Dimension 5150 cpu Upgrade

Similar Questions

• Dell dimension 5150 Cpu Upgrade help?

  Hi, I have a dell dimension 5150 3 GB of ram I currently am all an Intel Pentium d 2.8 ghz (LGA 775), and I was wondering what is the best upgrade can take my motherboard 0HJ054. Full specifications below.

  -Plug-

  TXT of CPU - Z report
  -------------------------------------------------------------------------

  Binary files
  -------------------------------------------------------------------------

  CPU - Z version 161.2

  Processors
  -------------------------------------------------------------------------

  Number of processors 1
  Number of threads 2

  APICs
  -------------------------------------------------------------------------

  Processor 0
  -Core 0
  -Wire 0 0
  -Core 1
  -0-1 wire

  Information for processors
  -------------------------------------------------------------------------

  Processor 1 ID = 0
  Number of cores 2 (max 2)
  Number of threads 2 (max 2)
  Name Intel Pentium D 820
  Codename SmithField
  Specification Intel (r) Pentium (r) D CPU 2 .80GHz
  Package (platform ID) Socket LGA 775 (0x4)
  CPUID 4.7
  F.4 extended CPUID
  Core Stepping B0
  90 nm technology
  Basic speed 2796,3 MHz
  X FSB multiplier 14.0 x 199,7 MHz
  798,9 MHz rated Bus speed
  Stock frequency of 2800 MHz
  Instructions sets MMX, SSE, SSE2, SSE3, EM64T
  Data L1 cache 2 x 16 KB, size 8-way line set associative, 64 bytes
  Hidden trace Kuops 2 x 12, 8-way set associative
  L2 cache 2 x 1024 KB, size 8-way line set associative, 64 bytes
  FID/VID control not

  Chipset
  -------------------------------------------------------------------------

  Model of motherboard 0HJ054
  Northbridge Intel i945P/PL/G/GZ Rev A2
  Southbridge Intel 82801GB (ICH7/R) Rev A1
  Memory type DDR2
  Memory size 3072 MB
  Double channels
  Frequency memory 266,3 MHz (3:4)
  Latency CASE # (CL) 4.0
  # For CASE # delay (tRCD) RAS 4
  RAS # Precharge (tRP) 4
  Cycle Time (tRAS) 12
  (TRC) Bank Cycle time 16
  Base address e/s MCHBAR 0x0FEDA0000
  E/s MCHBAR size 4096

  Memory SPD
  -------------------------------------------------------------------------

  DIMM # 1
  SMBus address 0 x 50
  Memory type DDR2
  Regular UDIMM module format
  MOSEL manufacturer (ID) (4000000000000000)
  Size 512 MB
  Band bandwidth PC2-4300 (266 MHz) max
  V916764K24QAFW-E4 part number
  Serial number 1153079D
  The year of manufacture date week/31/06
  Number of banks 1
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 3.0 - 3-3-8-11 to 200 MHz
  JEDEC #2 4.0 - 4-4-11-15 at 266 MHz
  JEDEC #3 5.0 - 4-4-11-15 at 266 MHz

  DIMM # 2
  SMBus address 0 x 51
  Memory type DDR2
  Regular UDIMM module format
  Manufacturer (ID) PNY Electronics (7FBA000000000000)
  Size 1024 MB
  Bandwidth Max PC2-6400 (400 MHz)
  Part number
  Number of banks 1
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 4.0 - 4-4-12-16 at 266 MHz
  JEDEC #2 20 5.0 - 5-5-15 @ 333 MHz
  JEDEC #3 6.0 - 6-6-18-24 @ 400 MHz

  DIMM # 3
  SMBus address 0 x 52
  Memory type DDR2
  Regular UDIMM module format
  MOSEL manufacturer (ID) (4000000000000000)
  Size 512 MB
  Band bandwidth PC2-4300 (266 MHz) max
  V916764K24QAFW-E4 part number
  Serial number 5954079C
  The year of manufacture date week/31/06
  Number of banks 1
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 3.0 - 3-3-8-11 to 200 MHz
  JEDEC #2 4.0 - 4-4-11-15 at 266 MHz
  JEDEC #3 5.0 - 4-4-11-15 at 266 MHz

