Dimension 3000 starts then dies

Similar Questions

• Satellite M45-S265 trying to start then dies

  I have a M45-S265 and when I turn it on the light (market), fan turns then it just dies. I tried taking the battery and it worked once then froze. Kept by train over a period of one week, same result, came back after a week, with the battery and it started and then frozen again.

  I don't know if this could a defective switch or what! The fact that it froze on the two occasions he actually started confused me!

  Hello

  Hmm. First check if you AC adapter is ok and if it s properly connected to the laptop. You must make sure that AC adapter provides power to the laptop.

  As a next step, you should check if it s not a software problem. In this case, you should try to boot from the recovery disc.
  If it of not possible to reinstall the OS using this disc, then a hardware problem might be possible.

  In this case the RAM modules should be checked. Perhaps one of the modules or the two RAM modules are defective and so the laptop does not work as it should.

  Last but not least if you don t have enough resources to perform this laptop computer test then you should contact a technician for laptop.

• Dell Dimension 3000 mysterious starts.

  I have a Dell Dimension 3000 running Windows XP Home Edition. He suddenly began to automatically start shortly after midnight each day.

  Hi ColinArmstrong,

  Thanks for posting in the Microsoft Community forum. I'm sorry to hear that the computer automatically restarts during the night mi.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

   

  1. don't organize you all tasks restart the computer?

  2 has there been recent changes made on the computer before the show?

  3. is the computer is off or did you put the computer to sleep before it restarts itself?

   

  I suggest to check the Task Scheduler and make sure that you don't have something on demand for all night that making your restart the computer.

  You can find the Task Scheduler by clicking the Start button, click on the Control Panel, clicking system and security, clicking Administrative Tools, and then double-click Task Scheduler.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

  Original title: Journal of spooler

  I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps.     a. Click Start, right click on my computer and select manage.  b. in the console that opens, expand the menu Services and applications.  c. click Services.  d. click the button twice to spool print.  e. in the 'Général' tab, go to Startup Type.  f. the Automatic value.  g. click on the Start button.  h. click on apply and Ok.     Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service.      Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:

  Hello

  1. don't you make changes on the computer before this problem?
  2. when exactly you get this error message?

  Step 1: Run the fix it tool using the article below and check out them.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Try the steps from the article below and check out them.

  Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
  http://support.Microsoft.com/kb/915168/en-GB

• Can dimension 3000, I start the CD RW?

  I have 2 optical, cd/dvd drives and cd-rw but dvd player is broken, will not open. Can I use the cd RW? BIOS lists only the floppy, DVD and HDD. I tried tapping f12 when restarting with dell os disk into the cd rw drive, but she starts just xp hard drive.

  It's the old pc I want to format, reinstall xp and puppy linux.

  I've never done something like this before.  I hope that someohe can help!

  You seem to have done the settings are correct, but the player does not seem to read your boot drive.  To try again, set the second master back to enabled, set the secondary slave off and physically move the connector at the end of the Ribbon to the broken car to the player who works.  Sometimes they have a failed drive on the IDE data cable prevents a good drive to work, so the only thing to do is to remove the bad drive.

  Your problem may also have something to do with the disc you are trying to use.  Some CD/DVD players have trouble switching between the two formats when used to start the computer.  Also, remember that if the CD player is only he will not see anything on a DVD.  Windows XP Setup floppies are almost always a CD, but I seem to remember that the Media Center disc was a DVD.

  I've never owned a Dimension 3000, but the Dimension 2400, which is roughly the same age could certainly start from a provided USB memory stick had the correct startup information.

  EDIT: Went back and just reread your post and I see that I have mistakenly believed you had turned off the second master.  The primary master is your hard drive, that won't turn off!

• I have a Dell Dimension 3000, service Pack3 & I would like to know how to reinstall the operating system xp professional?

  I have a Dell Dimension 3000, service Pack3 & I would like to know how to reinstall the operating system xp professional.

  Thank you

  Dee

  Check maual of the user of the ignition key (e.g. F11) you need to press on when you first ask the computer to access the XP restore partition. If you have a "restore CD" the game that the BIOS so that the CD-ROM drive is the 1st device to start, followed by the hard drive. then power on the computer and "press any key" when prompted to start the installation.

