"Direct connection to the desktop" and external clients

Hi all

I'm doing a View 4 u1 installation with a connection to the server and a security server. I just want to confirm with the setting to view administrator, check box "direct connection on the desktop.

I find that if I check it, then external clients of internet do not work - can see the office pools, but at launch, the customer will see appear in the taskbar, disappear. When I uncheck, all external clients work very well.

my understanding is that this check box determines whether RDP traffic will be dug by the connection to the server or it will go straigh from the clients to view offices. I though that this setting affects only internal clients. I don't see how it affects external clients that connect through the Security server.

When you look at 'netstat' of external clients, trying to run the office, I can see the threshold to appear when the customer view disappears, it will also disappear. Looks like when the box is check (direct connection), the client view external attempts to establish the RDP directly on desktop computers, apparently, it won't work. So, how can a direct connection for internal clients only?

TCP 192.168.20.2:56473 winxp - 04:ms - wbt-Server SYN_SENT

any ideas?

Thank you

Ming

In our environment, we have our external users (Security Server) use a broker who has direct connect disabled while internal users use a different set of brokers that are defined to use direct connect.

If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

Tags: VMware

Similar Questions

  • Direct connection on the desktop - clients still losing access when the server goes down or rebooted service

    I set up the connection to the server with a link Direct is TICKING, I did that once the initial connection has been made for the broker and an assigned desktop computer, connect directly to the desktop and so not care about the State of the connection to the server. After restart or just restart the VMware View Server service all customers lost access until it is facing up.

    Is it right, that we use View 3.1.

    Thank you

    It's strange that I can restart my server connection without worrying about all the users.   How brokers connection you have and do you have activated all at direct connection?

    If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  • Help on the portable computer connection on the desktop and router WRT610N

    I just bought a WRT610N and have loaded in my office which is not wireless and connected to my cable modem and the router on the desktop so that I can get the Wi - Fi of my wireless control internal Laptop Dell Insperion 1501.  My laptop shows my network I have install on the desk top and there are 4 bars green connection excellent, but it does NOT connect to the INTERNET.  How can I fix it?    Please help me sooooooonnnnnnnn.   Thank you very much.

    Try this,

    Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
    Let the empty user name & password use admin lowercase...
    For wireless settings, follow these steps: -.
    Click on the Wireless tab

    2.4 GHz wireless settings:

    -Here, select manual configuration... Wireless network mode must be mixed...
    -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

    -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
    Please take note of the name of the wireless network (SSID) because it's the network identifier...
    For wireless security: -.
    Click the sub-tab under wireless > Wireless Security...
    Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
    Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
    Please note the 1 WEP key as it comes to the security key for the wireless network...

    Click the settings advanced wireless
    Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
    Now let's see if you can locate your wireless network and try to connect... Make sure your wireless connection is st to obtain the IP address automatically.

  • Problems of peripheral connection to the Desktop Manager and Apploader.exe blackBerry Smartphones

    Just got a new BB8900 last Friday. On Monday, I met a Reload software: 552 error code and after checking online forums for options on how to fix I finally had to reinstall the operating system and reinstall the new applications, which are not checked by the resettlement process. Because I was afraid to become again this error when I rebooted the machine, I immediately made backups every hour I was reconfigure the device and adding my apps.

    Today I was going to do another backup for good measure, and once I have connected my Blackberry to the computer with Desktop Manager running, Desktop Manager crashed and gave me the following error message:

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: DesktopMgr.exe
    Application version: 5.0.0.11
    Application timestamp: 4a4bd539
    Fault Module name: DesktopMgr.exe
    Fault Module Version: 5.0.0.11
    Timestamp of Module error: 4a4bd539
    Exception code: c0000005
    Exception offset: 000d68f5
    The system version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033
    Additional information 1: c4a7
    More information 2: 473b2e845affd1758ca8e66121386d63
    3 more information: 83e8
    Additional information 4: 72466a8a5092651f7fe609f9ec3f3489

    I then tried the APPLOADER. EXE program location in program files/common files/research in motion/apploader. I had used this program yesterday to try to remove applications 1 by 1 with the hope that a single request was causing the error 552. Now for some reason any program as a problem to note the following in the error log file:

    Read 1010fffc location caused an access violation.

