Difficulty to get a quick Web work - "missing partition HP_TOOLS" error

Similar Questions

• HP Pavilion dv6-6c40ex: HP Quick Web works not

  Hello!

  Until November 5, 2015 HP Quick Web worked fine on my laptop. But now it is not. When I connect you to the screen showing only black HP Web quick, even tried to open it from the Home button. Web launcher does not, the parameters and the widgets also do not open. Help option also does not work. Can you help me?

  Kind regards
  Joseph Francis H. Dubal

  Hi @Rajendranath,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6-6c40ex Entertainment Notebook and issues with programs not working not properly. You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop. I recommend somewhere around November 1, which ensures that the parameters that have been changed are fixed.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

  Please let me know how it goes.
  
  By clicking on the Thumbs Up below, you can say thank you! .
  
  Thank you.

• newbie on getting interface question web work 3424 and 3448 (remailers)

  Hello - I'm over sale of this announcement because the situation has changed.

  We are a church and we try to expand our network.  the requirements are to install a public thread-access point (WAP) on port E1 and E2-48 ports to be part of a community for the Church Office staff.

  We do not want anyone on the E1 - WAP to access what anyone at the Church Office.   I have a configuration below script that works very well to meet our requirements, but as soon as I run one of the following commands, I'm more able to access the unit via a Web page:

  whenever I run one of the following commands:

  Switchport mode private - vlan community
  switchport mode private vlan isolated

  I'm more able to use Web page interface.

  Here is the script I used to set up our unit 3448 so far:

  Enable
  Configure
  interface vlan 1
  IP address 192.168.0.250/24
  output
  Default IP gateway 192.168.0.1
  username admin password admin level 15
  database of VLAN
  VLAN 1000
  output
  interface vlan 1000
  private - vlan primary school
  private - vlan community add 10
  private - vlan isolated 20
  serial interface ethernet e2, e4
  e2-48 ethernet serial interface
  Switchport mode private - vlan community
  switchport private vlan community 10
  e1 ethernet interface
  switchport mode private vlan isolated
  switchport private - vlan isolated 1000
  g4 ethernet interface
  switchport mode private - vlan promiscuity
  switchport private - vlan 1000 promiscuity

  with this script, I can continue to ping from any port E2 by E48 and no port 1.  I am also unable to ping any other port than port E1 according to the needs.   but I still need to be able to access the web interface of * ANY * port.

  Yes, that sounds like a good plan to use teamviewer to access it remotely. On the other hand love IE, the switch was released in 2005.

• Failed to get the NIC to work - driver code 10 error

  I read a lot of similar posts, but not exactly like mine.  I've tried and failed on the advice given in other posts, so...

  Replaced the HARD drive in Inspiron 1420 my wife, Vista, Intel processor dual core T7250s

  Card Broadcom 802.11n

  Kept all the disks provided with the lappy, Prepped the HD by media rules, support of windows and the mediadirect and resources CD...  they had all autoexecs and seem to go very well.   Unable to connect to the net... He checked out on the technical, found device code 10 failure...  All other drivers seem to have loaded...

  tried to update the driver...  He said that she already had the appropriate driver. -do not

  DLed the driver Broadcom to one inch and installed - no difference.  Restarted... many times during all this.

  Read here we could install order - thought I might try manually.  Searched drivers Intel T7250... here, "currently unavailable".

  what Miss me?

  Hello! do not have the error code 10, but got a message from "driver or hardware related problems. use to have wifi hook up last week, also said driver Broadcom 802.11 > NO FIXED.

  ABSN ADAPTER WIRELESS SDIO, HELP I'M LOST AND CAN'T USE THE 10 PRO 5056 PLACE!

  THANK YOU BOB MAC

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• I did a clean install of firefox 31 and now I can't get on any web site of Ustream, it works on IE and Chrome

  I did a clean install of firefox 31 and now I can't get on any web site of Ustream, it works on IE and Chrome.
  I tried all the advice I could find on the help section, but nothing works. I reinstalled everything is new so it's all of this to date, but not a single site Ustream.tv will load. I can put them on IE and chrome.

  The question may be because of your corrupt cookie (cookies.sqlite) file

  Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete the other files of cookie present as cookies.sqlite - journal in the Firefox profile folder where the cookies.sqlite file has been corrupted.

  • http://KB.mozillazine.org/cookies
  • https://support.Mozilla.org/KB/deleting+cookies

  You can also check whether DOM Storage is enabled.

  • http://KB.mozillazine.org/DOM.storage.enabled

  ______________________________________________________________________________

  Create a new profile as a test to see if your profile is the source of the problems.
  
  See creating a profile:

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem
  
  Profile backup and restore

  • http://KB.mozillazine.org/Profile_backup
  • https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I can't get Macromedia Authorware Web Player to work.

  Running Vista on a 64-bit Windows computer. I can't get Macromedia Authorware Web Player to work. When I download the program I've ever seen the "film playing below. I see only a bar saying "loading files" when I try to open a file in Authorware.

  If you are using IE7 or IE8 and Vista then try to add adobe.com to the trusted sites list. This will make the site open to disable protected mode. You can delete the site from the list of trusted sites once you're done, if you wish. It should not affect other content that you are running.

  Mike

• HP QUICK WEB

  I recently noticed by turning on my laptop by pressing on the web (HP Pavilion dv6) hp quickweb button does not load.

  It says cannot find the drivers and it is missing/corrupted

  It usually works on my lapotop but I don't know what happened.

  Anyone know how to fix this?

