Digital satellite P200 (PSPBGA) - footprints and the webcam will not work on Windows 7

Similar Questions

• USB ports of my son and the webcam will not work. We get "driver webcam open fail." "Please restart camera or computer" and 19 code for USB

  In the Device Manager say USB controllers ' Windows cannot start this hardware because its information for configuration (in the registry) is incomplete or damaged (Code 19).»  We have already deleted the drivers and rebooted (did not work) and tried a restore from the registry, but there was nothing old enough to return to. Now what?

  Hello

  There could be a hardware problem that just happened to come while he was on the system.

  Disable Legacy Support just in case he has a problem - don't forget to put back so no joy. Look to see
  If there is another USB settings and check with system manufacturers.

  Maybe an upgrade InPlace or even a reinstall of Windows would be useful.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Don't forget to do a good backup, or three if you
  keep the data.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  --------------------------------------------------------------------------

  Several options below.

  You mean reinstall the OS completely? If you have Vista DVD you can do however make sure to
  totally your data off the drive of backup, and you need to reinstall your programs. If you do not
  Disks of Vista, you can buy them in your machine to cheap system. If you don't care about existing programs
  Then you can make a complete new installation - just select the format options that erases the entire disc (this
  Clears all data as well).

  How to perform a repair for Vista Installation (this keeps your data if the backup off the)
  Player is safe)
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  How to do a Custom Installation of Vista - this is a clean install should, however, save your data
  http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

  Upgrade to another edition of Windows Vista - this should keep the programs and data
  http://windowshelp.Microsoft.com/Windows/en-us/help/3af7e05f-4d2a-4af7-A168-9242f9093bb81033.mspx

  Installation and reinstallation of Windows (upgrade - store programs and data or New Installation that removes them)
  http://windowshelp.Microsoft.com/Windows/en-us/help/e77344fa-e978-464c-953e-eba44f0522671033.mspx

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• When I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.

  My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted.  Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.  When I close the program Roxio the resolution of the screen reverts back to 256 colors.  Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.

  Original title: programs Application Applications compatibility

  Hello

  You can install the program in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the status.

• After 10 Windows Installer on Audio SW5-11-18R3 and the camera will not work. How can I fix?

  Tried the upgrade of Windows 10 initially, but it failed with "lack of disk space", then installed full media and all but the Audio and the camera does not work.

  Hi all

  I would just like to make the point that there is a fix that has been made available and applications for a Windows Update is also underway. I'll link directly to the file located on our page drivers and downloads.

  
  
  
  
  
  
  
  
  
  
  
  
  

  Patch

  Acer

  1. fix camera function fail after upgrade to Win10 TH2.

  20160506

  91.7 MB

  30/05/2016

  Download

  Thank you
  Cory

• Spent 680 GTX to the 770, now MPE is disabled and the recording will not work in CS6.

  I recently had to return an EVGA GeForce 680 via RMA failure, and as EVGA was more than 680's in stock they sent me a 770 instead.

  I installed the card and reinstalled the latest drivers, and I got this error message when you open a project (CS6):

  "This project has been modified used with Mercury Playback Engine GPU Acceleration (CUDA), which is not available on this system.  Mercury Playback Engine Software only will be used"

  I also get the following error message when you try to encode: "recorder captured No. Frames"

  I have so I uninstalled and reinstalled everything using this sequence:

  -Uninstall the wipes and utilities Matrox

  -Uninstall Adobe CS6

  -Run Abobe vacuum tool

  -NVidia drivers run Setup (ver. 337.88), making sure to check 'Perform Clean Install' (I installed only graphics and HD audio drivers. No 3D Vision, physx and GeForce experience)

  -Install Adobe CS6

  -Update Adobe CS6

  -Install the Matrox utilities

  -Restart the PC and the power of Matrox cycle

  -Install the Matrox models

  The Matrox I use is THE MX02 w/MAX (version 7.6.0.1993)

  Windows 7, Adobe CS6

  After re-installation, I still get the same error messages.

  Can someone please offer assistance so that I can get back to editing?  Thank you!

  The 680 was on the list of "Supported", the 770 apparently not. No worries. It works, they just never specifically tested and they do not want to engage in something that they haven't tested.

  Just delete the file named cuda_supported_cards.txt and the problem will disappear.

  Regarding your Matrox stuff, I have no idea. I'm sorry.

