Dims laptop monitor by itself

Hello

I have a laptop HP ENVY m6 and I've recently updated to windows 8.1 and noticed a problem. My laptop screen fades to himself and becomes a sortof bright / not so beautiful in color. The window border becomes more bright and gross to research as well. When I open the notebook in a maximized window, the colors of the window border and everything becomes more enjoyable and better color quality until I have play it down and go to the desktop or another program. It is really annoying and makes the game of games on my pc not so pleasant.

Reality: I didn't belive it's a graphics card problem. I have a second monitor hooked up to the color and the laptop runs very well on it.

Its not noticeable to screenshots of office or records. Just my opinion on the outside.

I hope someone can help!

Fixed, after doing some research more that I fixed it

Tags: Notebooks

Similar Questions

  • Satellite Pro A300 - USB laptop monitor noise

    Hi all

    Had a problem every time I got back the lid of the laptop a bit beyond the vertical position - he makes her a USB device makes when it is plugged in.

    He can not understand why, but started the device built-in photo and with now I pushed the laptop monitor slightly and the camera exploded... Any ideas?

    Its still under warranty.

    Thanks in advance

    I agree with Akuma.
    Satellite Pro A300 is the new laptop model and you should do is contact the service and let check what the problem is here.

  • My laptop turns off itself Compaq presario c500

    My laptop turns off itself Compaq presario c500

    This may be a problem with the power supply for laptop. Power drain the computer once and then check to see if the same problem still exists. In order to drain the computer, disconnect all external devices from the computer and also to take the charger and battery, then press on and press and hold power for 30 seconds and release.

    Also a BIOS update if available on HP.com for model laptop.

    You can also see the computer in BIOS. Power on the computer and immediately, press the F10 key to load the BIOS, and then leave the computer as it is in the screen of the BIOS for some time and check if the computer turns off again and if it still cell phone off on its own while it is in the BIOS then contact HP and arrange for the service on the computer

  • Resolution with HP2311x and HP ProBook6455b series laptop monitor configuration problem

    Hello

    I have a problem-solving with portable HP2311x and ProBook6455b.

    Maximum resolution is 1024 x 768

    Current display driver is ATI Mobility Radeon HD 4200

    However, my HP monitor supports the 1920 X 1080.

    I used only the external monitor without using the laptop monitor and the maximum resolution is always 1024 x 768.

    I also downloaded the drivers recommended by HP, but it does not solve the issue.

    I also tried with the drivers provided by AMD, but I get still more low resolution (1280 x 768) because the driver software detects is ATI Mobility Radeon HD 4250

    When I try to use the AMD Vision Engine Control Center stops unexpectedly

    I have conteacted
    Portrait Displays, Inc..
    http://support.portrait.com

    But they suggested me to contact HP because they were not able to solve my problem.

    Any help will be appreciated.

    Kind regards.

    1. number and product name
    • HP ProBook 6455 b and HP 2311 x

    2 operating system installed (if applicable)
    • Windows 7 64 bit

    3. error message (if any)
    • No error message

    4. all changes made to your system until the problem occurred
    • No change

    Hello antgfig,

    Your ProBook is a business model.  Your question would better answer on the HP Enterprise Business Community Forum

    Good luck!

  • My Acer laptop stop by itself due to overheating, where can I get it checked/fixed?

    My Acer laptop stop by itself due to overheating, where can I get it checked/fixed?

    Because my laptop is already more than 3 years old (out of warranty), I opened it up with the repair guide.
    I am amazed at what I found: dust clusters as a foam - like substance that blocked the ventilation. I remove the dust and my laptop works fine now

  • My computer laptop monitor works, but does not have the windows desktop.

    original title: my laptop monitor works, but the windows on desktop are not displayed. The desktop appear correctly in safe mode but not in normal mode. Any suggestions?

    Running windows XP media center edition on an HP laptop. AMD Turion 64-bit dual core.

    Hi Prohoss,

    Follow the steps in this document to perform a System Restore. You will need to start safe mode to perform the steps.

  • computer hello__my laptop turn off itself

    I'm just why my laptop turn off itself, because today ' today I was connected to Skype, I was talking with my family, but all of a sudden it turned off I don't know what is happening... can you please tell me what's happening.. .thank you

    Another thing is this may be WHAT BIOS is configured to shut down the PC at the same time. Which battery is low or adapter will be disconnected, and then PC also turns off. Some malware can also turn off PC, in order to check this run full scan with your anti-virus and see if something might detect.

  • When I disconnect the monitor Samsung, laptop monitor loses the office.

    I use a laptop Toshiba Satellite L645-S4102.  I have been using an external Samsung monitor for a while.  I need to use the laptop for a presentation only.

    I can change to the screen of the laptop or use the Samsung monitor and the laptop monitor as long as my computer is connected to the Samsung monitor.

    But, when I disconnect the monitor Samsung, laptop monitor loses the shortcuts on the desktop and the taskbar and shows only the background.  I tried to restart the computer, but the same thing happens.  As soon as I reconnect the Samsung screen, everything happens very well again.  Ideas please.

