Dimension 5150 Ram upgrade

Similar Questions

• Dell dimension 5150 Cpu Upgrade help?

  Hi, I have a dell dimension 5150 3 GB of ram I currently am all an Intel Pentium d 2.8 ghz (LGA 775), and I was wondering what is the best upgrade can take my motherboard 0HJ054. Full specifications below.

  -Plug-

  TXT of CPU - Z report
  -------------------------------------------------------------------------

  Binary files
  -------------------------------------------------------------------------

  CPU - Z version 161.2

  Processors
  -------------------------------------------------------------------------

  Number of processors 1
  Number of threads 2

  APICs
  -------------------------------------------------------------------------

  Processor 0
  -Core 0
  -Wire 0 0
  -Core 1
  -0-1 wire

  Information for processors
  -------------------------------------------------------------------------

  Processor 1 ID = 0
  Number of cores 2 (max 2)
  Number of threads 2 (max 2)
  Name Intel Pentium D 820
  Codename SmithField
  Specification Intel (r) Pentium (r) D CPU 2 .80GHz
  Package (platform ID) Socket LGA 775 (0x4)
  CPUID 4.7
  F.4 extended CPUID
  Core Stepping B0
  90 nm technology
  Basic speed 2796,3 MHz
  X FSB multiplier 14.0 x 199,7 MHz
  798,9 MHz rated Bus speed
  Stock frequency of 2800 MHz
  Instructions sets MMX, SSE, SSE2, SSE3, EM64T
  Data L1 cache 2 x 16 KB, size 8-way line set associative, 64 bytes
  Hidden trace Kuops 2 x 12, 8-way set associative
  L2 cache 2 x 1024 KB, size 8-way line set associative, 64 bytes
  FID/VID control not

  Chipset
  -------------------------------------------------------------------------

  Model of motherboard 0HJ054
  Northbridge Intel i945P/PL/G/GZ Rev A2
  Southbridge Intel 82801GB (ICH7/R) Rev A1
  Memory type DDR2
  Memory size 3072 MB
  Double channels
  Frequency memory 266,3 MHz (3:4)
  Latency CASE # (CL) 4.0
  # For CASE # delay (tRCD) RAS 4
  RAS # Precharge (tRP) 4
  Cycle Time (tRAS) 12
  (TRC) Bank Cycle time 16
  Base address e/s MCHBAR 0x0FEDA0000
  E/s MCHBAR size 4096

  Memory SPD
  -------------------------------------------------------------------------

  DIMM # 1
  SMBus address 0 x 50
  Memory type DDR2
  Regular UDIMM module format
  MOSEL manufacturer (ID) (4000000000000000)
  Size 512 MB
  Band bandwidth PC2-4300 (266 MHz) max
  V916764K24QAFW-E4 part number
  Serial number 1153079D
  The year of manufacture date week/31/06
  Number of banks 1
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 3.0 - 3-3-8-11 to 200 MHz
  JEDEC #2 4.0 - 4-4-11-15 at 266 MHz
  JEDEC #3 5.0 - 4-4-11-15 at 266 MHz

  DIMM # 2
  SMBus address 0 x 51
  Memory type DDR2
  Regular UDIMM module format
  Manufacturer (ID) PNY Electronics (7FBA000000000000)
  Size 1024 MB
  Bandwidth Max PC2-6400 (400 MHz)
  Part number
  Number of banks 1
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 4.0 - 4-4-12-16 at 266 MHz
  JEDEC #2 20 5.0 - 5-5-15 @ 333 MHz
  JEDEC #3 6.0 - 6-6-18-24 @ 400 MHz

  DIMM # 3
  SMBus address 0 x 52
  Memory type DDR2
  Regular UDIMM module format
  MOSEL manufacturer (ID) (4000000000000000)
  Size 512 MB
  Band bandwidth PC2-4300 (266 MHz) max
  V916764K24QAFW-E4 part number
  Serial number 5954079C
  The year of manufacture date week/31/06
  Number of banks 1
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 3.0 - 3-3-8-11 to 200 MHz
  JEDEC #2 4.0 - 4-4-11-15 at 266 MHz
  JEDEC #3 5.0 - 4-4-11-15 at 266 MHz

