Dimension 4500 unable to format sister 160

Similar Questions

• Portege R100: 4GB SD card works very slowly-> unable to format

  Laptop works fine, no problem when using 1 GB SD card. What SD 4 GB inserted PC card works very slowly. Finally, I am able to run the software Toshiba Format SD memory card (download the latest version). It does not seem to recognize the card of 4 GB. Unable to format. When later tried with 1 GB card, everything works fine.

  If someone was able to get a 4 GB SD card?

  I'm not sure if the laptop software needs a patch, or if the 4 GB card is not fully compatible with SD cards standards, however it was purchased from reputable suppliers.

  Graham

  Hello

  I think that it s nothing wrong with the software, but the SD card is simply not compatible 100%.
  In recent times, the SD card sizes are rising rapidly.
  I think that the card reader and the software were not intended to manage this big SD card like this.

  How to buy an external SD card reader?
  These devices are not very expensive and I think the new generation should be able to also handle 4 GB SD cards.

• I have a Dell Dimension 4500 Windows XP Pro SP 2. I have a new installation disk. Windows Update will not work and Microsoft Update will not work either. What Miss me?

  Pentium 4 CPU

  1 GB of RAM.

  Win XP Pro - SP 2

  Dell Dimension 4500

  If it will not download from this link on your PC, try another and just use a USB key to copy on you and then run it. Once installed SP 3, and then the fun begins because there are about 100 + updates after her.

• "Unable to format the drive in Windows.

  "Unable to format the drive Windows" (c drive)

  Victory impossible to format the drive sys (win). It's more like a branch of cut while you were sitting on it.

  If you try to clean reinstall win that you start from the cd of the winxp http://michaelstevenstech.com/cleanxpinstall.html

• Unable to formate USB

  Hello

  IAM unable to formate my USB. I had the doubt of the virus, scanned with a leading anti virus program but not virus. I restarted my laptop, then also I couldn't format my pen drive.i tried with different pendrive but no use.

  Please help me.

  TNX in adv.

  Look at this: http://www.ehow.com/how_2006214_format-flash-drive.html

• Unable to format the memory card, I get the message "windows could not format.

  Original title: car micro sd problem
  
  Hello
  my laptop detects the memory card (after a good dose of refreshing it), but whenever I try to open it or scan or format, any area 'my computer' freezes. and, now my phone displays the message "no inserted memory card. I use a dell inspiron 1525 with windows vista sp2 with 3 GB of ram and and 230 GB hard drive.
  to get you in the loop, the songs on my memory card using previously to disappear on their own or used to go corrupt, so I decided to scan it. now, when I insert in my lappy, im facing this new problem. kindly helppppppppp me.
  PS - after several attempts, I had the option to put in shape, but after clicking on the option, I get the message "windows could not format.

  Hello

  You are able to use any other memory card with no problems on the same computer?

  Try to format it on another computer and check. If you are unable to format it on another computer then it is perhaps because of the corrupted memory card. You will need to contact the manufacturer for assistance.

• Hard drive for Dimension 4500 update

  I want to upgrade my hard drive in my dell dimension 4500.

  Please can you tell me if the following hard drives work?  If none of them do, please advise me on which hard drive I should get.

  • Seagate ST3750330AS 750GB Hard Drive SATAII 7200 tr / min * 32 MB Cache *-OEM
  • Seagate DB35 Series 7200.3 internal 750 GB hard drive

  Thank you.

  
  

• Unable to format hard drive for Windows

  Hello, I need your help here! You receive the same error message saying: "Windows is unable to complete the format" when you try to format an external hard drive on your computer? Honestly, the hard drive of my dell computer recently asked just to get in shape when it has been used on my Windows 7 computer. However, when I click on Yes to format this drive with my lost player documents and files, windows says just windows could not complete for formatting? Honestly, I used Google to search for the error problems related unable to complete the format windows and also asks me to select a formatting program? What you recommend me? This software is useful for my case? Thanks for any suggestions here!

  Hello

  If you have a mac, you can use a utility called disk pre-installed program. Connect your external DRIVE for mac drive and find an application called disk utility, in disk utility, there should be an option to erase the external HARD drive. It may come with an error similar to what you had before, but it's certainly worth a try. Let me know if this worked for you.

  Thank you

• Unable to format 64 GB on Nikon d700 CF card

  Hello

  I just bought a new Extreme Pro 64 GB CF for my Nikon D700 card.  I tried to format it in the camera with no luck.  No matter how I try, it keeps flashing FULL and 0.  I called Nikon technical support and they say that the 64 GB CF card is not in their list of approved (tested) memory cards.  They said the 64 may be too large for the Nikon D700 to function.  They are unable to provide additional support.  However the Extreme Pro 64 GB CF card has the D700 listed under comparable cameras...

  SanDisk technical support responded to my question.

• Sansa E280 unable to Format disk. Need HELP!

  Hey ho Sansa users,.

  So! Here's my dilemma. I got my Sansa for 2 1/2 years. So far, no problem. Recently even though I was starting to have some funky things happening, the noise turning randomly on its own or the song randomly jumping, not much, only occurred once in a blue moon. Now that about a couple of weeks, for some reason strange, downloaded other titles on my drive, as usual and after playing a few times very well, they began to get damaged. Aka. The sound would be cut in the headphones, and then slowly back through static, or the song would stop playing altogether and there would be a mermaid acute start sounding in my helmet. I had some problems with my Sansa before and the guy I spoke to said to format the hard drive. So, I tried to format the hard drive, but it says unable to complete the format. In addition, for some reason that disk space is showing the player as being empty, but when I look in the hard drive (in browser windows) there is always as 50 active files that I deleted (or tried to remove) like 7 times and each time that they keep reappearing. I updated my firmware, but it still doesn't seem to work or I want to erase the disc.

