Direct sunlight on the display screen it will damage?

Hello

I have an almost new MBP 15 ". Direct sunlight on the screen it will damage?

I ask cause I'm sitting with my back to a window and for a few hours of direct light from the Sun will hit the screen if I shut the blinds, what I do, but there is less light in the room that I don't like.

The best

Elmer

No, but for me what makes the screen hard to read!

Tags: Notebooks

Similar Questions

  • Cleaning of the display screen

    What is recommended for the cleaning of the display screen?

    Steve,

    You can use Microfiber cleaning chiffonette and can clear the LCD screen of the camera. This will remove dust, dirt and fingerprints on the LCD without scratches or scratches and without the use of harmful chemicals. Don't use solvents or liquid-based cleaners.

    NOTE: A cleaning cloth can be purchased at any specialty camera store or order directly from the Web site of Sony parts and accessories sales or by calling (800) 488-7669.

    If my post answered your question, please mark it as "acceptable Solution".

  • Point on the display screen

    What does the point next to the battery on the display screen?

    Its state of the Rhapsody subscription.  Full point means a lot of time, until you have to connect to the computer.

    1/4 full means only a few days left.

    empty circle means securities subscription have expired and will not play until you connect to Rhapsody.

  • Icons wiggle and move in the home screen but will not go to the next page

    Icons wiggle and move in the home screen but will not go to the next page

    You need to move to the edge and hold the button for a few seconds so he can move to another screen.

  • Samsung TS-H653G DVD burner, I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully.

    I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

    I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

    Hello

    See how you go with this great piece of software.

    http://www.thewindowsclub.com/repair-fix-Windows-7-Vista-problems-with-FixWin-utility

    Concerning

    GT4U

  • How to print photos when the display screen is white? The image is missing in it.

    How to print photos when the display screen is blank?  It shows only a white screen empty when I select the photo and press on print.

    You click on a film image in the print module? And, I guess you don't have to go to the Print module, right?  Additionally, make sure that you have chosen to make a custom package.  If you chose the custom package you need to drag and drop images and organize them.

  • Shaking with lines across the display screen

    Hi, can someone please help?

    Having used my laptop the other night, I closed it. A few hours later, I opened it again to use it, and although he had not been touched, both lines have one appeared on the screen.
    We run about a quarter turn from the left, from top to bottom, and the other completely across the top.

    Also, the display keeps excitement up and down, shaking so I can't read it.

    Anyone know what this problem could be? And if she needs to be repaired is it covered by the standard warranty?

    Also there is no external damage and nothing has been done to the laptop - so I am very confused!

    Help, please.

    Problem may be defective.
    How to tell if the repair is covered by warranty when you didn t wrote what model of laptop you have and how old is it? But if you have the Satellite C it must be fairly new, so it will certainly be covered by the standard warranty.

    Check the expiry date of guarantee under the http://www.toshiba-tro.de/unitdetails

  • Portege M400: when the display updated drivers will be released

    I found quite a few bugs that appear to be associated with the display as the screen turned off driver and not coming back not upward and intel has a MUCH more recent display on his site driver so my question is Walker will be communicated to toshiba a new display driver for the m400 as the current one is pathetic because it is too buggy!

    I put t know what you expect, because on the Toshiba driver page I found a new display driver. The latest version at this time was 08/02/06. To me, this looks like a very recent version. I recommend you to check the drivers available on the Toshiba page first.

  • Shadows on the display screen

    My screen has shadows to the right of all the elements on the screen - how can I fix it?  I tried to restart and it has no effect - the shadows remain.  The show on all points of the screen - including on the desktop.

    Hello

    1. have you made changes on the computer before this problem?
    2. What is the brand and model of your computer?

    Try the following and see if it helps.


     
    Method 1:

    Method 2:

    Download and install the latest driver for the display driver.

    I suggest you to meet us with the screenshot, so that it will be much easier for us to understand what is the exact as scenario and help you to fix this problem.
    Capture the screen: http://windows.microsoft.com/en-US/windows-vista/products/features/snipping-tool

    Try this link for help to use SkyDrive to upload collected files and post screen shot/image
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65 

  • How do you change the display screens during execution of the program?

    I would like to have a LabVIEW screen with a list of test Vi to run, and then select one to display.

    In addition, then return to the main screen.

    Thank you

    Looks like a project...

    Side main VI:

    Creata a dropdown list (use ring/enum control) with list of the test screw...

    now, create an event "value change" for control... to capture the current value of the control.

    use of the VI attached as main VI...

    and sub VI

    on close event, get the reference of the main VI and use the property node 'open front'... to return to main VI

    or you can close VI main when you cal a test Vi and re open the main VI when you close any criterion VI...

