Direct connection on the desktop - clients still losing access when the server goes down or rebooted service

Similar Questions

• access to the file on the server goes down

  following my directory tree
  
  -root-
  -file1.php
  -file2.php
  -file3.php
  -folder1 (dir)
  -file4.php
  -textfile.txt
  
  
  the following code works for the first three pages in the poster, but not the fourth.
  
  the fourth MUST be here for the other links work properly, I tried to use the fourth at the root, does not work.
  
  What is the correct syntax to allow script access to the files in the root directory when the command is executed with a folder that is located in the directry root.
  
  I tried
  
  ./
  ./.. /
  .. /
  and with no attack. or / of
  
  None of them work for all four pages.
  
  not sure but will try would this work if I use the COMPLETE system directory?
  
  It's what code that I use and that works for the first three pages. but not the fourth.
  
  $names = @file ('textfile.txt');
  $rand_titles = array_rand ($names, 5);
  
  
  I hope someone can help with this problem.
  
  Thank you.
  
  

  Well, it was an afterthought and it woks...

  Follow the path of COMPLETE system to a working file.

• Unable to connect to the server on Money 2006 and have not changed the password

  Money 2006 can not connect.  The server is down?  I have not changed my passwd.  Help!

  Original title: Money 2006 cannot connect. The server is down. I have not changed my passwd. Can you help me

  Money 2006 can not connect.  The server is down?  I have not changed my passwd.  Help!

  Hey oldturkeyhunter

  you will get the best support if repost you in the forum of money microsoft specific to the link below

  Use this forum to discuss Microsoft Money. This includes money, more and more older versions.

  http://social.Microsoft.com/forums/en/money/threads

  Walter, the time zone traveller

• "Direct connection to the desktop" and external clients

  Hi all

  I'm doing a View 4 u1 installation with a connection to the server and a security server. I just want to confirm with the setting to view administrator, check box "direct connection on the desktop.

  I find that if I check it, then external clients of internet do not work - can see the office pools, but at launch, the customer will see appear in the taskbar, disappear. When I uncheck, all external clients work very well.

  my understanding is that this check box determines whether RDP traffic will be dug by the connection to the server or it will go straigh from the clients to view offices. I though that this setting affects only internal clients. I don't see how it affects external clients that connect through the Security server.

  When you look at 'netstat' of external clients, trying to run the office, I can see the threshold to appear when the customer view disappears, it will also disappear. Looks like when the box is check (direct connection), the client view external attempts to establish the RDP directly on desktop computers, apparently, it won't work. So, how can a direct connection for internal clients only?

  TCP 192.168.20.2:56473 winxp - 04:ms - wbt-Server SYN_SENT

  any ideas?

  Thank you

  Ming

  In our environment, we have our external users (Security Server) use a broker who has direct connect disabled while internal users use a different set of brokers that are defined to use direct connect.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• PCoIP connections directly on the desktop or via the connection to the server?

  Hello

  I have install a single view connection server and office pool and I can connect to the pool very much using the customer view pointing to the login server.

  I recently added a second login server replica and if I try to connect via the customer view succesfully authenticates, allows me to choose a pool, but errors and then with "the connection to the remote computer has ended."

  Look at newspapers in firewall, can I see traffic blocked from my desktop PC (where the client to view runs) to the IP address of the VM on the port office 4172. Of course, I can open this port, but I do not understand why this should be necessary when using the first server likely traffic goes through the connection to the server, not directly to the customer. The behavior looks different during the passage through the replica, but I don't see why this would be the case?

  You can enable/disable tunneling with a broker for connections setting.  Maybe the second broker (replica) does not make any tunnel and trying instead to go directly through your PC.

• Direct connection to the view Agent Linux?

  Is there an implementation linux plugin for direct connection from the view of the PicoIP client (I use VMware View on Mac) on a Linux desktop?

  I just wanted to put in place a set of virtual machines Linux to be accessible by customers to view, Mac. Also intend to do not use a view connection server. I installed a virtual machine to test with Ubuntu top end and configure the Agent as well.

  Direct connection is not supported. You must configure a login server in your environment.

