple Watch, you had some difficulties to keep connected. I know how it is important for the two devices to work together and want to make sure they stay connected!

    I see that you have tried to disable the pairing and repair the iPhone and Apple Watch, but the problem persists. It was a big step to try! Since it did not help, I have a few other things I can say to you.

    First, if you haven't already done so, restart the iPhone matched following the steps described here: restart your iPad, iPhone or iPod touch

    After rebooting the iPhone, test how well your Apple Watch remains connected.

    If you're still having problems with connectivity, désapparier your Apple Watch from your iPhone by following the steps detailed here: pairing your Apple Watch and iPhone

    Reset the network settings on your iPhone under settings > general > reset > reset network settings. This will remove not your personal information (contacts, photos, calendar of events, etc.), but it will remove networks WiFi recorded and passwords, as well as all the APN or previously used VPN settings and Bluetooth devices connected.

    After the reset, pair your Apple Watch with your iPhone again and test the connectivity.

    Finally, if the iPhone and Apple Watch still have difficulty to stay connected, back up your iPhone and then restore it to the factory settings. Instructions to save can be found here: How to back up your iPad, iPhone or iPod touch

    And instructions to restore can be found here: using iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

    Once the restore is complete, set up your iPhone as a new device (i.e. without using your backup, at least temporarily). You can connect to iCloud iMessage, FaceTime and iTunes and the App Store. Pair your Apple Watch, then test connectivity. If everything works as expected, go ahead and restore your backup following the steps are: restore your iPhone, iPad or iPod touch from a backup

    Have a great day!

  • Win 7 USB connection problem disconnect/connect Cycl

    Is anyone else having problems with their Droid Turbo and a Win7 PC connection? I got my first camera at the end of November. When I initially plugged on my PC, the AutoPlay of Windows kept popping up window and the device would be cycle as if it had been disconnected. The AutoPlay window closes never alone, and I need to close from a few to several 10s of windows (based on how long I left it plugged in).

    I was able to get a stable connection after installing the Motorola Device Manager software.

    After a problem without report, Verizon has replaced the original phone with a new phone. The new phone is the same cycle of disconnection/reconnection anytime it is plugged. Software Motorola device Managger says that the software is up to date.

    I connected the phone to a Linux computer and had no problem copying files back. The connection is remained established until I got the USB cable.

    I rebooted the phone and the PC several times that I care to count.

    Also has anyone seen this problem? More importanly, does anyone have a solution?

    My phone (in MTP mode, without debugging) shows that the VIDID 22 b 8: 2ea4. On several occasions, I saw the PID also be 2ea5 and 2ea8. (Maybe it's with debugging on, perhaps a PTP mode).

    A few times, the device is presented as "Unknown device" with no details in the Device Manager.

    I plugged the phone in each USB port on the computer.

    If I knew that the files to remove from Windows to replace the driver I'd do it. If I knew that the right driver I tell Windows to use. So far I have not found one that works.

    Thank you

    James

    James best would be to connect the device in MTP, USB OFF debug mode. In Device Manager, locate the device and click on uninstall. At the prompt to uninstall to make sure that you CHECK DELETE the driver software. Uninstall device of motorcycle, bike mobility Manager drivers and nothing of another "bike Mobility" brand. I use a disc cleaner (ccleaner) delete left over remnants of uninstalled product files. I first do a system cache/clean and repeat several times until the cache gets up, nothing to remove. After that it's over, I run the registry cleaner. After scanning, select "Questions of difficulty" to the quick click reg backup YES, choose a SAFE place 'FIX ALL '. Once done, repeat until there are no more problems found. After all this is finished, STOP, do not restart. Computer to start up, run CCleaner again just to make sure everything is clean, so before you plug in your phone, go to and install Motorola Device Manager/USB Drivers. Let the full install and reboot. In developer options, revoke the authorization of debugging. Connect the phone in MTP mode to the PC and let Win7 to install the drivers. Change the connection of the device to PTP repeat, then finally change device USB debugging and let windows install the drivers. Let us know if this helped or hurt.

