direct wireless 6500 has +.

Similar Questions

• OfficeJet 6500 a: cannot connect Officejet 6500 wireless network has

  I had my Officejet 6500 has connected to my computer cable for the past two years.  Now I'm setting up a wireless connection.  In the control panel of the printer, I have chosen settings - Web Services Setup - "Yes to allow to the Web Services-'Yes' to accept the terms of service.  So I wonder for a proxy address.

  I followed several older directions found in the forums on how to set a proxy address, but have had no success.  (Including printing the Configuration Page of the network, which was supposed to give me the IP address of the printer, but didn't).  There are indications to unplug the printer, while he was still on, then wait 30 seconds before plugging it in.  Then I tried to unplug the printer while still on, then disconnect the wireless router while still on, wait 30 seconds, and then plug in the router, leaving the network back to the top, then plug the printer back in.

  In the upper right corner of my control panel, there is a small symbol which seems to be the end of a cord.  So I guess that the printer is always set to a wired connection.  How can I reset for a wireless connection?  And when this is done, how to find a proxy address?  Thank you.

  Again, I don't know why you do not see these menus. I suggest you call HP directly now.

• HP 6500 has more wireless printer = > hp eprint does not not with pdf

  I have a brand new HP 6500 has more the wireless printer.

  I tried to print using hp eprint Centre by sending a pdf file as an attachment to the e-mail address of printers.

  But the printer don't like pdf and print an error instead, with the message below page.

  =======

  Please wait...

  If this message is not subsequently replaced by the good content of the document, your PDF file

  Viewer is not able to display this type of document.

  You can upgrade to the latest version of the Adobe Reader software for windows, Mac, or lInux by

  visit blah blah blah...

  =======

  I see that I have a recent version of the Adobe reader - Adobe Reader X - Version 10.1.0

  Please help and let me know if anyone has already had a solution.

  HP customer support -?

  Thank you

  Antony.

  Oh... Yes. It worked. !!

  Thanks Jack for your contributions, which helped a lot.

  The issue was not with the printer, but the PDF itself was a secure PDF document.

  I tried to copy the document from my pc to mac and I tried to open the document, and what I saw, it was exactly what was printed earlier in my first post.  Tried to attach my email and once downloaded, the document had only those got printed text (also pasted below).

  It works when printing directly from the pc more (with or without wire) finally got. Seems good now.

  =======

  Please wait...

  If this message is not subsequently replaced by the good content of the document, your PDF file

  Viewer is not able to display this type of document.

  You can upgrade to the latest version of the Adobe Reader software for windows, Mac, or lInux by

  visit blah blah blah...

  =======

  Thank you

  Antony.

• HP Officejet 6500 a Plus: how to allow access to the ePrint and still block direct wireless printing?

  My web access is on a public network that I can't control.  I feel ePrint installation and it works fine, but I have a number of people who directly print on my printer and wish to block this direct printing for the ePrint which I can control through allowed/blocked senders lists.

  Firstly, is it still possible?

  It it is possible, how do I do to fix this?

  Thank you

  Hi @Unhappy_Camper ,

  Welcome to the HP forum.

  I understand that you want to prevent other people from printing on your 6500 has more.

  Unfortunately what you would do, is not possible.

  Anyone on the network can see and use the printer.

• Problem with Officejet 6500 has more wireless on my Mac running Lion

  I just got the Officejet 6500 has more. I was able to make it work with my HP PC Windows XP (would not work with the radio, but it's probably a problem with this computer - connected very well with USB). But I don't see the option to add it on my Mac (main computer) running OS Lion. I'm completely updated on Mac software. I see my other printer as usual (also a HP) on Mac.

  Tried to reboot several times. I looked on the HP site to various articles and it seems that I might need to make an update of the firmware on the printer, but when I downloaded the software (on the PC), my printer is gray and so wouldn't let me - or does not need the upgrade. Then. I can't see the printer on the Mac and don't know what else to do. Ideas? Thank you... Is the printer on my wireless network - I can not see the IP address and others.

  I don't really know exactly what I did - added to the printer with its IP address and manually the software (added name - I also had a HP update tonight for the printer software, but that only did nothing), then printing I tried and it still would not work.  I used the adjusted IP address, which I found on the dashboard of Verizon. And for some reason, once I put that in manually on the printer, it remained there, even when in desperation I tried to put it back the "detect network" setting. Sorry - but this is not quite logical or in the order.

  Also, I restarted the router, then the printer. Somewhere among all the things I tried, to my amazement, it finally worked! At first, I saw the IP address as the name of the printer (which I had entered it), and then he asked to be changed to the actual model. I did it and it now seems to work. Here, I could tell exactly what I did, but perhaps in what I wrote, you will get a glow and know WHY it worked?

  I wanted to thank you again for all the time you spent to try and help me get this working. It is really really REALLY appreciated and I definitely click the congratulations for you! Thank you very much!

• How to print from my ipad to the officejet 6500 has more?