• Internet does not connect unless it is directly connected to the computer

  This problem occurred yesterday.

  Internet has suddenly stopped working. Things were going to turn power off, then on and distributed. I did check the lights on the modem and the router, but they were all working well. I have plugged on both computers. This does not solve it. I called Charter to see if there was a failure. Unfortunately, it's a message auto troubleshooting which I have materialized with. He had me hang my modem directly to my computer. This solved my problems of the internet.

  I went to sleep for the night in the hope that the internet, or what the question was, would fix itself. He did not. The internet still works only if it is directly connected to the computer.

  There are other people who need to use the internet here. (Invoices, work schedules and other) So maybe it's very much a problem. Any other computer or phone, will work in the House.

  What is a router problem or a cable, or...?

  If your connection works when you plug the modem but not through the router, this indicates a problem with the router.   This could be a hardware failure or a configuration problem.  A problem with the cable between the modem and the WAN port on the router is possible, but unlikely.  It wouldn't hurt to check if she.  Most routers have a reset button recessed.  I suggest that you reset the router and reinstall as if new.  If this fails, you probably need to replace the router.

  Depending on your technical knowledge, you can also log in to the router and check the status information.

• How is the View Client to connect to the server has failed?

  Hello

  I have already set up the laboratory of Horizon view. But when I was about to connect to VM via View Client, an error message appeared.

  Pls check the photos attached. It seems that view Client connected to the server, but the recovery failed sources to the broker. And the average while servers introduced a healthy state in administrator mode.

  Step:

  1. launch View Client and login entry server IP address.

  2. a box will appear that him want to make sure that the server cannot be trusted. Then click on "continue".

  3. Enter the credentials, and then click "connect" button

  4. the error: "error: invalid server URL.

  What happened there? I have worked all day, still can not understand.

  No matter which help out me? Thank you.

  Step 1:

  

  Step 2:

  

  Step 3:

  

  Don't know if "_" is valid in a FULL domain name, try something else which corresponds to the period of investigation.

  Linjo

• Horizon View Client 2.2 cannot solve the short hostname to connect to the server

  Not sure if it worked in previous versions, but version 2.2 client view Horizon doesn't seem to be able to resolve the short hostnames to connect to the server.  The FULL domain name or the IP address works fine however.  Here is my config:

  VMware vCenter 5.1. U1 (Build 1064983)

  VMware ESXi 5.1 U1 (Build 1065491)

  VMware View 5.3.0 build-1427931 (1 connection to the server)

  (currently without using composer)

  The servers view and vCenter are virtual machines running on Windows Server 2008 R2 Ent. SP1 64-bit

  My laptop is running Windows 7 Ent. SP1 64-bit (6.1.7601) and I am running View Client 2.2.0 build-1404668.

  DNS seems to work very well on my office and all VMware servers above.  I do a nslookup the hostname of short-sighted connection to the server from the cmd prompt.  The field is defined and in the list of search suffix on each device and the short host name seems to work in all of the other apps on my desktop.  Not facing DNS problems with other applications.  Even the vSphere client accepts a short hostname for the vCenter server.  I know that I can use the FULL domain name or IP address, but I'm just curious to know which prevents the short host name to work in the view client and can it be resolved?

  -Chris

  Yes, the issue was identified internally. View Client used a 3rd party library and it has limitation which results in this problem. Up to now, we are not sure that the fix will be involved in which version. But we follow the problem and get back to you as soon as we have a few farm update.

  Thank you

  Felix

• vSphere Client could not connect with the server

  Hello

  I just built a new server ESX 4.0 (update1) and tried to connect directly from the VI Client.

  He keeps fails with the following error message:

  VSphere client could not connect with the server {ip address}

  Details: The server could not interpret the customer's communication... (The remote server returned an error: (503) server unavailable.)

  I can ping the server successfully.

  Has anyone seen this problem before?

  Thank you

  for many of my cases, it's just 2-3 minutes. can you do back to the rear for connection between the server and your laptop to see there is nothing between that is causing the problem?

• Flash Player is not to connect to the server policy file - still gives SecurityError #2048

  Hello

  I'm having a weird problem.