  • MS fix Ctr error 'invalid command line argument' & ' code: 0 x 80070002 "&" context: Elevated ' for ' diagnose & difficulty of the problems of security of Windows '&' diagnose & repair problems Windows folder & "programs.

    I downloaded MS difficulty It Center yesterday and ran 'Improve performance and security in Internet Explorer' and it worked very well. I am running Windows XP Home Edition w / Svc Pack 3, if this information is not displayed.

    Hi rcserve,

    1. did you of recent changes on the computer?

    2. do you have security software installed on the computer?

    I suggest that you manually download Fixit instrument and save the Fixit file on the computer and later do a right click on it and click run as administrator and check if it installs on the computer.

    Open the Web tool Fixit page and click Advanced-download to run on a computer disconnected, or different when you get the prompt to save on the portable device, select desktop as the location to save it.

  • I can't disconnect or change user account after update vista Home premium SP2

    Acer e380 with vista home premium 32 bit OS 3 G of Ram
    After the SP2 update successful that I don't then log off user accounts or to switch between user accounts

    When I choose logout of the system never disconnects, and I have to hard start
    When I chose to change username the same thing happen it never disconnects and I have to hard start

    I can access my different user accounts when restarting individually well but is not a viable solution as long as switching user accounts and logout worked just find before the SP2 update

    Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. Chances are that the "remains" of Norton here is your troublemaker.

    Roll up your sleeves & cross your fingers...

    ACTIONS

    [You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all the steps in a 1 uninterrupted session!  [If a step said to restart, restart! ]

    1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3 uninstall Norton Security Suite [or keep constant Protection Suite if you are a Subscriber Xfinity] and LiveUpdate and start any Norton Add ons via | Control Panel | Programs: Programs and features.

    4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  [Should be automatic, but I want you to check again.]

    NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #8 below!

    5. right click on the file that you saved in #1 above and select run as administrator to run the utility, and then reboot again.

    6. OPTION A: do a clean install of Norton Security Suite [or keep constant Protection Suite]; Follow all the instructions.

    NOTE: Do not activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.

    OPTION (highly recommended) B: Install Microsoft Security Essentials (also free but MUCH more reliable & less annoying).

    -Online do NOT install applications as well !<>

    7. If you take OPTION A to #6, manually & repeatedly run LiveUpdate (Norton) until you get a "not more than updated" or similar prompt.  Otherwise, skip this step.

    8. right click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

    Note: Good for IE9 & IE7, too.

    8B. do a right-click on the file downloaded in # 8 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop named ie8-rereg.

    8. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 8 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

    9. reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

    10. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [3]

    10. b double-click the file that you saved in # 10 above & accept invites him to MERGE with the registry data.

    11 restart again.

    12. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

    Note => for best results, check the option Remove personal settings .

    13. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

    13 b. IMPORTANT!-online make disappear/close the pop-up window that offers the Windows Update troubleshooting tool! -then...

    c. 13, without taking into account of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [4]

    14 restart once more and then run a manual updates & install any/all the updates available (for example, KB2722913 or higher); Follow all the instructions.

    15. open Internet Explorer (only!) to http://java.com/en/download/installed.jsp & make sure that the test shows that Java Version 7 Update 7 [for Internet Explorer] is installed.

    16 get Adobe Flash Player v11.4.402.278 (or higher) installed NOW! Follow the instructions here-online http://aumha.net/viewtopic.php?f=26&t=46252

    17. While you're at it, make sure that Adobe Reader or Acrobat v10.1.4 is installed (assuming that one is your default PDF reader)-online http://aumha.net/viewtopic.php?f=26&t=46241

    18. in response to this post with a status report.

    Good luck!

    =========================================================
    [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

    [2] after that we ended up this thread, do not hesitate to reaffirm Chrome as a default if you wish.

    [3] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

    [4] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  • Why my files and folders on the desktop goes away when I stop or disconnect my computer?

    Why my files and folders on the desktop goes away when I stop or disconnect my computer?

