Difficulty in using TB.

Similar Questions

• Difficulty to use indexing to divide the data into five sets of data

  Hello

  I'm using labview to program a mass spectrometer.  I want to conduct surveillance of the multiple ion where I watch the level of five different masses over time.  The five different masses correspond to five of the tensions that are sent via the DAC to my instrument.  After sending each voltage, a voltage was then read AIN.  The help of indexation and a for loop, I can send fill this function.

  My problem is to be able to plot these data.  I need a field of tension AIN (y) and the time (x) for five tension (mass) and plots to display on a single diagram.  I don't know how to correlate data from indexing to separate into five different mass and then repeat the experience by adding data to each mass using all loop.  When I tried I just get data tracing as a straight line as a set of data when I need five sets of data.

  I enclose my vi.  Any help would be great.

  Your VI base design is incorrect:

  • There is no reason for you to have 2 while loops. One is suffient.
  • You should not open the interface in each iteration of the loop. Open outside, do your work and then close when you are finished loop.

  Regarding the map, get rid of the inner loop and eliminate this Build table you have outside the loop for. In order to have a graphic draw several lines, you have need of a 2D array. Because you use a loop for to acquire a reading at the same time, you'll need create a 2D out of the loop for. To do this, put a table to build inside the loop, then a function of 2D matrix transposes outdoors. See the attached example.

• Problems using BufferApp with Mozilla

  I try to save content I find on the internet using the mozilla browser. I have a BufferApp account, but with content buffering problems. My website http://www.5v5flag.com is a newer site, but this should not create any problems with get content for my blog. Everyone has problems with Mozilla BufferApp.com

  Is the difficulty in using the site (such as a Web site) or the BufferApp extension (http://bufferapp.com/extensions)?

  If this is a common problem, people of BufferApp support might be best placed to answer, but if they are confused, we might be able to spot a conflict of add-on or another factor that they have not heard before.

• How to use Demux in LabVIEW?

  Hello

  Could someone help me on how to split/split signals into a bus several outings? I have conversion Demux of Matlab but have difficulty to use in LabVIEW. Maybe someone knows how to use in LabVIEW or any other method that could achieve the same thing as Demux.

  Example, I got 10 signals on a bus and I wanted to divide for different outputs 5 where the first release contained 4 signals, 2 outputs contained 3 signals and the rest contained 1 signals.

  Signals could be anything, constant or any temporal signal.

  Thank you

  Search for Unbundle in Labview, it will solve your problem...

• Difficulty of re-sync playlist

  I am currently running Windows XP with WMP11. Recently, I added new songs to an already existing selection, and I tried to synchronize the "rocket". However, the "rocket" began to systematically add all the songs on the playlist, including the 'old'. As a result, I had a few duplicates until I caught and stopped the clock.

  I realize a another way to proceed would be to synchronize the songs directly to the computer, and then create the playlist or update the playlist using Winamp. However, is there a way to avoid this difficulty by using WMP11?

  I don't know if this will affect things, but I will not sync automatically - I select manually the playlists to sync and drag-and - drop the desired folder.

  I use it only as a playlist creator/Manager though I may buy the improved version to get wrenching .mp3 of availability. Then I won't need at all to WMP. I just drag & drop all my files. That way I control and the final say of what happens (and does not) my players, not software.

  There are others here who recommend it for synchronization well.

• iTunes and alternative player

  Since apple stopped supporting the iPod classic is there 3rd program/app used with inexpensive mp player who would recommend? I'm afraid to invest in the music from iTunes more because of the difficulty of using freely once it was purchased.

  Apple stopped adding DRM to purchased music in 2009.

  The most recent Apple's music service includes so that playback rights can be withdrawn at the end of a subscription.

  iTunes offers backward compatibility with all the Apple iPod. If you encounter problems, update your iPod with iTunes, start with If iTunes does not your iPad, iPhone or iPod - Apple Support.

  MediaMonkey is an alternative media player good.

  TT2

• Camileo S10 - arrow keys not working not

  Hello

  My new camileo S10 doesn't seem to work properly: sense key work only once, whenever I use the Camileo; so I can't use it unless I turn the power off and turn it back on.

  It's pretty strange and annoying, and I was wondering if the problem was already known, or difficulty whithout using warranty posible.

  Thank you.

