Difficulty reading data of a radiometric sensor Ludlum (model 4303)

I have great difficulty reading the data a radiometric sensor Ludlum (model 4303). I'm suppose to get a CF and LF at the end of 48 characters, but never see it. Information provided with the device are not very descriptive, so it may very well be me, it's a bad thing. My code is not very neat but I add it anyway. Any suggestions I can try?

I feel like a fool. I used bad baud rate. It works perfectly now. Thanks for the reply.

Tags: NI Software

Similar Questions

  • Read data from digital temperature sensor

    I am beginner.

    I have digital temperature sensor CON-TSIC type TO92 (3 pins) with a digital connector - 11-bit

    http://www2.Produktinfo.Conrad.de/datenblaetter/500000-524999/502186-da-01-de-TSIC_206_TEMPERATURSENSOR_TO92.PDF

    LabVIEW 8.6 and OR USB-6211.

    How to read a current numeric value of the sensor (all bits 11)?

    I plugged the digital connector with connector PFI0/P0.0 (In) (PIN 1) of NOR-USB but I have read that the values null.

    Thank you.

    This sensor has a digital output. NEITHER USB-6211 is data acquisition unit. You must have a sensor with analog output. It is not difficult to obtain. Ask the people who sold you your current temperature sensor

  • read data with rs-232 port

    Hello

    I need to read data from an instrument using RS-232 serial connection. The instrument transmits data as soon as it is turned on. the power button is on the instrument, and I need to send a signal to transmit data. I use NEITHER usb to RS232 hub as my laptop is not a RS-232 port. I tried the basic writing and read.vi but can't get the buffer.

    Setting for serial port:

    Bits per second: 9600
    Data bits: 8
    Parity: None
    Stop bits: 1
    Flow control: no

    Transmitter of data is in the format below

    19/11/08; V0.48 pressure; UNITS = lb/po2; ALARMS: HP1 = 0.00; LP1 = 0.00; HP2 = 0.00; LP2 = 0.00; HP3 = 0.00; LP3 = 0.00; HTM = 0.00; LTM = 0.00;
    Sensor 1 ID = S1-220160-1008; MAXP = 6.03. 14/11/08; 0003-PZ =; CF1 = 1.081; CF2 = 0,953; CP1 = 54.00; CP2 = 6.00; CCF = 1.000; CPZ = 00000
    Sensor 2 ID = S1-220161-1008; MAXP = 6.02; 14/11/08; PZ = 00002; CF1 = 1.012; CF2 = 1.013. CP1 = 54.00; CP2 = 6.00; CCF = 1.000; CPZ = 00000
    3 sensor disconnected;
    RT, P1, P2, P3, TM
    10:54:09, 0.02 0.02,-.-, 0.02,.

    Can someone help me understand why the program fails to read the data.

    Thanks in advance,

    Rambeau

    Try to run with Hyperterminal to see if you have found anything of your device.  When Hyperterminal works, then try your VI.

    You don't need really the business structure in your vi.  You wiring is difficult to keep up with all these curves and segments being hidden.  Here's how your vi should look like:

  • My JournE Touch tablet is not read data on USB

    Hello!

    When I plug my USB stick with games and open it I see nothing, as the Tablet is not read data on usb.
    Can someone help me?

    Guide me a bit.

    Journ.E touch manages and supports SDHC up to 32GB.
    Supported file formats are:

    * Image * JPEG file format
    * Audio * file - MP3, WMA, AAC and WAV format
    * Video * format of file - AVI, MP4, 3GP, FLV and WMV

    Other file formats are not supported.