    When I start my computer its message of shows like temporary file is retained and watch the preparing your desktop... can anyone find the answer?

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Read this: http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    See you soon.

    Mick Murphy - Microsoft partner

  • Internet me disconnected, now asks me to set up a network location.

    I was doing some games online about 3 there are nights where I'm disconnected from the internet (not unusual while making online games). However, after restarting my modem to get online a window pops up asking me to choose a network (home, work, Public) location. I've never had this happen before. Usually my internet just works, as soon as I restart it. I am usually connected to "Network 2" and he never asks me on the establishment of a network location. Now, it connects to the "3 network" and forces me to choose a network location each time I restart my modem. In addition, my light on my modem downstream is now orange instead of green, and my internet is running more slowly than normal. I called my service provider and they were absolutely no help. Basically they said that since I was online, everything is fine and not to worry about the light orange and the network window. I'm just worried that I'm connected to a random network of computers or something. My OS is Vista x 64. Any help would be greatly appreciated. Thank you

    Hello

    In the router/MODEM orange light indicates that the there is a difficulty to transfer packets in the network. It might as well be the reason why you are faced with slow speeds. Try to reset the router/MODEM and see if that helps.

    What type of internet connection do you use?

    Try to reload the drivers of wireless network card.

    Uninstall and reinstall the network adapter drivers. Follow the steps mentioned below to do so.

    Click Start > right click on computer > Manage > Device Manager > Expand network adapter > right click on the wireless adapter option > click on uninstall > now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

    Let us know if that helps.

    Concerning
    Anthony.

  • Keep getring msg "windows detectd a serious threat to your safety... found 159 threats"__win32/netsky...soap/hoax spyware...win32/bagle.he worm (158). " How I have difficulty or eliminate these threats? __

    Message keeps popping up "windows has detected a serious threat to your safety... detected 159 threats ' WIN32/netsky. Q worm (18)... SOAP/hoax Spyware (23)... Worm Win32/Bagle.He (158). How difficulty and/or eliminate these threats? When appears the msg I must disconnect to temporairly remove it. In addition unrequested porn pictures are automatclly arise and also a warning... «the catalyst control center is not supported by the version of the driver for your graphics enable...» »

    Your computer is infected by a rogue security program that claims to find threats to the security and trying to make you pay for the program.  Don't do it! Click on the Red 'X' in the top of the window title bar to close the window, or press Alt + F4 on the keyboard.

    If you want to try to remove it yourself, first run a full scan with your antivirus program.  Next, download and run these programs:

    Microsoft Windows malicious software removal tool
       Malwarebytes' Anti-Malware

    For more detailed help that you can go on the malware removal forum to Aumha , see spyware and malware at BleepingComputer.com removal guide.  Or get help from a reputable local computer consultant.

  • How can I disable my driver to disconnect me from the internet?

    HP G72 laptop product # XN517UA #ABA

    Windows 7 64 bit

    no error but the difficulty to keep the internet connection. I have T-mobile web connector and went wrong w/t-mobile, and they claimed that my driver is disconnect the internet connection.

    I made no changes to my laptop and all udaptes are up to date.

    deeR504 wrote:

    When I use a LAN connection I don't waste connection. It is only when I use my web connector that I lose the connection online. I just need to know if it's my web connector or the drivers. As I've mentioned before that I called T-monbile and they say this isn't the web connector because it has no problem connecting to the internet, it's the fact that he cannot keep a bc driver connection disables the web connector.

    I have the T-mobile 4 g rocket

    I have Windows 7 Home Premium version 6.1 (64-bit)

    If there is no connectivity problem with the connection to the local network, then the problem is most likely to be the firmware / software driver and/or web interface provided by T-Mobile with their dongle.

    Have you been to the T-Mobile forums to see if others are having problems?

    I found that other people know the firmware problems and connectivity. You are not alone. If your normal edge wireless works very well and the local network connection (wired) has no problems T-Mobile dongle is the problem. The dongle come with a warranty.

  • My Sidewinder X 4 guard disconnect frequently

    Separated from this thread.

