digital alarm

Similar Questions

• DI USB 6008 issue in Labview

  Hi all

  I did some simple laboratories with my new DAQ6008.

  I am following the video tutorial "entry analog with digital alarm" on the following virtual demos tab

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/14681

  The problem is when I run the VI, which is the same as on the video, I get an error message, I have pasted below:

  Error-200524 occurred in the DAQmx write (Digital 1-d 1Line Bool NChan 1Samp) .vi:2

  Possible reasons:

  Scripture cannot be performed because the number of data channels does not match number of channels in the task.

  When writing, provide data for all channels in the task. You can also change the task so that it contains the same number of channels as the written data.

  Number of channels of task: 1
  Number of data channels: 10

  Task name: _unnamedTask<268>

  The only difference between what I do and the vid tutorial is that I have a USB6008 and the 6009 is used.

  Any ideas what the problem may be?

  Hi Marko,

  The problem you encounter, it's that your DAQ assistant is set up at the exit of a digital line.  For this he needs a single Boolean value, true or false.

  The error occurs because you are providing 10 numeric values and it cannot convert the value 10 in 1.

  If you post your VI I can better advise you where the error appears.

  Best regards

  John

• an alarm can be set to control an external device using the digital output?

  My employer is considering buying a 6210 DAQ and SignalExpress (we currently use a branded DATAQ device).

  Looks like I can use the alarm function SignalExpress to define a logic high or low line, controlling a SSR to stop a pump (a non-critical application).

  Can I use SignalExpress in this way?

  I know LabView can do, but there is no way that the company appears for him.

  Thank you.

  Hi Jack, this is Paul with Applications Engineering at National Instruments.

  SignalExpress supports the functionality you want.

  «Once you have configured your signal to acquire you can go to "Save Options" > "Alarms" and then set the alarm conditions, and then choose your Action to alarm as «Defining the digital line»»

  I've attached a screenshot of the example of this configuration.

  

  Note here that I put it down when the alarm turned on.  You there are other options, including a rocker.

  Let us know if you have any other questions!

  Paul

• What is an C31:23 alarm on a digital 8 camcorder

  What is an C31:23 alarm on a digital 8 camcorder

  Hello and welcome to the community of Sony
  Thanks for the post.

  The C:31:23 error code indicates that the camcorder has detected a problem that requires a reset of the power supply.
  Check if the camcorder battery is fully charged.

  In order to reset the camcorder, follow the steps mentioned below.
  (1) turn off the camcorder.
  (2) remove the battery or disconnect the AC adapter for 60 seconds.
  (3) Insert the battery or reconnect the AC adapter.

  If the problem persists, you can try to reset the camera to factory default settings.
  All personal settings, including the date and time of return to their default settings.

  To reset the camcorder, press the RESET button with a small pin sharp object for 2-3 seconds.

  If this does not resolve the problem, the camcorder may require service.
  You can start the service request for the camcorder from the following link:
  https://eService.Sony.com

  Thank you.

• have iPhone 6 more how we set up an alarm?

  I have an ipone 6 more, how do we set up an alarm?  Also on my Apple Watch, how do I set an alarm, help please!

  JFK

  If you want to set an alarm that you want to open the app "Clock" and at the bottom, you should see "Alarm" with an old above her wake mode. Who hit and top right, press on the "+" and you should be able to set the time, how many times it repeats itself, the label and the sound.

  For the Part of Apple Watch. You can hit the digital Crown and you should see something that looks like the Alarm key I explained earlier (if your applications are prepared by default it's on the far left). Success that force key on the screen and press 'Add alarm' from there you can do what I explained earlier. Hope you understand how to proceed. Good day!

• The alarm will work even if my phone is turned off?

  I was wondering if the alarm on Apple Watch still works even if the phone is off or out of range.

  Hello

  If you set an alarm with the alarm application on your watch, it will work even if the iPhone is disconnected (even when it is out of range or turned off).

  To set an alarm on your watch, go to the home screen (via a simple press on the digital Crown) and press the alarm clock app icon.

• 24 v digital signal of the event from the host to the fpga power on/off

  Hello forums or

  Sheet material

  cRIO-9074

  module or 9472 digital module 24 V output c series

  To expand on the topic described,

  I want to be able send a trigger to alarm the fpga digital 9472 out that lasts 30 seconds using the operating system time real clock time on the host computer

  The way I approached this problem is that

  In the loop where the event occurs, if the event trigger is defined then the fgv has a time stamp when the event occurred is sent.

  In the loop that communicates with the control of fpga, I write to the control based on the condition that the difference of the current time checked and fgv time is 30 seconds or less, then it will send the value true, otherwise send fake and wait for the next occurrence of the event.

  The main problem after implementation of this is that 9472 led does not turn off when the false value is sent to it.

  cordially Mzamanstl

  Timer Keeper SD is a FGV so that it is written for her, once the event occurs

  So if the event occurs so timestamp is stored and then the difference of the timestamp result is<30>

  then a true value will be sent to the module of 9472

  So basically I want the light and I want to do the 24 v output for 30 seconds then turn off and wait for the next occurrence

  I think the method that I test it with is not very good, because I realize other factors that may contribute to this problem, so I think I found another way to test

  and I will try it but its will take time.

  cordially Mzamanstl

• Problems with fractional alarm levels

  Hello

  We use LV8.6 with module DSC under XP Pro.

  I am building an application that needs to configure/monitor alarms on deployed locally variable shared double digital.

  I don't seem to be able to define levels of fractional alarm through in Distributed System Manager or Project Explorer. For example, I'm trying to set the alarm HI_HI to 1.50 level. What I see, is that the values change when I get it, but it gets rounded up to the nearest whole number if I open properties for this variable shared once more (or property node allows you to read).