  DIMM # 4
  SMBus address 0 x 53
  Memory type DDR2
  Regular UDIMM module format
  Manufacturer (ID) PNY Electronics (7FBA000000000000)
  Size 1024 MB
  Bandwidth Max PC2-6400 (400 MHz)
  Part number
  Number of banks 1
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 4.0 - 4-4-12-16 at 266 MHz
  JEDEC #2 20 5.0 - 5-5-15 @ 333 MHz
  JEDEC #3 6.0 - 6-6-18-24 @ 400 MHz

  Mike 5150

  Next post should help,

  http://en.community.Dell.com/support-forums/desktop/f/3514/p/19436963/20053889.aspx#20053889

  Before installing the processor, verify that the version of the BIOS A05 or higner is installed, when support for the latest processors has been added.

  Bev.

• Dimension 5150 CPU upgrade options

  Hello

  I bought my Dimension 5150 almost 2 years ago. It uses a Pentium D 2.8 Ghz and his mother is an Intel i954G using socket LGA 775. I would like to know what are my options to upgrade CPU. If it is still possible to upgrade my CPU.

  I did some research and saw that this motherboard supports CPU C2D. Responses of the other forums of stress that the upgrade of processor is impossible because Dell locks the mobo/bios, it is impossible to upgrade (it will never recognize the new processor). It's a shame if I can't upgrade my CPU because the rest is pretty decent. I have 3 GB of RAM and a HD3850.

  If possible, Dell only updated for the customer? And what is the best processor I can get which is supported by this mobo?

  Thank you.

  EDIT: I double checked and it seems that there are a lot of confusion if my Board can support a C2D even if it's a mobo socket LGA775. List of site Intels C2D's as usable processor Intel 945 G express boards. BTW, I improved my diet to a 460 Watt cooler master.

  Message edited by theshi on 08/17/2008 05:40
  
  

• Dimension 5150 Ram upgrade

  I have a Dimension 5150 with 1 GB of ram to 2 512 mb DDR2 sticks.

  I want to go 2 RAM sticks of 2 GB to 4 GB of Ram this computer manages it?

  I ask because I bought 2 PNY 2 GB P6400 tech when I intalled them my pc beaped just to me and would not boot.

  Is it cus I don't use ram dell or will my comp just not manipulate.

  
  

• Dimension E520 CPU Upgrade

  I have a Dimension E520 which I'm looking to upgrade the processor wise,

  Motherboard Info:

  Model: 0WG864

  Chipset: P965/G965 Rev C2

  Aware of the processor: Intel Pentium D 820

  Socket LGA 775

  Other hardware upgrades:

  4 GB of Ram

  ATI Radeon HD 2900 PRO

  850 W OCZ power supply

  Do not know if those that affect any that the cpu can be used... maybe the power supply...

  so, what would be the BEST CPU available for me?

  Message edited by morbital on 17/09/2008 12:53 AM
  
  

• Dell Dimension C521 CPU Upgrade

  Hi all. I have a Dimension C521 (feat) and I would like my CPU from a AMD Sempron (TM) Processor 3400 + ~1.8GHz to an AMD Athlon 64 X 2 6000 3.0 GHz 2 MB socket AM2 89W ADA6000IAA6CZ. But I'm not sure about a few things, that's why I'm here. I would like to know:

  • If the AMD Athlon 64 6000 works with my computer of x 2
  • What is the recommended BIOS
  • If the fan the C521 comes with is good enough to keep it cool
  • If a 280W 955.39BTU / h Maximum PSU is fine
  • If you have any questions = D

  Here is the owner's manual, if it'll help - ftp://ftp.dell.com/Manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-c521_owner ' s%20manual_en-us.pdf

  Also, if I had to update my GPU, what would you recommend?

  xXEblisXx

  The Athlon 64 X 2 6000 + 3.0 Ghz, 89W Windsor, will work.

  Before installing the processor, make sure you have the latest version of the BIOS version installed 1.1.11, with BIOS version 1.1.4 support AMD has been added.

  The default fan and the PSU should be fine.

  Bev.

• Dell Dimension E520 CPU Upgrade

  Hi, I upgraded my CPU because it is too slow, and that I am I going to pay $ 80 instead of the usual price of $250. I would like to know if they are compatible with my system. All the I know is that they have the same type of socket (LGA 775). Here is the link: http://www.newegg.ca/Product/Product.aspx?Item=N82E16819115060CVF

  Here's my current computer specs: 4 GB RAM DDR2 1 GB GDDR5 128 bit AMD video card, 1.86Ghz Intel core 2 duo CPU (valued at 3.33 Ghz) and a 305 power w.