  I read that there may be something else than necessary. I want to print directly to the Officejet 6500 has more. Apple said ths is an Air Print printer able to do this. I don't take this monster out of the box until I know he will do what I want without a lot of trouble. Thank you.

  OK, so you were talking about requiring the update.  It is difficult to say that all depends on if it came with the new firmware or not.  It is not really relevant, however, because it will be updated as soon as Web Services.  This process takes a few minutes.  There is no computer necessary for the update of the firmware as long as the printer has internet access (which is directly connected to a router via ethernet or wireless).  Yes, a connection ad hoc, you will be able to print from the iPad, but you can use its 3 G connection instead of through your router.  It can only support a single WiFi also.  Go ahead and set up the printer and keep me posted on what happens.

  BTW - what is the problem with your PC that it cannot access the internet?

• Cannot print from Android phone to 2540 Deskjet using Direct wireless

  I try to print a document on my Android for my Deskjet 2540 phone using wireless live (so without a router involved).  I downloaded the HP ePrint app for my phone and have pressed the button wireless directly on the printer (the led next to it is on).  I enabled Wi - Fi radio on my phone and have made a link to my printer.

  But when I try to print the document (a pdf.doc) I get the following on my phone error message: no internet connection.  Please check your network settings, and then try again.

  Can you please help?  Thank you.

  Hi Kyle72,

  Welcome to the HP Support forums.  I believe that when your Android mobile device is connected to the direct wireless network of your 2540 Deskjet that you can access the document, and you get a connection error message.

  When you are connected to the direct the printer wireless network can not access the internet.  If the document you are trying to print does not live on your mobile device, you must copy the file to your phone to be able to print it.  I have included the link to HP Wireless PrintingCenter - HP wireless Direct.  He has a good summary on HP wireless Direct with instructions on how to connect to it and how to use it.

• Setting up my HP Officejet 6500 has more the Question: first install the disc?

  Hi all!

  I was wondering if I should install the disc that came with my HP 6500 has more printer FIRST before connecting it to the top wireless? Or connect upward wireless first before installing the drive?

  I saw somewhere where the plug & play when the connected printer caused some problems that did not accept the disc that came with the printer it seemed to replace the drive.

  Any help would be appreciated before doing anything with the hook to the top of my new printer.

  Thank you!

  If you connect the USB printer that the answer is YES.

  First run installation, during installation, you will be asked to connect the USB cable, then only, you need to connect.

  Kind regards

  Shlomi

• HP 6500 a Plus: HP 6500 has more won't copy

  This old all-in-one device has served reliably for many years until today.  It prints and scans but won't copy glass.  I unplugged the wall for 30 seconds and then tried a second time with the same results.  Help!

  Hi @nsbguy,

  Welcome to the Forums of HP Support!

  I see that you have problems of the flat bed scanner glass copy on your printer HP Officejet 6500 has more. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that this printer has been very reliable for you, which is nice to hear. I see that you are able to print and scan, but they are not able to copy from the glass. I guess that when you scan using the ADF?  If the printer is capable of scanning, it should be able to copy.

  To try to determine the cause, I will need more information.

  • Are you able to scan using the glass flat?
  • What happens when you try to copy?
  • What is the error message that you receive?
  • Are you getting what output it, or is it empty?
  • What you're trying to copy?
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  I would also try to update the firmware of the printer. Click here to download it.

  In the meantime, to help determine the cause, try the steps outlined in this document, HP Officejet 6500 has e-all-in-one printer series (E710) - copy and Scan outputs are completely black.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Officejet 6500 has the IP changes automatically

  I have a HP 6500 has more connected to a network using a router Netgear WNR 2000. The IP address of the printer continues to return automatically to one that is not compatible with the network. So, I can't print wireless.  HP technicians have tried to solve the problem but eventually says I need to replace the router. It is two years old. Is it possible to get the system to stay connected, that is compatible with existing equipment?  How?

  What IP address it back?  If its 169.254.x.x, this means that it is disconnected from the network and cannot re - connect.

  We will do this:

  -On the front of the printer: configuration > network > network by default.

  -In this same network menu, run the Wireless Setup Wizard to connect to your network.

  Now, let's set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is all high-end (.2 a.254.  We will use 192.168.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.

  -For the first DNS 8.8.8.8 and 8.8.4.4 for the second use.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• HP Officejet 6500 has more by using a different IP address than before

  I have a HP Officejet 6500 has more. Until yesterday, the printer worked wirelessly with my Mac OS 10.6.8 using the same IP address in IPv4 as the computer. I ran the HP Network Config page and it shows an IP address different today that it did. Is the message that I get when I send a document to print wireless: network host 192.168.1.101 is busy try again in 10 seconds.

  I checked the IP address of the printer and it is 192.168.1.100 (not 101). Therefore, they do not speak with each other. I treated all the solutions that I can find on the HP network to see if I can get the two survey periods to match and nothing seems to work. I turned off, turn off router, off modem, printer is off, turned off computer and lit them all back. No help.

  Any suggestions? Can I print using USB, but it's embarrassing.