  DIMM # 4
  SMBus address 0 x 53
  Memory type DDR2
  Regular UDIMM module format
  Manufacturer (ID) PNY Electronics (7FBA000000000000)
  Size 1024 MB
  Bandwidth Max PC2-6400 (400 MHz)
  Part number
  Number of banks 1
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 4.0 - 4-4-12-16 at 266 MHz
  JEDEC #2 20 5.0 - 5-5-15 @ 333 MHz
  JEDEC #3 6.0 - 6-6-18-24 @ 400 MHz

  Mike 5150

  Next post should help,

  http://en.community.Dell.com/support-forums/desktop/f/3514/p/19436963/20053889.aspx#20053889

  Before installing the processor, verify that the version of the BIOS A05 or higner is installed, when support for the latest processors has been added.

  Bev.

• Dimension 5150 CPU upgrade options

  Hello

  I bought my Dimension 5150 almost 2 years ago. It uses a Pentium D 2.8 Ghz and his mother is an Intel i954G using socket LGA 775. I would like to know what are my options to upgrade CPU. If it is still possible to upgrade my CPU.

  I did some research and saw that this motherboard supports CPU C2D. Responses of the other forums of stress that the upgrade of processor is impossible because Dell locks the mobo/bios, it is impossible to upgrade (it will never recognize the new processor). It's a shame if I can't upgrade my CPU because the rest is pretty decent. I have 3 GB of RAM and a HD3850.

  If possible, Dell only updated for the customer? And what is the best processor I can get which is supported by this mobo?

  Thank you.

  EDIT: I double checked and it seems that there are a lot of confusion if my Board can support a C2D even if it's a mobo socket LGA775. List of site Intels C2D's as usable processor Intel 945 G express boards. BTW, I improved my diet to a 460 Watt cooler master.

  Message edited by theshi on 08/17/2008 05:40
  
  

• Dimension 5150 cpu Upgrade

  I have 4 dell dimension 5150's and you want to update all the 4 fastest possible CPU for this old of a computer.

  Would an Intel Pentium D 945 3.4 work GHz LGA 775 CPU SL9QQ 4 M/800 Presler Dual Core?

  They now have PROCESSORS, 3.06, 524, 1 MB, PENTIUM 4 PRESCOTT DT, G1

  Or what is the best I could get in these?

  I have windows 7 and hoping to be able to get up to 10 but the 524 is not compatible.

  scbauml

  The Pentium D945 is the maximum that can be used in the Dimension 5150/E510.

  However, if you don't have motherboard 0HJ054 installed and upgrade the processor on most other motherboards will rise a 'incompatible CPU"at startup and need to press F1

  The Dimension 5150/E510 does not support all of the processors Pentium G20xx series, these require a different motherboard and socket.
  .
  The motherboard for the Dimension 5150/E510 has a Socket LGA 775 and can't stand not all processors Core 2 Duo/Core 2 Quad, single Socket LGA 775, P4 and Pentium D can be used.

  The Pentium D945 is the maximum that can be used in these models.

  Before upgrading the processor, make sure you have the latest version of the BIOS installed.

  You can find more Dimension E510/5150 upgrade information here:

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19322845.aspx#19660018

  Bev.

• Dell Dimension 2400 RAM upgrade

  I've recently updated my memory on my Dell Dimension 2400 512 MB to 2 GB (entirely new memory sticks) and when I try to start my computer I get a series of loud beeps and no video input. I tried the stick at a time and I re installed to ensure that them have been installed correctly. Any advice would be greatly appreciated.

  System specs

  processor Pentium 4 2.5 ghz

  512 MB nVidia gt610 graphic

  512 MB of RAM

  Hi orcacros,

  Welcome to the community.

  Please let me know the specification of the new memory sticks. If you bought this online store, please give the link.

  It's starting with the old memory stick?

