digital video camera is being recognized in windows xp and windows 7 or a fact now

Hello world. I hope someone can help me please. I have two computers windows xp professional 32-bit and the other is windows 7, both were working fine until yesterday. My problem is that I can edit software.and they both were captuering fine.and computers just stopped at the captureing even time. It really seems I spend most my time troubleshooting. I just want to enjoy what i ' am doing instead of hating what I like to do. I firewire1394 0n computers. Also, I plug this into a canopus converter box. And he remains in analog mode instead of going digital in. I also have the red yellow white wires that go to the converter for the camera.and of course the small hooks to the converter firewire and 6-pin computer.everything was basically works fine and when windows computer with xp does what I then spent to the windows computer 7 and it's the same thing. I ALSO have the regserve and driver boost software I ran two of them and retried. Please someone that skills tech really good please help. And also is their some software I can get that will keep this where I can capture. Also, I forgot to mention the digital video camera that I use are twice are is oone of mini dv jvc model GR-D71U and the other is GR-DVL815U. If I had the money I would not pay mine. But we have very rough now my wife has lost his job 18 months ago and I am disabled. Please ANY HELP WOULD REALLY BE APPRECIATED. If you have any questions do not hesitate to send * address email is removed from the privacy *

Hello

 
You can try to uninstall and reinstall the drivers the most recent and supported applications for your webcam from the manufacturer's Web site and check if it helps.
 

You can also contact your support site for video camera (JVC customer support) and check for any related technical assistance.

Tags: Windows

Similar Questions

  • How to transfer video from Panasonic NV-GS180 miniDV digital video camera

    Connection of the MiniDV camera to windows vista

    I have a Panasonic NV-GS180 miniDV digital video camera. My computer has windows vista operating system. Recently, I decided to transfer the videos, I took, from tape (miniDV) on my computer. I have found that editing software supplied with the camera (motionDV studio THE 5.3e) cannot be installed to vista OS. I read on a forum that I can use windows Movie Maker to do that, but neither with the with the IEEE 1394 the computer cable usb cable had connection with the camera. How can I solve it?

    I have a Panasonic NV-GS180 miniDV digital video camera. My computer has windows vista operating system. Recently, I decided to transfer the videos, I took, from tape (miniDV) on my computer. I have found that editing software supplied with the camera (motionDV studio THE 5.3e) cannot be installed to vista OS. I read on a forum that I can use windows Movie Maker to do that, but neither with the with the IEEE 1394 the computer cable usb cable had connection with the camera. How can I solve it?

    =========================================
    Download via your connection FireWire (IEEE-1394) would be the
    best bet.

    Maybe the following articles offer something that you haven't tried:

    Windows Vista-
    Import video from a videotape
    http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

    Import video in Windows Vista
    http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

    Windows Vista - importing video from a video camera high definition (HDV)
    http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-high-definition-video-HDV-camera

    Windows Vista-
    Troubleshoot importing video problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

    Download video from your camera to your computer
    http://www.Microsoft.com/windowsxp/using/MovieMaker/getstarted/DLmovies.mspx

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Re: Satellite L - how do I connect my digital video camera?

    I have a Canon digital video camera (purchased in 2004). I used it to transfer movies on my other laptop Toshiba, but there is no place to plug in on my new laptop. I used an iEEE1394, but it does not work on this one.
    What alternative is there?

    On start-up the laptop I get a message saying NO TOSHIBA SERVICE STATION WORK and proceeds to solve, but nothing happens.

    Any suggestions pls.

    Hey,.