  J W Stuart: http://www.pagestart.com

• Cannot delete the printer in Dell dimension 3000 XP Home Edition 32 bit race.

  Original title: have dell dimension 3000 with xp home 32-bit edition.

  have 3 old printers in Control Panel I can't remove... mike

  Hello

  1. what happens when you try to delete the printers?

  2. do you get an error message?

  3 are logged as administrator?

  I suggest you to start the computer in safe mode , and then try to delete the printers.

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Hope this helps and let us know if you need more assistance.

• boot from the flash drive on a dimension 3000

  XPSP3, completely up to date, 3000 dell dimension

  I have booted from the flash drive once a long time ago and I have still now because my cd player is not good according to imgburn and dell did not buy, I looked. :)

  The only question about it in my search for this forum was 10 years ago, and the op had no satisfaction.

  I took action: drive startup laptop computer (dell), so that's good, will load files on the 3000 and then reach the point Windows starts up, and then I get a blue screen 07 b, any file in the list, just telling me to uninstall a driver or a controller, I have not installed one, :)

  any ideas?

  INSTALL full XP on USB flash as boot drive is not supported.

  Hirens is WINPE no full XP.  XP is not and is not supported as a boot USB and run all option.

  You need to do a real hard drive your boot drive.

• How to upgrade the virtual memory on my Dell Dimension 3000 running XP, now that I've upgraded to 2 GB RAM

  OK Hi everybody I have a Dell Dimension 3000 desktop pc / and I am running windows xp. in any case, I use to have 512 MB of ram but now I updated and I have 2 GB of ram. But before I updated I had in my performance, then the virtual memory settings and my custom settings it what should I change them for now to get me 2 GB of faster ram PLS HELP!
  * original title - PLS help me with my ram! *

  Set virtual memory to "System Managed size".

• Dimension 3000 to Windows 7. Need driver onboard video

  I've just updated my Dell Dimension 3000 desktop computer to Windows 7. After installation, window Device Manager indicates that the video controller device needs the driver upgrade. I tried to download the driver from the Dell support Web site, but Windows does not recognize it. Someone there has the same problem? Dell just introduced any driver that works with Windows 7?
  Thank you

  You don't need a new video card, I just did after a Win7 update and it worked fine with the native video.  I can now go up to 1920 x 1200.

  The process of

  1. Download the driver located here. It's the Intel 82865 G Graphics Controller driver.
  2. When prompted, save the file to C:\dell\drivers\R106458.
  3. If you try to run the setup.exe file, you will receive an error message. It's okay (for now).
  4. Find the setup.exe file in the C:\dell\drivers\R106458 folder.
  5. Right-click on this file and select "Properties".
  6. Click on the "compatibility" tab and change the settings for "XP" (service pack 3)
  7. Now, go back to the file setup.exe in the C:\dell\drivers\R106458 folder and configuration file should work normally.
  8. When you are prompted, restart your computer.
  9. Go at the start > Control Panel > appearance and personalization > adjust the resolution of the screen.

  You should now be able to adjust the resolution of your screen freely. This technique, although that not tested, could also run on older versions of Dell Dimension who encounter the same problem. I hope this helps someone else out there.

  Accessories for this guy, Dave Panfili, is info on his page, I just found on the net.  FYI, I also changed the properties to "run as administrator" just to be safe.

  www.davalign.com/.../Fix-Dell-Dimension-3000-Screen-resolution-after-Windows-7-Upgrade

• Video dimension 3000 - driver compatibility with Windows 7 -

  Hello

  I see that it is NOT possible to change the resolution of my screen using the 'video Graphics Chip 865 Gr accelerated VGA' driver, since I installed Windows 7 on my desktop Dell Dimension 3000

  I have a very low reolution now and I can NOT change to a higher resolution.

  What can I do?

  Best thanks,

  JLD

  You can try to install the Windows XP video drivers.

  Download and run the Setup program so that they extract to C:\Dell\Drivers

  Select your video equipment (obtained an audio device here for example) that doesn't have a driver, note that it may have a yellow? and just be in a different place, if windows does not know its for video. Can say video credits.

  

  Right click on the device and select Update driver software.