    I've looked through several forums and have not found a solution. What I can tell you is the following:

    (1) the phone works well, but I'm afraid by restarting the phone and another 552 error (there were two deleted apps that will be entirely deleted on reboot). Hope everything is fine but I got two of these 552 errors within 24 and the second came without any warning. If I get this error there is no way to make my backup since I can't connect to DM without it crashing.

    (2) it doesn't seem to be a timing issue, but I deleted the Intellisync folder anyway and it does not solve the problem.

    (3) have rebooted my machine without change to the problem.

    (4) have reinstalled DM Version 5 (this time without Roxio Media software) without change to the problem.

    (5) because now I get an error when connecting to DM and trying to run apploader.exe, there seems to be a setting on my phone which may cause problems (I don't know what it can be, but the APPLOADER program finds a violation of place then maybe the Blackberry software is confused about where to find my Apps?)

    (6) the BlackBerry Device Manager works fine and takes note of my device and the serial number it is necessary.

    After my last backup yesterday I probably only installed 3-4 other apps that I had lost and organized/moved files on the phone. So get this problem if shortly after that everything worked fine is staggering.

    Another update: it seemed to me I found the problem.  While RIM support recommended I do a reset, I pushed the rest of the phone feature seems to work very well.  I opted to start removing the one phone applications and then try to connect to the Desktop Manager.

    Once I removed the ZDNet Tech News For the IT professional and rebooted the phone, I was able to connect and make a backup. I'm sure this app works very well for almost everyone, but for some reason (maybe it is in conflict with another application on my phone), Desktop Manager does not do that and close. Initially, I reinstalled again and was able to make a new backup but an hour later Desktop Manager stops again (perhaps by doing an update on the news it creates a conflict with the Desktop Manager).

    Indeed summary of learning since my problem seems to be quite uniqueCurve 8900)

    (1) if the Director of bureau stops and you have tried other solutions on the forums such as deleting the folder Intellisync and reinstalling Desktop Manager, try to remove applications 1 by 1 and restart the phone before trying to connect again to Desktop Manager.

    (2) If you have had this problem, frequently make backups and keep track of what you add to your phone in case there is a problem you know the latest apps to remove (in my case, I couldn't go to my last backup since DM would be closed with the conflict of the app).

    (3) only consider a wipe of the device if you have exhausted your apps withdrawal tests.  Apps that came on your phone which notes the seller in the section about the application that RIM should be good.  Also while on AppWorld apps are offered by BlackBerry, there is no certainty that they will work on your phone.

  • Windows goes directly to the desktop and not the boot screen.

    . My computer just updated windows 8 and now it goes directly to the office when an application instead of tiles to apps closing.  How to stop

    It's an easy fix, once you know what to look for.

    Go to the desktop and right click on the taskbar. Click Properties,

    On the first tab, there is an option to "See the Windows Store apps on the taskbar" uncheck the box.

    Then go to the Navigation tab uncheck "Boot to the desktop."

    That should do it. If it is not, please let me know.

  • Direct connection to the view Agent Linux?

    Is there an implementation linux plugin for direct connection from the view of the PicoIP client (I use VMware View on Mac) on a Linux desktop?

    I just wanted to put in place a set of virtual machines Linux to be accessible by customers to view, Mac. Also intend to do not use a view connection server. I installed a virtual machine to test with Ubuntu top end and configure the Agent as well.

    Direct connection is not supported. You must configure a login server in your environment.

  • To connect to the desktop from the internet view

    Hi all

    I recently installed a view connection Server 5.0 and a manual pool with a single desktop computer in order to access my VMware infrastructure while I'm not at home.