    Usually my Sidewinder X 4 works perfectly. All keys of Macro/Media work. I use the mouse and keyboard Center 2.0, which works very well too. However, any time I hit caps lock SHIFT NUMLOCK or scroll, the backlight vanishes, keyboard disconnects for about five seconds and then reconnect. None of the lights (for caps/num/scr) are on, ever, even when one of these things is locked.

    I can look at the device disappear in Device Manager when I press one of these three keys and then reappear. I can also open Center of keyboard and mouse and watch it tell me I have no device connected for a few seconds, and then it reappears as if by magic.
    Another oddity, I noticed, is that when I start, I can open the keyboard to the screen without problem, but then after the first time I press one of these three evil keys, on-screen Keyboard won't work again until I restart. This leads me to believe there are a few conflict mapping somewhere (registry, perhaps?) but I'd like to hear from someone else who has had this strange question and maybe understand an easier difficulty before I'll go in there.
    Oh, and it comes to Windows 7 64 bit.

    Hello heraud,.

    Thanks for posting your question on the Forums of community of Microsoft.

    Are also facing the same issue?

    I would like to try the following suggestions and check if the problem persists.

    Method 1:

    Run following hardware and troubleshooting devices and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    If the problem persists, try the following method.

    Method 2:

    Download and install the latest Microsoft, the center of the keyboard and the IntelliType software from the following link.

    http://www.Microsoft.com/hardware/en-CA/d/SideWinder-X4-keyboard

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  • Network drives disconnect randomly on PC in Win7

    My home network consists of a router and 2 file servers with 2 external drives attached to each server.
    I have 3 PC connected to the network. Run two computer laptop XP and the third PC is a desktop computer
    running Win7.
    The XP PCs do not have this problem, only the Win7 PC.

    I applied to the difficulty of Microsoft PC Win7 it 50494.

    That he correct text States 3 items to:

    (1) I checked the registry value - \lanmanserver\parameters autodisconnect is value ffffffff.
    (2) the registry value - \lanmanworkstation\parameters value: KeepConn does not exist.  I'm not
    of course what I'd do in this regard?
    (3) I used the command net config server /autodisconnect:number to disable the automatic disconnection by setting the
    Number-1.

    Do I need help to make sure that I applied the adapt 50494 correctly and if so, why the problem still happened?

    I saw the method 1 to verify that the patch has been applied to it.  This is with the exception of
    value: KeepConn in \lanmanworkstation\parameters.  It does not exist in the
    record on the Win7 PC or exists - it in the registry on the XP PC 2.

    What should I do about it?

    I examined the method 2 and that the Working Group on the Win7 PC not found
    the name correctly.  I fixed it so now all 3 PC's have the same
    working group name (MSHOME).

    Your help is appreciated.

  • Several BSOD and wifi disconnects

    I own an acer aspire E1 - 570

    Specifications:-Intel i3-3217U(1.8Ghz, 3MB L3 cache)

    4 GB of ram DDR3, 500 GB HDD. Graphics Intel hd 4000. Windows 8

    It is almost 2 years old laptop everything worked and the laptop is not repaired as a result of any problem. 2 portable weeks ago freezes a bit and the wireless adapter has disappeared suddenly. I used windows 8.1 right here

    Since that day I am faced several BSOD with different errors for example whea of incorrigible error, memory management to name a few, because I remember not all of them like every day, I see a new BSOD about 2 - 3 times a day. I tried all the simple, suggestion, troubleshooting advice literally all update the driver to install a copy of glass clean but wireless problem is unresolved and BSOD comes again.

    After all that I did including my laptop and my laptop fan, the ram and the wireless card, that the problem got

    resolved for a day, but again once she returned.

    The current scenario is that now wifi disappears it shows connected but frequently shows limited conmection and is practically unusable because every minute I disconnect and reconnect to use it. And this morning, it worked well or a time and again started to do the same things. Sometimes it doesn't find any network and say no networks detected and reconnects automatically after a certain time.