  If I use the node property to set the levels I am able to get fractional values. There is a problem with automatic receipt of the alarm in this case, although (the alarm do not auto-reconnu when the value of the variable returned to non-alarme interval).

  I would appreciate comments on the issues that I am experiencing.

  Thank you in advance!

  Far below the level of the alarm you have tried going?  In LabVIEW 2009 at least, there is a dead zone which can be defined for each alarm.  By default, the dead zone is 1, which means that you must pass at least one point below the alarm so that it auto-reconnaître.  Herea good help file that explains exactly how it works.  In short, if you want to auto-reconnaître when the value is less exactly the alarm level, then you have a dead zone of 0.  I hope this helps.

• DSC: recognize the historical alarms

  Hello

  I have some problems with the DSC alarms data contained in the historical database.

  The situation: the Shared Variable engine broken several times while my application is running (don't ask why). This lead somehow to alarms unrecognized in the historical database. The problem is that they cannot be recognized more by using recognition of vi alarm. My view alarm history always shows them as not being recognized and the user tries to recognize without success.

  Is it possible to get rid of these skeletons of alarm?

  Kind regards

  Thomas

  Hi Thomas,

  Please check this KB http://digital.ni.com/public.nsf/allkb/9D3A81218264C68686256DE1005D794F?OpenDocument for the removal of old messages.

  Do not hesitate to let us know if you have any problems.

  B.R.

  Wayne

• You can dim the brightness of the display of the alarm

  I tried the alarm on my new Apple Watch. The screen lights up a few minutes before the alarm sounds. It gradually increases in brightness. The problem is how bright Gets the display before the alarm sounds. He woke up before the alarm - it was like a flashlight shining in my eyes. Is it possible to adjust the brightness levels fir alarm?

  Try adjusting the brightness slider > https://help.apple.com/watch/#/apd62807a9f3

• Fantom iOS 10 alarms

  I have iPhone 6s more with iOS 10.0.2. Today, it is at least the second time that an alarm on this subject which is quite unexpected. This time, while I got on a train to work. I know that I have has not yet set the alarm for at least several days. Especially not for the moment, 06:45. When I check all the alarms to see whoever it might be, I see clearly that there is no alarm, when disabled, set to 06:45. It's really disturbing. Is anything else on that?

  I'm really disappointed in apple products lately. Even about this, not responsive mobile web site where I am writing this question.

  Hi vmvmvm,

  Welcome to the communities of Apple Support!

  We understand that your iPhone has sounded the alarm on a couple of occasions that you have never configured in the clock application. Because you have only noticed this problem since updating to iOS on iPhone, we perform an insulation here step to try to find out why this is happening.

  We want to reinstall you iOS on your iPhone. This should not affect any of your data, but it is always advisable to make sure that you have a current backup in iTunes or iCloud. Backup your iPhone, iPad and iPod touch - Apple Support

  Once you have a current backup, follow the steps in the section "If your device turns on but hangs during startup" in this article: If your iPhone, iPad or iPod touch won't turn on - Apple Support

  These steps will reinstall iOS. Keep in mind that these steps were written for a different issue, but they will always help us to further isolate the situation. Test your iPhone as usual once the relocation over and let us know if the problem persists.

  See you soon!

• Alarm brings more sound after updating iOS 10

  The alarm makes more no noise. I updated my phone a few days ago and initially, it worked, but now when the alarm "goes off" there is no sound. The volume is on and more strong, the phone rings when someone calls and other notifications make noise, but not alarm. Even when you choose a different alarm, no sound (usually, you hear a sample of the alarm). That I am I doing wrong or what happened?

  Same problem, restart a phone help but only for a few days...

• The alarm is not since the update of ios10

  Since I updated my iphone 6 to iOS 10.2, that the alarm goes off, but he is without his help please

  Try these general steps. They could help.

  1 reset your iPhone by pressing and holding the sleep/wake and home buttons.

  2 disconnect you from your iCloud account and reconnect again.

• I get no picture on the TV when using mini ipad with the Digital AV adapter.

  I get a white on my TV screen when I connect my mini ipad digital AV adapter except HDMI 1 showing in the upper left corner of the TV screen. My mini2 ipad works great with the same son and TV.  I tried two ipads with different TV but get the same result. The ipad mini works OK if not connected to the TV. Two minis are working on the same operating system setting.

  The Digital AV adapter can be finnicky.

  Have you tried simply unplug and plug the adapter with the HDMI cable connected with it?

  With the adapter always plugged into your iPad, have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to the dark and restarts with the Apple logo, then release them buttons?

  Good luck!

• Alarm not to play a few songs in iOS 10

  Hello

  I have a weird problem in the latest version of iOS 10 (on an iPad) where I select a certain song of the stock clocks app to play as an alarm, but it defaults the sound "radar." This does not happen with all the songs, but it comes up with a few constantly. Does anyone else know this and all solutions? Thanks for your help!

  Hello dwr130,

  Thank you for using communities of Apple Support.

  I see that after installing iOS 10 on your iPad, when you select a certain song to clock app to use it as a default alarm sound of the radar. This is not the case with all the songs, but it comes up with a few very regularly. I can understand wanting to use many songs for your alarms, I have this on my iPhone.

  It seems that the clock app is not responding as it should. I suggest go ahead and force close the clock application, then set a new alarm, and retest with these same songs. The following article will help you: force a nearby application on your iPhone, iPad or iPod touch

  Let us know how it goes.

  Have a great day!