    I redirected the port 443 and 4172 access to connect to the server view and I am able to authenticate but the customer view freezes when I connect to the desktop computer because she needs the internal ip address of the office.

    I don't understand the principle of the use of the customer in view of the internet while each connection to the servers or office uses the internal ip or FQDN address. What did I wrong? What should I do to just plug in my office to view with the client from the internet?

    You must activate the tunnel and the tunnel of PCoIP on the broker for connections (on the admin interface > servers > Connection Broker) and specify the external URL (that you access from internet. for example, vdi.home.com, not the host name internal.)

    You must also specify the external IP address. Is that you expose to the outside.

    Linjo

  • All user accounts Windows XPrestricted open all of a sudden 'Map network drive' by clicking on the desktop and the "research" by clicking on any folder

    Hello

    you have a problem with my Windows laptop that left me speechless.

    I would really appreciate if someone could provide a solution or any ideas where to start fixing this, as I get close to return to the previous backup full system, but reluctant to do so as I have never done it before so I'm worried if it really works as supposed (Macrium and Ping).

    1. description of the problem

    All users of Windows XP (SP3) restricted accounts open all of a sudden 'Map network drive' by clicking on the desktop and the "research" by clicking on any folder, including My Documents.

    However, all accounts administrator work as before and also user accounts work like so usual, they are included in the Administrators group, with respect to the clicks of the workstation and records.

    In addition, the correct icons for 'Drive' and 'Record' are visible when connected as long as administrator but lacking when logged as long as user restricted when you check the file associations by "open the folder and then click on Folder Options in the Tools menu.» Click the registry file types list. »

    2 solution unsuccessful attempts

    2. google and tried the solution to manually change the registry entries from Microsoft: http://support.microsoft.com/kb/321186

    "
    Start the editor of the register (Regedt32.exe).
    Look for, and then click the default value under the following registry keys if this problem occurs with folders:
    HKEY_CLASSES_ROOT\Directory\shell
    If this problem occurs with drives:
    HKEY_CLASSES_ROOT\Drive\shell
    Click on edit in the Edit menu.
    Type 0 in the value data box, and then click OK.
    Exit the registry editor.
    "

    (Fixit associated meanings has also not working for some reason, says that the Windows Installer does not run, don't know if the same problem...)

    2B. and then also tried the fix "regsvr32 /i shell32.dll" at http://blog.chron.com/helpline/2005/10/double-click-opens-search-instead-of-folder/.

    After these steps, the registry under "Drive" and "Directory" information are as attaché at the end read somewhere there should be a "find" under lock and key, as I have, but don't know if the subkeys under 'Search' are what causes weird behavior.

    If anyone knows and could provide what the values for the registry values must be in a system that works, would be nice to compare to possible problems.

    Unsuccessfully, with what precedes, to solve the problem, but noticed through that:

    2 c. When you are logged in as administrator, I am able to see and modify the registry keys concerned with regedit, considering that when logged in as a regular user, I get an error that translates roughly as "the key could not be opened [consultation]?.» Error in opening the key. "for"Default icon"and subkeys 'shell' to 'Drive' and some subkeys under"shellex ".

    Oddly enough, this is also the case even if I "Run with" regedit as a user belonging to the Administrators group when logged in as a limited user.  Could be the mechanism of Windows registry access.

    Noticed that the small group 'Users' did not have access to "Drive". Grant read access, even as the "directory" and other registry keys next to them, for "users".

    Now see the values of registry as a limited user, but the problem persists. Do you really know what to try next, after spending hours Googling for answers.

    3 computer laptop environment and other factors

    3. don't know if it's related, but perhaps that coincides the time and the possible reason of sage:

    I had the problem two days ago described in "account Administor doesn't have access to some files and registry entries" to http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/XP/Q_27415496.html.