  Say you only this hangs buttons or stop working? Other buttons are ok?
  Hmm never read on the subject and in my opinion, it could be something wrong with some of the material. I doubt that you can remedy
  Seems that you should ask a service partner for assistance

• Causing problems of custom data type to deploy the shared target RT variable

  I seem to have some difficulty in using a shared variable published network created from a customized data type when it is deployed as an executable on a target of cRIO RT.  I'll start by describing why I think that this is the rub.  I created my RT VI in the LabVIEW (LV 2012) development environment and everything works fine.  This VI is quite simple, because these were quickly devolved into an exercise in debugging.  The RT VI begins by simply flashing the LED to a couple of times and then starts a loop simple acquisition to read some values out of the material using the analytical engine (while still flashing the LED of the user).  After reading the material, the values are grouped in a cluster and written in a shared variable published to the network defined by a custom control type def.  The custom control contains five floats double precision.  If it's important, the RT cRIO system hosts the shared variable in this case.

  So I have that deploy in the development environment, and everything works fine.  The LED flashes merrily along, telling me that the program runs correctly.  Running a VI host who reads the shared network has published variable gives the desired result.  Everything is good.

  Now, I want the cRIO system to run this simple program by itself at startup.  I build, set it as start VI, deploy it, and then restart the cRIO target.  The LED never flashing... the VI doesn't seem to work.  I'll spare you the major part of the work of debugging and access to the end.  I basically "diagram Disabled" various sections of the code up to the VI began to run correctly in an executable file.  I kept reducing the size of the disabled code until something has been disabled: the writing in the shared variable for the custom data type.

  So, I guess my question is this: are custom data types defined by type def would be personalized orders authorized executables to RT?  I read through the cRIO Developers Guide, my book of development in real time course of NOR and the white paper using shared Variables and I see nothing that forbids it.  I know that there are things not allowed in the executable files that are allowed in the development environment (property nodes façade, dialogue live, operating system specific calls, etc.), but no mention of the shared variable type custom data.  Any ideas as to why my VI is running in the development environment, but does not update unless I have delete the entry on the published network variable shared?

  Thank you in advance for your help!

  You must disconnect the data types of variables and then recompile. You can find it useful to keep on disk, a copy of the original lvlib.

  Don't know if this is a bug or not. It was suggested by someone in the forum that putting the ctl files in the right position (the disk? in the draft?) would allow the rtexe start; I did a quick check and it didn't work then I dropped the tests more far.

• Cannot activate the Vista computer.

  Original title: a worker injured several human rights violated; can not get the activation of Vista SP2... are there others in a similar situation? Help?

  R.A.

  July 7, 2014

  For all those who have the ability to help:

  first: vista dell licensed (1420 Inpiron laptop was invaded changed password and now NOT usable).

  Next: friend graciously made donation to the worker injured a HP Pavilion desktop computer.

  Third: injured worker does NOT receive the commercial companies involved buy analgesic, nothing else, resulting in the need to beg for all the living expenses of family and friends;

  Finally: the injured worker has spent two full days on the phone to get an activation code for Windows Vista to use it on the HP because the Dell is "broken".  Dell would not give same registration for each call numbers, but he said that it should NOT be a problem if the software is used on only one computer and nothing else.  This is true.

  Microsoft says Vista software is licensed to Dell, talk to Dell, again without registration number given by Microsoft for every forwarded call looking for a usable activation.

  Due to the urgent need for activation of vista on HP is the injured worker needs recognition and has great difficulty in using the Microsoft speech recognition and more than 15 years back was able to buy the Dragon Speech Pro 10, without money to upgrade, is desperately request passion to give the activation of the HP computer.

  Legal history of Dell is horrible and shows no compassion for all human rights and Microsoft 'pass the ball '.  This commercial practice does not and should not accept this treatment as a society.

  This business practice is the standard used by all commercial businesses.

  I need you to help change this current trend!

  R.A.

  You cannot use an activation code from Dell on a HP computer.  It is against the rules of license and illegal in most jurisdictions to work around.

  If your HP needs a code or an operating system, you need to talk to HP. They are the ones which were built.  Dell of course will not help you on another computer.

  Be an injured worker does not change the situation, I'm afraid.

• OfficeJet Pro 8610 do not print documents to MS Word

  Hello

  I am owner of an all-in-One 8610 Offijet Pro. It was working fine until this day. Suddenly he stopped printing MS Word 2007 documents. It works fine with other applications (Acrobat, Autocad, etc.).

  I've uninstalled and reinstalled the drivers several times, used HP difficulty application, used the application microsoft Fix, I tried printing on Office 2013, but nothing happens.

  Whenever I try to print a .doc I get a page with a code on it and another filled with dark horizontal lines.

  Hey @Fatalouch,

  Welcome to the Forums of HP Support!