  If I need to change the power supply, I would love to know because I have one here that's 750w I could also use. Thank you.

  Daren

  * P.S: I know I need to update my BIOS because I am currently at version 2.2.1 and the most recent is 2.2.4 (or something like that) should I just brings it to someone to do it for me, or is it easy to update? I don't know where to find them, so if someone could possibly direct me, I BIOS Phoenix technologies.

  Thanks a lot again!

  DarenDussault

  The Core 2 Quad Q9505 Yorkfield 2.83 GHz LGA775 95W shown in your link is not compatible with the e520.

  All Socket LGA 775 processors, listed HERE are compatible.

  There should be no need to improve the power supply for a processor upgrade.

  Bev.

• Dell dimension e510 CPU upgrade

  Almost 2 years ago, I bought a dell dimension e510 with the pentium d 820 installed processor desktop computer but now I want to put the best processor in it it may take. I did some research and discovered it might support only the pentium d, pentium 4 hyperthreading w and that the pentium d 960 was supposed to be the best pentium d processor available. I bought a

  now heres where the problem begins: I put it in (radiator and all), but when I plugged it in, the power of computers led turns orange and nothing happens; No start, display, diagnostic lights or a message saying incompatible processor. I put the back of 820 to and it worked fine but the same 960 post custom. I thought that maybe the processor could be bad, so I sent it back, but the seller (seller ebay w / 99% positive feedback) says that it worked fine when he tested and it sends to me.

  I would like to know if anyone knows why it might not work, I need a different version of the card mother e510, make, it would be inconsistent, or I need to do something special (like asking dell for permission?)

  According to everest, my motherboard is 0HJ054, a07 bios revision. any ideas?

  
  

• Upgrade CPU Dell Dimension 5150. Is the cooling system to work?

  I have a Dell Dimension 5150 with a Pentium 4 HT 630 (84 W tdp). I want to replace it with a Pentium D 920 (95W tdp) is the heatsink and the fan is going to face? I'll be cleaning and demean the new thermal paste.

  PonderBoy

  Yes, the default heat sink and fan should be thin.

  Bev.

• The upgrade of old Dell Dimension 2400 CPU, GPU, memory, etc...

  Mainly interested in CPU upgrade at this time. I have download CPU - Z to determine my profile and I provide this stitched-together set screenshots of this program:

  

  I just put the CPU of my Dimension 5150 friend successfully. I would only reproduce on my 2400 - a much smaller machine. This computer is mainly used for the casual internet browsing, and sometimes I watch a Youtube video. The only programs that really tax the CPU are my disk defragmentation and the program CCleaner. When I have a great session of internet browsing of 100 + tabs, the CPU also emerged at this time here.

  I want to the maximum this computer using cheap parts upgrades, that I can buy it on eBay. On my 5150 friend, I bought a processor upgrade for $5 delivered and a thermal paste to ebay for 80 cents. I wouldn't mind buying a cheap video card and processor to upgrade this old workhorse

  sva50233

  The Dimension 2400 can use 400 MHz or 533 MHz, Socket 478, P - 4 Northwood or Celeron processor with a 512 k or more small cache.

  You cannot use all processors Prescott [1 MB cache].

  The maximum support of the processor is P - 4 Northwood, 533 MHz, Socket 478, 3.06 GHz.

  Before upgrading the processor, make sure you have the latest version of the BIOS installed.

  With regard to the video card, only the PCI cards are supported, no PCI Express card is supported.

  The Dimension 2400 supports a maximum of 2 GB (2 x 1 GB Modules) memory DDR.

  Bev.

• The Dimension 3000 processor upgrade

  I want to improve my old dimension 3000 D325 celeron processor equipped with a pentium 4.

  When I looked in the Dell user manual it says that the best processor I can get is a pentium 4 at 3.2 Ghz with hyper thread.

  When I looked at the site http://www.cpu-upgrade.com/mb-Intel _ (chipsets) 865GV.html it says I can put a 3.4 Ghz! and the list of the processor is much longer.

  Is there anyone who knows if I can use a pentium 4 3.4 GHz, 1 MB L2 cache with hyper threading?

  lingophi

  Either the Socket 478, P4 3.2 GHz or the 3.4 GHz P - 4 will work.