  

  Browse your computer for the driver software

  

  Type C:\Dell\Drivers\R106458, and then press Next. Repeat for C:\Dell\Drivers\R96001

• How to disable integrated on the Dimension 3000 video?

  I'll install a videocard ATI Radeon HD 2400 PCI in Dimension 3000 my son.  I will also be upgrading the RAM of the system with

  2 GB (2 x 1 GB) DDR 400 (PC 3200).   How can I disable the video integrated on this system?  In addition, any "lessons learned" to do any update on this system would be greatly appreciated.                 Thank you, Jack

  There is no way to disable the built-in manually video material.  The BIOS has two parameters of the video card; Auto and on board.  The last forces the use of the integrated video, the first is supposed to allow the BIOS to switch automatically to a PCI graphics card.

  The first thing to do is to restart the computer, use F2 to the Dell screen to go to the configuration and verify that the BIOS is set to automatic in the video menu.  Allow the computer start and go into the Device Manager.  Find the Intel graphic card in the display section of maps, right-click to bring up its properties.  Go to the menu "Use" at the bottom and select "don't not use this device - disable.  Restart the computer to verify that you are now a standard low resolution (640 X 480) VGA screen.  This action forces the loading of the VGA driver so that when you install the actual card, you will be able to get a display.  Turn the machine off and disconnect all install them the card.  Remove all external devices except the keyboard and mouse.  The cable of the port monitor built into the port on the new video card.  Power supply and start the computer.

  Let the computer finish starting.  You should be able to see the VGA display, as you did when the monitor is always connected to the onboard video port.  If you do not, something is not right.  Do not try to load the driver for the card, unless you can get a VGA display on it.  First thing to try if you see nothing is to pass the card in another PCI slot.  If that does not do it, remove the power of the computer and reset the NVRAM by removing the cell of the backup of the main card for about a minute.  Replace the cell, connect the power supply and start the computer.  If you still don't see the VGA screen, you should try another card.  Some of the older Dells did not get along with ATI cards.

  If you see the VGA screen, put the diskette of drivers for the video card in your CD ROM drive and install the driver.  I guess the drive of ATI's NET software framework on it; This software is necessary before you can install the driver.  I hope that your installation manual includes the details.

• BlackBerry Smartphones Blackberry curve 8520 white goin guard then dies?

  Suddenly, my bb 8520 curve goes white then dies even if he is charged at 100%? I got new battery but still does it? So, it may be the battery?

  Hello and welcome to the community!

  I recommend that you try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

  If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck and let us know!

• DVD burner (Pioneer) upgrade Dimension 3000 causing problem ~ can anyone help?

  Ok

  I have a Dimension 3000.

  The two discs were going on me, so I bought two new.

  I installed the two made sure the riders were that they were supposed to be

  the dvd drive installed fine. The problem is that I installed the burner.

  It's a Pioneer DVR - 115D installed as secondary

  The pc shows, but the green light on the front of the burner continues to blink as if it were held (two times then pause) continuously.

  The tray has a mind of its own, whenever I restart my pc it opens.

  I called pioneer & the guy said that my motherboard BIOS needs to be updated, if that's what I did, updated AO1 to AO3 I think it was then I get this blue screen that says «machine check exception»

  Green led blinks always & it won't play anything. It shows that it is installed.

  I update my firmware too for this burner of 1.13 to 1.18.

  So I do not know where to go from here. If someone could help that would be great.

  Thank you ~.

  
  

• Replacement of a card mother Dell Dimension 3000 with a Dimension 4600 motherboard

  Recently I replaced my processor in my Dell Dimension 3000, however, at the start he always tells me that the processer is not supported by the Bios, so I still have to press F1 to start upward. I heard you can counter this is replacing the Board with a Board of a Dimension 4600 however, I know not what condition the Board of Directors must be in. Can I replace it with a Board of direct administration of a Dimension 4600 or what I need to get a referbished or the new Board of Directors?

  scprokop

  A work of a Dimension 4600 motherboard can be used, provided it is in a usable state.

  As the Dimension 4600 is obsolete for many years, I doubt there is very no new motherboards available, only the so-called "renovated" boards, which are 'pull system '.

  Bev.