  I would like to help you today to resolve printing problems that you are having with MS Word documents when printing to the printer all-in-one HP Officejet Pro 8610. I understand that you already have many of the recommended troubleshooting steps, and I thank you for all the information, including in your message. I'll suggest a few steps additional troubleshooting here. I know that you have already run uninstall it and reinstall your product several times, but please run the step-by-step instructions below:

  Step 1: Uninstall the drivers:

  Because you have not specified what operating system you use on your computer, I'll provide you with the document on how to uninstall properly. Please click on this support document and simply choose the operating system you are using. If you are unsure about what your operating system, refer to: what is my OS?

  Uninstalling the printer software

  Step 2: Delete the Temp folder:

  1. Open your Start menu and in the box "search programs and files", type %temp% , and then press enter.
  2. When the Temp folder opens, select Ctrl + A at the same time on your keyboard
  3. Once everything is highlighted in the Temp folder select "delete" on your keyboard to delete the files in the Temp folder. No files and folders on your computer will be deleted. This only deletes temporary files. If a file is always be used by a program on your keyboard will rise pop to 'jump' the item.
  4. Once the temporary files are deleted to close the window
  5. On your desktop, right click on the recycling bin and select empty recycling bin

  Step 3: Reinstall the drivers:

  Please select the link below to download the appropriate printer drivers:

  E all-in-one HP Officejet Pro 8610 Printer series full feature software and drivers

  Once you download the driver package allow the download to run.

  1. The installer gets to 100% and then launch the installation screen
  2. Do run installation instructions step by step to reinstall your printer
  3. Once the product is reinstalled correctly, proceed to the next step.

  Step 4: Change of driver:

  Now that the correct driver is reinstalled I'm going you have change the pilot of another driver for the Officejet 8600 series which should solve this problem.

  Please select the following link for the driver: HP Officejet Pro Basic print and scan Driver

  1. Allow the driver to download it and run it
  2. Once extraction is complete the installer can launch, please close the window installation
  3. Go to your Start menu and in the "search programs and files" box type % temp % and click enter
  4. Once the Temp folder opens, click the newer 7z folder. It should include OJ8600 or OJ860 files in what it says.
  5. At the top of this file, you will see the path to the file. It may show something like "computer - local disk c-users appdata - local - Temp - 7z...'.
  6. Make a left click on the right side of the path of file at the top bar and everything should highlight in this bar. Then right click on the bar and copy the path of the selected file.
  7. Close the Temp folder
  8. Click on the start menu, then select devices and printers
  9. In the devices folder and printers, click with the right button on your Officejet 8610 and left click on printer properties
  10. Left click on the Advanced tab
  11. Left-click on new driver
  12. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of printers on the right.
  13. Click the "disk" button at the bottom right
  14. When the "Browse" window opens, simply right click in the path of the file bar and select "Paste" to paste the path of the file that we copied earlier. Click OK.
  15. When prompted choose the 8600 Officejet printer and click Next until the pilot add windows close.
  16. Under the printer properties window, select 'Apply' but do not hit OK
  17. Select the general tab
  18. Rename your printer in HP Officejet 8610
  19. Click OK

  Now, try to print from MS Word!

  Please let me know if the other pilot solves your printing problems. Should you still be questions be sure to meet with your operating system so that I can further steps offered. Good luck!

• z c

  A friend was recently given a new still in box of Compaq Presario C727US. He had apparently no difficulty to use it at the beginning because it has setup the laptop and because it a password. The next day however when he tried to start and use his laptop the keyboard and touch pad were insensitive. I tried to do a "Hard Reset" that I found at another URL which was to remove the two power supplies and hold the power button for 1 minute.

  I am currently at a loss and on to start my Internet search a solution for this. The touch pads showing that he has a power is turned on, but it remains insensitive. I thought initially to be pilots as the laptop is also insensitive to my keyboard and usb mouse.

  If someone could point me in the right direction, I'd be very happy.

  Hello @Stoopidsagee ,

  Welcome to the HP Forums!

  I understand that the touchpad does not work on a Compaq Presario C727US friends ntoebook.

  Can you tell me if they are still using the preinstalled Windows Vista, or if they changed the operating system to a newer Windows 7 or Windows 8/8.1?

  In the meantime, you can find the drivers for the touchpad here: Compaq Presario C727US Notebook PC drivers.

  As you can see, the only driver available for this laptop is for Windows Vista so if the operating system has been changed there is no promise it will work. The fact of a USB keyboard or mouse do not work is a sign of lack of chipset or USB hub drivers and would not be associated with a defective touchpad.

  I can't wait to hear back on your part.