  • Manually change the brightness on the display screen.

    How to change the brightness when the blue Fn key don't decrease the screen brightness but don't don't increase the brightness of the screen.  How to manually change the brightness of the screen without the keyboard shortcut keys (they do not work)?

    Depends on the brand and model of your laptop. Did you install drivers from the manufacturer, or done it with XP (assuming that you do not have XP) pre-installed. For example, on my Gateway laptop, Fn + F8 lights up the screen, and then if I press it again, it fades. Or with keys Fn + I can brighten it gradually, and Fn + darkens it gradually.

    You can figure out or dim the monitor in the video control panel (again, this depends on the manufacturer of card or portable video). Right-click on your desktop and choose Properties. Then go to settings, advanced and then (probably) the video card/chipset that is installed. Somewhere there may be settings to adjust the brightness or gamma of the display. Without knowing your material, I can't say for sure, but it would be the starting point.

    SC Tom
    -There is no such thing as TMI if you request technical support.

  • exalted lines bad pix on the display screen

    screen shows lines very bad horizontally across and make the display very choppy and sloppy.

    they are very spaced.

    Hello

    1. What is the brand and model of your monitor?

    2. you remember make changes to your computer before this problem?

    Method 1:

    Start the computer in safe mode and see if the problem occurs. Follow the steps from the link to start in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

    Method2:

    Try opening the display troubleshooter: Open the display quality problems http://windows.microsoft.com/en-US/windows7/Open-the-Display-Quality-troubleshooter

    Try also to update the display drivers: http://windows.microsoft.com/en-US/windows7/Automatically-get-recommended-drivers-and-updates-for-your-hardware

  • Dust from under the display screen blackBerry Smartphones

    He started without notice, but is now a nusance. The dust particles are piling up under the screen at the top and in the center of the screen. It is no longer visible when the display shows a background darker and in full sun. Is it possible to clean it?

    Barrycuda,

    Had the same problem with my first storm.  Unfortunately, there is no way to get the dust off can compressed air, vacuum, etc.  And once it starts it doesn't stop as if by magic.  I suggest take it to your business and get a replacement/new device.  Some people have tried to burst the screen goes to find that they crack then their carrier does not replace because they broke up it. Save yourself the headache and just bring it back.  At your made in the Canada?  Mine was and I read on several other forums that there were problems of productions with Canadian manufactured devices.  You can tell by popping the battery.  It says it on a sticker under there.  My replacement was made in the Mexico... no problem with this one.

    See you soon,.

    G

  • Options to change the display screen size are too large or too small.

    How can I change the display size to one I am comfortable with that? The options are too large or too small.

    Press the option key while you click chipped. Those are the only options available.

  • How can I get more of my character to display at the top of the display screen?

    Before you download the latest Firefox, my character at the top of the display showed at least 1/2 on firefox. Now, is that the ears. How can I show more of her? Stupid question, I know, but it's bugging me.

    I think you need to show toolbars as you can so that your character can have more space so it can be displayed more.

    How to show or hide various toolbars?

    Check and tell if its working.

Maybe you are looking for

  • How we prevent ads and video unwanted play when visiting Web sites.

    A few sites of news, but also other sites I visit have ads and nothing to do with boxes of video on the margins of the page which start automatically download and play when the page opens. How can I prevent them from loading and play? I am on limited

  • Sony offers CodesI

    I recently bought a VAIO E Series and it has a Google play Sony offers for 3 films and it includes 3 codes for it. However, when I get them, they do not work and are "invalid." How can I fix it? Help?

  • Repeat items in a stacked sequence

    Hi does anyone know how to repeat elements of a stacked sequence?  For example, if I want to repeat that frames 7-12, how would I go all this?  I was watching the State machines, but also to try to understand.  I thought that there could be an easier

  • What is the 'Downloads' graph supposed to show

    Hello, I got a free version of my app paid 24 hours.  Today, when I try to get a chart 'Downloads', he says 'no data exists for your app. What is "Downloads" supposed to make reference to the?  Is not the number of downloads for the app?  When I look

  • Problem with disk management.

    To increase the size of drive, I installed win 7 64 bit from a cloned on a WD Green 3 TB hard drive backup.  When I go to disk management I have the following: Disk 0: base / system reserve 1.87 GB NTFS healthy, "C:" 2046,13 GB NTFS healthy, no Boot