    Start with the extra monitor connected and used.  Then go to your desktop and follow the instructions below:

    1. Click background, choose the resolution of the screen.
    2. In the graph at the top, click on your laptop screen (if you don't know who is who, click "Identify" and click the monitor displays on the screen of the laptop).
    3. Check the box "use as primary monitor" and then apply the change.

    The bar of tasks and other items still show on the main monitor, so this will ensure that your laptop screen is considered to be the main.

    If necessary (unlikely but it could happen), repeat these 3 steps again when the additional monitor is disconnected.

  • The laptop monitor goes black after the external vga connection screen

    Hey,.

    I have a Qosmio G50 - 10H, Windows 7 32-bit. After connecting to an external monitor, the internal laptop display becomes almost black. It is possible to see some items on the screen, but it is dark gray to work on. It does not much adjustment of color or brightness (black to very dark grey). The main problem is when disconnecting the external monitor monitor internal still is dark gray and still does not have many adjustments. It's so dark on the adjustments of brigthest that it is impossible to work. I downloaded the latest version of the driver for the support, but still the same problem.

    Any suggestions?

    It is somewhat strange.
    You can switch between LCD and external monitor by using the FN + F5 key combination?
    If you can switch to the LCD only again everything OK?

  • Satellite A135-S4467 - LCD is dim - external monitor is fine

    I can see my desktop if I shine a screen have screen LCD flashlight and if I plug an external monitor everything works fine.
    Programs and everything works I just can not see the screen on the LCD screen.

    I am new to this so if someone can tell me what to check and how to check and fix if possible he greatly appreciated wioyuld.

    If anyone has had the probklem and what have you to do? Where can I find a repair manual or tips and tricks online.
    My warrentry is 2 weeks out of date.

    Thank you in advance.

    > I can see my desktop if I shine a flashlight on the screen LCD and if I plug an external monitor everything works fine.

    This problem resembles a failure of inverter FL.
    The FL inverter is part hidden somewhere close to the screen.
    It controls the backlight of the display.

    I think that this part needs to be replaced.

    In your case, I recommend you contact the ASP in your country. Why?
    Because first of all, you can order these parts to the authorized service partner and second guys could be very useful and may disassemble the laptop and replace the part.

    Greetings

  • HP Envy laptop: monitor external (2nd) lost after BIOS update

    Hello.

    This is the 2nd time this has happened. Once, an online agent was able to solve the problem. I recently did an update of the BIOS and after the update, my laptop is not detecting my 2nd external monitor. I tried to manually edit the graphics card but nothing works. Any ideas?

    Thanks for the reply.

    I have the problem of the manual recovery of the BIOS.

    http://support.HP.com/us-en/document/c02693833

  • HP G71-340us: my laptop monitor G71-340us

    My laptop works fine with an external monitor, but laptop screen is dead. I replaced the cable of the monitor and the video. Any help?

    Sorry that I have not get you back sooner, I had trouble with my iPhone. I finished to bring it to a technician and discovered that the video chip had to be reballed.

  • HP Pavilion 22xi: HP Pavillion 22xi monitor tunrs itself after 1-3 minutes.

    Hello so I use my monitor for 1 year.

    It never happened until 9-10 months later when I played computer for like 10 hours.

    So my monitor turns off after 1-3 minutes.

    To activate it, I need only press the button.

    But its very annoying.

    I tried to switch the VGA/DVI cables, but I makes no difference.

    My mother extended 3-year warranty, we are planning to share my i don't know maby broken monitor one again.

    If necessary.

    			 

    Hi there @RokutisGaming,

    I hope you find your experience of positive Support Forum!  It's a good place to find the help you need, other users, HP experts and other support staff.  I understand that your display is extinction itself after 1-3 minutes.  I'm happy to help you with this.

    Have you tried this display to connect to another computer and test it with this system? If so, you saw the same question?

    Have you tried a different display of the same type cable?

    Also have you tried using another video port on the screen?

    Please let me know the results.

  • My Vista laptop turns on itself?

    My Vista turns on itself randomly. I wake up in the night to the sound of my laptop turn on. How can I solve this problem? Thnx in advance?

    Look at Hibernate settings to see if you can customize what action wakes the computer. Or Windows Update to do its thing, when you know that the machine won't be in hibernation. Aside from that, I am of the ideas. Sorry I was not able to help you. MS - MVP - Elephant Boy computers - don't panic!

  • What should I do if my computer laptop monitor flickers to the point I can't see?

    I have a Toshiba Windows vista computer laptop purchased new in 2008, flickers to the point were I do not see what I do, I use a new external monitor right know and (external monitor) works very well.  Here are three videos I took on YouTube http://youtu.be/Iw02nQv2Yqg , http://, http://youtu.be/QJTmH7YdibM and http://www.youtube.com/watch?v=sMT3iFBHZ6g&feature=youtu.be .

    PS: I am also under UBUntu

    Hello

    You can try to download and install the latest drivers from site Web from Toshiba and check.
     
    If this does not work, you can contact Toshiba Support for strengthening with the hardware on your computer.
    http://www.Toshiba.com/Tai/support.jsp

Maybe you are looking for