• help with speech reg.

  Start speech reg. get popup that says the recognizer language must match the language of the user cannot change the language of the recognizer in the reg speech interface.please. Panel under Advanced options. I tried to go there but not luck.  Thank you in advance please help.

  Thanks for reply.those two suggestions have given to me.both does not work.really flustrated.if, you have any suggestions I'd be happy to try them.thank to see again you.

  Here:

  DIFFICULTY 1: Using the voice recognition settings

  1. open Control Panel and click on speech recognition icon. Click now on "speech advanced options" link given in the left sidebar.

  2 it will open a new window. Make sure that the language is set to the correct location and 'review documents' option is unchecked.

  

  3 apply changes and reboot your system.

  SOLUTION 2: Add ctfmon.exe at startup

  1. type regedit in RUN or start menu Searchbox and press ENTER. It will open the registry editor.

  2 now go to the following key:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  3 in the right pane, create a new string value with the name ctfmon and set its value to ctfmon.exe

  4 close the registry editor and restart your system. After the reboot, you shouldn't get the error message and speech recognition should start without any problems.

  If none of the above suggestions work, you could do a system restore to a time where the WSR worked on your computer. The last suggestion if neither of those work, watch Dragon NaturallySpeaking recognition voice quality.

  Marty

• Problem with sound on sencha app

  Hello everyone, I hope that someone knows this problem.

  I recently posted an application built in sencha: http://appworld.blackberry.com/webstore/content/33239900/?lang=en

  I'm having a problem with the audio function, it seems that the sound crashes the app on some devices. I tested the app on the Blackberry Dev B Alpha and it worked perfectly, but a friend told me that the application crashes on Q10. I use audio to OGG format, the latest firmware for Dev Alpha B and the latest version of sencha.

  I found the audio should be longer than 300ms to play properly. If you use a sound less than 300 ms, then interference sound present and in some cases, she repeated two or three times in the same key.

  I can't reproduce the bug, because I have no Q10, sencha use HTML5 audio tags, so the behavior can be reproduced using the:

  document.getElementById('test').play ();

  Any ideas on this subject?

  Thank you for your time

  Hello, I have solved my problem, I share with you what I found:

  Question

  His cheek twice by pressing the button.

  Difficulty

  Use a sound like 300 milliseconds.

  Question

  His stuttering using tones.

  Difficulty

  Do not use the sine wave tones, use rather rectangular waves.

  Question

  DOMExceptions: DOM Exception 11: an attempt was made to use an object that is not or is no longer, usable. During playback of the sounds.

  Difficulty

  Create a new Audio object each time you want to play a sound. This fix may cause an impact on the performance of the application while playing sounds:

  Audio var = new Audio('path/to/audio.ogg');

  audio. Play();

• LocationListener Vs getLocation GPS coordinates?

  Hello

  Just a quick question.

  I've read several times that the frequent difficulty, to use a LocationListener instead of lp.getLocation (repeated).

  What can be considered "frequent"?

  All the examples I've seen get GPS coordinates every 5 or 10 seconds.

  On my particular application, I do a lp.getLocation () every 15 minutes... but I want to change that to 5 or 10 minutes.

  I have two solutions work, I just would like to know which should I use for a fix every 5 or 10 minutes?  One who takes fewer resources battery and device?

  Thank you!

  I think that locationprovider would be nice in this case.

• BlackBerry Smartphones Double flashing red light after failed update - can not turn on!

  Hello! When I installed my BB Desktop Manager and connect for the first time in my Bold 9700, he asked if I'd like to update various features on my phone, to which I agreed. The update froze - I do not altogether during that stage, but I remember that it is in the stages end as well as the scene in which he froze began with the JVM. After waiting an hour or two, I have disconnected my Blackberry, not knowing what to do. The screen stays black and the red light starts flashing.

  I looked up the fixes for the problem and they seemed a JL_Cmdr used to do a full wipe - simple - but I am on Windows 7 and it is not compatible. I get a brief command prompt screen for half a second before it closed.

  The second difficulty involved using the command prompt to get the charger in the AppLoader file - but I ran into another problem when trying to open Loader.exe, I have one "the Application Loader requires Blackberry device manager to install.

  Then raising THAT fix, I downloaded a new OS and redownloaded the Desktop Manager, but I get the same error.

  It's really depressing. Any advice or assistance would be greatly appreciated.

  Hi and welcome to the Forums!

  JL_CMDR works fine in Win7. Don't launch from the file Explorer. Instead, open a command box (start > run > CMD). Then browse (just like in the BACK) where it is and run it from the command line.