    What model of laptop you have exactly? Some computers laptops don t have firewire port, but if your camera has a USB port can use this port. AFAIK all laptops have USB port

    > Also on start-up the laptop I get a message saying NO TOSHIBA SERVICE STATION WORK and proceeds to solve it, but nothing happens.
    You should try to reinstall the Service Station, I think it should work. Just download the latest version of Toshiba service station on the official website of Toshiba and install it:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    But don t forget to first remove the old version before installing the newer one. ;)

  • Cannot connect digital video camera

    Hello

    I tried in vain for hours connect a digital video camera to my Vista computer. I tried the camera on other computers and cannot connect to them either. It's a Sony Handycam and I used 4 Pin/4 Pin firewire cable 4 pin/6 pin. I also tried a USB cable. I'm running the camera in the game while restarting the computer, I tried to turn the camera on or off when you are connected to the count. I checked the settings of the camera and they all look great. I don't think that the problem is with the camera because I downloaded the video in addition to him in the past, but only once. Is there a chance that a Vista update caused vista to no longer recognize my camera?

    Thank you

    Russ

    Hi GraceRuss,

    It is unlikely that an update is the problem with the camera because the camera does not work on any machine. Looks like that there is a problem with the camera or a problem in the connection. You must consult the instruction manual provided with your product first and then consult with the support of sony. Thank you, Jeremy M - Support Engineer

  • Problem with the camera as being incompatible with Windows 7 driver

    Hi all
    I have a problem with my Logitech camera - Logitech QuickCam communicate, actually.  Just don't/do not upgrade to Windows 7 in 64-bit mode.
    Any suggestions on how to fix? I'm a little bit ticked off without going through the camera work

    Logitech has not published nay drivers for windows 7.

    http://Logitech-en-AMR.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/std_adp.php?p_faqid=13985

    Logitech has released software updates for many of their devices.  Communicate Deluxe, Communicate STX and communicate the MP are listed as being supported in Windows 7.  Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

  • Download from a digital video camera on ipad

    I have a Sony DCR-PC5E with Ctrl - L (LANC), IEEE 1394 (FireWire/I.Link), output S-Video, and composite outputs video/audio.

    Is it possible to download my videos on my iPad?  And what connectors and software do I need?

    If your recorder video/camera has USB ports as well as FireWire ports, you can try to download the film via USB using this adaptation set.

    http://www.Apple.com/shop/product/MC531AM/A/Apple-iPad-camera-connection-kit?fno = 91

    Not sure if it will work video or not.

  • Why has my tv tuner stopped being recognized by windows vista

    Why my tv tuner ceased to be recognized by windows vista, repeat me driver but I can not get a drive to be well

    Hello

    1. have you made changes on the computer before this problem?

    2. What is the number of brand and model of the TV tuner card?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    If Device Manager check the TV tuner card is detected no.

    Get help with Device Manager errors:

    http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

    Method 2:

    Try the steps in the following Microsoft article and check if it helps.

    Error message that you receive after you configure Windows Media Center without connecting to the Internet: "No Tuner available": http://support.Microsoft.com/kb/929453

    Hope the information is useful.

  • My FE - 370 camera is not recognized in Windows.

    FE - 370 camera

    I don't have a disc with my camera. When I plug it to the computer, the screen of the device lights up, there is a noise of 'knocking' of the computer, I press OK. the display shows "wait a moment" - and nothing happens! Help!

    I don't have a disc with my camera. When I plug it to the computer, the screen of the device lights up, there is a noise of 'knocking' of the computer, I press OK. the display shows "wait a moment" - and nothing happens! Help!

    So, in fact, you have a digital camera Olympus FE-370?

    It is not * really * compatible (Olympus can't in fact) under Windows 7.

    It has a removable memory though - I suggest that you get a compatible drive and simply start to remove the card and use it as an external drive when you want pictures.

  • attempt to import my video camera using IEEE 1394, but windows import doesn't appear?

    I have a hp dv6000 with windows vista home basic 64.  He used to work, but have been seen computer issued and re-stored at the factory and I did all of my updates since then. I hear the click when I connect but nothing comes.