  Before you replace the processor, verify that the BIOS Version A03 is installed, when adding support for the latest processors has been added.

  Bev.

• Dell Dimension 5150 do not start LED logo on 123 + progress bar is stuck at 5% no beeps

  My old Dell Dimension 5150 has sometimes suffered from crashes during startup for quite awhile, but it now appears permanent.

  The symptom is the logo dell appears, but the startup progress bar stops at 5%, diagnosis LED 1,2 & 3 are stable on, power light is green fixed, no beeps, no response to the keys.

  In the past disconnecting the cable for 5 minutes, which gives all the internal connectors a re-allocation of places, you try to start again seemed to do the trick, but no more.

  Any suggestions where to look?

  No such thing as PC2 4300 except for sellers who are less honest.

  http://www.crucial.com/USA/en/compatible-upgrade-for/Dell/dimension-5100

  

  PC2 4200 is too slow

  PC2 5300 5 5 5 12 works fine. Suppliers must match for speed and the CASE.

  Blockages can be feed if it isn't certified EPS12v PFC.

  Minimum recommended is CS750M Corsair.

  http://www.crucial.com/USA/en/dimension-5100/CT667636

  Supplies are not units of 12 v x watts.

  You need 150W on the 3.3v 5v Rails and 15-20w on the + 5VSB rail.

  RAM RAM may NOT BE ECC or buffered or Registerd HIGH density AMD.  Must be LOW DENSITY INTEL Compatible ram.

  RAM cannot BE QUADRI ROWS can operate 2R and 1R, but you can NOT MIX the ranks.  They must all be single or dual rank.

  http://www.Newegg.com/product/product.aspx?item=9SIA7S63715258

• Equium L20-264 - CPU upgrade

  Hello world

  I have Toshiba Equium L20-264 and I want to move into gear
  Can someone help me please?

  I had already upgraded to 2 GB of Ram, but my CPU is still 1.4 GHz.

  Please guide me what to do and if it supports several Ghz processor, which will be the best place to buy.

  Thank you.

  I assume that you have not read all the posts here in the forum about upgrading the CPU s for laptop?
  Did you?

  Some facts first:
  Update CPU is very delicate and depends on the chipset and BIOS support.
  In case one of the parties (chipset or bios) would not support new CPU, the will to power laptop on.

  Second: the laptop seems to be equipped with an Intel Celeron - M CPU, and I suppose the other Intel Celeron-M CPU be compatible:
  Intel Celeron M 370 (1.5 Ghz)
  Intel Celeron M 380 (1.6 Ghz)

  Everything supports the FSB 400 Mhz

  But guess what? Even if you add the new processor at 1.6 Ghz, the performance gain will be not noticeable. So in my eyes, CPU upgrade for this old book is useless. It won't add any performance benefits.

• Satellite Pro L630 - 14L - CPU upgrade possible?

  Is it possible to upgrade processor in this model: L630 14 L? If yes what processors are supported?
  Another question - my hdmi port stopped working - is the possible replacement?

  Hello

  With regard to the question on the CPU upgrade:
  This question was asked several times here in the forum. I recommend you read the other discussions on upgrading the CPU.

  Usually, the case is simple: the manufacturers of portable don t support this upgrade for clean products. The CPU is delicate because the new processor must be based on two essential elements: chipset and BIOS.

  The laptop supports the Mobile Intel HM55 Express Chipset.
  So, you know, what would the CPU supported by the chipset.
  But like I said above: the BIOS support is also important and finally everything depends on the BIOS whether your new processor works or not.

• Qosmio G40 - 10Z - possible CPU upgrade?

  What processor can I put my Qosmio G40 - 10Z? I couldn't find a list and the motherboard is a "motherboard Toshiba" without a template or similar.
  I would like to change to a better processor, a quadcore would be well, is - it possible?

  My Windows 7 tells me to change the battery, but the battery is ok. Google says its due to Windows and could be solved by the BIOS updated. I have the newest
  Official home page. There is no latest BIOS available?

  Thank you

  Robert

  Hello

  I doubt that the CPU upgrade would be possible. You should read this article:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  This error message is it exactly that you get Windows 7? Normally you get only a low battery notification, you need to Exchange or connect the power supply.