    Zone alarm free firewall prevented changing the key of HKLM\SOFTWARE\Microdsoft\Windows\CurrentVersion\Run.

    Which was fixed as in the article above tweaking of Zonealarm settings so that changes are allowed.

    3. the environment of the laptop:

    Acer Travelmate 8204 laptop

    Windows XP SP3 with virtually all updates of installed Microsoft.

    Recent issues (related?) with the .NET Framework 4 updates and the repair facility. FixIt against MS to install MS Update and the Application works and reveals no problems, but the settings from-> Panel-> Add or Remove Applications said that it cannot change or delete NET Framework 4.

    ZoneAlarm Free Firewall version: 11.0.000.057, prevented possible culprit get earlier access to the registry, uninstall?

    Norton Antivirus version recently installed 20.3.1.22, possibly in conflict with ZA or bug?

    content 'Repertoire' 3 c registry key.

    HKEY_CLASSES_ROOT\Directory]
    "AlwaysShowExt"=""
    "EditFlags" = hex: d2, 01, 00, 00
    "ToolTip"="prop: DocComments.
    @=""

    [HKEY_CLASSES_ROOT\Directory\Background]

    [HKEY_CLASSES_ROOT\Directory\Background\shellex]

    [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers]
    @= "{5E2121EE-0300-11D4-8D3B-444553540000}"

    [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\ACE]
    @= "{5E2121EE-0300-11D4-8D3B-444553540000}"

    [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\New]
    @= "{D969A300-E7FF-11d0-A93B-00A0C90F2719}".

    [HKEY_CLASSES_ROOT\Directory\DefaultIcon]
    @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
    00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73, 00, 68, 00,------.
    65.00, 6 c, 6 c, 33, 00, 00, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 2 c, 00, 33, 00, 00, 00, 00

    [HKEY_CLASSES_ROOT\Directory\shell]
    @= 'none '.

    [HKEY_CLASSES_ROOT\Directory\shell\find]
    "SuppressionPolicy" = dword:00000080

    [HKEY_CLASSES_ROOT\Directory\shell\find\command]
    @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
    00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,
    65,00,00,00

    [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec]
    @= "[FindFolder (\"%l\ ', % I ')] ""
    "NoActivateHandler"=""

    [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec\application]
    @= "Folders."

    [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec\topic]
    @= "AppProperties".

    [HKEY_CLASSES_ROOT\Directory\shellex]
    @=""

    [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers]
    @=""

    [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Advanced SystemCare]
    @= "{7C8D3E6A-13A6-4D8F-BF77-D267D0F9AC21}".

    [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\COMODOBackupUtility]
    @= "{FA66022E-2FE4-4A29-916C-84A0D8173FBB}".

    [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\EDSshellExt]
    @= "{29FF7AB0-BE34-4992-A30B-53A9D86EE239}".

    [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\EncryptionMenu]
    @= "{A470F8CF-A1E8-4f65-8335-227475AA5C46}".

    [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Eraser]
    @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

    [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\IObit Malware Fighter]

    [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Offline files]
    @= "{750fdf0e-2a26-11d1-a3ea-080036587f03}".

    [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Sharing]
    @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

    [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Washer]
    @= "{6EE51AA0-77A0-11D7-B4E1-000347126E46}".

    [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\WinRAR]
    @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

    [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers]

    [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\CDF]
    @= "{67EA19A0-CCEF-11d0-8024-00C04FD75D13}".

    [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\FileSystem]
    @= "{217FC9C0-3AEA-1069-A2DB-08002B30309D}".

    [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Monitor]
    @= "{7842554E-6BED-11D2-8CDB-B05550C10000}".

    [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\MyDocuments]
    @= "{ECF03A33-103D-11d2-854D-006008059367}".

    [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Nokia]
    @= "{416651E4-9C3C-11D9-8BDE-F66BAD1E3F3A}".

    [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Sharing]
    @= "{40dd6e20-7c17-11ce-a804-00aa003ca9f6}".