  Thoughts?

  Any help is greatly appreciated!

  Mojo

  Looks like you have some seriously damaged files.

  Make sure that (under settings/USB Mode) you are to the CSM.

  Try chkdsk

  If this does not work, then try again shaping and keep an eye on every step. When you get the message "cannot format"?

• Unable to format my new drive sata hard with windows.

  I bought a new (raw) sata Western Digital 2 TB Caviar Green to use as a second hard drive in my system.  I installed it fine and BIOS and windows recognizes it.  I assigned a drive letter with disk management and made the active partition.  In disk management, it shows: Disk 0 basic 1863.02 GB Online - (m :)) healthy (primary, Active Partition BRUTE))

  The last thing I have to do to make this drive work is format.  What windows seems unable to do.  If I try to do a quick format within two minutes, I get the message "Windows was unable to complete the format".  And when I tried to do the complete method it seemed to do very well, after about 90 minutes, it was made, to halfway and then six hours later the bar had not progressed at all.  Which forced me to restart my computer I could do something for her again.  Before restarting, he kept saying that I didn't have permissions to do something for the reader.

  Normally I think it was a bad drive, but about six months ago, I bought seagate 1.5 TB internal a drive and exactly the thing happened, I ended up sending this rear disc.  Now I start to worry, it's something else.

  I am running Windows Vista Home Premium x 64 with service pack 2, I have protection anti-virus and Windows updates to current day without any problem.  5 GB of ram, AMD image treatment.

  Hi Calabrel,

  In NVIDIA driver downloads: http://www.nvidia.com/Download/index.aspx?lang=en-us there is one ' Option 2: automatically find drivers for my NVIDIA products ", click the DRIVERS of motherboards. Simply download active x NVIDIA Smart Scan Tool.

  I hope I could help

• card SanDisk 2 GB micro. Unable to format.

  I insert the card, go to my computer, right click, and then click format. The green progress bar ends roughly and then a message appears that "Windows was unable to complete the formatting." I'm puzzled. Anyone?

  http://KB.SanDisk.com/app/answers/detail/A_ID/312

  Read thre above information from the manufacturers.

  3. Select a type of file system .
  NOTE: Select FAT32 4 GB or higher capacity. GREASE for 2 GB or lower capacity

  See you soon.

  Mick Murphy - Microsoft partner

• I just installed windows 7 on an old dell dimension 4500 s. The installation went well, but I have a problem with the resolution of the screen. The resolution is set to 640 x 480 and my monitor is much better than that.

  • Just installed Windows 7 Home Premium Upgrade - 32-bit
  • Installed on the old Dell Dimension Dsktp 4500 s
  • Monitor is a Dell S199WFP Flat widescreen.
  • Everything seems fine, but the screen display resolution is messed up
  • Display resolution is set to 640 x 480, then it should be something like 1024 x 768
  • I can't change the resolution in the control panel
  • the screen is recognized as "Non - PnP Monitor on Standard VGA Graphics Adapter generic
  • It also seems that the driver is up-to-date

  What's wrong?!? Someone please help.

  Thank you!

  I remember that when I tried to install the driver, there's a message that says that it is said that it is not supported.  I don't know if I reinstalled the older operating system and then the new driver and vista or if there was a button to install the driver, even though it was not taken in charge.  Most likely, I installed the driver on the old XP operating system and then applied the upgrade to Vista. I always run a clean install to clean any spyware etc. The driver supports the X 9 live is what it takes. Use Vista driver is already installed.  I plan to upgrade to windows 7 in January and display the results.

• Unable to format or use the internal hard drive

  I have a 2007 MacBook that was running on a replacement HD (500 GB) 10.6.8.  I got a new MB Air and want to wipe the HD and reinstalling the system, so my children can use the old MB.  The MacBook was working fine when I started this process.  When I started with the original and selected installation disk utility disk to erase the disk, erase failed with a "input/output error.  I can't format the drive and I can't even choose the drive to re - install without erasing the disc (no drive does appear in Setup).  What happens every time that I try it now.

  Now I can't even use the HD to start the MacBook.  Utility of disk can see the drive, but it appears as a 3.6 TB drive, not a 500 GB drive, and is only a single line in the sidebar (typically there are two lines per disc).  Info is supported if I don't care if I lose everything, but I would like to be able to use the drive as it should be a computer budget.  Partitioning does nothing, fail all attempts to clear it.  Next step is probably to remove it and try to erase its content in an external enclosure.

  Can someone explain what could happen?  Why doesn't the drive suddenly stop working to the point of not even be recognized correctly when minutes before it worked fine?  And what I can do about it?

  Thank you.

  Reading input output error errors are for the most part. Which usually means a failing drive. A tool like DiskWarrior could fix, but you can (on Ebay) pick up a drive used for this price. Readers can fail with or without warning. It will sometimes lag and hard starts spinning beach balls and no start of the thread. Or you run it, close it and then the next time it starts, it will not work. Disc utilities will usually fix this kind of error. The only work around in utilities is to perform a full disc erase and distribution, if possible.

• Unable to format disk CD - RW on portable Satellite series

  I'm trying to format a lot of CD - RW discs.
  Laptop seems almost to complete the formatting, but a possible icon will appear to indicate that Windows could not perform formatting the drive.

  Any suggestion would be a help, and also to explain why I was able to format a standard CD - R disc without problem.

  Hello

  First of all I would like to know what model of laptop you have and I would like to know how you tried to format CD - RW?

  Have you used a tool like Nero Burning ROM third 3rd?

  I use Nero and this software provides an option to format a CD - RW disc.