  If it is booting with the old memory stick, please update the BIOS by clicking on the link below:

  http://Dell.to/XBFOGw

  Dell Dimension 2400 will take care of the modules of memory 266 MHz or 333 MHz. Modules of DDR 200 MHz speed are not supported.

  Thank you & best regards
  Mustapha S
  #iworkfordell

• For Dimension 2400 RAM upgrade

  I have a Dimension 2400, P4 2.8 ghz with 256 MB of RAM that appears on the card 256 MB 333 MHZ DDR MEMORY (1 X 256) NONECC technical, it is not enough, so I plan on getting 2 x 512. I checked with critical and they are listing 2 different types of 512 RAM - 333 mhz (PC2700) and 400 mhz (PC3200). I was wondering if buying 400 mhz RAM would make a difference in performance or if 400 mhz is even compatible?

  Thank you!

  
  

• Upgrade CPU Dell Dimension 5150. Is the cooling system to work?

  I have a Dell Dimension 5150 with a Pentium 4 HT 630 (84 W tdp). I want to replace it with a Pentium D 920 (95W tdp) is the heatsink and the fan is going to face? I'll be cleaning and demean the new thermal paste.

  PonderBoy

  Yes, the default heat sink and fan should be thin.

  Bev.

• Dell Dimension 5150 do not start LED logo on 123 + progress bar is stuck at 5% no beeps

  My old Dell Dimension 5150 has sometimes suffered from crashes during startup for quite awhile, but it now appears permanent.

  The symptom is the logo dell appears, but the startup progress bar stops at 5%, diagnosis LED 1,2 & 3 are stable on, power light is green fixed, no beeps, no response to the keys.

  In the past disconnecting the cable for 5 minutes, which gives all the internal connectors a re-allocation of places, you try to start again seemed to do the trick, but no more.

  Any suggestions where to look?

  No such thing as PC2 4300 except for sellers who are less honest.

  http://www.crucial.com/USA/en/compatible-upgrade-for/Dell/dimension-5100

  

  PC2 4200 is too slow

  PC2 5300 5 5 5 12 works fine. Suppliers must match for speed and the CASE.

  Blockages can be feed if it isn't certified EPS12v PFC.

  Minimum recommended is CS750M Corsair.

  http://www.crucial.com/USA/en/dimension-5100/CT667636

  Supplies are not units of 12 v x watts.

  You need 150W on the 3.3v 5v Rails and 15-20w on the + 5VSB rail.

  RAM RAM may NOT BE ECC or buffered or Registerd HIGH density AMD.  Must be LOW DENSITY INTEL Compatible ram.

  RAM cannot BE QUADRI ROWS can operate 2R and 1R, but you can NOT MIX the ranks.  They must all be single or dual rank.

  http://www.Newegg.com/product/product.aspx?item=9SIA7S63715258

• Installation of Radeon 9800 Pro in Dimension 5150

  I have a Dimension 5150 with 3.0 Intel Pentium 4, 1 GB RAM and Intel graphics. I have a Radeon 9800 Pro a 8300 Dim now deceased and want to install it in the Dim 5150. I have two questions:

  1 - is the 9800 Pro compatible with the Dim 5150? (I guess it is) and

  2. are there instructions somewhere on how to install it?

  Thank you.

  I guess the 9800 Pro AGP, so it is not compatible. It is also prehistoric and likely much slower a 6450 budget.

• Max Memory a Dimension 5150 with Vista Home Premium can take?

  I have a Dimension 5150 P4 3.0 GHz and 2.5 GB of RAM. Yesterday, I installed Vista Home Premium on it.

  How much more memory I can install?

  
  

• Satellite Pro C850-1HD: valid guarantee after RAM upgrade?

  I work with a laptop Toshiba Satellite Pro C850-1HD in the warranty period, and I would like to know whether to extend the warranty for laptop RAM is maintained.

  Thank you

  > I would like to know whether to extend the warranty for laptop RAM is maintained.
  RAM upgrade does NOT affect the warranty.