  Thank you

  Oli

  Hello OliSegall,

  Welcome to the HP Forums! I hope you enjoy your stay!

  I understand that HP Quick Web no longer works. I apologize for the late reply, but I will do my best to help you!

  I think a simple uninstall and reinstall the program will suffice. To uninstall it, go to control panel, then programs and features. You should be able to uninstall the program from the list.

  Once it is uninstalled, you can use HP Recovery Manager to restore and install it. This document provides additional information on this task: using Recovery Manager to restore the software and drivers

  I think that this will solve the problem. Whatever it is, please provide your results. Thank you for bringing This problem on the HP Forums. Have a great day!

  Mario

• I can't get Google maps to work on Firefox.

  I can't get Google maps to work on Firefox. I have a web site with a Google map on this topic, but potential customers using Firefox will not be able to use this function to locate me. Can someone please help me solve this problem?

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Satellite 1800 Windows XP - can't get Ethernet/LAN to work

  Hey everybody,

  I am struggling with this for hours...
  I installed windows xp on this old laptop, Satellite 1800 PS181C, and I can't get the drivers to work for ethernet can work

  It worked fine when I had windows 2000 on it, but as the OS crashes constantly, so I opted for XP instead.

  In Device Manager, it lists the network adapter under 'hidden features' for a reason, it is called "Intel 8255 x-based Fast Ethernet.
  It is said there is a driver installed for it, but when I try to create a new internet connection, it tells me that no adapters are installed!

  I tried the site LAN driver, the last that appears is for windows 2000, I tried anyway according to the installation instructions, didn't work at all

  I watched the driver on the Intel Web site, she me tied to a PROWin32.exe file, I tried to install, it says I have no card compatible?

  This leads me into the wall. There must be a way to make this work.

  Help is very appreciated!

  Thank you

  Can you please send the exact model laptop (1800-xxx) name?
  What WXP version do you have installed (service pack)?
  Have you consulted the Toshiba download page? This model is supported for Windows XP Home edition?

• MG6320 on Mac - can't get the installer to work

  I can't get the installer to work, fails to connect to the printer without wireless or wired. However, the Apple system preferences printer box can find the printer, allowed me to install the Apple driver, and I can print. I can also scan but only by using the Apple software. What should I do to get the additional applications provided with the printer to work, and why the all-in-one installer driver does not work?

  I am running Mac OS X 10.7.5, no firewall problems.

  Thank you!

  Hello.

  Please try to download the latest drivers for Mac OSX and software on our Web site.  These items can be downloaded from the following link:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg6320#D...

  If additional information is required, please call us at 1-800-OKCANON.

• What is the measure to take to get my card to work with my hard drive that I just put in?

  What is the measure to take to get my card to work with my hard drive that I just put in?

  Run Windows Update and install all updates.

  Also, visit your PC manufacturer's Web site and install the latest driver.

• Problems starting Windows XP. I get "the following file is missing or damaged. \WINDOWS\SYSTEM32\CONFIG\SYSTEM"message.

  Original title: start windows xp questions

  Windows xp. When I try to start the system I get the message "the following file is missing or damaged. \WINDOWS\SYSTEM32\CONFIG\SYSTEM... I have an xp disk and code but not sure if it is the origanal. When I start the computer, it does not start the windows xp disc.

  If you get the message hal.dll missing, your system is still booting from the hard drive and do not boot from the XP Recovery Console CD (I hope that you have created).

  There is no hal.dll on the CD you made if all goes well.

  You must enter the BIOS of your system and make the first boot from the CD to your Pcakard device Bell looks like it firstly, instead to focus first on the HARD drive (make the drive the second choice for now).

  Searching the Internet, I found a message that says to enter the Packard Bell BIOS you must do this:

  Users of Packard Bell, you can access the BIOS set up by pressing the keys F1, F2 or del

  I don't have a PB, so I can't say for sure if that works, or what to do after that - you will need to look around the BIOS for things like the boot order boot priority, etc. and make the CD drive the first choice, second choice HARD drive, save the settings, then you can boot from the CD I hope that you have made using these instructions.

  Generally when the system detects a CD is inserted, it will sell you a message like this:

  Press any key to boot from CD...

  Then all the button and follow the rest of the instructions...

• Black Berry Web Works cannot find Java.exe

  I had work Web works perfectly fine on my computer with the exception of the signature tool do not often.

  I was recommended to make sure that I was using JDK6. So I uninstalled JDK7 and installed JDK6.

  Now, I get the following when I try to package my app.

  Cannot find Java.exe

  So I reinstalled JDK7 but now I still get the message.

  How can I fix?

  See this post, same problem I think:

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/Java-not-recognized/TD-p/1772631

• Strange problem of displays Web Works SDK (SDK detected Incorrect)

  I have no problem installing the sdk on another computer but at home on my XP machine after installing the AIR sdk, and then try to point to him when to install the web works package she complains an Incorrect SDK.

  I got the SDK in the same place as before http://www.adobe.com/products/air/sdk/

  and got the web works package to the: https://www.blackberry.com/Downloads/contactFormPreload.do?code=DC727151E5D55DDE1E950767CF861CA5&dl=...

  Anyone got any ideas as to whats going on?

  Ah... That's the problem...

  Adobe has changed its web page so that the AIR SDK 2.6 at this link.  If you follow the links on the page to donwload WebWorks SDK updated, you should get the link for the SDK 2.5

  http://us.BlackBerry.com/developers/Tablet/WebWorks.jsp