  • Equium A200-1V0: DVD-RAM UJ-850 s does not read data discs

    My laptop seems to have decided to stop reading data disks.
    However, there is no problem with the audio CD, but when I insert a data disc such as the software considers the disk is empty and try to format the drive.
    I searched internet day for solutions and tried without success to the following:

    Removed the UpperFilters and LowerFilters in the registry.
    Uninstalled and reinstalled drivers.
    Bought DriverWhiz (waste of money!)
    Tried to access disc command prompt that generated the message "incorrect function".
    Tried to use the enforcement function and access an exe file that I know is on the disk, but it comes up saying I need to format the drive
    Uninstall service packs
    I even thought it might be something to do with the MagicVirtual drive I had installed so I uninstalled completely which
    I uninstalled real player

    I'm about 3 minutes to destroy my laptop so any help would be appreciated.

    Laptop: Equium A200 - 1V0
    Drive DVD - RW: MAST * a DVD-RAM UJ-850 s ATA
    OS: Windows Vista

    Hello

    Deleting upper and lower filters was the first idea that I'd like to share with you, but it seems that you have already tried this solution proposal

    How about windows boot CD or a linux live CD?
    Is this possible?

    If not then I thing that the question could be linked to the wrong material work I m thinking on the issue of laser lenses eventually the laser lens can not calibrate properly and this could be a problem

    In this case, only a replacement CD/DVD drive can help greet

  • "Could not read data" when you try to print from Android

    Hello. I have a printer HP Officejet 6700 Premium, which is connected via ePrint/HP connected to my Google account so that I can print from my Google devices (Cloud Print). While this works very well when printing from my laptop (29 Chrome on Ubuntu 13.04), it does not when printing my Nexus 10 (Android 4.3) or my Galaxy Nexus (CyanogenMod 10.1.3). I tried printing both outside and inside the network on which the printer is on, but whenever I get "could not read data" in the Cloud Print dialog box. It seems that Cloud Print knows that the printer exists, since it is on the list, but it cannot communicate with the printer. Any way to solve this problem? He's good enough additional features only on my previous printer, who died of old age.

    It seems to me that the question is in fact Cloud Print related. Here is the support page: https://support.google.com/cloudprint/?rd=1

    Remember that Google Cloud Print is still in beta phase. Good luck tomslominski.

  • HP Pavilion X 2: HP Pavilion XP cannot read data from USB DVDs

    We bought a HP 10-ND200ND (HP pavilion X 2) in the Mediamarkt and tried to install Microsoft Office from a DVD via a DVD USB Samsung player.  This was not possible. According to Support Mediamarkt this product is a Tablet and so cannot read data DVD´s. Only General to play music. To buy a laptop computer for this application. The operating system is Windows 10 (32 bit). Is that correct. Please advice.

    Hi Banhien, the cause is known. I have seen other comments on the HP forum and concluded that the reader needs more power than is available through the USB connector of. I added a hub that can provide power to its connectors USB, HP X 2, by car and the problem has been resolved! It was noted that the mini USB is also more powerful and with the type of adapter USB USB C it might also work, but I did not test this, because I do not have such an adapter. It's odd that such a mini can provide more power. It is surprising that the HP Pavilion X 2 does not have a powerful USB. But the problem is solved. Thanks for your response! Best regards, wiely

  • Satellite L30-134 PSL33E: CD/DVD player can't read data CD

    I bought my laptop (Satellite L30-134 PSL33E) 4 months ago and I had no problem with the optical drive of my Satellite. But yesterday, I discovered that my drive is no longer can read data CDs.

    I created a CD with the Toshiba ToDisc utility which contained MP3s. The CD works fine on another computer but when I try to play them on this computer Windows laptop tells me that the CD is blank and asks me if I want to save data.

    It doesn't have this problem with the DVD, I can read and write perfectly. My optical drive is a CARPET * a DVD-RAM UJ - 841S. Windows says I have the latest driver for it (5.1.2535.0) but it says it's from 2001 (?) in the properties under the selected hardware.

    Help, please!

    Hello

    It is not easy to say what the problem is here. If you have time please check THIS document.