    [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers]

    [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\Eraser]
    @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

    [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\UltimateZip DragDropHandler]
    @= "{2F860D82-AF3C-11D4-BDB3-00E0987D8540}".

    [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\WinRAR]
    @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

    [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers]

    [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\Sharing]
    @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

    [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {1F2E5C40-9550-11CE - 99 d - 2]

    00AA006E086C}]

    [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {596AB062-B4D2-4215 - 9F74-]

    E9109B0A8153}]
    @=""

    [{ECCDF543-45CC-11CE - B9BF - HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\

    0080C87CDBA6}]

    [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {ef43ecfe-2ab9-4632-bf21-58909dd177f0}]
    @=""

    3D 'Drive' content registry key.

    [HKEY_CLASSES_ROOT\Drive]
    @= "Asema.
    "BrowserFlags" = dword:00000008
    "EditFlags" = d dword:000001 2

    [HKEY_CLASSES_ROOT\Drive\DefaultIcon]
    @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
    00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73, 00, 68, 00,------.
    65.00, 6 c, 6 c, 33, 00, 00, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 2 c, 00, 38, 00, 00, 00, 00

    [HKEY_CLASSES_ROOT\Drive\shell]
    @= 'none '.

    [HKEY_CLASSES_ROOT\Drive\shell\find]
    "SuppressionPolicy" = dword:00000080

    [HKEY_CLASSES_ROOT\Drive\shell\find\command]
    @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
    00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,
    65,00,00,00

    [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec]
    @= "[FindFolder (\"%l\ ', % I ')] ""
    "NoActivateHandler"=""

    [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec\application]
    @= "Folders."

    [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec\topic]
    @= "AppProperties".

    [HKEY_CLASSES_ROOT\Drive\shellex]
    @=""

    [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers]
    @=""

    [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Advanced SystemCare]
    @= "{7C8D3E6A-13A6-4D8F-BF77-D267D0F9AC21}".

    [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\COMODOBackupUtility]
    @= "{FA66022E-2FE4-4A29-916C-84A0D8173FBB}".

    [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\CWDDriveMenuHandler]
    @= "{CCEFA845-DCDB-4A2F-8BED-DBE87CD198EC}".

    [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Eraser]
    @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

    [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\GizmoShellMenuExt]
    @= "{AF859436-B9BD-4154-B594-2B8D1F4295A6}".

    [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Glary utility]
    @= "{72923739-5A47-40A3-9895-25AF0DFBB9E4}".

    [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\LavasoftShellExt]
    @= "{DCE027F7-16A4-4BEE-9BE7-74F80EE3738F}".

    [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Offline files]
    @= "{750fdf0e-2a26-11d1-a3ea-080036587f03}".

    [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ReflectShellExt]
    @= "{DEBB9B79-B3DD-47F4-9E5C-EA6975BAB611}".

    [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\SDContextExt]
    @= "{70F8E90E-353A-47AB-B297-C576345EE693}".

    [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Sharing]
    @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

    [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Symantec.Norton.Antivirus.IEContextMenu]
    @= "{FAD61B3D-699D-49B2-BE16-7F82CB4C59CA}".

    [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {59099400-57-11CE - BD94-]

    0020AF85B590}]

    [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {D6791A63-E7E2-4fee-BF52-5DED8E86E9B8}]
    @= "Menu of portable devices.

    [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
    @=""

    [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers]

    [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers\Eraser]
    @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

    [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers\WinRAR]
    @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

    [HKEY_CLASSES_ROOT\Drive\shellex\FolderExtensions]

    [HKEY_CLASSES_ROOT\Drive\shellex\FolderExtensions\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
    @=""
    "DriveMask" = dword:00000020

    [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers]

    [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\Sharing]
    @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

    [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ShellExt]
    @= "{0B0D0025-9D78-43BF-84EF-6F308AC4D0CE}".