• Satellite M70 - 170 - Touch and the launch does not work

  Hello everyone, I'm Sylvain and I'm french, so sorry for my English...

  I have a Toshiba Satellite M70-170, and I have a problem with the program "Hit and run" (1,2,9,0)

  I see the icon then the clock and I can change the settings, but when I press the button of the mouse will work, but not to the touch and launch...

  Can you explain why?

  I love this commercial and I want to know why it does not work.

  I put t know why the touch & launch does not work, but I would try to reinstall again.
  The Touch & launch is placed on the European driver Toshiba page.
  This time it s a v 1.2.9.0 for Win XP.

  Uninstall first touch & launch and after restarting again install it again!

• my cd-rom and the webcam does not work

  For awhile, my CD player has not worked. I get the same response when I try to trouble shoot, the disk is damaged or missing. And just recently I realized that I can't access my web cam. I use a xhooua Pavilion #aba

  Sorry to post the solution a bit late.  Please follow the steps mentioned in the link below.

  For CD/DVD drive problems

  http://support.HP.com/us-en/document/c01897812

  For Web cam issues

  http://support.HP.com/us-en/document/c02452221

  After the update of the solution provided for further assistance.

• Try a link on a page and the link will not work unless I have disable addons and go in safe mode

  When I connect to a site, there is a tab that I can click on which should take me my FB login. There is no nothing, when I click it, unless I have disable my addons and go to safe mode. I tried to disable addons one by one, but nothing has worked. I can't understand what is causing the problem. I also refreshed my FF from scratch once again and the problem still persists. It's the address I want to... www.Slotomania.com and I try clicking on the blue facebook button in the center of the page. This event started about 5 days ago and I am at my wits end trying to figure out. Can you help me please. Thank you =)
  PS... I didn't add the addons in a time long dang and everything works perfectly.

  Given that you use the private browsing - automatic mode

  Important change preferences
  
  ...
  
  Browser.privatebrowsing.AutoStart: true

  -This may well be caused by the new Tracking protection feature in private windows in Firefox 42.

  When anti-suivi is enabled, a new shield icon should appear on the left end of the address bar. You can use this icon to make a temporary exception to the site. Or you can disable the feature of anti-tracking as a test.

  This article contains more information on where to find this setting in the Options page for private windows: Tracking in private browsing Protection.

• Tecra A10 - pad touch and the keys do not work on Windows 7 x 64

  We have recently done a new install of Windows 7 x 64 on a Toshiba Tecra A10.
  The operating system has taken over most of the drivers, we had to install drivers for the card reader ourselves.

  Our problem is that the touchpad and the buttons work at all.
  The driver displayed in devices such as manager being installed, but that's all. I even installed the control panel of the Alps (Vista x 64) which works very well.
  Have tried the settings "stick and touchpad are automatically invalidated" when you use an external USB mouse, all to nothing done.

  The equipment worked perfectly okay with Windows 7 32 bit installed.

  Is there a fix here?

  Hello

  Maybe it of just a driver issue, I checked the downloads available for Tecra A10 on page of Toshiba and Windows 7 32 bit there is a newer driver available for Windows 7 64 bits do not (no driver). If you use the Vista 64 bit driver

  What you can do is to test the driver for the touchpad for Tecra A11. There is a version more recent for Windows 7 64 bit of Alps Electric so correct. Touchpad driver is not linked so I sure it will also work on your model of m.

  Take a look at the Web of Toshiba Tecra A11 driver site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Brother printer and the scanner does not work after Windows Update.

  Separated from this thread.

  I have the same problem with my Brother ADS2000 scanner and my multi MFCJ4710.  I can print with the MFC, but the Control Center detects or scanners.  They worked and suddenly stopped.  I wonder if Windows update changed something?  Scanners both work with Windows Fax and Scan, but not Brother Control Center 4.  I called support of brother and again, they have said something about TWAIN and I have to do some registry clean.  I tried their manual steps, they sent with the registry fixes and which totally screwed up on my computer.  I had to do a restore and now back to square one.

  Any solution out there?

  It was my dose,

  (1) start search box type menu "user accounts".

  (2) open and select "user account control settings."

  (3) to change the cursor to "never notify".

  (4) 'ok' to save

  (5) fact! You may need to restart you machine.

  PS: this was my fix, it was caused by software AVG anti-virus, AVG has replaced this setting and would fail to wireless for my scanner. It will be useful.