    Support Bulletin 98081245 CD burning: suggestions and troubleshooting. ‘

  • nvstor64 error - failure of HARD drive to read data

    Backup and restore system is unable to complete - after investigation, about an hour after the backup operation to the system event log records a large number of errors in nvstor64 - "failed to read data from the HARD drive" and the abandonment of the backup operation.  After investigation, I found that the nvstor64 replaced the windows driver update disk drivers HARD during a computer video card.  After many contacts with support from nvidia and further consideration, the problem is reduced to the State of the offence alleged in the second hard drive backup (Seagate 1 TB Baraccuda - development since 2/2011).  When you run the HP disk HARD diagnosis on this drive, it does not hard "SMART short self-test" step with the error message "fails first LBA 45511183".

    Here's my question.  Run the chkdsk BACK on this disc utility passes - no bad sectors.   The HARD drive is visible in the operating system and appears to be fully accessible.  I moved 100 GB of files from the disc to others in the network with no apparent problems.  This really works test by the "SMART short self-test?  This is a 'false positive' test failed?

    Paul

    Pavilion p6210f

    Windows 7 64 bit

    6 GB of system memory

    C: WD 1 TB 7200 RPM HARD DRIVE

    F: drive HARD Seagate 1 TB 7200 RPM

    Hello smithdp,

    The SMART test tests in-depth hard disk. Here's the Wikipedia record for the short trial (they can explain better than me).
    http://goo.GL/XYCvm.
    Short
    Check electrical and mechanical performance as well as the disk read performance. Electric tests could include a test of memory buffer RAM, a read/write circuits test or a test of the read/write head elements. Mechanical test includes seeking and servo on the data track. Scans small parts of the drive surface (area is provider-specific and there is a time limit on the test). Checks the list of areas that may be read errors in waiting. (Usually less than two minutes.)

    Having said that it is not perfect, because no test is, it could be bad, or it could be on-site. Sometimes the SMART test can give a warning, but the drive will not fail for another month + is just a 'heads up '.

    Now, with your error in particular LBA is logical block address. The error you are getting is that there is a block (45511183) that the test has detected an error on.

  • CAN read data using NI-XNET

    I was playing around with the new NI XNET drivers read CAN data and I need some experts advise on this topic. In the frame API, I remember to be able to check that if there is data on the queue of read before reading, with Xnet, I have not found this option. XNET use playback function that will read the entire queue without worrying if the data is present.

    This causes me a problem, because I'm constantly calling loop playback function, the data are written to a table of images, then the table will be empty for the next iteration because the reading queue was empty during the second reading.

    How can I continually read data from the queue of reading without accidental my output table?

    I tried the survey/Deque method, but it works well for me. Is someone can you please tell me what is the best practice for continuously reading the CAN data and treatment using drivers XNET?

    Thank you

    Sam

    Looks like you want to use with your berries shift registers. Discover this Subvi, which is part of the expedition OR XNET examples. You can find examples from the Finder example under help > find examples.

    Apart from converting it the image into a string, the additions loop the string to an array and use the shift registers to pass the array in the iterations of the loop.

    Is that what you're looking for?

  • Reading data external pc

    Hi guys, I'm kinda new to the instruments OR, and I need to understand how to read data from a PXI-1042 q, which has a PXI-8187 embedded controller and an array of the PXI-4472. I need to read the data to an external computer via one of the serial ports on PXI-8187, using a python House program. I found something on how to send and retrieve data from a serial port using pyVisa, I still don't know how to communicate with the PXI-8187 and select the appropriate entry in the PXI-4472. I need to create a custom PXI-8187 VI do listen to the entries via serial and send output to the same port? Any suggestion will be appreciated.

    Thanks in advance!

    DocShadow wrote:

    do I still need create a VI for the PXI-8187 with my computer via the LAN interface?

    Yes.  The controller is another computer.  Treat it as one.  This computer must interface with the PXI instruments.  Your computer you write Python scripts for has no interaction except through any interface that you create, both in series or LAN (I recommend using both the LAN).

  • Simulation read data file (*.) (DAT) by using the worksheet (file reading eror - zeros)

    Dear OR community,

    IM pretty new in LabVIEW, so I have a few broblems with reading the data.