    Thank you!
    Silvia

    The following links may be worth a visit:

    Windows Vista - import video from a videotape
    http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

    Import video in Windows Vista
    http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

    You may need to adjust the automatic run settings:

    Windows Vista - How to change the auto run settings
    http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

    Windows Vista - AutoPlay: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

    Windows Vista - Troubleshoot AutoPlay
    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  • I have a videocard of nvidia titan once a cc 2014 upgrade my video card is not recognized in the creation and also davinci resolve mercury reading is not available

    Please help me solve this problem, I tried everything what gpu is not seen by any program, all drivers are up-to-date

    I had to re install windows only way worked

  • Problems with importing video camera mini dv JVC

    I turn on my camera and put it on the playback mode. I have IE 1394 plug in my port on the camera and the pc. I open windows dev and click Import from digital video camera. A noise of error made. A message appears "import video is already launched and running on this computer. You cannot start another instance of import video until the first instance has stopped. To correct this issure, wait for the video to be import, close import video, wait a second w fe then start import video. »
    I'm doing this, but I know that I do not have started to import anything. I can sit there all day and wait and try again and again and the same message appears. I also tried to restart the pc and start the process again. Same thing is happening. I tried on my friends laptop same thing occurs. I recorded it before on a destop with another type of fire wire but my laptop cannot use the 1394 cable.

    I turn on my camera and put it on the playback mode. I have IE 1394 plug in my port on the camera and the pc. I open windows dev and click Import from digital video camera. A noise of error made. A message appears "import video is already launched and running on this computer. You cannot start another instance of import video until the first instance has stopped. To correct this issure, wait for the video to be import, close import video, wait a second w fe then start import video. »
    I'm doing this, but I know that I do not have started to import anything. I can sit there all day and wait and try again and again and the same message appears. I also tried to restart the pc and start the process again. Same thing is happening. I tried on my friends laptop same thing occurs. I recorded it before on a destop with another type of fire wire but my laptop cannot use the 1394 cable.

    ==========================================
    Maybe the following will help:

    Windows Vista-
    Import video from a videotape
    http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

    Import video in Windows Vista
    http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

    Download video from your camera to your computer
    http://www.Microsoft.com/windowsxp/using/MovieMaker/getstarted/DLmovies.mspx

     
    Windows Vista-
    Importing files into Windows Movie
    Manufacturer: Frequently asked questions

    John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Satellite A300 - Cd/Dvd drive is not recognized by Windows

    My cd/dvd drive has stopped being recognized by windows (7). I don't know what has caused this because he previously worked and allowed me to install office 2010.
    There seems to be no restore point shown around where he was working.

    Check the Device Manager please.
    Optical disc correctly listed or may be listed as unknown device drive?

  • Webcam not recognized in Windows XP with VMware Fusion

    I use VMware Fusion 2.0 on a Macbook Pro with Windows XP.  I've been using Yahoo Messenger with the iSight webcam and I think I accidently deleted the icon at the bottom of the VMware window and now the web cam is not recognized in Windows at all.  The iSight camera works just fine under MacOS, but I can't find how to do Windows or VMware recognizes the camera.  I guess I could reinstall VMware and it might solve the problem but I'm looking for an easier route when it exists. Someone at - it a similar problem?

    Thank you

    Dennis

    Have you checked the settings of your virtual machine to see if the isight is activated must be forwarded to the VM?  You might consider checking or setting these options under usb.  Also if you have version 2.0 only then you can consider update 2.0.5 before reinstalling VMware.

  • After I updated my mini iPad to IOS 10 my video camera won't let me take videos

    I've recently updated to IOS 10 but I figured out after I updated my iPad mini, my video camera was not working properly. It doesn't let me take videos. They came out blurry. Please tell me how to fix it!

    < re-titled by host >

    your video camera a physical device where you save and import in the ios device or are you talking about the video app on the ios device?

  • Error when you try to view videos of the Kodak Easyshare touch camera: the selected file has an extension (.) (THM) which is not recognized by Windows Media player.

    Camera video will not play on the computer

    I recently bought a Kodak EasyShare touch camera.  Love it, but for some reason some will not play videos from the camera to my computer.  He will say: the selected file has an extension (.) (THM) it is not recognized by Windows Media player.  Any suggestions?

    . THM is a thumbnail of the file... not a video file. I suspect that your
    Kodak records in the. MOV or possibly. Film MP4 format.

Maybe you are looking for