    [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {1F2E5C40-9550-11CE - 99 d - 2]

    00AA006E086C}]

    [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {596AB062-B4D2-4215 - 9F74-]

    E9109B0A8153}]
    @=""

    [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {B 7988, 573 - EC89 - 11cf - 9 c 00-

    00AA00A14F56}]
    @=""

    [{ECCDF543-45CC-11CE - B9BF - HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\

    0080C87CDBA6}]

    [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
    @=""

    It seems that I managed to solve the problem on my own. Did two things:

    1 set the registry keys determine programs associated objects 'Répertoire', 'Drive' and 'File' to the default values by using the settings found here: http://www.dougknox.com/xp/file_assoc.htm

    HKEY_CLASSES_ROOT\Directory\
    HKEY_CLASSES_ROOT\Drive\
    HKEY_CLASSES_ROOT\Folder\

    2. If you want to have permissions for group 'Users' to read all these keys in the registry. For some reason any access worked only partly for standard users.

    Not sure who finally solved this problem, but after I had finished 1. and 2. for the purpose of 'Record', by clicking on 'My computer' and any folder works normally for all users of the computer.

    I suspect that some recent installation of program which adds actions associated with these objects messed up the registry. Suspects are Norton Antivirus and dbPowerAmp.

    Thanks for the suggestions for this problem!

  • After an attack of virus on the server, I am unable to connect to the server from any client computer.

    After an attack of virus on the server, I am unable to connect to the server from any client computer.

    I have a small net work in my house, and until yesterday, the network works well. MSSE clean virus win32 on my server attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. I used MS Fixit widjows firewall and then problem determination after the Client computer request user name & against which I entered the login data, password but it displays the same error message.

    PL help someone who will be widely recognized.

    Thank you best regards &.

    Gandhi Prasad

    Hello

    Because the problem is with the server, I recommend you post this question in the TechNet forum.

    http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

  • As this computer remote desktop connection cannot connect to the desktop remotely

    Sometimes, I try to connect to my desktop and I get an error and sometimes it works and sometimes does not.

    Why is this?

    This could happen if you use a Wi - Fi connection with network problems, if some of the data is lost in transit.
    You can run this command to see if there is packet loss:
    ping-l 512 f - n 100

    It will send 100 queries and should receive 100 responses from the remote computer.
    If get you all "Request timed out" messages, then this might be a firewall is not blocking the pings on the remote computer.
    If get you one or more "Request timed out" messages, then this might be a network problem.

  • Remote assistance - unable to connect to the desktop computer using the remote connection

    Hello

    I'm currently running vista Professional 64 bits for portable and desktop computers.

    Problem:
    -I am not able to connect to the desktop computer by using the remote connection.

    Tried:
    -Setup the remote asstance for the Username (account login) designated
    -looked up the IP address
    -entering the IP then username and password
    Failed connection *.

    Little Question, too:
    -I run behind a router with 3 machines connected to the router, it would change my location from IP address? I think that's where I'm stuck at.

    The following article should you guide through the process and solve your problems:http://www.vistax64.com/tutorials/116361-remote-assistance.html.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve the issues___Thanks__Peter

    I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems

    Thank you
    Peter

    Hello

    The easiest way is with a crossover cable - a special wire to connect the two systems.
    You can get one at your local computer store - they are not expensive.

    Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
    set up the network.

    ====================================

    Or you can set up a wired or wireless network.

    Setting up a network home
    http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

    Home network, wireless network and computer networking Made Easy
    http://www.home-network-help.com/

    Windows Vista tip: How to install and connect to a wireless network
    http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

    Ad-hoc networking
    http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
    Set up a computer-to-computer (ad hoc) network
    http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspx

    How to set up an Ad Hoc wireless network in Windows Vista
    http://www.home-network-help.com/ad-hoc-wireless.html

    Create an ad hoc WiFi network secure on Windows Vista
    http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htm

    Networking tutorial home
    http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
    Practically networked - everything you could possibly want to know.
    http://www.practicallynetworked.com/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • BB link 1.1.1.26 software BlackBerry cannot connect to your BlackBerry ID confirm you are connected to the Internet and try again.