    Also today new problem appeared. It freezes and is a hum coming from the speaker for a minute and it starts to work again and he has also restarted once during this freeze moments.

    Problems remain in windows 8 and windows 8.1.

    Convenience store usually shows problem with wireless adapter or acess point and connect it again, but the next minute the same thing repeats, with limted connection wireless network.

    Please if someone can help out me. Thanks in advance.

    Hi Aditya,

    Thank you for the update.

    You should not have to reinstall Windows. However, if SFC displays corrupted files and failed to remedy, I suggest you run the DISM tool and check.
    Refer to this article:
    Difficulty of Windows Update errors by using the DISM tool / System Update Readiness
    https://support.Microsoft.com/en-us/KB/947821

    It allows to correct certain errors of corruption of Windows.

    Please keep us informed.

    Thank you

  • Difficulty of your CC APP

    Ago countless complaints on this forum and other about the application Adobe CC do not stay connected, disconnected randomly and does not have a basic option so he can retain the sign so contemptuous of the credentials is engineers CC's of customers who use this software. If Adobe wants to run a basic service subscription, then fine, but your subscription system has to work and he has to work without fail at any time.

    When enforcement CC sign fonts and other resources become instantly unavailable making the whole tedious process of signature to new necessary. Again, this shows that nothing else that contempt for the users of this product. is there an option "make resources" available offline then I'm not aware but such an obvious addition is once again an illustration of a little more than contempt.

    For the record, the difficulty of removing database does not work, the fix of laughable network configuration settings is an obvious joke and will be ignored, is not our router, it is not our Lan cables or our internet connection, the speed of the drive or card GFX, memory, other applications, or a proxy server or goblins green in the case of the computer. This is your Adobe application and no amount of chatting on the phone with the 'technical support' chart with names very obviously made-up people will remedy.

    Skype remains connected, Steam remains connected, all applications in the wide world of computers have deciphered the trick to "stay connected". I would like an answer to a true Adobe engineer to explain this prank if you have the courage and conviction to stand behind your work and say that the CC app is a good piece of software.

    This is the user to user forums.  While they sometimes receive attention from a few employees from Adobe, your request for a response to a specific type of individual is unlikely.  If you want answers directly from Adobe, then you should focus your attention on them rather than on these forums.  Your approach to questioning a person to respond the way you have (negatively) is more likely to win only the usual answer "we are sorry to hear... "as a constructive discussion.

    To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

    Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

    Creative cloud support (all creative cloud customer service problems)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

  • Ethernet, says "cable disconnected".

    Ethernet, says "cable disconnected" I looked at a few posts... but they are old messages and say, update to 3.28.2, mine is Articles 3.30.1

    Referring you to update to 3.28.2? Where do you get this error message? Your iMac still running OS X Lion mountain 10.8.1? What exact model is your iMac?

  • iPhone disconnect WiFi in case of sleep

    My iPhone warning disconnect the wifi when sleep but will automatically reconnect after a few seconds, when I turn it back on. I don't know what happened, but it just started a few days ago.

    If it's important, I'm in iOS beta and race 10.1

    Hey pontais,

    Thanks for you using Apple support communities. I can see from your post that you are having problems with a Wi - Fi disconnection when your iPhone 6 is not in use while running iOS 10 beta. The public version of iOS 10 was released with the latest version being 10.0.2. To isolate and help solve this problem, we want to go forward and you updated to the release version with the procedure described in this link below:

    Any software beta iOS

    Download the final version of iOS

    If you have a beta version of iOS and you want to download the final version, follow these steps:

    1. Connect your device to iTunes.
    2. When your device is connected, force it to restart. Press and hold buttons sleep/wake and Home at the same time. Don't release when you see the Apple logo. Keep now until you see the Recovery Mode screen.
    3. When asked, choose updates to download and install the latest version of iOS nonbeta.
      An update installation does not affect your settings or content.

    Once you have downloaded the final version, monitor your Wi - Fi again and let us know if you experience the same problem.

    See you soon.

Maybe you are looking for