  Here you can find instruction and nice workaround how to replace Toshiba Satellite Pro C850 modules series
  [Satellite Pro C850 / L850 - Memory Module replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU2603BZ0000R01.htm]

• Satellite R630-13F - RAM upgrade

  Hi all

  My R630 is faced with a newly added software for Photoshop (CS5 version). Whenever it is quite slow to open and try to merge the picture for the economy.

  I was wondering if I can upgrade the RAM. With a very limited knowledge, I would like to know if I need to buy an additional (if there is a vacancy for it), or I need to get one to replace the old.

  I think increasing the memory to 4 GB, but I was wondering if it will be enough for Photoshop. Thanks a lot for any input.

  Best wishes

  Tim

  Hey Buddy,

  RAM upgrade is not a problem because it is easy and can be done in a few minutes.

  Satellite R630 has Intel HM55 chipset, and the maximum capacity is 8 GB. This means that you can install 4GB module in each memory location. Also an upgrade to 4 GB is not a problem, you can keep your 2 GB module and just buy a new 2 GB module. The module DDR3-10066 part number is PA3676U-1M2G.

  If you have more questions just after, again :)

• Satellite C670D-10W - RAM upgrade

  I recently received a Satellite C670D-10 w, which has 2 GB of memory. I would like to add a module of memory, but I can't find any mention of this on the site of toshiba of what kind, etc.
  Other that, 'don't use that toshiba has approved' modules.

  Can which module I get for this machine?
  TNX

  Hello

  For the RAM upgrade, you can use follow RAM modules:

  1 GB DDR3-1066 PA3675U-1M1G

  2 GB OF DDR3-1066 PA3676U-1M2G

  4 GB DDR3 - 1066 PA3677U-1M4G

• 17 - p120wm: hp laptop 17-p120wm RAM Upgrade DIY or shop service

  I can't find information about the max ram upgrade or how to remove what I can buy new ram and install it myself.

  It has the factory installed 4 GB SDRAM DDR3L (1 DIMM).

  I use a large workshop and if I can't install it myself they will for me when I can buy the max ram for this model.

  Thanks in advance for your comments.

  KIM

  Maximum RAM memory supported 8 GB

  Memory SODIMM slots two - NOT accessible customer / extensible DDR3L-1600 dual channel support DDR3L-16009 single channel support DDR3L-1333 channel simple Support (DDR3L-1600 downgrade DDR3L-1333) supports up to 8 GB of RAM in the following conƭgurations & #29;

  Total system memory of 2048 MB (2 048 × 1).

  Total system memory of 4096 MB (4096 × 1).

  Memory system total 6144 MB (4096 x 1) + (2 048 × 1)

  8192 MB total system memory (8192 × 1).

  Service Manual:

  http://support.HP.com/us-en/product/HP-17-P100-notebook-PC-series/8499335/model/8888513/manuals

  http://h10032.www1.HP.com/CTG/manual/c04777516

  Kind regards.

• Satellite 3000 - X 4: Question about RAM upgrade

  Hi all

  I'm looking for more information on how to upgrade the RAM for my SATELLITE S3000 - X 4 (120 MB RAM, 14 GB HD I think!). Here's a little history...

  This laptop is about 5 years old, and I'm hoping to speed up a bit. I don't want to buy a new computer because she usually serves my needs.

  I emptied my hard drive files and unwanted programs. And I ran Jv16 Power Tools to clean the registry and minimize starts the process.

  It's always a little slow and if I am considering upgrading the RAM because I think I can do this for about £50. My questions are:

  What type of upgrade RAM should I look to buy? (This laptop have 2 RAM "plug-ins" or just one?)
  What is the size of RAM upgrade is the maximum an S3000 - X 4 could face?
  Could a novice like me to adapt to the style DIY upgrade?

  Thanks for any help you can offer!

  Gabrielle

  Hi Gabrielle

  He is old enough. I looked for some info, but unfortunately I n t have not found much. The device can use the 512 MB of RAM, and you can use 2 sticks of memory. I'm not 100% sure but I think you can use the module with tracking number PA3086U - 1. 25 M.

  The unit is not known to me but please check the underside. On most units, you can find coverage of memory.