  Something doesn't look good - maybe that I misunderstood... You say above, your computer and your printer had the same IPaddress and, when this is the case, you were able to print. Now, the printer and the computer have different IP addresses and now, you are not able to print. If this summary is correct, that then it seems to me that it should be exactly the reverse.

  If the IP addresses were the same, there is a conflict between devices, a bit like a mailman trying to deliver mail to two different locations which have the same addresses... What place receives the mail? It is normal for all network devices have their own unique IP address - how each device gets its own mail... or data packets.

  From the sounds of things, your printer is 100 but the MAC OS think its 101. Therefore, the print job is sent to 101 and never happens at the printer. You have two options... tell the OS that the printer is located at 192.168.1.100 or that, to avoid this problem in the future, on the IP address of the printer a static address, just guessing anything below 100, as 192.168.1.50 and then specify the operating system that the printer is located to 192.168.1.50.

  To make the choice of the latter, you must use your internet browser (Safari) and navigate to the 192.168.1.100 address. There is a web interface for your printer. Look for the network settings, then you can change the way that the IP address is obtained from dynamic (DHCP) static. And, after that, you need to find the IP of 192.168.1.50. It is also important to complete the subnet mask that will be 255.255.255.0. Finally, if your printer includes "web applications", you should also check the DNS addresses. You can use: 8.8.8.8 and 8.8.4.4 (Google's DNS servers) or 208.67.222.222 and 208.67.220.220 (OpenDNS servers)

  Note that when you save / apply the changes, you will lose your connection to the webinterface of the printer as the printer will have a new address. To return to the printer web interface, access the new static IP address.

  As far as to say where actually the MAC OS printer, the simplest option, as appropriate, is to use the HP tool to add a network printer or a device. To do this, AFTER you change the IP address. The HP software will scan the network printer and it should give you a result that shows the printer to the new static IP address. Installing and if possible, the name of the printer with a few references of "static HP or the"HPat192.168.1.50"set as default printer and remove the old definition of HP printer.

  The other option to speak the printer MAC must use Add a printer via system preferences > printer/Fax. I'm fairly certain that the MAC tools can analyze the LAN... in any case, it will be a more complicated procedure. Better for a user MAC more warned give assistance if you go this route.

  Hope this helps

• I have 3 PC home networking with a router. How to connect my new hp 6500 has more so any pc can print

  I have 3 PCs at home with one with XP 32 bit and cable to connect to a router Internet, the secoond PC with windows 7 64 bit and wireless to the same router and the third PC with XP 64-bit with the same wireless router. Currently, two have their own wired to their own printers. I want to replace the two existing printers with my newly purchased HP Officejet 6500 has more which will be located next to the XP 32 bit PC which has currently a cable connected to the router. How can I connect the new HP Officejet 6500 has more to my network to allow any of the three computers to print to the officejet and install the HP software on all 3 PC and if so what progs? I'm sorry if it's a very basic question, but I'm not a computer scientist and the help delivered with the printer documentation does not appear to this lay person to give this information on how to set up a home network with this printer. Thanks in advance for any advice.

  Mike4D

  Hello

  You can choose one of the following 2 options:

  

  Option 1: simila in the image above

  Connect the printer to the router,

  Connect a PC to the router (not wireless computer)

  Option 2:

  Connect a PC to the router (not wireless computer)

  Connect the printer to the wireless router

  Option 1 makes the computer without a connection to the printer. For the other two computer is the same on the two configuration options.

  Please use the following book to configure things

  http://h10032.www1.HP.com/CTG/manual/c00389927.PDF

  Kind regards.

• HP officejet 6800 e all on one: how to enable direct wireless printing

  Hello world
  How to enable direct wireless printing because my printer saying me that its disabled and I need to contact s Adminitrator or the person who installed the printer, which is me I did it by myself.
  So what is the solution pleaaaase?

  Hello and welcome to the HP support community!

  Press the "wireless Direct" icon on the control panel for your printer.

  Should look like this:

  If you press and hold down for 3 seconds, it should print the password to your devices (if the security has been selected).

  WyreNut

• How do to transfer article Microsoft Word for HP Officejet 6500 has more to print

  Could not find a way to print an article in Microsoft Word using my HPOfficejet 6500 has more. How can I transfer the article to print it directly from Word Microspft?

  What operating system? What version of Word?

  Generally, you need to select file, print, and then make sure the Officejet 6500 a is selected (not the fax device), select the appropriate properties and then select print.

• Impossible to update 6500 has more

  I have an Officejet 6500 has more than I bought the news about six months ago. I found that I can't update the firmware either wireless or USB. I spent about 3 hours on the a HP technician who was not able to solve this problem. This question has been sent to a higher level of HP support. I'm waiting for the return of their appeal. Someone have this problem with their Officejet 6500 has more? Have you found a solution.

  Has ever received a response from the level 3 support. Given that the HP support was not able to find a solution, I asked a replacement printer. It gave me the possibility of a replacement of 6500 or a newer model, Officejet 6700. I accepted the 6700. He should get in a few days.