Difficulty EntryPointnotFound - Rtk BtMnt.exe... SetupDiEnumDevicInterfaces... SS the fix for a such knETUPAPI.DLL of patheow.

Similar Questions

• Does anyone have or know far to obtain the fix for MS Picture it 2002 (kbid 316861)

  -Anyone have it or know the far to obtain the fix for MS Picture it 2002.   (kbid 316861)   MS sites isn't him. Thank you

  Original title: need kbid 316861

  Hi Timothy,

  Thanks for the post. I understand that you need the patch for MS Picture it 2002.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. what operating system is installed on your computer?

  You can check the link for more information below:

  What version of the operating system Windows am I running? :

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  2 is that you have problems with MS Picture it 2002?

  You can check the link for more information below:

  Picture It! :

  http://support.Microsoft.com/GP/PIC

  3. you receive an error code or message?

  4. have you made any recent hardware or exchange of software on your computer before the show?

  I suggest you to follow the steps in the KB316861 from the link below.

  It is originally in French, but there is an option to translate the page with the help of Microsoft Translator and check the issue:

  PIP2002 error at the beginning of the program:

  http://www.microsofttranslator.com/BV.aspx?ref=SERP&BR=ro&mkt=en-us&DL=en&LP=FR_EN&a=http://support.Microsoft.com/kb/316861/FR

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• I need the fix for win Xp Sp2 can install the HD Audio Device codec

  I need the fix for win Xp Sp2 can install the HD Audio Device codec!

  I has this fix and I lost it...

  It is contains (patch 3)

  can u please help me and give me the link of this hotfix

  Could be the fix. Looks like he helped other people with the same device.

  http://support.Microsoft.com/kb/888111

  If this isn't the case, I can continue to dig.

• I have windows xp. The fix for microsoft data center could not scan my computer because it says that an error has occurred

  I just installed the fix for microsoft data center and I couldn't run a check on the various problems because they said and the error has occurred.

  Hi Carroll,

  If the problem is just related to the execution of the Microsoft Fixit tool, I suggest that you post your question on the Forums of Microsoft Fixit.

  Microsoft Fix it Center Forums

• I am trying to install a program and I get entry point getdlldirectoryw could not be found in the library of links Dynamics kernel32.dll file and the same for shreggetvaluesw to shlwapi.dll

  I am trying to install a program and I get entry point getdlldirectoryw could not be found in the library of links Dynamics kernel32.dll file and the same for shreggetvaluesw in shlwapi.dll. How can I fix the problem.

  You have all your current updates?
  Go to windows updates and see if there are updates that you do not have installed.
  The error message seems to indicate that your copy of XP has not been updated.

  Updated and let us know if you still receive the error message.

  Thank you

  Marilyn

• Automation error: The object invoked has disconnected from its clients when the exe to exectuted the VB6 for the second time

  Dear all,

  I had this really common automation error when I run an exe file created by Visual Basic 6 for the second time. Whenever I ran the program for the first time that it works really well. But the second time always fails. When I ran in debug mode in Visual Basic 6, sometimes it worked. I checked the code and found it would be discontinued in the next part - CommonDialog1.ShowSave.

  ReDim SelectedVar (1 NumSeleVar)
  ReDim SelectedVarTxt (1 NumSeleVar)
  I have = 1
  For j = 1 To NumVar_GasPlants
  If chkOpt (j - 1). Value then
  SelectedVar (i) = j
  SelectedVarTxt (i) is chkOpt (j - 1). Legend
  i = i + 1
  End If
  Next J

  'Get the name of the export file.
  If not g_RunOutputMacro then ' check-out
  CommonDialog1.cancelError = True
  CommonDialog1.InitDir = curCasePath
  If IsMonteCarlo then
  CommonDialog1.FileName = "HourlyData_GasPlants_" & cmbYear.Text & "_" & cmbMonteCarlo.Text & ".csv".
  On the other
  CommonDialog1.FileName = "HourlyData_GasPlants_" & cmbYear.Text & ".csv".
  End If
  CommonDialog1.Filter = ' (*.csv) | * .csv.
  CommonDialog1.FilterIndex = 1
          CommonDialog1.ShowSave
  SelectedOutputFile = CommonDialog1.FileName
  On the other
  SelectedOutputFile = g_Output_FileName
  End If

  I have been tormented by this problem for almost a month. Any suggestions or ideas would be very appreciated!

  Thanks a lot guys!

  Hello

  This problem would be treated better in the MSDN Visual Basic forums. Expertise it can help you with this problem.

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral

  Thank you

  Stephanie Podder

• try to download the fix for kb967102

  I am running Vista Ultimate 32-bit on an Intel Core2Duo E6850 3.0 GHz. I have known the exact error mentioned in KB967102, which was also detected. The link to the fix choice explains the details, but the only options available for me to download are 64-bit versions. I think I need the 32-bit version.

  The email that I received for the link is:

  The KB Article number: 967102

  Language: All (Global)

  Platform: x 64

  Location: (http://hotfixv4.microsoft.com/Windows%20Vista/sp3/Fix291684/6000/free/395075_intl_x64_zip.exe)

  This is a file protected by password, I need the password as well.

  Hi wa1dar,

  This hotfix is applicable for the 64 bit version of the operating system.
  We would be happy to help you with the problem you are facing on the computer.
  Please provide us with more information about the issue that you are facing.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where the fix for ics

  I was wondering where the fix is for Ics battery problem? I'm on my fourth replacement and it is not the phone. Can someone give a guess on what help is coming?