    I'm having a problem with BlackBerry link 1.1.1.26.  I installed, removed and reinstalled several times and have not been able to find a solution.  Once the link is installed and I have running, click on the "Sign In" button and then showed up with an error message saying "unable to connect to your BlackBerry ID."  Confirm you are connected to the Internet and try again "(Win 8 64-bit) office is certainly connected to the internet, using for this post as we speak.  Configuration of simple network DSL modem, router and wi - fi, no firewall company or related issues.  I tried to disable the firewall, and windows defender, reboot and nothing seems to work.  Once I had it connect after a new installation, but the next time I loaded, he was presented with the same error.  Does anyone have any ideas or patches?  Get very frustrating and want out of the file sharing facility.

    Thanks a lot for your help!

    Rick

    I was able to get the link to work yesterday by doing a complete uninstall of the BB and BB Desktop Manager link.  Restart, running a registry cleaner, by restarting again and do a new installation of link BB.  It now seems to work.  I tried a few times and after several reboots it always seems to work.

    Yes, I had checked before the windows firewall State, and there has been exceptions for active link.  I also tried turning off the firewall completely and windows defender, but which had not worked.

  • USB connection to the desktop

    Hello world

    I tried to get a similar but empty post came.  Here's the scenario.  There is an application on the device and an application on the desktop.  They communicate via USB which works very well for most.  I use:

    (StreamConnection) Connector.Open ("comm:USB; channel = "+ name);

    to save the channel of the device to connect to the desktop computer.  Once the two are connected, I can read and write to streams.  The problem is in the time between the opening of the connection and the connection actually put in place.  The application of device cannot be upward to be listening to connections so it could be some time before the connection is established.  I can't be able to be informed of the connection be established.

    Is there a listener that I can use or call Connector.open in a way that would inform the code that the connection has been established?

    Thank you in advance,

    Jakub

    I'm not sure what you're asking here... but have you looked at the interface of USBPortListener?  It may provide what you are looking for.

  • BlackBerry Smartphones trying to connect with the desktop software for my blackberry

    Hey, M trying to connect with the desktop software for my blackberry torch 9800 and it asks password for the connection. I am using same unlock password I use for my bb but for desktop sofware it shows incorrect... pls help!

    Make sure that you type on your BB, it's what you type in DM. don't forget that the keyboard on your BB is different from the keyboard on your PC. Some people think they are type numbers on their BlackBerry when they are really typing the letters. For example, to use numbers on a BB you must hold the ALT for each button, you push so you have to hold the alt key while typing 1 2 3 4. If you hold down the ALT key on the BB you would really be typed all W E R S. sometimes, people will hit the ALT key once (and not hold the button) before they enter the password and then you get 1 E R S.

    Who is? Make sure that you do not mix numbers and letters.

Maybe you are looking for

  • 9.3.1 update messed up tactile response for my 6plus

    MY touch screen does not respond after the update I can do besides a hard reset?

  • Restart Manager - where can I get a windows installation disk?

    I have the Manager screen rebbot on my pc and says that I need a windows installation disc. I didn't when I plug the computer and didn't know that I needed to make a record after my purchase, I'm now completely stuck for what to do, I searched the in

  • AnyConnect 2.3.254

    Hello I have a problem with the new feature in AnyConnect 2.3.254 that allows to establish a VPN inside connection RDP of Windows XP SP2. I replaced the following string: "LocalUsersOnly" with "AllowRemoteUsers" in my profile.xml within "c:\documents

  • CERT

    Is anyway to get rid of the warning of the CERT. When someone connects wireless or I need real certs?

  • case #0216416607: V Vikrant

    Case #0216416607: Vikrant V