  Rob

• Mouse Microsoft Wireless Comfort Keyboard 4000 and 5000 laser will not work with Windows 7. Is there a fix for this problem?

  I recently bought a new computer with Windows 7 installed and much to my dismay found my Microsoft Wireless Comfort Keyboard 4000 and Wireless Laser Mouse 5000 are not compatible with Windows 7.  If no fix that means I have to start avery good keyboard and mouse I used comfortable for a long time.

  When you try to load from the disk, the message informed me that it was not compatible and use the automated system to find a fix has not produced an answer.  My keyboard and mouse are in great shape and it is not necessary for me to replace it with a new one from a material point of view.

  The drivers for both devices on the drive that you are probably older versions, you should be able to download the latest drivers for Windows 7 in the pages below, you will need to choose which version of Windows 7, you are running, that is, 32-bit or 64-bit.

  Wireless comfort keyboard
   http://www.Microsoft.com/hardware/en-us/d/wireless-comfort-keyboard

  Wireless Laser Mouse 5000
   http://www.Microsoft.com/hardware/en-us/d/wireless-laser-mouse-5000

  If the above is not your exact devices check for them on the next page:

  Microsoft Hardware downloads
   http://www.Microsoft.com/hardware/en-us/downloads

  Kind regards

• Satellite M30-604 freezes and the fan does not work after replacing

  Satellite SM30-604. Laptop has left the mat from one day to the next and overheated! Fan won't spin and laptop start only occasionally. Thinking that the fan was fault I replaced the fan but even this new fan doesn't spin. The heat sink is totally clean - dust free inside the fins at all. The laptop is only 2 years.

  Cooling using forced (by sticking a nozzle of aspiration to the output of the cooling fan!) the laptop starts sometimes as normal until the desktop screen with all of the usual icons and no error message. But then, it does not further - the freezing of the screen, keyboard and mouse.

  Most of the time it does not start at all. When it does not start, the blue LED lights up but there is no hard disk activity or LCD at all - even the wifi LED lights even.

  Really grateful if someone knows what's going on. You are not sure if it is the main processor that is defective?

  Thanks in advance.

  Charlie

  Hello, Charlie

  As you know on this path is not easy to give an accurate diagnosis, but according to your assignment, I guess there is a complex problem and unit must be properly verified. I also think that there must be a problem with the electronics.

  It is really possible that the motherboard needs to be replaced but, as I already said, it is not possible to say something specific about your problem. Try contacting Asp and you will see what they say.

  Good bye

• Cannot adjust the brightness of the screen and the sleep will not work Satellite P750/P755

  On my P750/P755 Satellite I am unable to adjust the brightness of the screen.
  I can move the scale but nothing is happening on the screen.

  Also in the last two days not possible in mode "sleep" as it did before, even though I haven't changed anything.

  What did you do with your computer laptop last days?
  On this virtual path, it is not possible to say what the problem is here.
  You have installed updates? I mean all this can happen without reason?

  Have you tried to roll back the OS to an earlier time to check the functionality?
  And Yes, do you use the original pre-installed OS that you got with your laptop?

• Automatic play button and the game will not work for videos

  I'm reading a video (the Web site supports .webm, .ogv, mp4), but neither autoplay, or the Start button seems to work. However, if I slide the button to the right (+/-40 sec) play video.

  I tried a lot of solutions suggested in other threads (potential disabling conflicting plugins, reset Firefox, etc.) but none of them work.

  What Miss me?

  The problem has an easy solution: changing the order of the videos, first list the source .mp4 and according to the source made .webm video running under Firefox, explore and Chrome.

  Does anyone know why?

• PS CC update failed and the application will not work

  I'm on a mac (mavericks, updated)

  iMac late 2013

  CC update starts downloading but stop at level 55-60% with error update failed.

  I really don't care about the new features and tried to use the existing application... no joy at all... nothing... my worst fears about this idea of stupid auto update subscription are are produced.

  Adobe chat is saved llike mad...

  Anyone know how to restart the application on a mac?

  Thank you

  Tom

  Jeff-

  After a short wait, I finally received a phone call from an adobe call center and resolved the issue. It took almost 2 hours on the phone.

  The final resolution was uninstall and use the tool cleaning of adobe to remove all traces of the original install PS, then reinstall the application.

  Not enough, but back up running.

  Thanks for your comments.

  See you soon,.

  Tom