  
  

• error code 40 trying to download the fix for kb967102

  try to download fix for error stop on ie 8 when the awakening of the mode standby. fix error during the download are usually 40 decompress all files .please help I'm going crazy

  I think I found a solution, when the window opens and asks you where to put the file c: / / is in the default is just replace your desktop it should unzip there without a problem. Good luck

• LV 2011 development environment and prompt to install the fix for LV 2012 RT Module f1?

  I have a LV 2011 development environment configuration, including RT I get a message that there is an urgent fix for RT 2012 LV available; See attachment.  This machine of development must remain the LV 2011; This patch must be installed?  Thank you.

  Matt

  As stated in the notification message, you see this update because you probably have another component which released LabVIEW RT 2012 - NOR-RIO 12.0, WSN 1.4 or Fieldpoint 6.0.11.  It was to fix a specific problem in 2012 of LabVIEW, which hit the RT, so if you haven't installed LabVIEW 2012 then the patch will be neither harmful nor helpful to you; However, files of Framework Setup OR RIO, WSN and Fieldpoint for RT should be updated to be compatible with changes in LabVIEW (and so you probably installed component that has an update is available, even if 2012 LabVIEW itself is not installed).

  -Danny

• Anyone know the link for the fix for API 32 to 64

  I thank Tom Sc for its answer, but I hate the idea that microsoft would let Vista users in the dark, because it is old I have a windows 2000 system that gets also updates and window SP.

  There is a link to a fix for this problem someone out there knows it

  Hello

  I suggest you try the procedure described in the article and see if it helps.

  You experience problems when you try to print a document in a 32-bit program on a computer that is running a 64 bit version of Windows Vista

  http://support.Microsoft.com/kb/941962/en-us

  For more information, you can try this search engine Bing.
  http://www.Bing.com/search?q=%22APIS+32+to+64%22+Vista++site%3Aanswers.Microsoft.com&QS=n&Form=QBRE&PQ=%22apis+32+to+64%22+Vista+site%3Aanswers.Microsoft.com&SC=0-0&SP=-1&SK=
   
  Hope this information is useful.

• How to integrate the fix for xp mode?

  Try to use the mode of windows xp with Windows 7 pro sp1. Found that my processor AMD 8 was not compatible. Then I found the 2519949 of the article with a link to the fix. Downloaded and it self extracted. Has not fixed the problem. The article received instructions (install the OPK (OPK) Windows 7 SDK).

  Is there another way to make this fix work? Maybe a simple and easy way?

  Hi muddy78bronco,

  Follow the steps in the link:

  http://Windows.Microsoft.com/is-is/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

  http://www.howtogeek.com/HOWTO/10911/run-XP-mode-on-Windows-7-machines-without-hardware-virtualization/

• What is the fix for Windows XP Mode do not install on a system with a bulldozer to AMD CPU?

  I'm on OS Windows Ultimate 64 bit on a desktop computer to measure with an AMD FX 6100 processor.  I understand that Windows XP mode can not be installed on a computer with this type of processor, but I think that there is a fix for this.  Anyone know where I can find it?

  Hello Donald,

   

  Please follow the link below to download the patch:

  You cannot install Windows XP Mode on a Windows 7 computer that has a multicore AMD Bulldozer processor installed:

  http://support.Microsoft.com/kb/2519949

  I hope this helps.

• Cannot run the fix for the improvement of the IOM to IOM 11.1.2.0.1

  Hi Experts,
  
  I'm upgrading to IOM for the new patch 11.1.2.0.0, in the guide that the step is given as
  
  

  Set the ORACLE_HOME directory in your system. For example:

  setenv ORACLE_HOME/opt/oracle/mwhome/Oracle_IDM1
  Apply the hotfix for the ORACLE_HOME bundle by using the following command:
  opatch apply

  I do the above given steps, but I'm not able to run the fix it givens me error
  
  

  bash: opatch: command not found

  Help, please!

  You must add OPatch to the PATH variable before running the command opatch.

  OPatch folder is home of the IOM.

• Is the fix for the problems of WebHelp in RoboHelp versions 10 and 11 work when you access by using a Web server?

  I use RoboHelp 10 with the last fix of WebHelp.

  I copied files in the fix to the folder specified in the instructions, regenerated aid and tested my WebHelp on IE 8-11.

  Seen on the spot, the WebHelp output looks very good.

  Help is accessible by users of a web server, so I set up the output newly generated on our web server and tested the output and that's what I found:

  IE 8: Index and glossary are taking 3 or 4 seconds to load, which I guess I very well.

  IE 9: Index and glossary are taking 3-4 second to load. Index entries are too big and use a different font.

  That is to say 10: when you click a topic in the search pane, you get a blank page. When you click an entry in the Index, you get a blank page. After using the Index/Search and then go back to the content page, you get a blank page.

  That is to say 11: entry of Index are cut

  Has anyone else run these question? I can live with the questions about IE 09/08/11, but on IE 10 blank pages are unacceptable. If the fix is not resolved these problems or I do something wrong? Why the fix would work locally but not when accessed from a web server?

  Any info would be much appreciated.

  Thank you

  Mack

  Interesting. When you say the latest patch, which one is?

  (For an overv of all patches, see

  ( https://www.wvanweelden.eu/articles/robohelp-patches-and-updates)

  In IE10, see script errors? And if you press F12 to open the

  Console developer, it shows the errors/warnings?

  Kind regards

  Willam