    I take a screenshot and mark a problem like part - A and part b below:

    The description of the goal:

    I do a mathematical simulation, using the old software whitch exporting results as shown in 1... DAT file, as it shown in the picture (Notepad).

    First of all I need not read these data then I need to draw the graph XY.

    Description of the problem:

    I created a LabVIEW program and im using a funciont reading of spreadsheet per section B - but when im trying to read data im getting all zeros...

    so I can't identify my problem... What is the problem?

    I try different file to read its Case_test_working.txt and everything is good with this data but when im trying to read *. DAT file zeros is array...

    I tried to use seperator different symbols, also try to imort data to exel then export to *.scv, *.txt formats, but the performance was the same as that indicated in part-A.

    Whenever I get zeros, but not a results as in *. DAT or another file format exported with the same data.

    Please be respectifull and understand that im still newbie in labview but I think its excellent software of filtering of the analysis of data and calculations, so I want to master this software for my future use.

    Respectfully,.
    Tomas E


  • Can read data from xls using teststand 3.5?

    Hello

    I use 3.5 TestStand and LabVIEW 8.je know these are quite old versions now, but we must continue with this on a test bench.

    My question is how can I read data from the file xls using TestStand 3.5? I have already mentioned a few posts on this, and one response suggested that I should use "tGetExcel" using ActiveX adapter. I tried to run the test example related to "http://forums.ni.com/t5/NI-TestStand/Write-or-read-to-Excel-from-TestStand/td-p/250439/highlight/tru...", but a run-time error. He says that "the tGetExcel type library information not found. Make sure that the server is registered in the system.

    TestStand 4.2, I could easily run excel at the base of operations by using the Office Excel Toolkit.

    I was wondering, is there another way, I can read just .xls file data by using Teststand 3.5?

    Thank you

    Niraj.

    Please check this example for charger of property:

    C:\Program Files (x 86) \National Instruments\TestStand 3.5\Examples\LoadingLimits

    This shows the limits of excel file loading.

    But you can load the values of the variables-consult the help file / Reference manual for this type of step.

    Also in the loader type forum search property - you can find more information.

    I hope this helps.

  • play sounds temporary and file of your choice when reading data with VISA functions?

    Hello.

    I read the function of reading data with VISA and then I use as multiple functions to display data on the graph. everything is OK.

    now, I want to play a sound specified (like a song in my desired folder 3s) signal which cross above the specified value range. then after the desired time, it will wait still new cross above the specified value and this repetition of the procedure until I stop the program.

    Data MCU is from and it does not stop when his game system and what system of incoming data for this part (his play) will ignore them pending that outdated.

    I use this for reading data and part VI mentioned which belongs to her is empty and I don't know what I have to do?

    altougth I use an another while loop for his apartment because I want to save time CPU.

    Thank you.

    I recommend you do the data type of the notifier a cluster that contains a path and a numeric (double).  The path indicates the reader what file to play.  Digital is the duration.

    Now in a way a bit complicated, but really good stop your second loop.  Do not use a second notification.  Instead, send the normal notification but not use a path for the path in the cluster.  Your second loop can write a check for the path of a not and stops when that is received.

  • read data from xlsx file

    How to read data from an Excel 2010 worksheet with the .xlsx extension?  The data I want, it's on one of the 10 tabs in the file, I have to choose which programmatically.  I have the Report Generation Toolkit for LV2012, but all the screws that come with it seem to focus around writing data to a spreadsheet Excel and make charts and whatnot.  I want to * read * an Excel worksheet.  Seeking answers led to many 'Open it and save it as tab delimited text', which I can't do because I need data from different tabs, and because this file is quite dynamic with many users opening and adding several times.  In order to save the tab I want as a tab delimited text file per programming, I'm back a square, how to open it?

    My solution would ideally fill in the blanks of: spreadsheet.xlsx---> _---> 2 or 3D data table.

    Thank you

    Adam

    This fixes:

    https://decibel.NI.com/content/docs/doc-3033

Maybe you are looking for