  Here's the situation:

  * I have a server that is running at http://192.168.0.179 . It serves as a file in flash, WebSocketMain.swf (of https://github.com/gimite/web-socket-js), who tries to make a socket connection to 192.168.0.179:5000.

  * I have a socket policy file server clocked at http://192.168.0.179:843 .

  * It works fine on the machine the server is running on (on OS X). Flash connects to the server policy files and on the server on port 5000.

  * However, on a Windows (64-bit) machine on the same network (192.168.0.175), running Flash 10.3/11.2/11.3 (and in the two Chrome/IE9), I get the following in the JS console error:

  LOG: Active [Websockets] Debug

  LOG: File [Websockets] strategy: xmlsocket://192.168.0.179:843

  [Websockets] Unable to connect to the Server Web Socket ws://192.168.0.179:5000/websockettest (SecurityError: Error #2048: security sandbox violation: failed to load http://192.168.0.179/assets/flash/WebSocketMain.swf )

  data from 192.168.0.179:5000.) Make sure the server is running and the policy file for the Flash shoe is placed correctly

  LOG: [Websockets] closed

  * I tried to modify WebSocketMain.swf to call Security.loadPolicyFile explicitly and not, but in both cases Flash Player will not even connect to the policy to 192.168.0.179 server. So it does not even attempt to read the policy file, yet still get the SecurityError.

  * 192.168.0.179:843 is opened from the machine.175. I can connect via a client Terminal Server (e.g. PuTTY) and receive the policy without problem file. However, FP simply does not want to connect.

  * I tried Security.allowDomain("*") and everything. Still nothing.

  * I tried to change the URL to which public Service will connect to (which is served by the web server) to 192.168.0.179:80. Nothing. 192.168.0.179:10000 does not work either. Even 127.0.0.1 and localhost does not work.

  I have more suggestions. This could be the cause? Why won't even try FP to connect to the policy server?

  Found the problem: mms.cfg had an entry saying DisableSockets = 1, which caused the security error.

• How to get the IP address of the client when TCP connect on the server

  How to get the IP address of the client when TCP connect on the server.

  The only parameter obtained the login is the login ID.

  I assume you are using "Wait of TCP on the listening port" on the server. This returns the remote address and port (like out in option).

• After a virus attack, I am unable to connect to the server from any client computer.

  I have a small net work in my house, and until yesterday, the network works well. MSSE has cleaned up win32 virus attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. Infographic customer request user LRN & passwiord against which I entered the data from the server connection, but it displays the sdame error message. PL help someone who will be widely recognized.

  Thank you best regards &.

  Gandhi Prasad

  original title: connection from the Client to the network problem

  Hello

  Your question (Windows XP) is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public Server on TechNet. Please post your question in the Windows Server Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• After an attack of virus on the server, I am unable to connect to the server from any client computer.

  After an attack of virus on the server, I am unable to connect to the server from any client computer.

  Applies to: Windows | Windows XP | Networking, Mail, and getting online

  I have a small net work in my house, and until yesterday, the network works well. MSSE clean virus win32 on my server attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. I used MS Fixit widjows firewall and then problem determination after the Client computer request user name & against which I entered the login data, password but it displays the same error message.

  PL help someone who will be widely recognized.

  Thank you best regards &.

  Gandhi Prasad

  Hello

  Because the problem is with the server, I recommend you post this question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• to reach a server on a VLAN that is not directly connected to the inside interface

  scénarion

  PIX 515

  6506 core with VLAN A, B, c. (intervlan routing is ok)

  vlanC is directly connected to the inside interface of the fw

  question

  How a crowd outside could reach a server ServerA on vlanA.

  Hello

  Concerning Point 1, Yes if the roads required for networks connected inside the network is done on pix.

  Concerning Point 2, if the IP address that you use within the network is routable (public IP), the command you gave will work. The command indicates that when 10.10.1.10 inside the network host wants to go outside the network, use the same IP address. Because NAT does not occur, the actual address of the server presents itself as the visible address and the address of the host. So if the IP address you specify is not a public IP address, outside world can't access.